Resume

Sign in

Mechanical Engineer Project

Location:
Rawdat Al Khail, Qatar
Posted:
April 29, 2019

Contact this candidate

Resume:

CHRISTIAN H. RODRIGUEZ

Graduated as: Bachelor of Science in Marine Engineering

Bachelor of Science in Mechanical Engineering

DESIRED POSITION:

To obtain a position as: QA/QC Mechanical Engineer

PERSONAL HIGHLIGHTS

I have been working relevantly as Mechanical Engineer for 13 years now, with outstanding background in the inspection, supervision, implementation of HVAC chilled water system, DX units-VRF/VRV or split units, package air conditioning units and ductworks, firefighting protection system, plumbing, storm drainage and sanitary sewer drainage systems both in high - rise building construction and infrastructure projects.

WORK EXPERIENCE

POSITION: QA QC MECHANICAL ENGINEER

COMPANY: REDCO INTERNATIONAL TRADING AND CONTRACTING COMPANY DOHA, QATAR

PROJECT: QATAR RAILWAY – GEEN LINE UNDERGROUND PROJECTS - HAMAD HOSPITAL STATION

DATE: DECEMBER 2018 TO PRESENT

Key Responsibilities Handled

Summary of Skills:

To inspect in-process activities and organize Supervision Engineer’s inspection for releasing the area for further activity.

To ensure QC Procedures are being implemented at all locations of construction activities.

To follow-up the corrective action procedures for non-conformities and forward the re-inspection report to the QA QC Manager.

To verify and maintain all Quality records for reference.

Inspection for Tunnel MEP services such as Firefighting, Chilled Water and Ducting.

To verify the existence of Quality records at all relevant locations and ensure that are being completed and maintained in accordance with QC Procedures and relevant Method Statements.

To ensure that Quality records (Inspection Requests, Checklists, etc.) are signed off for activities especially those noted as Hold Point in the ITP’s.

To check and verify the incoming contract materials for its compliance with the specified parameters.

To perform joint sampling activities with Supervision Engineers for tests in accordance with the Quality procedures and project specification.

Issuing SNAG and Uploading to SNAGR WEB for Construction to Comply.

Preparing Quality Verification Plan (QVF) for Payment Event of all completed MEP Works.

To prepare Quality reports on daily basis and submit to QA QC Manager.

To arrange and schedule Factory Acceptance Test (FAT) or as may be directed by the QA QC Manager.

To conduct offsite inspection of construction related materials prior to site deliveries on major and particular materials as identified.

Monitor QC schedules are meeting the target dates, otherwise carry out updates and submit in a timely manner to the QA QC Manager.

Alerts all personnel the “RIGHT FIRST TIME” approach is being propagated at all times.

WORK EXPERIENCE

POSITION: QA QC MECHANICAL ENGINEER

COMPANY: ERAM ENGINEERING SUPPLIED AT: QATAR DESIGN CONSORTIUM (QDC) GREEN LINE UNDER GROUND PROJECT, AL ALIA/ QP RASLAFFAN WASTE MANAGEMENT PROJECT, VOLTAS LLC DOHA FESTIVAL CITY PROJECT, AL SALEEYA TOWER HIGH RISE BUILDING AND UMM AL HOUL POWER PLANT PROJECT

DOHA QATAR

PROJECT: GREEN LINE UNDERGROUND PROJECT, WASTE MANAGEMENT PROJECT, DOHA FESTIVAL CITY PROJECT, HIGH RISE BUILDING AND POWER PLANT PROJECT

DATE: FEBRUARY 2016 TO FEBRUARY 2018

Key Responsibilities Handled

Summary of Skills:

Performed all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site.

Inspection for Tunnel MEP services such as Firefighting, Chilled Water and Ducting.

Carried out inspection and checking for all quality related procedures in the site and ensures activity at site are as per approved method statement and inspection test plan.

Implemented safe working practices as per the project’s Health, Safety and Quality procedures.

Coordinated with the consultant’s representative and Site In-Charge for work inspection request (WIR), material inspection request (MIR) and meeting about quality problems including closure of Non – Compliance Report.

Reported to the QA/QC Manager, control and monitor all activities related to Quality Management System (QMS).

Taking care of all QA/QC documents of the entire project including the certificates, calibration, test results, work inspection requests, non – compliance reports and site instructions/observations, permanent materials delivered and other QA/QC documents. Responsible of closure of non – conformance report and site instruction.

Responsible in the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to HVAC chilled water system, DX units-VRF/VRV or split units, package air conditioning units and ductworks, firefighting protection system, plumbing, storm drainage and sanitary sewer drainage systems and other disciplines interfacing the multidisciplinary operations.

Developed method statement for the activity including risk assessment and job safety environmental analyses and inspection test plan and checklist based on specifications of the project.

