Larry David Hoy

**** ****** **

Mission, KS *****

425-***-****

Email: ac8gm8@r.postjobfree.com

DESIGN ENGINEER

SKILLSET

●Structural Design (Primary and Secondary structures) using metallic, graphite and fiber composites materials, for OEM and Rework (Modifications and Retrofit)

●Design of Mechanical Systems including ECS, Hydraulics, and Landing Gear.

●Design of Aircraft Interiors including Lavatories, Galleys, Floor panels, Headliners, Sideliners, Seats, Ottomans, and Cockpit.

●Production, Prototype, and Conceptual Design

●Selection of materials to ensure strength, low weight and cost, and manufacturability.

●Creation of BOM and EBOM parts lists.

●CATIA V6, V5, AND V4 (including Sheetmetal workbench)

●CADAM and MicroCADAM

●PDM, SmarTeam and ENOVIA

●3D Modeling, 2D Drawings, Drawings release.

●Model based definition.

●Check for part interference and fit, form and function.

●Familiar with G,D, & T Principles and ISO9000.

●Familiar with CFR 14, Part 25 Certification Specs.

●Microsoft WORD, Excel, and PowerPoint.

EDUCATION:

●Bachelor of Science Degree

●Aeronautical Engineering, Wichita State University, Wichita, KS

EXPERIENCE PROFILE:

TEXTRON AVIATION- (contract) Wichita, KS, JUL 2015 to MAR 2016

●Cessna Citation Latitude and Longitude Aircraft

●Design of Interiors including Speaker Cabinets, Seat configurations, and Seat installations.

●Investigation of Floor structure in order to make provisions for installaton of Seating configurations for Prototype, Test, and Production Aircraft.

● Provision of Seats Attachment Hardware.

●Design Cabin partitions and Speaker Cabinets with Honeycomb core and Prepreg Ply layup skins.

●3D Modeling, 2D Drawings and drawings Release using CATIA V6 and ENOVIA (Internet based)

C & D ZODIAC- (contract) Santa Maria, CA

FEB 2015 to JUL 2015

●Design and Installation of Aircraft Cabin Interiors for Irkut MC Aircraft. Headliner panels, Sideliner panels. Cockpit Equipment and panels, installation

brackets.

●CATIA V5 3D Modeling, 2D Drawings, and Drawing Release on ENOVIA SmarTeam.

JAMCO AMERICA CORP- (contract) Everett, WA

JUN 2014 TO DEC 2014

●Design and installation of Lavatory, galley, seats, ottomans, and Partitions on the Airbus A350.

●CATIA V5, 3D Modeling, 2D Drawings, and Drawing Release on ENOVIA SmarTeam.

HEATH TECNA CORPORATION (ZODIAC)- (contract) Bellingham, WA

JUNE 2011 TO MAY 2014

●Mitsubishi Regional Jet, Mitsubishi Heavy Industries, Japan

●Responsible for the planning and design of Mechanical Equipment in lavatories, such as countertops, toilet shroud, cabinets and cabinet latches, also designed water supply and waste water systems CATIA V5 and Enovia Smarteam.

●Austria Airlines Boeing 767 Freighter to Passenger Retrofit

●Structural modifications and Rework design of Floor beams and Floor structure support installation of new Interior configuration using CATIA V4, CATIA V5 and Enovia Smarteam.

HAWKER-BEECHCRAFT CORP- (contract) Wichita, KS

SEPT 2009 TO JUNE 2011

●T-6 Trainer Aircraft, Baron and Bonanza Aircraft, King Air

●Revisions and release of Drawings-structural, mechanical systems and powerplant systems utilizing CATIA V5, CATIA V4, and MicroCADAM.

●PDM 2D Drawings Release.

D3 TECHNOLOGIES- (contract) Mukilteo, WA

MAY 2005 TO JULY 2009

●Boeing 747-8 Freighter and Intercontinental- Structural design of fuselage, Frames, Intercostals, Wing to Body Fairings, Wing tie-in structure, using CATIA V4.

●Provided Shipside Support, traveling to vendor Spirit Aerosystems, Tulsa, OK, to facilitate on-time delivery of first article.

●Boeing 777 Freighter- Structural design of fuselage Frames, Shear ties, stringers and stringer clips using CATIA V4 and KBE (Knowledge Based Engineering).

