QA/QC Mechanical Inspector, Mechanical Technician, Combination Welder
Resume:
PERSONAL DATA
Name : JOVITO D. SARSABA JR.
Address : Purok Ipil Stn. 1 Inicbulan Bauan, Batangas
Date of Birth : September 08, 1973
Place of Birth : Jasaan, Misamis Oriental
Civil Status : Married
Sex : Male
Citizenship : Filipino
Height : 5’ 6”, 167cm
Weight : 176 lbs.
Religion : Christianity (Roman Catholic)
TIN No. : 480 745 068
Passport No. : P5249133B
Expiry Date : July 14, 2029
EDUCATIONAL ATTAINMENT
June 1990 - July 1993 : Pablo Borbon Memorial Institute of
Technology
Renewed B.S.U, Batangas State
University
Mechanical Engineering Technology
D.T.S. Graduate
July 06, 1992 - May 05, 1993 : ChemPhil-LMG Inc.
San Pascual, Batangas
On the Job Trainee including school
Sessions, Friday and Saturday
May 14, 1992 – June 16, 1992 : PNOC Dockyard and Eng’g. Corp.
San Miguel Bauan, Batangas
On the Job Training
June 1986 – March 1990 : Bauan High School
Bauan, Batangas
Finished High School Education
June 1980 – March 1986 : Sogod Central School
Sogod, Southern Leyte
Finished Elementary Education
CURRICULUM VITAE
JOVITO D. SARSABA JR.
Purok Ipil Stn. 1 Inicbulan
Bauan, Batangas
Contact Nos.: +63-927-***-**** / 091*-***-****
E-mail: ac923l@r.postjobfree.com
POSITION APPLIED FOR: QA/QC INSPECTOR, MECHANICAL
MAINTENANCE RELATED POSITION
SPECIALIZATIONS : Responsible for the approval of all works carried
out by the Contractor and inspected based on the approved Inspection and Test Plan design
and drawings.
Ensure that all the QA/QC activities comply with the requirements of the Quality Procedures and client specified requirements.
Prepare for approval prior to implementation of the Quality Control Work Procedures and Inspections and Test Plans.
Attend and execute all Requests for Inspection forms and provide comments and necessary signed of according to client’s approval.
Perform surveillance and inspection of ongoing construction project.
Ensure effective implementation of non-conformance, corrective actions and preventive actions.
Responsible for the inspection of Mechanical equipments such as: pumps, compressors, exchangers, evaporators and boilers.
Conduct material Inspection according to
Specifications and approved materials by the client’s party institution for testing and calibrations.
Knowledge and application of engineering standards such as: ASME B31.1, ASME B31.3, AWS, ASTM, API, ANSI, AWWA, ISO 9001 and ISO 14001.
Participate in the monthly Audit for the application and implementation of ISO 9001 and ISO 14001.
Geographical Areas of Work: PHILIPPINES, JAPAN, U.A.E, LIBYA, RUSSIA, K.S.A
and MALAYSIA
Technical Areas of Work : Gas Plant, LNG Plant, Petrochemical
Refineries, Power Plant, Cement Plant,
Desalination Plant, Chemical Plant, Dockyards Ship Building, Fabrication Shop and Yard area and Structural Buildings
RESUME OF KEY PERSONNEL
Name: JOVITO D. SARSABA JR. Position Applied for: QA/QC INSPECTOR Age: 45
Discipline: MECHANICAL ENGINEERING TECHNOLOGY Nationality: FILIPINO
English Speaking Capability: VERY GOOD
Education
School/University Dates in Attendance Degree/Certification
BATANGAS STATE UNIVERSITY 1990 to 1993 Diploma in Mechanical
Batangas, PHILIPPINES Engineering Technology
IN-HOUSE TRAINING AND SEMINARS ATTENDED
Piping and Welding (QA/QC Training and Seminar)
In-Plant (QA/QC Mechanical Maintenance Training) CHEMPHIL-LMG, INC.
QA/QC (Mechanical Training) PNOC Dockyard and Engineering Corp.
Principles of Hydraulics and Pneumatics, QC inspection Training and Seminar
Technical Skills:
Computer (MS Word Processing, Internet, e-mails, Spreadsheets, Databases, Excel, Outlook, Power Points and Software)
Summary of Experience
Having 19 year’s diversified experience in the field of construction for Quality Assurance and Quality Control activities Such as Heavy Industry Dockyards, Petrochemical, LNG Plants, Oil and Gas & Construction in Kingdom of Saudi Arabia and in other countries.
SPECIFIC JOB EXPERIENCE:
Position : QA Inspector, Mechanical
Duration : May 25, 2018 to June 30, 2019
Employer : AECOM PHILS. Inc.