Carried out internal audit at site as scheduled in the project quality plan (PQP).

Liaised the technical engineer for submission of material submittals to consultant.

WORK EXPERIENCE

POSITION: MECHANICAL/PIPING INSPECTOR

COMPANY: GS NEOTEK

AKCHALAK, UZBEKISTAN RUSSIA

PROJECT: ETHYLENE GAS PROJECT

DATE: JULY 2014 TO NOVEMBER 2015

Key Responsibilities Handled

Summary of Skills:

Implemented safe working practices as per the Company’s Health and Safety procedures.

Ensured that Work Procedures and Method Statements for all activities are prepared and followed during work execution.

Responsible for all fit-up inspection of welded joints in shop and field.

Revised and review original drawing coming from the main contractor for additional joints or revision drawing

Supervised in the installation of mechanical equipment, data gathering, testing and commissioning until to the final handing –over of the project.

Raised Work Inspection Request (WIR) on-prior and final approval of works to the project consultant.

Inspection and witnessing air leak test of all welded reinforcing pads

Requested specific materials to the procurement department based from quantity take off.

Responsible for NDE request or welded joints for penetration test (PT), Radioactive Test (RT), Pre Weld Heat Test (PWHT) and Magnetic Test (MT).

Visual Inspection of welded tank shell plates

Responsible for levelling, roundness check, peaking and banding of erected tank.

Line Checking and preparing the not cleared package for punch list.

Commissioning team leader for Mechanical and piping procedure.

Coordinated with the project consultants for the schedule of site inspections and walkthrough.

Prepared As-built drawings as per site actual condition for project consultant’s approval that will be used in project final handing over.

Identified and reported to the project director regarding the snag lists issued by the handing over committee/consultants/client that are not included/mentioned in the project contract, BOQ and approved shop drawings.

Attended weekly the coordination and interface meetings with the project key personnel, in resolving issues and updates.

Responsible, in management and co-ordination of all project specifications,

drawings, and associated technical data, gaining the necessary approvals and ensures

the distribution and availability of the data where its need in support of project

quality is required.

Prepared, reviews and updates of short term of working programmed in terms of

labor and timescales, for the designation of supervisory staff and labor for work.

Reported any identified deficiencies or concerns during any phase of the project in

accordance with the company Quality Assurance procedures.

Prepared accomplishment reports on daily, weekly and monthly basis.

WORK EXPERIENCE

POSITION: MATERIAL SPECIALIST / PIPING INSPECTOR

COMPANY: JABEL OIL SERVICES SUPPLIED TO WAHA OIL COMPANY

GIALO/SAMAH SITE LIBYA

PROJECT: OIL REFINERY

GIALO/SAMAHL SITE LIBYA

DATE: AUGUST 2012 TO OCTOBER 2013

Key Responsibilities Handled

Summary of Skills:

Requesting the right material for the oil pipeline repair and for the new oil well to electrify and tie-in

Receiving and issuing materials using for construction work, electrical, mechanical and auto mechanic works.

Monitor & evaluate systems & procedures to look for improvements

Issuing of purchase orders, bill of lading, work order and ware house transfers.

Ensured that appropriate work procedures are properly implemented that works being completed are as per specifications.

Supervised in the installation of mechanical equipment and data gathering.

Visual inspection of welded joints in site for repair of damage pipeline

Prepared As-built drawings as per site actual condition.

WORK EXPERIENCE

POSITION: MECHANICAL/PIPING INSPECTOR

COMPANY: SAMSUNG ENGINEERING

SABAH MALAYSIA

PROJECT: OIL AND GAS TERMINAL

DATE: NOVEMBER 2011 TO JULY 2012

Key Responsibilities Handled

Summary of Skills:

Encoding daily welding report and radioactive inspection report in (FMCS) Field material control system.

Fit-up inspection at shop welded joints.

Responsible for the withdrawal of material for mechanical job including all spare parts for the entire vessel.

Conducted preliminary work inspection with the sub- contractor and then final inspection with consultant for approval.

Supervised in the installation of mechanical equipment, data gathering, testing and commissioning.

Attended progress meeting weekly with the consultant and client’s representative.

Coordinated and prepared of design input/output, validation, changes and formal

design reviewed with the project manager.

Prepared the selection, sourcing and scheduling and cost appraisal of all purchased

materials, gaining the necessary approvals to procure and ensuring the availability of

materials on site within the agreed timescale.

Provided the request by the project Quantity Surveyor with timely and accurate

reports in terms of work carried out and all associated costs and finances.

Coordinated with the client or client’s representative at handover ensuring the

availability and suitability of as fitted drawings and associated operation and

maintenance manuals.

Prepared and maintained of accurate registers for material and drawing schedules.

Prepared accomplishment report (daily, weekly and monthly).

