Mechanical Superintendent / Rotating & Static Equipment Inspector
Resume:
ALEJANDRO B. BALADHAY
Saint Claire St. San Antonio Subdivision
Little Baguio II, Red-V
Lucena City
Tel. # +63-042-***-**** / +63-042-***-****
Mobile # +639********* / +639********* / +639*********
E-mail: mailto:**********@*****.***
*********@*****.***
Nationality : Filipino
Date of Birth : July 10, 1955
Position : Mechanical Inspector/ Piping Inspector/ Mechanical Supervisor/
Mechanical Technician/ Permit Receiver and Coordinator
Rotating and Static Equipment Inspector
Marital Status : Married
Educational : Bachelor of Science in Mechanical Engineering
Attainment Feati University, Manila Philippines
Passport Number: EC8206897 Date of Issue: 04 July 2016 / Valid Until: 03 July 2021
WORK EXPERIENCE SUMMARY:
More than 30 years experience in Oil and Gas Industry with different companies (Projects) in Engineering, Construction, Inspection and Quality Control, Diversified experience includes construction of Buildings, Refineries, Cross-country Pipelines, Pumping Stations, and Oil and Gas / Industrial / Nuclear Power / Chemical / Sewage Treatment Plants. Wide range of proficiency in Process Rotating and Static equipments, such as Gas & Steam Turbine, Centrifugal Compressor, Boilers, Blowers, Hi-pressure pumps, Fin-fan coolers, Storage Tanks, Vessels, Columns and Exchangers. Familiar with International codes and Standards, such as API (American Petroleum Institute) and ASME (American Society of Mechanical Engineers).
OCCIDENTAL MUKHAIZNA LLC
SULTANATE OF OMAN
SEPTEMBER 2010 to NOVEMBER 2015
Position: Rotating and Static Equipment Inspector / Mechanical Technician
Responsibilities:
Responsible for performing daily inspection activities which involve the receiving, installation, periodic preservation maintenance of rotating equipment by utilizing advanced technical knowledge of inspection codes, standards, applications, as well as applying innovative concepts, technology and skills.
Monitoring day to day activities of the Construction Contractor’s rotating equipment installation activities to ensure compliance with contract documents, specifications, codes and standards.
Brings forward any concerns to the Senior Field QC Inspector with respect to Contractor progress, procedure, code and specification compliance, documentation, safety procedures or environmental compliance.
Inspect and verify that received equipment is properly preserved in accordance with applicable codes, standard practices and company specifications.
Responsible for the detailed recording of maintenance activities and requisition of critical spare parts utilizing the maintenance management system.
Active participation in safety briefings, safety talks and the risk assessment process.
Responsible for the input into the development of maintenance plans and procedures.
Integral part of commissioning team supporting mechanical rotating and static equipment prior for start up.
Support the development and data population of computerized maintenance management system.
Carry out routine site inspection and monitoring the application of the PTW system and performing PTW audits.
Responsible for ensuring compliance of the PTW procedures, and responsible for operating, monitoring and controlling the permit issuance system.
Ensure all documentation necessary for reliable control of work system is in place. This includes but not limited to keep approved updated procedures, P&ID’s, training matrices, MSDS, and equipment certification.
Control the register of approved PTW authorities and update it regularly.
QATAR GAS II and EXXON MOBIL LNG ONSHORE FACILITIES PROJECT
Ras Laffan, State of Qatar
January 2006 to November 2009
Position: Mechanical Inspector (Rotating, Static & Piping)
COMMON SULFUR PROJECT
QATAR GAS II and EXXON MOBIL LNG ONSHORE FACILITIES PROJECT
Ras Laffan, State of Qatar
November 2009 to August 2010
Responsibilities:
Provide full time oversight on all aspect of quality assurance on a USD13.4 Billion LNG Gas Project of QATARGAS Operating Company LTD, with objectives aimed at developing management systems, processes, practices and procedures required to align the project contractors handling activities with established goals for QATARGAS facilities.
Work includes in different phases of construction works such as equipment installation, final alignment and pre-commissioning stage of all rotating and static equipments.
Implements safety procedures, training requirements and management of specific type of quality requirements with the contractor’s representative on site.
Responsible for ensuring that the project facilities are constructed in accordance with the approved project design and specifications, applicable codes / regulations and acceptable work practices.
Provide construction quality assurance support, performing and/or coordinating specific QA/QC activities to ensure compliance of deliverables, with project specifications, during construction.
Provide leadership to contractor inspectors, supervisors and coordinators during project construction.
Maintain and monitor the implementation of approved QA/QC procedures, inspection Plan and Construction Work Methods.
Perform and conduct timely on-site inspection to ensure the construction works complies with drawings, standard and project specification.
