RICHARD GONZALES LLEVA

June **, ****

Bonifacio St. Morong Bataan

Email Address: ac8al5@r.postjobfree.com

Contact Number: +974-****-****

Passport no.: EB7113335

OBJECTIVE: To effectively utilizing My Professional Experience in Leading Team safely to Achieve over all Corporate and Project Objectives.

WORK EXPERIENCES

RIGGING/LIFTING SUPERVISOR

TERRATEST LCC

Doha Micro Tunneling

December 10, 2016 to September 23, 2017

Duties and Responsibilities

Coordinating and supervising all lifting activities in accordance with the Lifting Plan

Briefing all lifting team members (i.e., crane operators, riggers and signalmen) on the Lifting

Plan, risk control measure and safe lifting procedure before the commencement of any lifting operation

Ensuring that only registered crane operators, appointed riggers and appointed signalmen participate in any lifting operation involving the use of mobile and tower cranes

Ensuring that the ground conditions are safe for any lifting operation to be performed by mobile cranes

Be present during all lifting operations

If unsafe conditions are reported to him, to take suitable measures to rectify the conditions so that the lifting operation can be conducted safely.

RIGGING/LIFTING SUPERVISOR

QDVC- RLS-JV

Doha Metro Project REDLINE SOUTH

March 16, 2016 to November 30, 2016

Duties and Responsibilities

Shall ensure that adequate inspection and maintenance of lifting equipment is

carried out by the Lifting crew or Subcontractor.

Shall monitor the lifting operations to ensure that they are being carried out

effectively in accordance with the established Work Method Statement, Risk

assessment

Shall ensure that all lifting and rigging personnel undergo and

pass documented thorough competency assessment (RLS-JV rigger level

assessment) before being permitted to operate unsupervised on the project.

Shall ensure with the subcontractor nominated appointed person that

subcontracted riggers undergo and pass the documented thorough competency

assessment (RLS-JV rigger level assessment)

Shall be in charge of the quarterly comprehensive internal control of lifting

gears. The purpose of the internal control is to provide details of the manner in

which the regular inspection and identification of lifting and rigging equipment

/gears used in the construction process of RLS project is being executed.

RIGGING/LIFTING SUPERVISOR

SAMSUNG EPC Co. LTD.

Riyadh Clean Transportation Fuels Project (Saudi Aramco)

December 2014 to March 15, 2016

Duties and Responsibilities

In charge of all lifting activities in the site loading and unloading materials

Insure all cranes are in a good condition before approved it to operate on site.

Implement Safe lifting procedure

Write down a lifting plan for all lifting operations, making a Permit to Work (lifting permit).

Supervision of crane operators and riggers in lifting activities

Plan and supervise critical lift in consent with crane operators, riggers and site supervisors

Inspection and certification of lifting accessories and equipment’s

Ensuring all processes, procedures and work practices are practical, accurate and fit for purpose for lifting equipment.

Assisting site team leaders in the site implementation of lifting equipment projects.

Ensure the training of the personnel involved in handling and lifting operation on site.

Monitor and supervise all lifting including heavy lifts operations such as during Risers lift operations.

RIGGING/LIFTING SUPERVISOR

SAMSUNG SAUDI ARABIA Co. LTD. (SSA)

Co2 Capture and Injection Facilities Project (Saudi Aramco)

February 2013 to December 2014

Duties and Responsibilities

Coordinate day to day works to the rigger and assist to them for any rigging / lifting activities.

Prepare method statement /Rigging studies for rigging operations.

Prepare Risk Assessment for rigging operation.

Carryout periodic Inspection of all rigging hardware such as wire rope, web sling, spreader bar, shackles, chain block, body harness etc.

Study and prepare rigging plan before rig-up / erection of heavy lift equipment.

Explain and enforce company rules and regulation, quantity and safety requirement and train subordinates in the correct method of doing their work.

Organize daily planning of crane working area.

Supervise and ensure the safe operation of cranes and forklift machines for the stacking, positioning and turning of loads, weight estimation and special lifts.

Examine routine care and maintenance, fault analysis and safety of the machines in his charge.

Maintain standard lifting gear conducting tool box talk to the crew.

Maintain proper signals in actual lifting engaged in hoisting and moving loads to ensure safety of workers and material handled, using hard signal or radio.

Supervise the cranes boom, accessories, maintaining the log for each crane, ensuring erection of barriers and safety sign board in respect to lifting areas. Attending company internal walk thru.

EQUIPMENT and RIGGING INSPECTOR

SAMSUNG ENGINEERING Co. LTD.

Rehabilitation and Adaptation of Skikda Refinery Project Algeria (SONATRACH)

December 2010 to December 2012

Duties and Responsibilities

Responsible for day to day operations

Ensuring safety operation of all cranes and rigging activities on site.

Responsible for all lifts on site.

Responsible for ensuring that lifting equipment and gear are used in the right place (i.e. Cranes, Rigging gear, etc.).

Responsible for ensuring that lifting equipment and gear used have no defects.

Responsible for ensuring that lifting equipment and gear used are inspected and certified.

Responsible for ensuring that lifting gear used are color coded.

Responsible for ensuring that lifting equipment and gear used are maintained and stored properly.

Reporting any defects on lifting gear and equipment and remedial action required to carry out the repair.

Responsible for keeping and maintaining records and certification of all lifting equipment and gear on the project.

