QA/QC Engineer
Resume:
Name: Mr. Raymond L. Eta
Preferred Positions: QA/QC Engineer / Piping/Welding Inspector / Mechanical Engineer Discipline: Mechanical / Piping / Welding / Painting E-mail address: *************@*****.***.**
Skype ID: raymond_limbo
Phone Number: +965-****-****
Permanent Address: Mahaplag Leyte, Philippines
Present Address: Fahaheel, Kuwait
CAREER OBJECTIVE
To be a part of an organization where I can fully utilize my profession and skills and make a significant contribution to the success of the employer and at the same time my individual growth. WORK HIGHLIGHTS
Over eight (8) years of proven experience in Quality Control / Assurance activity and in-depth knowledge on all aspects of Mechanical Works such as; Piping and Welding Inspections in Oil and Gas and Petrochemical Plant Construction works both fabrication and field activities. Inspection inclusive in above ground & underground piping works, involved in QA/QC Welding, Piping and Mechanical Inspection, and Supervision activities in fabrication, field installation and inspection, punch listing and hydro testing of newly installed piping, reviewing and signing-off hydro-static testing package and structural welding for its auxiliary equipment for Oil and Gas Refinery and other Saudi ARAMCO major projects and facilities.
Moreover, possesses extensive experiences working with EPC companies like Wood, Foster Wheeler, Worley Parsons, Exxon Mobil and Saudi Owned Company like Saudi Basic Industries Corporation (SABIC), MARAFIQ, SAMREF, Saudi ARAMCO and Saudi Electricity Company (SEC). PRIMARY QUALIFICATION AND TRAINING CERTIFICATES
SAUDI ARAMCO–Approved Piping/Welding Inspector
CSWIP 3.1 Welding Inspector Level II Certificate No. 85597/2–United Kingdom
Licensed Mechanical Engineer Certificate No. 0075329–Philippines
Philippine Society of Mechanical Engineers–Philippines
American Society for Nondestructive Testing (ASNT/NDT– RT, UT, MT, PT)–Al Rushaid Construction Co. Ltd.
ISO 9001;2008 Quality Management System–Al Rushaid Construction Co. Ltd
Completed Material Receiving, Mechanical (Static & Rotating), Welding, Piping Inspection Course–Al Rushaid Construction Co. Ltd
Hot Tapping and Tie-in Works–Saudi Aramco Mobil Refinery
OSHA - General Industry Safety & Health Certificate No. 107152-133–Kingdom of Saudi Arabia
OSHA - Fire Safety Training & Drill Certificate No. 107***-***-***–Kingdom of Saudi Arabia
OSHA - Electrical Safety at the Workplace Certificate No. 107***-***-***–Kingdom of Saudi Arabia SKILLS
Has in-depth knowledge on the following system software, codes and standards: Windows Microsoft Office (Word, Excel, Power Point) and Auto Cad ASME IX, ASME II Part A/B/C, ASME V, ASME VIII
ASME B31.1, ASME B31.3, AWS D1.1, API Standards, ISO 9000:2005, ISO 9001:2008 SAUDI ARAMCO Standards, SHELL DEP’s, EXXON MOBIL Global Practices and General Safety 2 P a g e
Has a Saudi Driving License:
Driving License Number: 040***********
EMPLOYMENT HISTORY
A.) Project: “KNPC Clean Fuel Project” – Kuwait National Petroleum Company Client: Wood Plc
Location: MAA Refinery, Kuwait
Company: SK Engineering & Construction Co. Ltd
Position: QA/QC Piping/Welding Inspector
Date: August 12, 2018 – Present
Address: SK E&C, 32 Insadong 7-gil, Jongno-gu, Seoul, Korea Tel.: 82-2-3700-7114 Fax: 82-2-3700-8200
Duties and Responsibilities that performed:
Document Review (ITP, Checklists, Method statements, Procedures, WPSs and PQRs) and approval as per applicable standards.
PQR Witness as per PWPS and monitoring the variables.
Review WPS as per Latest ASME Sec. IX, and B31.3.
Witnessing WPQT and review the continuity record of welders.
Coordinate with subcontractors and verifying the day to day activities.
Review the welder JCC and approve the same.
Filler wire and electrode receiving Inspection
Incoming material inspection in accordance with applicable standards and Purchase order for the additional requirements.
Material receiving Inspection
Electrode backing record verification.
Fit-up Inspection as per WPS.
Visual Inspection for the completed weld joints in process piping as per ASME B-31.3 and project specifications.
Structural steel fabrication inspection as per AWS D1.1
NDT Selection and verification for reports.
Witnessing Dye Penetrant Inspection.
Monitoring and Verifying the PWHT Chart and approve the same.
Attend progress review meeting with subcontractor and client.
Evaluation and approval of subcontractor QA/QC personnel.
NDT Selection and verification for reports maintained the all NDE reports &Review of final QC documents etc.
Reviewing the hydro test packages.
