Engineer Concrete

RASHID MAHMOOD KHAN

Contact No. +974********

E-mail: ***********@*****.***

QC Inspector / Material Inspector

OBJECTIVE:

Seeking for position as a QC Inspector / Material Inspector with recognized organization, where I can use my experience that would contribute to achieve Organization Goals and targets as well as to gain more experience to enhance my abilities.

Key Profile

More than 10 Years’ Experience in Material testing’s, Inspections and Quality Assurance & Control in prestigious Infrastructure projects, Bridges, Terminals, Expressways, Highways, Interchanges, Utilities Underground Pipeline, TSE Lines and Building Structures, in civil construction and Installation industry. I have excellent knowledge of International Standards

(ASTM, AASHTO, ACI, BS, BS EN & MRDTM, QCS 2014)

Proficient QA QC experience in Insitu and lab testing, NDT Non Destructive Testing, Quality Control in Pipes, Paints and Welding Joints

Committing to invest my knowledge & resources to meeting and exceeding the client requirements.

PERSONAL DATA

Date of Birth : NOV 06, 1988

Gender : Male

Marital Status : Married

Nationality : Pakistani

Language : English, Arabic (Working) Urdu, Punjabi,

Work Permit Status : Transferable ( Jobless )

Driving License : PAK, & KSA

EDUCATION

Highest Education : BS 4 year Program / Msc Geology

Course/Specialization : Engineering Geology

University : University of Sargodha, Pakistan

Professional Membership

Registered Engineer, Saudi Council of Engineers, Kingdom Of Saudi Arabia.

CERTIFICATIONS / Accreditation

(1) Super pave Mix Design Training Certificate,

(2) ACI 347 Guide to Formwork for Concrete: CH 2 Design, ACI 305R,

(3) Hot Weather Concrete,

(4) ACI Concrete Field Testing Technician Grade 1,

(5) ACI Concrete Strength Testing Technician,

(6) ACI Concrete Flatwork Technician,

(7) Walls & EIFS System Training (SAUDI BASF)

KEY Experience

•Materials, including concrete, aggregates, asphalt, bitumen, building stone, cement, cementitious material, concrete additives, masonry blocks, Piping Material paving blocks, rock, soil, steel, water, paint Testing

•Soil testing.

Absorption, Specific Gravity, Permeability, Field Testing, Load frames Testing, Porous Stones, Specimen Measurement, Atterberg Limits, Hydrometer Analysis, ASTM D 422/AASHTO T 88

•Concrete testing. Compressive strength testing, water permeability and absorption testing initial surface absorption testing, shimidt hammer testing Flexure Test Concrete Beam, ASTM C 78/AASHTO T 97

Absorption Test of Drilled Cores, ASTM C 497/AASHTO T 280

Absorption in Concrete Pipe (Set), ASTM C 497

Initial Absorption of Brick ASTM C 67

•Piping Testing : Pressure Testing for Piping, Gauge Testing for Piping, Acid Testing, Load Bearing Testing, Operation Test Pump System, Operation Test Generator, Cleaning Testing (Colorimetric Methods), Hydraulic Pressure Testing, Flushing,

•Cement Testing. Fineness Test, Consistency Test Setting time Test Soundness Test Strength Test Heat of Hydration Test Specific Gravity Test

•Paint Testing: Viscometer, Coating Thickness Gauge, Gardner Abrasion Tester

•Welding Testing : Bend Tests, Nick Break Tests, NDT Weld Testing, Acid Etch Test

•Bitumen & Asphalt Testing, DSR, BBR, DTT, RCAT, MSCRT, Wheel track Test Penetration testing on bitumen, Softening Point, Bulk Density Air voids

•NDT Testing. (Nondestructive Testing) (Liquid Penetrate Testing, Magnetic Particle Testing, Radiographic Testing, Ultrasonic Testing, Visual Testing, Infrared Thermal Testing, Tube Inspection, LRUT Testing,Automated Ultrasonic Testing

•Sampling and Testing for Concrete, Asphalt, Soil, Pipe Line, etc.

•Prepare Submittal of project quality plans, quality assurance plans, methods statement and material submittals

•Fresh concrete testing’s (i.e. Slump, Temperature, Bleeding, Air Content etc.)

•Hardened concrete Testing’s like Compressive strength, Flexural Strength, and Durability tests, RCP, CM, WP, IAST, WA.

