Sign in

Engineer Project

Toronto, Ontario, Canada
March 14, 2019

Contact this candidate



Sarder Sadique, Ph.D.

***-** ******** *****, ******* ON, M1L1K9, Canada Tel: 416-***-****; Cell: 647-***-**** Email: Citizenship: Canadian CAREER OBJECTIVES

A challenging Robotics/ Controls Engineering/ Structure/ Research and/or Product Development/ Medical Equipment/ Oil & Gas Field/ Nuclear Safety/ Scheduling/ Analysis / Budgeting/ Quality Control/ Inventory Control/ Solid Mechanics/ Machine Design/ Business Sales/ CNC Machining/ Development/ Marketing/ Manufacturing/ Industrial Engineering/ Hazardous Materials/ Training/ Project Management/ HVAC/ Thermal Design Systems position specializing in machine design, medical equipment design, mechanical testing, high tech materials, industrial & human factors (HF), failure investigation, root cause analysis, safety engineering, simulation (FDI) etc. HIGHLIGHT OF SKILLS

• Well-qualified/technically-proficient Robotics/Controls Engineering/Equipment Development/HVAC/Product Project Management/ Research Scientist/ Development with more than sixteen years of experience in building mathematical models in fluid mechanics and heat transfer area.

• P.Eng. - Engineering Intern Training (EIT), Professional Engineers Ontario (Completed PPE Exam)

• Emphasize regional economic environment and technology diffusion on total factor productivity (TFP) growth of manufacturing systems.

• Project design excellence in NX, Inventor, Solid works, Pro-E, Creo etc. and analyzing skills by ANSYS, FEMAP etc.

• Substantial experience: surface analysis, stress analysis, testing, failure analysis, silicon production and instrumentation.

• Experienced in NCS tracking, calculation, evaluations (NCSEs) and NCSDs, and NCS documents, dispositions problem reports.

• Excellent programming, MATLAB, Mathematica, Statistics, XRF, XRD and SEM-EDX and mathematical modeling to characterize materials.

• Experienced with cost estimates, tracking, developing and capital project requests and supervision of contractors.

• Expertise in Design of Exp. Fixtures, ISO 9001, Design Based Manuf. & Assembly (DBMA) and CNC machining.

• Able to work with high level of human factors and creativity on multiple projects showing strong organization skills and management using FDI.


Project Coordination:

• Managed several product design/control to the completion by monitoring “triple constraints” - project scope, time and cost.

• Planned, implemented & administered all engineering for ongoing and upcoming projects including feasibility & engineering study, risks analysis etc.

• Coordinated maintenance work to maintain work schedule and to minimize the impact on client programs and other internal stakeholders.


• Performed all activities for the acquisition of procurement; reviewed consultant’s proposals terms; negotiated costing and hired suppliers.

• Coordinated machine/equipment design, drawings preparation, drawings & specification; checked workability; compared design with standards.

• Facilitated purchase order in adherence to corporate procedures; ensuring entire scope of works. Project Reporting:

• Developed work and maintenance schedule for all project phases outlining critical tasks, status report of project milestones and schedules.

• Prepared production budget by preparing cost estimate for design, inspection, commissioning etc. with 10 years forecasting.

Project Administration:

• Monitored and maintained budget for the engineering and maintenance segments of the project.

• Forecasted, tracked and approved change orders initiated by consultants/engineers & coordinate changes among them. 2

• Maintained record of all drawings, agenda, minutes of meeting etc. corporate std. for project plans, specs, schedules, budgets/correspondences.

Project Closeout:

• Coordinated project closing procedures and Operation & Maintenance Manual, Warranty Certificates, extra stock material etc.

• Used CAD to develop, edit, and expand master layout drawings; attended final inspection and commissioning of major M

& E equipment.

• Collected testing & commissioning reports. Prepared & executed service agreement (for 1yr warranty period) with supplier service call response plan.


Management Skills

• Managed a team of mechanical engineers, both contract and full-time employees to meet both a critical schedule & customers’ needs i.e. HF.

• Prepared test - project reports summarizing observations, results and conclusions like energy audit, industrial trips etc.

• Performed non-conformances equipment designs and part fabrication for troubleshooting designs & equipment.

• Managed projects and coordinated group research activities, prepared/submitted research proposal, and promoted research collaboration.

• Upgraded labs by reducing maintenance and implemented training program for personnel to increase productivity and efficiency significantly.

• Managed first- and fourth-year Mech. Engineering labs and supervised capstone projects applying human factors/FDI. Research & Development Skills

• Conducted researches e.g. silicon production, Nano-tribology, FORTRAN and C++ Programming, Contact Mechanics & EHL, Motor Sports (HF).

• Led a group - Bio-composites, Nano-fiber Production, PMC composite that enhance innovative & scientific approach.

• Aided undergraduate project and master’s students in their academic research therefore improved their project accomplishment significantly.

• Redesigned oxidation furnace and installed power booster to allow more controlled heating and the temperature range from 1000 C to 1600 C.

• Performed research or project works based on operation research/professional practice emphasizing human factor, biomechanics, bioengineering.