Record inspection findings in job site, prepare and issue inspection report and non-conformance report.
Supervised and provide technical assistance to QC personnel and site supervisor
Witness the run-in test of Mechanical Equipment in the plant as per test procedures.
Monitor Mechanical Works of plant Equipment, Fabrication, Repair, Modification, Upgrading and Installation.
Verify and review design drawings with vendor drawing for possible discrepancies.
Conduct final inspection; prepare punch list and verifying completion of punch list item.
Monitor the implementation of all rotating equipment and static equipment preservation and preventive maintenance program.
Responsible for the supervision, testing and inspection of piping works and plant mechanical equipment, installation of the project. Also involves in preparation of hydro test package and turn over documents for mechanical completion and commissioning.
Participate in Mechanical Completion, Acceptance of Facilities.
Involve in the Installation & Inspection of HVAC Units, Ducting, Chilled water piping, Exhaust fan, Pressurization fan, Pumps and other related HVAC works.
Monitor and audit all rotating equipment preservation activities on a day-to-day basis.
Ensure contractor’s compliance with all relevant Quality Assurance Plans, Procedures, Inspection and preservation records
Participate in piping walk down, line checking, punch listing and testing when required
Preparation and execution of Piping Test Packages. Review all test packages as per system, pipeline checking and doing punch list for remaining work subject for hydro testing and final inspection
Control and Production of commissioning work-packs and Operational Test Procedures/
Planning ‘on site’ commissioning activities.
Liaise with Construction Supervisor to ensure Ready for Commissioning documentation is finalized and ready for acceptance.
Direct Construction Supervisor in clearing of any Punch-list items which affect commissioning.
Ensuring safe execution of work to ensure the Health, Safety and Welfare of the workforce and the protection of the environment through the avoidance of releases and spills.
JGC / KBR IN AMENAS GAS PROJECT
In Amenas, Algeria
Nov. 2003 to Oct. 2005
Position: Mechanical Inspector `
Responsibilities:
Supervision and inspection on the contractor and vendor activities for mechanical equipments installation such as pumps, blowers, fin fan coolers, compressors, heat exchanger, generators, storage tanks in conformance to project procedures, specifications and drawings
Work includes in different phases of construction works such as equipment installation, final alignment and pre-commissioning stage of all rotating and static equipments
Implements safety procedures, training requirements and management of specific type of quality requirements with the contractors representatives on site
Watch and record non-conformances
Conduct daily surveillance and assessment to monitor contractor performance, construction status and provide assistance to project personnel on quality related issues and concern to maintain company’s Quality Assurance Program
Implements safety procedures, training requirements and management of specific type of quality requirements with the contractor’s representatives on site.
Monitor Mechanical Works of plant Equipment, Fabrication, Repair, Modification, Upgrading and Installation.
Monitor the implementation of all rotating equipment and static equipment preservation and preventive maintenance program.
Responsible for the supervision, testing and inspection of piping works and plant mechanical equipment, installation of the project. Also involves in preparation of hydro test package and turn over documents for mechanical completion and commissioning.
Participate in piping walk down, line checking, punch listing and testing when required
Preparation and execution of Piping Test Packages. Review all test packages as per system, pipeline checking and doing punch list for remaining work subject for hydro testing and final inspection
Pump Station No. 3 Belabo, Cameroon, Africa
Esso Oil Exploration – Chad Cameroon Development Project
Kellog Brown & Root (KBR)
Sept. 2002 to Aug.2003
Job No. 7606
Position: Piping/Rotating Equipment Inspector
Responsibilities:
Conduct daily surveillance and assessment to monitor contractor performance, construction status and provide assistance to project personnel on quality related issues and concern to maintain company’s Quality Assurance Program
Conducts field inspection on all ongoing pipe spool fabrication and erection and completed piping line installation and welding works and conducts materials inspection as per application standards and required welding procedure
Conducts site inspection on piping fabrication and erection and check if it is as per isometric drawing. Check fit-up and dimensional inspection prior to welding
.
Preparation and execution of Piping Test Packages. Review all test packages as per system, pipeline checking and doing punch list for remaining work subject for hydro testing and final inspection
Preparation and execution of Piping Test Packages. Review all test packages as per system, pipeline checking and doing punch list for remaining work subject for hydro testing and final inspection
Participate in piping walk down, line checking, punch listing and testing when required
Responsible for the supervision, testing and inspection of piping works and plant mechanical equipment, installation of the project. Also involves in preparation of hydro test package and turn over documents for mechanical completion and commissioning.
ABDULLAH H. AL-SHUWAYER CONTRACTING CO. LTD
DAMMAM K.S.A.