Type of Project : Mechanical, Cement Pant
Project Name : Republic Cement Building and materials plant
Scope of Work:
Performed and approved the inspected items accomplished by the Contractor either mechanical equipment, fan motors, pumps & compressors, air ducting, piping and structural steel structures.
Review the Contractor’s submitted documents, ITP’s, Method Statements and provide comments for approval and implementation of final work activities required by the plant owner.
Responsible for the approval of rendered RFI both hard and soft copy and put approved comments as specified by the client/plant owner.
Raise non-conformance report for every work activities which is not complied with the specific requirements and failed to follow as per specified Quality Standards.
Detailed Job Description:
Responsible for the approval of all the inspection accomplished by the contractor either Mechanical or Industrial inspection.
Checked and approved all the contractors documents Request for Inspection both hard and soft copy documentation.
Witnessed the contractor’s Non-Destructive test such as, VISUAL test, UT, MPT & LPT together with the third party inspection and provide comments for the approval.
Conduct and witnessed the contractor’s final test for oil hydrostatic test, water hydro test, Air-leak test and pressure leak test for plant air line, water line and mechanical equipment oil lubrication line which is used by the plant main equipment area.
Position : QA/QC Mechanical Engineer
Duration : December 2014 to August 03, 2017
Employer : Petroleum Chemicals and Mining Company Limited
Type of Project : Mechanical / Piping, FRP Piping
Project Name : SEA WATER COOLING SUPPLY AND RETURN WORKS PHASE -1
Scope of Work:
Performed inspection of materials as per MTC which meets the quality standards and material specifications procedure. Inspection of detailed FRP piping works either lamination job or FRP pipe coupling joint procedure specifications. Make sure that the piping and accessories meet the quality standards and approved specifications. Illustrates and interprets mechanical and FRP piping drawing necessary needed as requirements in the SEA WATER COOLING SUPPLY AND RETURN WORKS PHASE 1 project and other related jobs in mechanical QA/QC.
Detailed Job Description:
Attend and execute all requests for inspection forms and provide comments and necessary signed of according to client’s approval.
Monitor all activities of mechanical construction division if the works are done well in procedure and in approved mechanical works specifications with accordance to quality and accuracy of work.
Monitor all materials receiving, check and inspection.
Prepare inspection reports, daily reports and other relevant documents.
Monitor all on going and incoming FRP fit-up and installation works in lay down or at work site area.
Responsible for obtaining client’s approval of all FRP piping and mechanical works and doing the inspection as per approved ITP’s and design drawings.
Provides technical strategies and good ideas on some FRP piping and mechanical works for the lease of job repetitions and avoid necessary failures and lessens rejection.
Proper coordination with the client in performing joint test, hardness test and some necessary testing needed in FRP piping and mechanical works as per approved ITP and specifications.
Position : QA/QC Welding Inspector
Duration : February 3, 2014 to October 27, 2014
Employer : Petroleum Chemicals and Mining Company Limited
Type of Project : Mechanical/Piping
Project Name : SADARA (DAELIM Unit 103 MFC Project)
Scope of Work:
Coordination for welding and piping. Illustrates weld mapping of designated welding joints. Check and inspection of welding joints necessary for approval of the main contractor to undergone NDT test and inspection. Summarized daily welding reports and welding inspections requirements for NDT test and inspections. Update both daily welding and NDT status reports needed in the project.
Detailed Job Description:
Ensure that all the QA/QC activities comply with the requirements of the Quality procedures and client’s specified requirements.
Attend to all RFI (Request for Inspection) forms from Contractors and provide comments as necessary and signed off accordingly.
Monitor all activities to see if all works are done according to method and specification with particular attention to the construction program target schedule.
Coordinating with clients’ inspector as per the schedule time of inspection and RFI processing.
Preparing inspection and NDT reports and other relevant documents.
Attending the NDT test according to approved ITP and verifies the inspection reports and validating the results.
Monitoring of all the on-going welding works assigned to ensure that quality of work meets the required welding procedure and applicable standard.
Responsible for obtaining client approval of all works carried out and inspected based on the approved Inspection and Test Plan, design and drawings.
Liaise and communicate with Contractors QC Inspectors and Engineers relating to changes/revisions on drawings and ensure that these are implemented on site.
Provide technical and statutory advices on some of the piping/welding works.
Monitoring of all the on-going activities of piping fit-ups and updated welding report to ensure that quality of work meets the required procedure.
Conduct material inspection according to specification and approved materials by the client.