B.) Project: Piping Fabrication
Company: Welders Testing Laboratories Philippine Incorporated Position: QA/QC Piping/Welding Inspector
Date: January 29, 2018 – July 27, 2018
Address: 24th Floor Trident Tower, 312 Sen. Gil Puyat Ave., Brgy. Bel-Air, Makati City Tel.: (02) 844-6967 / 843-8219 Fax: (02) 815-8738
Duties and Responsibilities that performed:
Assigned in piping fabrication shop.
Coordinate with fabrication shop personnel (welder/fabricator) regarding the activities to be performed.
Coordinate with Site personnel regarding the fabricated materials status.
Liaise with site personnel for the delivery of the materials on site.
Performing Pipe fit up Inspection.
Visual Inspection for the completed weld joints in process piping as per ASME B-31.3 and project specifications.
3 P a g e
Performing welder’s qualification as per the approved WPS.
Witness Hydro and Pneumatic Testing with client representative.
Check and validate calibration certificates of welding equipment's, welding machines, quivers and consumable certificates.
Identify and Ensure safe working condition and report any potential Hazard. C.) Project: “SEC General Maintenance Project”
Client: Saudi Electricity Company, Power Plant 1 & 2 Location: Rabigh, Kingdom of Saudi Arabia
Company: Excel Engineering & Contracting Company
Position: QA/QC Engineer / Mechanical Engineer
Date: October 31, 2015 – January 8, 2018
Address: 3rd Floor – Hawa Bldg. King Abdulaziz St.– Dammam, Kingdom of Saudi Arabia Tel.: +966-*-***-**** Ext. 125, Fax: +966-*-***-**** Duties and Responsibilities that performed:
Implementing and maintaining an overall Quality Management System for the Project.
Contributing to the comprehensive integration and support of all quality activities during all phases of the project.
Participating in the development and review of project-specific quality requirements of all contractor bid packages, requisitions, purchase orders and inspection activities.
Monitoring, assessing and reporting on the Project Quality Management Systems of all project members including Owners, Licensors, Project Management Contractors (PMC's) and EPCs to ensure adequacy and effectiveness.
Recording, reporting and tracking all issues identified as a result of all monitoring activities including inspections, testing and assessments performed both internally and external to ensure appropriate resolution.
Reviewing Contractor quality plan(s) and assessment and management review schedules and results.
Ensuring all Inspectors are suitably qualified for assigned inspection activities.
Ensuring review of manufacturing special processes as specified in applicable contract requirements.
Reviewing Inspection Assignment Packages and ensuring source inspections at vendor shops are performed in accordance with approved inspection and test plans of Purchase Orders.
Reviewing inspection reports and communicating results to affected parties as required. Reviewing all Inspection Release Notes.
Participating on Contractor internal assessments and performing Contractor external assessments.
Identifying, communicating and participating in resolution of issues resulting from all review, monitoring and assessment activities.
Reviewing the Engineering documents.
Review of ITP and Vendor Quality documentations.
Ensuring that any outstanding pending points, for the equipment and material ready for shipment, have been clarified and a solution implemented.
Review and management of the NCR during the post-order phase.
Ensuring the consistency of the inspection Disposition Report (IDR). B.) Project: “SAMREF Tail Gas Clean Up Project” - Saudi Aramco Mobil Refinery Client: Foster Wheeler
Location: Yanbu, Kingdom of Saudi Arabia
Company: Al Rushaid Construction Company Ltd.
Position: QA/QC Engineer (Mechanical/Piping/Welding) Date: May 27, 2014 – August 19, 2015
Saudi ARAMCO Approval: QA/QC Welding Inspector
Duties and Responsibilities that performed:
Review/Monitoring of approved Quality Inspection and Test Plan. 4 P a g e
Review/Monitoring of approved Welding Procedure Specification (WPS) and Procedure Qualification Record
(PQR).
Review/Monitoring of approved Welder Performance Qualification Test/Record.
Review/Monitoring of approved Drawings, Governing Standards and specifications.
Review Fabrication/Erection, documents and work quality in terms specification, workmanship and other variables as indicated in the above-mentioned documents of QC standard operating procedure and Client’s specification.
Quality surveillance, welding inspection, Documentation & Dimensional Check.
Ensuring workshop personnel are working to the correct procedure and process.
Inspection on all welding activities prior, during and after, which include material check, Inspection calibration certificate of equipments.
Conduct welding inspection activities related fabrication piping/columns, structural & tanks.
Monitoring & Review of Preheat/Post Weld Heat Treatment of piping joints.
Witness of Welders performance Qualification test as per Approved WPS.
Perform line checking and review test package prior to hydro testing by ensuring that all welding inspection and NDT activities affecting the quality of welds contained in each piping spools of an isometric have been completed and accepted.
Generate Non Compliance Report whenever deviations are observed during and after work execution.
Preparation of punch list for the balance activities are not affecting hydro test completion and clear punch list items after completion of activities and Plant commissioning activities.
Witness all hold points for Hydro/Pneumatic/PMI/Hardness testing etc. D.) Project: “SAMREF Clean Fuels Project” - Saudi Aramco Mobil Refinery and Worley Parsons Arabia Ltd. Client: Worley Parsons
Location: Yanbu, Kingdom of Saudi Arabia
Company: Al Rushaid Construction Company Ltd.
