Electrical Engineer
Resume:
OKORO CHIMAOBI UZOMA
With ** years and a half of progressive and vast experience in building project constructions in the field of fire alarm, oil & gas turnarounds & instrumentation works, telecommunication solutions and electrical engineering discipline works as well. Involved and been engaged on services in the form of consultations, investigations, designing, preparation of plans, specifications, estimates, erection, installation and supervision of electrical works, instrumentation and telecommunication works as well as fire detection and alarm systems including the inspection and acceptance of materials utilized in each line of working disciplines. Carrying-out duties related to preparation and issue of engineering deliverables for project implementation as Project Engineer/Site Supervisor. Experienced Onshore and Offshore (Sanjay Bardge,OKONO Oil Field,BONGA Oil Field,SHELL Energy Platform 1 & 2) related works.
Aside from doing documentation works, I have been engaged in doing actual installation jobs on Project Sites such as building of marshalling cabinets wirings (electrical, instrumentation & control, FDAS etc.), installation of circuit breakers, circuit protection overload relays, contactors, demolition works of electrical control wirings & reconnection, installation & commissioning of PLC (racks, chassis, I/O analog/digital component hardware’s, DeviceNet, ControlNet, Ethernet/IP, non- redundant/redundant configuration), wiring modification installation works, interpret and evaluate layouts/drawings handed-over by Consultants for electrical and control wirings. Can handle ELV and EHV electrical installation works.
Facilitating electromechanical maintenance works and turnarounds within agricultural farms such as HVAC’s, Chillers, Condensers, FCU’s, Heaters, Water Irrigation and Variety of Mechanical Pumps, Variety of Motors, Electrical Facility Installation works etc.
First Name Chimaobi uzoma
Last Name Okoro
Phone No +974-********
Email *****.*.*****@*****.***
Education Federal Polytechnic degree(HND)
Field of Study Electrical/Electronics Engineering
College or University Federal Polytechnic Nekede-owerri
Time Period 5 Years
Job Title Electrical Engineer
Work Experience 10+ years
GCC Experience 4 years
Visa status Qatar work visa transferable(NOC)
Company: Global Energy for Electrical works (GEW)
Energy Team Department
Building No 26 office 202 Al Muntaza intersection of lbn Sayyar Street,Doha-Qatar
March 12,2016---May,31,2019
Designation: Electrical DesignEngineer (MEP)
Responsibilities and Duties:
• Preparing EPIC documents for bidding purposes.
• Preparation of documents for work schedules, man-hour estimates, equipment specifications, method of statements, cost estimates, quotations & bill of quantities for tendering and proposals.
• Assist in the preparation of the Technical Document Register (TDR), identify requirements and scope of work; review specifications and Data Sheets, Piping & Instrumentation Diagrams (P&ID’s), Plot plans, General Arrangement (GA) drawings, Review Philosophies, Area Classification Drawings and other relevant documents
• Prepare the design basis, single line-diagrams, equipment and cable sizing calculations and other material and equipment analysis for client approval. Prepare Carry Out short circuit load flow, voltage dips and transient stability studies. Perform design calculations for earthing, lightning protection, lighting, relay settings etc.
• Assist in the organization and guidance of designers in the preparation of equipment and material specifications and data sheets, administer the development of detailed engineering calculations and drawings including the preparation of load list/schedules Single Line Diagrams, Schematic Diagrams, Logic Diagrams, Cable Schedules and Cable Drum Schedules, Interconnection Schedules, Hazardous Area Classification, Equipment Lay-outs, Cable Routing and Lay-out Drawings, Cable Trench/Tray Lay-out Drawings, Lighting System Lay-out and Details, Earthing/Lighting System Lay-out and Details, Heat Tracing Lay-out and Details, Installation Standard Drawings, Relay Coordination Drawings and other required documents.
• Prepare technical inquiry requests (Inquiry Requisitions) to vendors; participate in the technical evaluation of vendor bid offers. Perform Technical Bid Evaluations (TBE), review vendor drawings and documents. Ensure vendor equipment specifications meet with client equipment specifications and are within budgeted costs.
• Assist in the review of plot plans; organize the issuance of engineering drawings and technical documents for Inter-Discipline Checks (IDC’s) coordinate with other engineering discipline in the integration of technical data inputs.
• Prepare Purchase Requisitions for the procurement of equipment and materials. Ensure materials are obtained within scheduled time frames and budgeted costs.
• Perform related duties as and when directed by Direct Supervisor
• Coordination to Engineers at site and Client’s Inspectors/Engineers in resolving non-conformance issues/reports.
• Knowledge in LT switchgear, lighting and socket outlet, transformer, HT system, low voltage system, power distribution and LV main Feeder.
• Review & assessment of construction & pre-commissioning report and issuance of construction completion certificate prior to commissioning activities.
• Responsible for engineering activities, electrical, instrumentation, fire alarm and detection systems, fire and gas systems.
• Supervision for Maintenance activities of Instrumentation field devices as well as control systems. Also, Fire Detection & Alarm, Fire & Gas Detection systems.
• Electrical Engineering related task, which includes Data Sheets, Specifications, and construction drawing inspection.
• Familiar with International Codes and Standards such as ANSI, ISO, ISA, NEC, IEC
• Excellent Computer skills in MS Office packages which includes Excel, Word, Power Point, MS Office Project, etc
Company: Beach marine Equipment parts Ltd
P.o box 8095,umm Al Quain UAE,September,19th 2014—Dec31,2015
Designation: Engineer/Field Engineer
Responsibilities and Duties:
• Assigned to check Service Identification Number and Transformer Location Number proper connectivity of electric meters to transformers.
• Conducting Elevated Meter Center (EMC) field survey on (BM) posts if the meter number of a customer are connected to its proper or right transformers.