Position/Title : QC Inspector
Duration : Dec 2013 to January 2014
Employer : Petroleum Chemicals and Mining Company Limited
Type of Project : Mechanical/Piping
Project Name : SASREF Mechanical SHUTDOWN
Scope of Work / Specific Duties and Responsibilities:
Illustrate mechanical and piping drawings. Check and inspection of piping joints welding joints as well as their materials as per WPS. Updates piping and welding reports required to undergone RT and other NDE TEST. Monitor PWHT for alloy pipes as per WPS. Performing NDE test and inspection needed as client’s requirements. Check and inspection of piping parameters, straightness as per tolerance. Visual inspections of piping weld joints before undergone NDT test and inspection.
Position : QA/QC Piping, Welding
Duration : July 2012 to April 2013
Employer : IWI Global SDN BHD, Kimanis Papar Sabah,
Malaysia
Type of Project : Oil and Gas (Mechanical and Piping)
Project Name : Sabah Oil and Gas Terminal (SOGT Project)
Detailed Job Description:
Preparation of RFI requirements for piping and welding inspection.
Check and review approved WPS specifications and other requirements for welding and piping inspection.
Read and illustrate piping isometric drawings. Read and interpret welding rejections for repair procedure.
Prepare and check ITP for receiving and releasing of piping materials and fittings.
Creates and develop an advance ideas and strategies for weld rejections procedure applied for piping fabrication and on-site installations and erections.
Monitoring of daily welding production status report.
Monitoring of daily welders checklist and their area and scope of work.
Updates welder and their respective WPS parameters and welders designated qualification.
Monitors and check the PWHT as per WPS.
Updates weld plan, isometric drawings as per latest revision to meet the
Client’s standards and procedure requirements.
Updates daily Fit-ups to endorse for the preparation of RFI to be approved for full welding.
Updates daily weld status reports in preparation for the NDE test and inspection.
Preparation of daily NDT reports and updating their status.
Updating the welders WPS results and their validation.
Attend welders Qualification on actual welder’s visual test for the approval of WPQT.
Position/Title : QC Inspector
Duration : September 2010 to January 2012
Employer : Samsung Engineering and Construction Co. LTD.
Type of Project : Mechanical/Piping
Project Name : Samsung Saudi Arabia LTD. (GAS Jubail Phase VIII Project)
Detailed Job Description:
Prepare Inspection Test Plan (ITP) before start the project & checklist for approval of the client’s requirements.
Interpret isometric drawings in accordance to project specification and standards.
Coordinate with the foreman and supervisors for any job resolutions and QA/QC improvements.
Monitoring the site implementation such the no weld rejection target or Zero defect.
Inspection of piping materials and fittings as per approved isometric WPS.
Control and maintain QA/QC specifications, procedures and requirements.
Responsible for updating the isometric drawing to as built condition as the work is in progress.
Assuring that the environment health and safety procedures are being followed.
Inspection of materials according to specifications and approved MTC.
Witness the preparation and execution of Hydrostatic test, Nitrogen filled Pneumatic test and Air Leak test as per client’s procedure and requirements.
Position/Title : QC Inspector
Duration : February 2009 to August 2010
Employer : Samsung Engineering and Construction Co. LTD.
Type of Project : Mechanical/Piping
Project Name : Samsung (MA’ADEN Ammonia project)
Scope of Work / Specific Duties and Responsibilities:
Control and maintain QA/QC related documents.
Review plan drawings in accordance with the specification and standards.
Conduct inspection on the various works of piping, welding and mechanical works.
Preparation of inspection reports & other relevant documentation.
Perform other duties that may be assigned from time to time.
Confirmation to Corrective Action Reports (Site Checking).
Coordinate to the client’s QA/QC representative and inspector for any job
resolution.
Conduct material inspection of the items and review Material Test Certificate
(MTC) specified requirements of the project.
Review welder’s WQT. Witness hydro testing, pneumatic testing, air-leak test
and steam blowing test as per client’s procedure.
Position/Title : QC Inspector
Duration : September 2007 to January 2009
Employer : Samsung Engineering and Construction CO. LTD.
Type of Project : Mechanical/Piping
Project Name : Samsung Saudi Arabia LTD. Sharq 3rd Expansion Project
(Ethylene Glycol Plant)
Scope of Work / Specific Duties and Responsibilities:
Preparation and check Material Test Certificate (MTC) and the approved Inspection Test Plan (ITP).
Review the approved WPS piping and welding parameters. Illustrate the isometric drawings as per projects design and revisions.
Responsible for handling the isometric drawings latest revisions.
Doing the onsite piping and production weld inspection.
Monitoring the welder’s site implementation and preparing progress report.
Doing visual inspection of welders production weld as per RFI.
Monitor and inspection of ongoing activities on site.
Monitors NDE daily status reports and respective repairs and weld rejections.
Updates welder’s skills capabilities on work progress and attend welder’s WQT.
Witness hydrostatic test, Pneumatic test and Air leak test as per WPS and client’s procedure.
Position/Title : QC Inspector
Duration : November 2006 to September 2007
Employer : Samsung Engineering and Construction CO. LTD.