From 1994-2001
QA/QC SUPERVISOR / FIELD MECHANICAL ENGINEER
CONTRACTS:
Shedgum Gas Plant
Debottlenecking Project
Saudi Aramco Shedgum, K.S.A.
Contract # 45944/00
Position: QA/QC Supervisor
Abqaiq Gas Plant
Upgrade Firewater & Drainage Facilities
Saudi Aramco Project – Abqaiq, K.S.A.
Position: Mechanical/Piping Inspector
Regional Sewage Treatment Plant and Effluent Disposal System.
Saudi Aramco Project, Abqaiq, K.S.A.
Position: QA/QC Supervisor/Field Mechanical Engineer
MOHAMMAD AL-MOJIL GROUP
DAMMAM K.S.A
QA/QC SUPERVISOR / PIPING
CONTRACTS:
Hawtah Stabilzer / ASL Storage and handling Facilities
Saudi Aramco Project, Pump station 3 Wasia, Riyadh, K.S.A.
Position: QA/QC Supervisor
16 “ Ø Truckline Project, Shedgum GOSP 1
Saudi Aramco, Shedgum K.S.A.
Position: Mechanical/Piping Inspector
FRAMATOME –SPIE BATIGNOLLES
PEOPLE REPUBLIC OF CHINA
1992 – 1993
PROJECT;
Guangdong Nuclear Power Station
Unit 1 and Unit 2, Daya Bay
Peoples Republic of China
Position: Piping Inspector
DEMAURO-SHUWAYER CONSTRUCTION CO. LTD
DAMMAM K.S.A
1982 – 1986
CONTRACTS:
Infrastructure Project of Saudi Aramco Pump Station 1 to Pump Station 4 @ East-West Pipeline
Position: Mechanical Inspector
Wave Protection for Refinery Tank Farm / Site Development
Royal Commission for Jubail and Yanbu Project. Jubail K.S.A.
Position: QC Mechanical Engineer
Sewage Treatment Plant Project-Under U.S. Corps of Engineers Management
King Khalid Military City
Hafar Al-Batin, K.S.A.
Position: Mechanical/Piping Inspector
Gas Oil Separation Plant
Saudi Aramco Project
Uthmaniya, K.S.A.
Position: Piping Inspector
JOANNOU AND PARASKEVAIDES OVERSEAS LTD.
DUBAI, UNITED ARAB EMIRATES
1979 – 1981
MAINTENANCE SUPERVISOR
CONTRACT;
Dhaid-Fujeirah Road Project
Position: Maintenance Supervisor
EMPLOYMENT HISTORY:
OCCIDENTAL MUKHAIZNA LLC 2010 - 2015
SULTANATE OF OMAN
Position: Rotating Equipment Inspector / Mechanical Technician
QATARGAS OPERATING COMPANY LTD. 2006 - 2010
LNG GAS PLANT / QATARGAS II PROJECT
RAS LAFFAN, STATE OF QATAR
ROTATING & STATIC EQUIPMENT INSPECTOR
PROJECT MANAGEMENT TEAM (PMT), QA/QC DEPT.
JGC / KBR IN AMENAS GAS PROJECT 2004 - 2005
IN AMENAS, ALGERIA
MECHANICAL INSPECTOR
ROTATING EQUIPMENT INSPECTOR
KELLOG BROWN & ROOT (KBR) 2002 - 2003
PUMP STATION NO.3 BELABO, CAMEROON
TCHAD CAMEROON CONSTRUCTORS (TCC)
ROTATING EQUIPMENT INSPECTOR
ABDULLAH H. AL-SHUWAYER CONTRACTING CO. LTD 1994 - 2001
DAMMAM K.S.A.
QA/QC SUPERVISOR / FIELD MECHANICAL ENGINEER
MOHAMMAD AL-MOJIL GROUP-DAMMAM K.S.A. 1993 – 1994
QA/QC SUPERVISOR
FRAMATOME –SPIE BATIGNOLLES 1992 – 1993
PEOPLE REPUBLIC OF CHINA
QA/QC PIPING SUPERVISOR
ABDULLAH H. AL-SHUWAYER CONTRACTING CO. LTD 1990 – 1992
DAMMAM K.S.A.
QA/QC SUPERVISOR / FIELD MECHANICAL ENGINEER
DEMAURO-SHUWAYER CONSTRUCTION CO. LTD 1982 – 1986
DAMMAM K.S.A
QA/QC ENGINEER (MECHANICAL)
JOANNOU AND PARASKEVAIDES OVERSEAS LTD. 1979 – 1981
DUBAI, UNITED ARAB EMIRATES
MAINTENANCE SUPERVISOR
Contact this candidate