• Performing surveys on idle transformers to update activation status on (BM) Operating Trouble Maintenance System (OTMS).
• Getting transformer voltages and amperes intensity for future useful purposes.
• Executing electrical study reports & electrical calculations based on the field survey of distribution power system for voltage and current transformers.
• Gathering datasheets & specification reviews for data loggers brought by sub-contractor after field survey.
• Implementation, investigation and consultation of electrical system design for community distribution purposes based upon electrical calculation of transformers.
Company: Ocean marine Solutions Ltd
31A Evo Road GRA,Phase 2,Port-harcourt
Duration: jan 17th,2011—August 5th,2015
Designation: Offshore Electrical /Engineer
Responsibilities and duties:
Rendering of design and specification of all MV/LV electrical equipment including SCR(Silicon controlled Rectifier) based electrical equipments,AIS,MV/LV,switch gears,circuit breakers,distribution and transmission cable,motors and diesel generators.
Rendering of standard installation practices,testing,trouble shooting of power transformers,protection systems,Numerical relay, switch protection,distribution panels,motor control stations,AC/DC UPS,VFD,soft Starters,APFC and battery chargers power supplies.
Switching Operations of equipments under MV/LV Substation and electrical rooms such as transformer switch geras(33KV,11KV)
Working on Polysilicon reactors and its thyristors panel functioning.
Testing of GIS EHV 220KV/132KV,and PDA testing.
Analyze Equipments threats and Hazards and ensure implementation of standard operating procedures inorder to maintain the equipment and assure adherence to safety standards.
Assist the maintenance planner in preparing scope of work,including specifications,drawings and other electronic parts of tender documents projects related to electrical equipments.
Cosults other departments concerned to verifying aspects and construction of electrical equipment or electrical parts for the review,Analyze electrical drawings such as SLD,Logic Schemes,ATS Scheme to trouble shoot Fault analysis.
Company: Automaster services Ltd
#3 East west road Rumukurusi,Port-harcourt
Duration: Nov 24th, 2008 – Dec 31st, 2010
Designation:Design and Application Engineer
Responsibilities and Duties:
• Receives allocated duties and studies Scope of Work to understand what is required. Interfaces with other disciplines to ensure integration of activities.
• Prepares specifications, datasheets and undertakes calculations to meet requirements allocated tasks.
• Coordinates with the drafting office coordinator for the checking and issuing of drawings.
• Prepares PR, including the Bill of Materials; specifications, datasheets/drawings; inspection test requirements; and vendor data requirements for review by Senior Engineer.
• Undertakes technical evaluations of vendor offers for less complex items to ensure PR’s technical details are satisfied.
• Undertakes pre-engineering site surveys in order to provide input information to facilitate detailed engineering.
• Reports on work progress, bringing to notice potential problems or delays and recommends solutions.
• Prepares man-hour estimates for engineering deliverables at the estimation stage, for consideration in the development of the final bid.
• Supervises the preparation of material take-offs for engineering procurement and construction (EPIC) projects.
• Electrical Work/Cooling Tower/Lightning Protection Installation.
• Industrial wiring/Installation of Fire Suppression System.
• Burglar Alarm System, Traffic Management System, CCTV Surveillance Cameras and Fire Detection and Alarm System Installation.
• Facilitate, review, check and designing electrical power system for electrical discipline project
• Working & preparing documents for electrical study reports, electrical calculations, bill of quantities, cost estimates, work schedules, man-hour estimates, pricing and purchasing of electrical materials and deliverables..
Company: National Electric power Authority (NEPA)
#1 Royce Road,owerri
Duration: March 24th, 2003 – March 15th, 2004
Designation:Field Technician
Responsibilities and Duties:
• Assigned to check the real capacity, quality and internal conditions of all kinds of newly released electrical appliances about ISO standards.
• Basic tests are as follows: vibration test, short circuit t• Facilitating electromechanical maintenance works and turnarounds within agricultural farms such as HVAC’s, Chillers, Condensers, FCU’s, Heaters, Water Irrigation and Variety of Mechanical Pumps, Electrical Facility Installation works etc.
• Handling bulk facility jobs on construction firms (buildings, high-rise buildings) and some factories & warehouses if they need any requirements for facility maintenance as well.
• Creating and developing a complete facility system scheme and managing office & on-site installation team that will complete the process of the entire project.
• Can work under work pressure without any delays on the schedule handed-over by my Superior.
• Flexible to work in one place to another in order to gain objectives that are more progressive at the end of the day.
• Creating reports everyday about the achievements and accomplishments of works on each assigned projects or disciplines.
• Creating effective planned preventive maintenance program for all facilities, which includes electro-mechanical installations, buildings and all other physical assets and equipment of the company.
Professional certifications:
Electrical design,Primevera p6,NEBOSH IGC,123,Advanced Systems Automation -150hrs,IOSH,RISK assessment,T-BOSIET,H2S(OPITO) (in View)
ADDITIONAL SKILLS
Knowledge of SAP,Plant information Management Sysstems,Plant resource management systems.
Good Knowledge of QA/QC.
Knowledge of electrical drawings,Schemes and procedures related to MV/LV switch gears.
Working on DCS/PLC control system programming.
Using analog and digital control system architecture to trouble shoot and repair faulty electrical equipments.
Knowledge in process instrumentation,trouble shooting,calibration and repair.
Knowledge of SCR control based power control systems experience with high frequency power systems.
Good interpersonal and organizational skills
Advanced level of Compuert Literacy and good in Microsoft Office.
Excellent Communication Skills and presentation in both written and Verbal English,fair in Arabaic speaking.
Personal Interest
Reading,Travelling,Playing football and swimming
Contact this candidate