About Me

Licensed Electrical Engineer (REE ******2)

Bachelor’s Degree in Electrical Engineering, University of Santo Tomas, España, Manila, 2001

Certified Electrical & Instrument QA/QC Project Inspector for Saudi Aramco Projects.

Trained in Pneumatics Industrial Control, Electro-pneumatics, Advanced Project Management & Project Risk Management Hands-on exposure in Qatar Construction Specification (QCS) Section 21, KAHRAMAA, BS EN Standards, NEC (National Electrical Code), NEMA

(National Electrical Manufactures Association), NFPA (National Fire Protection Association) and other regulatory authorities Expertise in Auto-CADD and MS Office Applications

Proven Electrical Engineering experience in construction, capable of controlling the project independently.

Profile Snapshot

Experienced in spearheading end-to-end electrical engineering projects, conducting the inspection and quality assurance activities with overall exposure in smooth site execution, MEP Works monitoring of various projects, reviewing construction drawings, providing technical input on site discipline and supervising electrical equipment & building services projects. Excellence in providing technical direction to subordinates, identifying opportunities to improve efficiency and reduce costs, implementing Company Health, Safety and Environmental Policy, procedures, regulations & objectives and recommending appropriate solution to prevent reoccurrence.

Skilled in reviewing and approving shop drawings submittal by contractor for electrical & instrument systems works; attending site technical coordination meetings to discuss contractors submissions, shop drawings, material submittals and construction related matters. Monitored construction progress including detailed shop drawings & design related to MEP’s of projects using Auto-CADD Software.

Hands-on experience in Resource Planning (manpower, equipment & material project deliverables requirement, Quality Assurance (QA) & Quality Control

(QC) of electrical & instrument installation & construction project phase, functional testing & pre-commissioning of installed electrical and instrument equipment, supervising electrical/instrument construction, site inspection & testing activities.

Skilled in Estimation Engineering activities such as preparation of Detailed Bill of Quantities (B.O.Q), Project Costing & Material take-off or Estimates, Tenders, And Large Projects Study.

Capable of doing basic and detailed engineering, sizing calculations, preparation of drawings, specifications and Data Sheets, Client approvals and technical evaluations.

Team Management: Successfully supervised, trained & managed a team of 50-80 Workers including Foreman & 3 Engineers.

Key Impact Areas

Soft Skills

Personal Details:

Date of Birth: November 25, 1978

Languages Known: Tagalog, English

Passport Details: P8240255A, 05th Aug. 2028

MMUP Accreditation: Application Submitted

Qatar ID Status: Transferrable with NOC

Marital Status: Married

Address: Bin Omran Doha, Qatar

WENDELL P. ABALOS

13+ Years of Experience

Electrical Engineer, Instrument Engineer & Electrical Inspector Electrical and Instrumentation Site & Project Engineering Project Execution & Management

Result-oriented professional, offering multi-cultural and geographical experience in large EPC Projects on Commercial & Industrial Construction, Waste Water Treatment, Sea Water Reverse Osmosis & Desalination Plant, Building Services, Onshore Oil Deck Platforms with hands-on experience in Supervision, Installation and Design, Quality Control, Testing & Commissioning in the Middle East Seeking challenging assignments as Electrical Engineer, Project Engineer, Electrical and Instrument Inspector, QA/QC Electrical Engineer in Qatar, UAE, Middle East, and East Asia Coordination

Analytical

Supervision

Team

Player

Motivator

+974-******** ac857a@r.postjobfree.com

Logical

Construction Design & Drawings

Electrical/Instrument Inspection

Installation & Assembly

Process Instruments & Racks

Supervision, Monitoring & Checks

Project Schedule & Site Progress

PTW Issuance & Approval

Method Statement & Risk Analysis

Site Inspections, Testing and

Commissioning

Awards & Recognition

Awarded as “Best Employee for the Year 2015” at Keppel Seghers Engineering for being a pivotal resource person in securing Taking Over Certificate resolving “Critical Client Issues” and pro-actively trouble shooting any issues prior to QCDD inspection Process resulting in only a 3 month inspection timeline in successfully getting the approval of Qatar Civil Defense for the safe operations and handover of the plant to Operations and Maintenance

Department of a 54 Building complex.