WORK EXPERIENCE

POSITION: MATERIAL SPECIALIST/ PIPING INSPECTOR

COMPANY: JABEL OIL SERVICES SUPPLIED: WAHAOIL OIL COMPANY

PROJECT: OIL REFINERY

DATE: SEPTEMBER 2008 TO AUGUST 2011

Key Responsibilities Handled

Summary of Skills:

Requesting the right material for the oil pipeline repair and for the new oil well to electrify and tie-in

Receiving and issuing materials using for construction work, electrical, mechanical and auto mechanic works.

Monitor & evaluate systems & procedures to look for improvements

Issuing of purchase orders, bill of lading, work order and ware house transfers.

Ensured that appropriate work procedures are properly implemented that works being completed are as per specifications.

Supervised in the installation of mechanical equipment and data gathering.

Visual inspection of welded joints in site for repair of damage pipeline

Prepared As-built drawings as per site actual condition.

WORK EXPERIENCE

POSITION: QA/QC MECHANICAL INSPECTOR

COMPANY: CONSTRUCTING AND CONSTRUCTION ENTERPRISE LTD. SAUDI ARABIA

PROJECT: KHURAIS PROJECT

DATE: JANUARY 2007 TO JULY 2008

Key Responsibilities Handled

Summary of Skills:

Receiving and issuing materials using for construction work, electrical, mechanical and auto mechanic works.

Monitor & evaluate systems & procedures to look for improvements

Issuing of purchase orders, bill of lading, work order and ware house transfers.

Ensured that appropriate work procedures are properly implemented that works being completed are as per specifications.

Supervised in the installation of mechanical equipment and data gathering.

Visual inspection of welded joints in site for repair of damage pipeline

Prepared As-built drawings as per site actual condition.

EDUCATION

HIGHEST EDUCATION

Education Field Bachelor of Science in Marine Engineering

School P.M.I College

Location Quezon City Philippines

Date 1997 - 2000

Education Field Bachelor of Science in Mechanical Engineering

School Adamson University

Location Manila

Date 1998 – 2003

PERSONAL ATTRIBUTES

COMMUNICATION

Strong communication, interpersonal, and presentation skills.

Resourceful and detail-oriented; skilled problem-solver and multi-tasker.

A confident and concise communicator; able to deliver enthusiastic presentations with clarity and humor to diverse audiences.

Energetic self-starter with strong communication skills; work well independently or on a team.

A patient listener who fully focuses on speakers and understands a variety of accents.

A highly organized and friendly professional, able to establish long-term, positive and fun relationships with clients, co-workers and outside resources

LEADERSHIP

A dynamic team leader; able to bring energy, enthusiasm, and humor to motivate team members to achieve potential and meet objectives.

Highly motivated, goal-oriented professional; a decision-maker skilled in implementing new ideas.

Motivated self-starter; able to spark interest and take initiative.

Ambitious, flexible team member who loves to learn.

A flexible professional who enjoys learning new skills and quickly adapts to organizational changes.

An energetic team leader, able to communicate effectively with people of all ages and backgrounds, to work collaboratively to resolve problems, and to motivate team members to achieve personal and organizational objectives.

MANAGEMENT

Strong management skills; able to prioritize, delegate tasks, and make sound decisions quickly while maintaining a focus on the bottom line.

PROBLEM SOLVING

Understands, recalls, applies and adapts relevant information in an organized, safe and systematic way. Understands the needs of the situation and creates solutions to resolve problems.

TRAINING/ SEMINARS / CERTIFICATE

DATE TOPIC/COURSE TITLE

April 20.2001 Certificate in Microsoft Office (STI Colege)

December 2017 IOSH Certificate (TUTIS TRAINING CENTER, DOHA QATAR)

TECHNICAL SKILLS

High-energy, confident professional with an infectious enthusiasm for technology.

COMPUTER SKILLS

Operating System: Windows, 2000, 2003 Server, Windows XP & Windows 7.

Tools: MS Office, Word, Excel, and Outlook.

E-Mailing tools: MS Outlook, Windows Outlook, Yahoo and Google.

I am responsible, goal oriented, organized, and flexible as well. If training is needed and provided that would not be a problem for I am a fast learner and I always get the job done on time. And of course I am fluent in English both in speaking and in writing as well.

I do certify that the above information’s are true and correct to the best of my knowledge.

CHRISTIAN RODRIGUEZ

Applicant

Address : #65 Gulod Guyong Sta.Maria Bulacan

Mobile no: (Phil) +63-927*******

(Qatar) +974-********

+974-********

E-mail: ac88rt@r.postjobfree.com/ac88rt@r.postjobfree.com

ac88rt@r.postjobfree.com

Email: ac88rt@r.postjobfree.com

Mobile no: +974********/Email:



Contact this candidate