Position: QA/QC Engineer (Mechanical/Piping/Welding) Date: August 19, 2012 – March 28, 2014
Saudi ARAMCO Approval: QA/QC Piping Inspector
Duties and Responsibilities that performed:
Prepare of request for inspection (RFI) & testing including day to day direct coordination with the client representative for smooth execution of QC activities.
Prepare Quality Procedures, Inspection and Test Plan.
Performs inspection to fitted spools/fittings to check alignment, weld joint preparation, and dimension according to approved WPS and ISO drawings.
Checks fit-up preparation, flange acceptability, spool dimension, tolerance and alignment in compliance with the approved drawings.
Performs in-process inspection during pipe fit up, support installation, full welding of joints and supports, bolt tightening and hydro testing.
Endorsed weld joints requiring NDE to Third Party Inspector.
Prepare of inspection reports (i.e. fit-up, air blowing, gravity flow testing and hydro testing) using quality inspection forms as per approved ITP.
Evaluating the validity and acceptability of inspection, examination and testing results.
Line checks piping systems for completion as per approved drawings and P&ID’s prior to Hydro Testing.
Prepare and submit inspection reports and related documents to client.
Direct coordination with field operation personnel (piping and welding) regarding Quality matters and planning of inspection activities.
Generates punch list noted during line checking and verifies their acceptability after rectification.
Monitoring of completed inspections and tests for package completion.
Initiates the issuance of Surveillance / Nonconformance reports whenever discrepancies or deviations from project specs/procedures are observed during work execution. 5 P a g e
D.) Company: Amiantit Qatar Pipes Ltd.
Address: Street 41, New Industrial Area, Doha – State of Qatar Position: QA/QC Inspector – GRP/RTR Pipes
Date: February 08, 2011 – May 30, 2012
Duties and Responsibilities that performed:
Responsible in conducting testing of sample such as Axial Tensile Test (ASTM D 638), Hoop Tensile Test
(ASTMD 2290), Stiffness Tensile Test(ASTM D 2412), Lost on Ignition or Destructive Test (ASTM D 2584), Glass Transition Test, Resin Viscosity (ASTM D 1824) and Gel Time (ASTM D 2471), Peak Exothermic Test.
Conduct visual inspection (ASTM D 2563) and measurement of length (ASTM D 3567) and thickness of GRP Pipe works ranging from 80mm to 4000mm diameter as per requirement.
Conduct final inspection on fittings and spool works.
Conduct preliminary or on-line and final inspection of fabricated pipe to ensure adherence to standard.
Coordinate with the Finishing Department regarding the repair needed after the inspection was done.
Monitor pressure or hydro test as per standard requirement.
Clarifies technical aspect pertaining to Quality Assurance to Technical Manager in case of doubt.
Operations and uses of various equipment and measuring tools such as pi-tapes, barcol impresor (ASTM D 2583), calipers micrometer, measuring tape, degree protractor, center finder, viscosity tester, weighing scale, and other gauges.
Ensure that the ongoing pipe fabrication is in accordance with the product specification sheets.
Check Advancing mandrel machine set-up as per specification.
Provide and coordinate with the Production regarding the day tank resin ratios in accordance with the humidity, speed and temperature of the day.
Informs Supervisor and Machine Captain if non-conformance found during fabrication.
Submit daily reports to Technical Manager.
E.) Project: Petron Refinery – PETRON AASF Project Address: Bataan, Philippines
Company: EEI Corporation
Position: QA/QC Engineer (Piping/Mechanical-Static and Rotating) Date: June 07, 2010 – January 25, 2011
Duties and Responsibilities that performed:
Inspection of locally purchased supplied materials for piping, and mechanical works.
Prepares Inspection and Test Plan (ITP) for mechanical and piping.
Review of mill certificates and COC of materials.
Monitor preservation, proper storage and handling of materials and equipments.
Review of Survey Reports of structural steel and machinery foundation.
Checking of foundation and anchor bolts location and elevation.
Inspection of packer plates setting and elevation prior for installation and erection of steel structures and machineries.
Monitor daily erected static equipment and machinery.
Inspection of plumbness and levelness of the erected structural members.
Witness bolt tightening and testing.
Witness grouting of steel structure and machinery foundation.
Punch listing of steel structure including access ways and platforms.
Inspection of setting, leveling and elevation of installed machineries and equipment.
Inspection of initial and final coupling alignment of pumps, fans and blowers.
Conduct fit-up / weld joint preparation inspection prior to full welding.
Inspection of fabricated pipe spool, supports and structural steel.
Witness and monitor Hydrostatic and Pneumatic Testing on completed piping system. 6 P a g e
PERSONAL BACKGROUND
Course Graduated: Bachelor of Science in Mechanical Engineering School Year Graduated: April 2010
College University: Southern Leyte State University School Address: Main Campus, Sogod Southern Leyte – Philippines Age: 30
Birth Date: November 08, 1988
Birth Place: Brgy. Mahayahay Mahaplag Leyte, Philippines Nationality: Filipino
Languages Spoken: English, Filipino and Arabic
Civil Status: Single
Passport No.: EC2671285
Contact this candidate