•Testing’s of, Steel, Tiles, Pavers, Pipes and other Construction materils.

•Prepare ITP’s, Method statements, Project Laboratory Plan as per the Contractual Requirements

•Having sound experience practically in operating all apparatus relating concrete, soil,

Piping, welding & NDT testing such as NDT tests apparatus e.g MSCR, RTFO, VISCOMETER, GPS Unit (Handheld), Core Drilling,

Equipment (Concrete/Asphalt), (Liquid Penetrate Testing, Magnetic Particle Testing, Radiographic Testing, Ultrasonic Testing, Visual Testing, Infrared Thermal Testing, Tube Inspection, LRUTTesting, and Automated Ultrasonic Testing

Designing Experience:

Formulating Asphalt Mix Designs & Trail Mix for Bituminous Wearing Course (BWC)

Bituminous Base Course (BBC) Bituminous Binder Course (BC) layer either by Super pave or Marshal Method.

Concrete MIX Designs & Trail Mix for self-consolidating/compacting cement concrete (SSC) Mix Design by ACI 237R Method

•Formulate Aggregate Base Course ( ABC ) Design

TECHNICAL SKILLS

• Quality Control Testing Submittal Reports, Concrete Mix Designs (Light and Heavy Weight Concrete Mix), Asphalt Mix Designs (Marshall, Super pave Method), Laboratory and in-situ testing, Pressure Testing for Piping, Gauge Testing for Piping, Acid Testing, Load Bearing Testing, Operation Test Pump System, Operation Test Generator, Cleaning Testing (Colorimetric Methods), Hydraulic Pressure Testing, Flushing, Quality, Testing (concrete, asphalt, soil, water, Pipes, Steel), Detail line survey, Mapping, Soil Investigation

COMPUTER SKILLS / SOFT WARES

·Microsoft Office (complete command), Geo Orient, Surfer, Rock plot 3D software, Adobe Photoshop, Igpet software 2010.

WORK EXPERIENCE

UNIMAC (UNITED MAINTENANCE& CONTRACTING LTD). KSA

Duration: November 2016 to January 2019

Position: QC Engineer / Material Engineer

Project: Riyadh Metro Project Ksa

Client: AR Riyadh Development Authority ( ADA ) Ksa

RESPONSIBILITIES

Write inspection reports, worksheets, & equipment’s deficiency reports as

needed.

Perform hold witness surveillance inspection ad tests at site to ensure

Compliance with Saudi Aramco requirements and specifications.

Conduct technical meeting with other project team members to efficiency

address issue of concern.

Supervising crusher area, production area and coating area of concrete and

Asphalt.

Pipe material approved for use

Fixing methods approved for installation

All materials not being used are correctly stored

Check the bore log and soil report for poor ground conditions and high water table

Standard Bolt Tightening Torques

Testing of Pressurized water line

Performed pressure tests, checked electric installations, grouting inspection .

Check for stockpiles or heavy equipment near the edges of the trench, which may

Cause the trench to collapse

Check with the foreman to verify the crew understands the discharge procedures

and the equipment is available if pumping is required in Dewatering

Attending project managers meeting regarding the Metro Project and problems related asphalt pavement & production.

•Responsible for formulating Aggregate Base Course, Cement Concrete Mixes & Asphalt Mix Designs either by Superpave Method or Marshal Method as per specification requirements.

•Conceptualization, planning, & implementation of HMA Designs.

•Selection of quarries for high qualities of aggregate before blasting.

•Checking the production of asphalt & routine qualities testing.

•Checking Segregation & Temperature of HMA

•Deciding configuration of Crusher Units & selecting the size of screen

•Fulfilled all the requirements regarding the ISO STANDARDS.

•Visit Daily Working Sites in order to check the quality of work.

•Attend the weekly Meeting and update the weekly report to Head Office

•Prepare monthly material report to ensure that all works accomplished specification requirements.

•Monitor material testing asphalt, concrete, soil, aggregate, steel, piping,

•Water testing and if required any testing from outside commercial Lab

guides them regarding client satisfaction.

ROCKY COMPANY TRADING & CONTRACTING LTD. KSA

Duration: Dec 2012 to November 2016

Position: Material Engineer

Project: Highways, culverts, bridges, pipelines, Agriculture ROADS, KSA

Client: (MOT) MINISTRY OF TRANSPORT KSA

RESPONSIBILITIES

•Formulate and Assist Asphalt Mix Designs Bituminous Wearing Course (BWC) layer by SUPERPAVE Method SWEDRA –HAZRA LINK ROAD

•Formulate and Assist Asphalt Mix Designs Bituminous Wearing Course (BWC) layer by SUPERPAVE Method SHAMAISI – TIRAH LINK ROAD.

