RESUME

KIRAN K.S.

Kakkery House, Karalam Post Office, Thrissur – 680711, Kerala, India

E-mail - ac8g28@r.postjobfree.com Tel: +91-854*******, Cell: +91-956*******

B.E Mechanical Engineering and certified welding inspector (CSWIP3.1 & ASNT Level II certification holder) with 10 Years of experience in QA/QC Mechanical construction Project. Worked on Expansion projects for Oil & Gas, Piping, Tanks, Fertilizer plant Construction, Chemical plant etc.

CAREER OBJECTIVE

Looking forward to being a part of a dynamic team of highly qualified professionals having abundant scopes for hard work, sincerity and honesty.

QUALIFICATIONS

B. Tech in Mechanical Engineering

• Muthayammal Engineering College, Nammakkal, Tamilnadu.

• Anna university

• 2005-2009

LANGUAGES KNOWN

SPEAK : English, Hindi, Malayalam, and Tamil.

READ : English, Hindi, and Malayalam

WRITE : English, Hindi and Malayalam

CERTIFICATION

• CSWIP 3.1 (TWI), CERT NO 72203

• ASNT NDT LEVEL 2 Certification

• Ultrasonic Testing (UT)

• Magnetic Particle Testing (MT)

• Radiographic Testing (RT)

• Liquid Penetrant Test (PT)

EXPERIENCE: - Total – 10 years

I CURRENT ORGANIZATION- LARSEN AND TOUBRO TECHNOLOGY SERVICES (L&T TS)

(period April 2018 to till)

Designation –QAQC Mechanical Engineer

1) PROJECT 1: - MCA -BT-INDIA Project, ATUL Ltd, Valsad, Gujarat.

L&T Technology Services doing PMC role in this project.

Role & Responsibility as a consultant quality engineer for metallic, nonmetallic and glass lined piping

Manage the site quality activities as per codes and standards.

Review and accept Welding Procedure Specification and Procedure Qualification Record.

Witness of Welder Qualification and certify welder certificate.

Inspect Fabrication and erection of piping job within plant.

After erection, Inspection of pipe line as per approved isometric drawings and freeze the welded joints.

Verify the Line History Sheet and release the pipe line for hydrotest.

Day to Day fit up and weld visual checking offered by contractor and validate the same.

Stage wise inspection of welding.

Inspect Fabrication and erection of Tank, Vessels, column within plant.

Ensure completion of NDT activities and review reports and documents.

As per site working condition Observation on Quality Aspects to be generated.

Inspection of Incoming material and review test certificates.

Interpretation and review of radiographic films as per codes and standards.

Monitoring and verifying of final documents that generated by the contractor.

Witness and inspect Laminator/Welder qualification for nonmetallic piping

Inspect Fabrication and erection of FRP pipe line and equipment.

II ORGANIZATION- TECNIMONT PVT LTD

(period April 2014 to 2017)

Designation –QAQC Engineer / welding inspector piping

2) PROJECT 1: - ONGC Petro Additions Ltd (OPaL). Dahej Petrochemical Complex. HDPE/LLDPE Swing Unit (2 X 360 KTPA), Dahej, Gujarat.

3) PROJECT 2: - ONGC Petro Additions Ltd (OPaL). Dahej Petrochemical Complex. PP (poly propylene) Unit, Dahej, Gujarat.

4) PROJECT3: - Bharat Petroleum Co. Ltd (BPCL). Ambalamukal, Kochi. Integrated Refinery Expansion Project (IREP site)

• Crude Distillation Unit / Vacuum Distillation Unit (CDU/VDU)

• Fluid Catalytic Cracking Unit (FCCU)

• Delayed Coker Unit (DCU)

• Vacuum Gas Oil (VGO)

• Diesel Hydrotreater (DHDT)

III ORGANIZATION- LARSEN AND TOUBRO (L&T-Heavy Engineering Division(HED))

(period august 2013 to 2014)

Designation –QAQC Engineer (MECHANICAL)

SHUT DOWN PROJECT 1: - Orifice Chamber Revamp Including TSS for FCCU Revamp in Fluid Catalyst Cracker Reactor & Regenerator Unit(FCCU), and PRU Shut down project at site of IOCL Refinery, Mathura – Utharpradesh.

IV ORGANIZATION- TECNIMONT ICB PVT LTD

(period august 2011 to 2013)

Designation –QAQC Engineer (MECHANICAL)

PROJECT 1: - Ammonia Feed Stock Change Over Project at site of National Fertilizer Limited, Nangal - Punjab.