RIGGING SUPERVISOR

NESMA and PARTNERS Co. LTD.

Ras Tanura Refinery Diesel Hydro Treater Complex Under Samsung Engineering, Saudi Aramco

April 2009 to November 2009

RIGGING SUPERVISOR

NESMA and PARTNERS Co. LTD.

Shayba Gas Oil Separation Plant Under Consultation of SNC Lavalin, Saudi Aramco

March 2007 to February 2009

Duties and Responsibilities

Shall see that all working conditions are safe and that gear is in apparent safe working condition during the operation.

Shall see that operations are carried on in a safe manner.

Where there is an immediate danger to the health or safety of personnel, they shall stop the work, if necessary to avoid accidents

Shall act promptly in obtaining correction of any defect in the gear or machinery, or unsafe working condition.

Shall instruct the workers under them in the proper and safe methods of handling cargo, gear and equipment.

Shall make every effort to determine hazardous cargo in advance, and to have correct personal protection at hand tor known hazards.

Shall supervise the raising and lowering of booms.

Shall see that the removal or the replacement

of hatch covers, pontoons, strong backs or beams is supervised by the supervisor or Winch. Operator in charge of hatch.

In charge of operations shall arrange immediately and proper first aid for the injured by contacting the Safety on duty.

In charge general of the operations shall investigate and render a full report of any accidents to the Employer

Shall not be present on the job while under the influence of intoxicating liquor, or drugs of a stimulating or depressive nature, and shall not permit such conditions to exist.

Shall set an example for the worker sand shall observe all applicable rules of the Code which governs their employees.

RIGGING FOREMAN

NESMA and PARTNERS Co. LTD.

Northern Region Cement Project, Ar’ar Kingdom of Saudi Arabia

April 2006 to February 2007

Duties and Responsibilities

Identify, prepare and provide the most suitable lifting accessories for the task.

Ensure that the lifting accessories are in good condition.

Conduct the lift using the correct rigging method i.e. choker hitch double wrap

or four leg slings etc.

Give clear and concise operating instructions to the operator either by radio or

hand signals.

Ensure the safety of personnel and equipment in the lifting area.

Understand the limits of the lifting machinery and accessories.

Always practice good housekeeping.

Pre-use inspection of all lifting accessories to ensure suitability for use by verifying adequate color coding. third party certificate validity and visual checking for any discrepancy on the required lifting accessory to be used.

Storage, maintenance and upkeep of all lifting accessories.

Assist with periodic examination and color coding examinations.

Removal from service of any defective lifting accessories.

Attend all tool box talks and pre-job safety meetings.

Attend all necessary site safety meetings.

Carry out rigger duties in accordance with requirements, lifting operation procedure, Stop work in the event of an unsafe act or condition.

RIGGER III

AGAP and PARTNERS CONTRACTING Co. LTD.

Al Fassel PDH Plant Project Yanbu Kingdom of Saudi Arabia

March 2005 to February 2006

RIGGER III

AGAP and PARTNERS CONTRACTING Co. LTD.

Two Grades of Gasoline and Additional Capacity Requirements Duba Bulk Plant, Saudi Aramco

January 2004 to January 2005

RIGGER III

AGAP and PARTNERS CONTRACTING Co. LTD.

Haradh Gas Plant Saudi Aramco Project

February 2002 to December 2003

RIGGER III

AGAP and PARTNERS CONTRACTING Co. LTD.

Replacement Generator Aramco Abqaiq Saudi Aramco

May 2001 to January 2002

RIGGER III

PDM SAUDI ARABIA

Yanpet Expansion Project, Yanbu Petrochemical Co.

Sabic Chemical Terminal Tankage

Yanbu Port Expansion Project

ABV Rock Group Abha Site -6

Saudi Aramco Abha Bulk Plant and other Major works in Yanbu Fabrication Shop

March 1998 to March 2001

Duties and Responsibilities

Knows and complies with all relevant safety rules and regulations.

Assembles rigging to lift and move equipment and materials in construction project. Selects cables, ropes, pulleys, winches blocks and sheaves according to weight and size of load to be moved.

Attached pulley and blocks to fixed overhead structures such as beams, ceilings and gin hole booms, with bolts and clamps. Attached load with grappling devices such as loops, wires, ropes, slings and chains to crane hook. Gives directions to bridges or crane operator engaged in hoisting and moving loads, to ensure safety workers and materials handles using hand signals, loudspeaker or radio.

Sets up braces and rigs hoisting equipment using hand tools and power wrenches. Splices rope and wire cables together to make or repair slings and tackle.

TRAININGS and CERTIFICATIONS ATTENDED

H2S/BA AWARENESS (QP APPROVED)

CONFINED SPACE ENTRY

Rigging Supervisor - TUV SUD MIDDLE EAST LLC (Certificate no. CLEDQ -16-WB-42161)

Rigger I - Certified by Saudi Aramco (Certificate no. 7116)

Rigger II – Certified by Saudi Aramco (Certificate no. 6097)

Rigger III – Certified by Saudi Aramco (Certificate no. 4768)

(Certificate no. 4711)

(Certificate no. 3987)

EDUCATIONAL ATTAINMENT

Electronic Technician

Central Luzon Institute of Technology, Olongapo City Philippines

Morong High School 1986-1990

Mechora Aquino Elementary School 1980-1986

Contact this candidate