•Formulate Concrete Mix Design 250/20,350/20,400/20 for culverts and bridges.

•Controlling Soil quality with Waterberg’s Limit, Sieve Analysis, Proctor, CBR, Relative Density, & Field Density Tests

•Checking Aggregate with Sieve Analysis, Sp. Gravity & Absorption Soundness with Na2So4 or MgSo4, Abrasion, Thin & Elongated, Clay Lumps & Friable particles, Asphalt Coating & Stripping Tests.

•Checking asphalt quality test, Extraction, Sieve Analysis, Gmm, Gmb & Volumetric properties SGCE of HMA, Indirect Tensile Strength Ratio Tests.

•Sampling and Testing for Concrete, Asphalt, Soil, Pipe Line, etc.

•Reviewing and verifying the Material Test reports for Concrete, Soil, Asphalt and other Materials

•Maintain the Records for All testing’s, Calibrations Certificates for further Use.

•Maintain the Laboratory Equipment’s and follow up for maintenance and Calibrations.

•Fresh concrete testing’s (i.e. Slump, Temperature, Bleeding, Air Content etc.)

•Hardened concrete Testing’s like Compressive strength, Flexural Strength, and Durability tests, RCP, CM, WP, IAST, WA.

•Bitumen & Asphalt Testing, DSR, BBR, DTT, RCAT, MSCRT, Wheel track Test, Penetration testing on bitumen, Softening Point, Bulk Density Air voids

•Concrete testing. Compressive strength testing, water permeability and absorption testing initial surface absorption testing, shimmidt hammer testing

RESPONSIBILITIES

·Controlling the quality of Asphalt, Aggregates, and Soil section with help of necessary Quality tests.

·Ensure Quality Control of Concrete and Asphalt

·Checking Aggregate with Sieve Analysis, Sp. Gravity & Absorption Soundness with Na2So4 or MgSo4, Abrasion, Thin & Elongated, Clay Lumps & Friable particles, Asphalt Coating & Stripping Tests.

·Checking asphalt quality test, Extraction, Sieve Analysis, Gmm, Gmb & Volumetric properties SGCE of HMA, Indirect Tensile Strength Ratio Tests.

·Sampling and Testing for Concrete, Asphalt, Soil, Pipe Line, etc.

·Reviewing and verifying the Material Test reports for Concrete, Soil, Asphalt and other Materials

·Maintain the Records for All testing’s, Calibrations Certificates for further Use.

·Maintain the Laboratory Equipment’s and follow up for maintenance and Calibrations.

·Fresh concrete testing’s (i.e Slump, Temperature, Bleeding, Air Content etc.)

·Hardened concrete Testing’s like Compressive strength, Flexural Strength, and Durability tests, RCP, CM, WP, IAST, WA.

·Bitumen & Asphalt Testing, DSR, BBR, DTT, RCAT, MSCRT, Wheel track Test, Penetration testing on bitumen, Softening Point, Bulk Density Air voids

·Concrete testing. Compressive strength testing, water permeability and absorption testing initial surface absorption testing, shimidt hammer testing

NATIONAL ENGINEERING SERVICES PAKISTAN CONSULTANT (NESPAK)

Duration: April 2009 to May 2012

Position: Material Inspector / Lab Technician

Project: METRO TRANSIT SYSTEM LAHORE

Client: LDA (LAHORE DEVELOPMENT AUTHORITY)

RESPONSIBILITIES:

•Controlling Soil quality with Atterberg’s Limit, Sieve Analysis, Proctor, CBR, Relative Density, & Field Density Tests.

•Checking Aggregate with Sieve Analysis, Sp. Gravity & Absorption Soundness with Na2So4 or MgSo4, Abrasion, Thin & Elongated, Clay Lumps & Friable particles, Asphalt Coating & Stripping Tests.

•Checking asphalt quality test, Extraction, Sieve Analysis, Gmm, Gmb & Volumetric properties, SGCE of HMA, Indirect Tensile Strength Ratio Tests.

REFERENCE:

AVALIBLE UPON REQUEST

Contact this candidate