●Joint Strike Fighter- Lockheed-Martin Military Aircraft

●Structural design of wing fuel floors, Wing Spars and Intercostals

●3D Modeling, 2D Drawings and Drawings Release using CATIA V4 and PDM.

ACE CORPORATION- (contract) Lake Stevens, WA

MAY 2004 TO MAY 2005

●Boeing 747 Passenger-to-Freighter conversion

●Structural design of stanchions, Frames, Intercostals, Longerons, to reinforce upper-deck and Lower Lobe

●2D Drawings and Drawings Release using CATIA V4 PDM.

VOUGHT AIRCRAFT INDUSTRIES (Triumph)- (contract) Dallas, TX – Everett, WA

JULY 2001 TO MAR 2004

●Boeing 767 Aerial Re-fueling Tanker (GTTA), Boeing 787

●Structural layout and design on the fuselage.

●Performed Structural and Payloads conceptual layout and design

●Layout of Stow bins and supports, Integration of structures, payloads on the Boeing 787

●3D Modeling, 2D Drawings and Drawing Release using CATIA V5 and ENOVIA.

LOCKHEED MARTIN CORP- (contract) Fort Worth, TX

MAR 2000 TO MAR 2001

●F-16 Fighter Jet Aircraft

●Checking of part interferences at the assembly level

●Structural design and layout in fuselage, Frames, Skins, Longerons and Intercostals.

●Cockpit Equipment Installation and secondary structures design brackets

●3D Modeling, 2D Drawings and Drawings Release, and interference checking using CATIA V4 and COMOK (Electronic Mock-up).

THE NORDAM GROUP- (contract) Tulsa, OK

JUN 1997 TO DEC 1999

●Beechcraft Hawker 4000, Cessna Citation XL, Citation Ultra Aircraft

●Design of Thrust Reversers, and Mechanical Linkages, Mechanical Systems.

●Graphite Composites Layup Schematics on Engine Nacelles

●3D Modeling and 2D Drawings and Drawings Release using CATIA V4

RAYTHEON AIRCRAFT CORPORATION (Beechcraft)- (contract) Wichita, KS

JUN 1996 to MAR 1997

●Beechcraft Premier 1, Hawker Horizon Aircraft

●Design of the Landing gear, Landing gear hydraulic systems, and fuselage

●3D Modeling, 2D Drawings and Drawings Release using CATIA V4, Program Manager, and 3DCA.

CESSNA AIRCRAFT COMPANY- (contract) Wichita, KS

OCT 1995 to APR 1996

●Citation XL Aircraft

●Avionics Equipment design and Installations

●Antenna Design and Installations

●3D Modeling, 2D Drawings and Drawings Release using CATIA V4.

BOEING COMPANY- (contract) Wichita, KS

JAN 1995 TO OCT 1995

●737-700 Aircraft

●Design of fuselage structures

●CATIA V4 3D Modeling, 2D Drawings and Drawings Release.

●KBE (Knowledge-based Engineering) to produce Frames, Shear ties and Stringer clips, side fuselage and Lower Lobe

CESSNA AIRCRAFT COMPANY- Wichita, KS

MAR 1990 TO JAN 1994

●Citation X, Citation Jet, Citation XL Aircraft

●Design of structures in the fuselage, Canted Bulkhead, Engine beams, wing-body fairings

●Landing Gear design, Main cylinder, Oleo strut, Linkages, and Landing Gear Mechanical Systems design

●3D Modeling, 2D Drawings and Drawings release on CATIA V4 and CADAM.

BOEING COMPANY- (contract) Everett, WA

JUN 1987 to DEC 1989

●747-400, 767-600 Aircraft

●Design of fuselage structures, Frames, Skins, Floor beams, Floor Panels

●3D Modeling, 2D Drawings, and Drawings Release using CATIA V4, CADKEY, and board design.

BOEING COMPANY- Wichita, KS

AUG 1980 to MAR 1985

●B-52, Boeing 757, KC-135, Air Force 1 (original) Aircraft

●Structural design of Fuselage Frames, Skins, Door fittings

●Mechanical Systems design of ECS, Hydraulics and Linkages

●Payloads layout and design, Installation of Lavatories, Galleys, and Fllor Panels.

●Received Cost Savings Award on the B-52 for saving the company 250K by streamlining the design of a Heat Exchanger Rack

●Performed Engineering Check on the board, 767 Structures.

Contact this candidate