Engineer Design
Resume:
AMINE
BEN ABDALLAH
PERSONAL
Born: May **th, 1988
Nationality : Tunisian
Marital status : Single
CONTACT
*****.**@*****.***
Address :
Avenue Tahrir Tunis, Tunisia
LANGUAGE
Arabic : Fluent
French : Fluent
English : Fluent
SOFTWARE SKILLS
Microsoft Word
Excel
Autocad
Robot (good level)
Tekla Structures
Arche Graitec
Outlook
Aconex
Covadis 10.1
CURRICULUM VIATE
Civil & Steel Structure Engineer
KEY SKILLS
An energetic and self-motivated engineer who is able to oversee and direct the engineering and construction of industrial projects from conception right through
completion.
With over 7 years of invaluable experience in construction and engineering of industrial projects.
Supervising and overseeing the direction of the project, ensuring that the client’s specifications and requirements are met.
Liaising with the client, other construction professionals and, sometimes, members of the public authorities (Royal commission KSA and others authorities).
Follow up the progress and ensure the liaising with the project time schedule.
I was involved in the delivery (shipment) of equipment from Jizan port KSA to the site (customs clearance, insurance and transportation
Coordinating, inspections and supervision of construction activities.
Preparing daily weekly and monthly reports.
Maintaining quality control procedures and preparation for the method of statement.
Review and approval of subcontractor’s invoices.
Design of steel and reinforced concrete structures (industrial buildings, belt conveyor, pipe rack, shelters, platforms, piping supports, equipment foundations and machinery foundations
Preparation of calculation notes and checking structural drawings,
Coordinating and collaborating with the mechanical engineering team to get all design data for the preparation of sketches up to the elaboration of calculation models,
Elaboration of tendering folder including scope of works for the projects in accordance with applicable codes and procedures,
Prepare the bill of quantity (concrete,steel & finishing works),
ACADEMIC QUALIFICATIONS
2009-2012
Civil Engineering degree from the National
Engineering School of Tunis (ENIT).
2
CODES & STANDARDS
EUROCODE 0, 1, 2, 3 & 8
BAEL 91mod99
DTU 13.11
Cm66
NV65 mod99
Afnor 1990
CTICM
SIA 161 Swiss Codes
PS92
AISC american institute of
steel construction
IBC international building
code
SBC Saudi building code
a small knowledge of
ARAMCO Standards.
2007-2009
Preparatory Institute for Engineering Studies of
Manar Tunisia (IPEIM), Technology Branch.
2006-2007
Bachelor degree, Technology Branch.
CAREER HISTORY
2016-2019
Team leader engineer / Site manager – BIA Biomass
Industries Associates.
BIA is part of a German company (BMA) specialized
in EPC project, maintenance and project
management in the food and biomass industries with a focus on the sugar industries. Active across the MENA Region.
Duties:
2018-2019
-Site manager responsible for ensuring that the
construction of the project is completed on time
and within budget.
-Provide high-level customer service and ensure
compliance with Royal Commission & ARAMCO
standards and requirements.
-Ensure that all construction activities comply with IFC drawings and project specification.
-Manage daily on-site operations such as meetings, inspection and shop drawings approval.
-Organize business review meetings with clients to improve performance continuously and qualitatively.
-Coordinate with steel structure supplier and to
resolve the technical issues to higher the
productivity on site.
-Develop and maintain a relationship with
management and supervisors to resolve progress
issues.
2016-2018
- Team leader design engineer of steel structures
& concrete foundations according to the applicable standards (Eurocodes, AISC, IBC
-Analysis of the geotechnical report and extract data related to the design.
- Development of the the construction permit ( royal commission KSA)
-Seismic and dynamic analysis of structures by
software Robot Millennium,
-Preparing calculation notes,
-Preparation of scope of works and specifications,
-Produce the materials bill quantity and cost
estimate.
3
Project :
.AL REEF SUGAR REFINERY .CO
The refinery is located in Jazan economic city– Saudi Arabia, with a annual production capacity of
1 000,000 tons of refined sugar.
The project consists of the following stations and buildings:
- Two raw sugar storage each one has 150 000
tons capacity.
- Process building 5000 m2 with 4 floors.
- Three conditioning silos 3000 tons each one.
- Conditioning & dedusting building.
- White sugar packing & storage station.
- Workshop & chemical storage.
- FGD flue gas desulfurization station.
- Power plant 14 MW capacity (EKOL &
SIMENCE)
- Two fuel tanks 3000 m3 each one.
- Two molasses tanks 3000 m3 each one.
- Seawater desalination plant 250 m3/h.
- Waste Water Treatment plant.
- CO2 Station, air compressor station.
- Fire fighting system.
- Underground network.
- Pipe rack 650 M.
- Conveyeying system of sugar (belt conveyors
& elevators)
- 1350 CFA Piles diameter 700,800,1000.