Type of Project : Mechanical/Piping
Project Name : Samsung Saudi Arabia LTD. (APPC PDH/PP) project
Scope of Work / Specific Duties and Responsibilities:
Preview the approved WPS for projects design and Engineering requirements.
Review the approved WPS piping and welding specifications. Illustrate the isometric drawings for proper guidance and execution for fabrication.
Responsible for handling the isometric drawing and inspection of detailed fit-up activities.
Doing the daily onsite status report inspection.
Monitoring the welder’s site work activities and preparing progress report.
Doing weekly status reports activities.
Monitor monthly inspection status reports on site.
Monitors NDE status reports of welder’s individual onsite production performances.
Inspection of welder’s checklists of equipments, tools and updated calibration certificates.
Witness the Hydro testing of the main process piping as per WPS and client’s specified procedure.
Position/Title : QC Inspector
Duration : March 2006 to October 2006
Employer : Daewoo Engineering and Construction Co. LTD., Sakhalin
Island, Russian Federation
Type of Project : Mechanical/Piping
Project Name : Sakhalin II LNG, OET Project
Scope of Work / Specific Duties and Responsibilities:
Preparation and check Material Test Certificate (MTC) and the approved Inspection Test Plan (ITP).
Review the approved WPS piping and welding parameters. Illustrate the isometric drawings as per projects design and revisions.
Responsible for handling the isometric drawings latest revisions.
Doing the onsite piping and production weld inspection.
Monitoring the welder’s checklist and preparing progress report.
Doing visual inspection of welders production weld as per RFI.
Monitor and inspection of on-going activities on site.
Monitors NDE daily status reports and respective repairs and weld rejections.
Updates welder’s skills capabilities on work progress and attend welder’s WQT.
Monitors PWHT, MPI, PMI, RT, PT HARDNESS test as per client’s requirements
procedure and specification.
Position/Title : QC Inspector
Duration : September 2004 to October 2005
Employer : Hyundai Engineering and Construction Co. LTD.
Mellitah, Libya
Type of Project : Mechanical/Piping
Project Name : NC41 Onshore Project, Mellitah Plant, Libya
Scope of Work / Specific Duties and Responsibilities:
Review and check welder’s qualifications and designated WPQT.
Review and check approved drawings to be used for fabrication and construction.
Check material delivery status and its proper storage specified requirements.
Inspection of equipment and tool calibration before the start of work.
Surveillance inspection of Construction daily activities onsite and in fabrication area.
Doing daily inspection activities report as per RFI.
Monitor and inspection of on-going repairs and modification activities on site.
Monitors NDE daily status report and weld repair.
Updates welder’s skills and abilities on work progress and welding techniques.
Position/Title : QC Inspector
Duration : October 2002 to May 2004
Employer : National Petroleum Construction Company
(NPCC) Abu Dhabi, UAE
Type of Project : Mechanical
Project Name : NPCC FABRICATION Yard Area
Scope of Work / Specific Duties and Responsibilities:
Preparation of Material Test Certificate (MTC).
Preview and interpret pressure vessels isometric drawings.
Responsible for handling the pressure vessel’s drawings latest revisions.
Doing the onsite pressure vessel inspection which includes vessel attachments vessel heads layout and inspection vessel hole layout inspection.
Check the proper procedure upon the fit-up and handover to full welding.
Check and monitor NDT Test and Inspection of the pressure vessel.
Attend actual onsite NDT Test and inspection.
Inspection and carefully check the vessels welding parameters and specification as per client’s procedure.
Position/Title : Combination TIG Welder
Duration : January 1997 to December 1999
Employer : KHI / KSS Kawaju Sakaide Services (branch
company of Kawasaki Heavy Industries)
Type of Project : Mechanical/Dockyard and Ship Hull Fabrication
Project Name : Kawasaki Heavy Industries Dockyard and Engineering Division
Scope of Work / Specific Duties and Responsibilities:
Provides excellent production inputs of piping weld production status, and create ideas on how to do the designated jobs perfectly with Quality and assurance.
Preview and understand the Welders Qualification Test (WQT).
Develop proper handling of materials and fittings as of their designated procedure.
Full-welding of small Bore and Large Bore pipes and fittings (butt-weld or saddle joints) of different classification of materials and their WPS.
Attend and participate the welder’s actual Qualification Test in different process and scope of Qualifications such as: GTAW/FCAW, GTAW/SMAW and SAW. On different techniques Manual, Semi-Automatic and Automatic Robotic welding.
Familiar in various types of welding machines and welding equipments either AC or DC generators.
Responsible for the weld repair and inspection of weldments and its exact welding techniques and execution.
Proper segregation of materials and inspected weld production joints as per WPS.
Contact this candidate