• Managed three successful research and development projects based on FDI.

• Established project with design students to build hybrid street lights, smoke wind tunnel and vertical wind turbine. Laboratory Skills

• Solid mechanics, machine design, equipment design, 3D printing/modelling.

• Microscopy, metallurgical sample preparation, hardness test, tensile test, chemical analysis, etching.

• Always emphasize on cost estimating analysis for workforce (HF) & source of investment.

• Recorded information and numerical data with appropriate units and presented data effectively.

• Understand the importance of sample handling with respect to both solids and liquids.

• Identified and recorded the hazards and risks associated with the chemicals being used and applied safety aspects.

• Maintained a record of all the chemicals and all the equipment used in the experimental settings. Industrial Engineering Skills

• Designed & developed home made wind tunnel, solar water heater, low cost wind turbine, several machined projects under manufacturing courses,

• Designed, installed and maintained furnaces and hydraulic pressing machines at Savar Refractories as production engineer for defect free bricks.

• Selected refractory bricks at high temperature furnaces e.g. steel mills, foundry, glass factory and ceramic industries for customers’ satisfaction.

• Consulted with Indian consultants and professors with feasibility study for project profile of sponge iron production.

• Dealt fatigue tests, microscopes, testing procedures, observation forms, logs, and recording data during testing trials to maintain production.



Canadian ABC Company (Automobile/Car Components), Brampton, Toronto ON, Canada.

• Supported new product tests, scale production and equipment development considering the concept of human factors.

• Improved time scheduling for production, new production method using FDI concept.

• Reduced overall facility downtime and achieved aggressive production goal.

• Restructured operations for a major global conglomerate with a method to minimize lead-time & risk to investors.

• Designed feasibility, evaluation and start-up plan for new manufacturing. EMPLOYMENT EXPERIENCES

Position Industries/Labs Duration

Project Based Teaching/Learning-


York College of Pennsylvania, York, PA 174**-****-**** - 2018 Facilitator/Sessional Instructor SUNY Polytechnic Institute, 100 Seymour Road, Utica, NY 13502

2017 - 2018

Research Scientist/Facilitator


Special Metals, HTHP, Richwood Investment Casting, MU, Huntington, WV

2014 - 2017

Sessional Instructor Manufacturing Labs, CMU, Mount Pleasant, MI 2013 - 2014 Sessional/Lab Instructor Fluid Sciences Lab, UTEP, El Paso, TX 2012 - 2013 Facilitator/Demonstrator/Researcher Hybrid Energy Lab, Centennial Energy Inst, ON, CA 2009 - 2011 Supervisor/Lab Instructor Manufacturing/Fluid Labs, IKBN, Sarawak, Malaysia 2004 - 2007 Project Engineer/Sales Consultant Union Steel/ Manufacturing, Singapore 2000 - 2003 Lab/Sessional Instructor Fluid Mechanics/ Manufacturing Labs, Unitek Malaysia 1996 - 1999 Manuf. Engineer/Sales-Marketing


Savar Refractories Ltd, Dhaka, Bangladesh

1991 - 1996


Master of Applied Science (M.A.Sc.Eng.), Sustainable Energy, University of Toronto. 2010 Certificate Program, George Brown College, Toronto, Canada. 2008 Ph.D., Mechanical Engineering, National University of Singapore (22th in the world). 2006 B.Sc., Engineering (Mechanical/Manufacturing/Materials), Bangladesh University of Engineering and Technology, 1989. PROFESSIONAL AFFILIATION

• American Society of Mechanical Engineers (ASME)

• Intl. Conf. on Industrial Engineering and Operations Management (IEOM)

• Affiliated with Professional Engineers Ontario (PEO) - Engineer- in-Training (EIT)

• The Society of Tribologist and Lubrication Engineers (STLE) SKILLS & ABILITIES

Mechanical Engineering: CGAM (Center for Global Advance Manufacturing) production, quality control, new product. Computer: Programming (FORTRAN), MATLAB, Mathematica, SPSS, ANOVA, Homer, MS Excel, MS Access. Familiarities: Medical Device, Biodegradeable products, 3D Printing, SEM, EDX, X-Ray, UTM, Nano fabrication, Metallography, Microscope, Oxidation Process, Heat treatment, Induction Furnace, Refractory/Glass Furnaces. Human Factors Engineering: Simulation, Ergonomic Analysis, Ability to Work Independently/Cross-Functional Project Team, Efficiency Improvement.

Others: Team player, Technical reports writing, Responsibilities to share lab maintenance. TRAINING & WORKSHOP

• Karasuyama Plastic Co. Ltd., Karasuyama Machi, Mito City, Japan (1990), Injection molding - Six months.

• Foseco India Ltd., Calcutta, India (1993), Casting defects - One month.

• Tata Refractories Ltd. and Tata Iron & Steel Co. Ltd., Calcutta, India (1993), Refractories & Steel Production - One month.

• Bangladesh University of Engineering and Technology (1990), Non-Destructive Test (NDT workshop) - Two-week. References will be available upon request

Contact this candidate