- Soil improvement 2000 stone column.
- 5544 tons steel structure.
- 45000 m3 reinforced concrete.
4
2014-2016
Civil Works Supervisor – PSI Petroleum Industrial
Services.
In PSI, I was involved in the civil and structural supervision of projects for the following Oil and Gas companies.
OMV - Tunisia (Company oil & gas Onshore)
Duties:
My duties include the supervision of civil and
structure works, control of the work quality done by the contractor for all the brownfield projects.
-Follow Up and check all documentation proposed by the contractors.
-Ensure that all activities are performed with the proper degree of safety and environment
protection.
-Technical inspection of earthwork, foundation,
concrete works & steel structures as per project
specifications, drawings and standards.
-Ensure that all activities are performed with the respect of the contract, purchase order and change order.
-Anticipate potential problems, analyses and
propose corrective actions.
-Preparation of the daily report, weekly, monthly
and final report.
Projects :
My achievements include, but not limited to, the
followings:
.WAHA VRU Installation of vapor recovery units,
structures and piping supports, concrete slabs
foundation, electrical manholes.
.HP & Booster Pump Shelters, construction of
shelters for HP& Booster Pump area, foundation
work, assembly of steel structures.
.Welding Workshop, construction of welding
workshop shelter, foundation work, erection of steel structures.
.Fire Fighting Pumps, construction of firefighting system, structures, piping supports, concrete slabs, foundation and electrical manholes.
.WAHA Flaring System, connection of purging gas
lift compressors to HP flare, structures and piping supports, drain pit.
5
2013-2014
.CHEROUQ Flow Lines, repair of CHEROUQ
gathering system 67 km long pipeline 8''.
.WAHA Helipad, construction of helipad as per
international standards ‘’night & day flight’’.
.VHF Pylons, construction of two VHF towers 30 m
height, concrete foundations and site erection.
.NAWARA work over, upgrade NAWARA well sites
according to CTF layout, earthworks, foundation
slab of rig bads. (South Tunisian Gas Project).
.SONDES drilling well site, construction of new
well site according to CTF layout, earthworks,
foundation slab of rig bad.
MEDCO ENERGI – Tunisia (Company oil & gas
Onshore)
Among my assignments with PSI, I was involved in
EPF MEDCO ENERGI. This project consists to
construction a new early production facility, located in the south Tunisia. My achievements include, but not limited to, the followings:
Duties:
-Inspect, control and supervision of the civil work activities based on the project specifications, scope of work, standards, and safety requirements.
Structural Design Engineer– SICS NAF
(France and North Africa) - Company of engineering and consulting in structures.
Duties:
-Design of steel structures according applicable
standards (Eurocodes, CM66),
-Seismic and dynamic analysis of steel structures by software Robot Millennium,
-Shop drawings review,
-Prepare of calculation notes,
-Prepare of schedule for execution.
Projects :
In SICS NAF, I was involved in the structural design of the following projects:
.ROZIER Iron & Steel Factory Phase 1 (4 Industrial units 14000 m2, 16 overhead cranes capacity: 3600 – 10000kg).
.ROZIER Iron & Steel Factory Phase 2(Storage
6
2012-2013
warehouse 5000 m2 area covered by steel structure).
.ORCIERES (Hall of Skating Rink 9600 m2 area
covered by steel structure).
Civil and Steel Design Engineer–CIAG Concept
(Tunisia) - Engineering Office for Industrial
projects.
Duties:
-Design of steel & concrete structures according to the applicable standards (Eurocodes, CM66, BAEL
-Seismic and dynamic analysis of structures by
software Robot Millennium,
-Design of steel & RC structures, calculations,
analysis and issuance of the IFC drawings,
-Preparing calculation notes,
-Preparation of scope of works and specifications,
-Preparation of schedule for execution,
-Produce the materials bill quantity and cost
estimate.
-Analysis of the geotechnical report and extract data related to the design.
Projects :
In CIAG, I was involved in the civil and structural design of the following projects:
.ASM TRAILERS- North Africa Holding (Industrial
factory of oil trucks, 9500 m2 area covered by steel structure, 4 overhead cranes capacity: 7600 kg).
..BOUCHAMAOUI INDUSTRIES (LPG Storage facility
SNDP, pipe rack, piping supports, loading station)
.ALKIMIA GROUP (Salt Factory of Tataouine )
-Sulfate Sodium Storage hall 7500 m2,
-Workshop & Warehouse 5000 m2,
-Production Facility 1500 m2 Height 25 m.
.TUNISIE OUATE (Paper manufacturing plant).
-Shelter 3500 m2, underground production unit.
.SOSTEM (Mineral water).
-Storage hall of mineral water 4000 m2
(CRISTALINE),
-Air compressor station (SAFIA II),
-Production facility 2700 m2 (MARWA).
Contact this candidate