PROJECT 2: - CHTU (Heavy Coker Oil And Gas Hydro-treating Unit), Mangalore Refinery and Petrochemical Limited (MRPL) -Phase3

Role & Responsibility as quality engineer.

Inspection &Witness of loop testing of piping network and final box-up.

Inspection of fit-up & welding.

Preparation of welding database.

Inspection of sand blasting, wrapping coating & painting of pipes and structure.

Monitoring activities like fit up, welding, RT, PWHT, DPT, PMI and UT.

NDT clearance of test packs, preparation and witness of hydro test.

Preparation of WPS and witness of WQT & PQR.

Perform welding and other consumable verification and testing.

Prepare welder status, NDT backlog status and WPS status for progress review and quality audit

NDT backlog dilution and NCR closer.

Inspection of fabrication and erection of piping.

Inspection of tank works (Neutralization storage tank)

Inspection of structural and support works.

The stage wise inspection for the welding is carried out as per the Following order; Edge preparation, drawing verification, fit-up inspection, and Visual inspection. Preparation of all the required documents and Reports, Offering of joints for NDT, PWHT as per requirement.

V ORGANIZATION: PARAMOUNT LIMITED (period September 2010 to august 2011)

QA/QC ENGINEER (MECHANICAL)

: Project - Waste Water Treatment Plant

: Main Con. - Engineers India Ltd. (EIL).

: Owner - Mangalore Refinery Petrochemical Ltd (MRPL) .

: Site - Mangalore site. Karnataka.

Working in MRPL Phase-III Project construction, mechanical erection, commissioning and inspection of tanks and equipment welding and fabrication works –

PROJECT 1: - Waste Water Treatment Plant (WWTP) at site of Mangalore Refinery Petrochemicals Ltd (MRPL) ONGC.

PROJECT 2: - Wet Air Oxidation System (WAO) at MRPL Site

NATURE OF WORK-1

• Inspection of fabrication and erection of storage tanks: -

Conducted the Qualification of Welding Procedure, Welder Test, Witness the Mechanical Test for test pieces, Preparation of PQR, Preparation of WQT Records, Welder Certificates and Documentation for API-650.

• Welding Procedure Qualification & Welder Test: - Conducted the Qualification of Welding Procedure, Welder Test, Witness the Mechanical Test for test pieces, Preparation of PQR, Preparation of WQT Records, Welder Certificates and Documentation for API-650.

• Bottom Welding Inspection: - The stage wise inspection of the bottom plate welding and drawing verification, fit-up inspection, Visual inspection. Preparation of all the required documents and Reports, inspection of vacuum box testing for the bottom lap joints.

• Horizontal and vertical Welding Inspection

• Roof and Structure Welding Inspection: - inspection of roof lap joints, including curve angle and wind grinder, inspection of main rafter and sub rafter arrangements in roof structure, inspection of stair case welding as per drawing.

• Nozzle and RF pad inspection

• Shell course Inspection: - Witness the erection and alignment of shell plates, Inspection of diameter step by step, and final vertical and horizontal alignment of shell.

• Interpretation of NDT: - Inspection of DPT in joints, Interpretation of Radiographs and Report Preparation etc.

• Equipment Inspection: - Witness the erection and alignment of Static and Rotary equipment, Inspection of level, location and final alignment. Preparation of all related documents.

• Pneumatic & Hydrostatic Test: - Preparation of test packs as per site requirements, Witness the Hydrostatic & Pneumatic test of tank erected at site and its documentation. Witness the Flushing and internal cleaning processes and its documentation.

VI Graduate Mechanical Engineer Trainee at Century Rayon, Thane, Maharashtra (B.K. Birla Group) (period 2009 august to 2010 august)

• Project - Acid Absorption Crystallization System (Rayon spinbath)

• Maintenance section of Auxiliary Division.

NATURE OF WORK-2

• Maintenance supervisor trainee to ensure the smooth running of Acid Plant.

• Supervise the work distribution and material handling in Rayon spinbath division.

• Manage the maintenance work in the plant like, pipe line leakages, valves, motors, pumps and pump over hauling etc.

• Shut down work for the entire plant.

IT Skills

MS office

Computer Application

Computer Hardware and Networking

Passport Detail

Date of birth : 13.05.1988

Passport No : Z4466325 (Date of Issue 26.02.2018 & Expiry- 25.02.2028)

Driving License, No : KA19 201********

PERSONAL DETAILS

Father’s Name : Mr. Sankaranarayanan KV

Mother’s Name : Mrs. Girija MB.

Marital Status : Married

Nationality : Indian

DECLARATION

I hereby solemnly declare that all the details stated above are true to the best of my knowledge and belief.

Yours sincerely,

KIRAN K.S.

Contact this candidate