Quality First Consciousness Award Year 2005 At Rohm Apollo Semiconductors Philippines for outstanding performance and setting a good example to colleague by abiding company policies and targets.

Work Experience (Last 6 Companies)

Trainings & Seminars Attended

Pneumatic Industrial Control (April 14 to May 6, 2003), Meralco Foundation Institute, Ortigas Avenue, Pasig City Electro – Pneumatics (May 7 – May 23, 2003), Meralco Foundation Institute, Ortigas Avenue, Pasig City Autocadd (March 08 – April 13, 2004), Meralco Foundation Institute, Ortigas Avenue, Pasig City Ronan Radiometric Display Products ( December 1, 2010), M.H Sherbiny Service Center, Al Khobar Saudi Arabia Ronan Display Products (December 5, 2010), M.H Sherbiny Service Center, Al Khobar Saudi Arabia Advanced Project Management (March 30, 2017 to May 13, 2017), Green International, Doha, Qatar Project Risk Management (May 19, 2017 to June 07, 2017), Green International, Doha, Qatar Technical Skills

Machine Automation

Pneumatics Industrial Control

Electro-Pneumatics

Able to interpret Electrical Drawings and prepare designs of the below Electrical System: Single line Diagram for HV / MV and LV System,

Building Services (Lighting and Small Power, Earthing and Lightning Protection, Fire alarm and Fire Fighting System, HVAC/ACMV System)

Low Current System (CCTV and PA System, Security Access System, Telephone and TV System, Building Management System)

Cable Installation and Cable Termination Schedule and Drawings, Equipment Drawings Instrumentation Diagram (P& I D) drawings, Instrument Loop Diagram, Control Cable Termination Fiber Optic, PLC and RIO to SCADA Connections etc. Testing and Commissioning of Electrical Equipment, UPS System, Security Access System, CCTV System, Earthing System, Lightning Protection System, Addressable Fire Alarm System, Lighting and Emergency System Building Services System, HVAC System, BMs System, and Street Lighting Network including hands-on troubleshooting and handling various Test Equipment.

Familiar with test instruments such as Insulation Resistance (Megger) Tester, Earth resistance tester, Hi-pot tester, Multi- meter tester, Phase sequence tester, ODTR (Optical Domain Time Reflector) MTS 1000, Fiber Optic Visual Fault Locator Noise and Lux Level Tester, Fire Alarm Devices Smoke and Heat Pole Tester etc. ROHM Apollo

Semiconductor

Philippines as

Production Engineer

Electro RAK L.L.C. as

Electrical Engineer

Harouge Oil

Operation as

Electrical

Construction

Inspector

M.H Sherbiny

Industrial

Services as

Electrical

Construction

Inspector

Keppel Seghers

Engineering

Singapore as Electrical

and Instrument Site

Engineer

Acciona Agua

S.A. as Electrical

Engineer

2004-2006

2006-2009

2009-2010

2010-2011

2011-2016

Since 2016

Key Result Areas: (Last 3 Companies)

Pls. refer project details in Annexure including previous experience details Electrical Engineer

At Acciona Agua S.A. Qatar Branch (February 2016 – February 2019) Project: Putatan Water Treatment Plant 2 - (November 2017 to February 2019) Location: Putatan, Muntinlupa, Metro Manila Philippines Client: Maynilad Water Services

Project Description: The new plant is situated in Muntinlupa, in the south of the metropolitan area of Manila, next to an existing Water Treatment Plant (Putatan 1). The new plant will provide drinking water to almost 6 million people. The Plant will have a capacity of 100,000 m3 per day, extendable to 150,000 m3 per day. Project: Um Al Houl IWPP Sea Water Reverse Osmosis Desalination Plant – (November 2016 to October2017) Location: Um Al Houl, Qatar

Client: Um Al Houl Power Company

Project Description: Umm Al Houl will produce 284,000 m3 per day as part of a large-scale Independent Water & Power Project

(IWPP) that will produce around 2,500 MW of electric power and will reach 614,000 m3 per day after the start-up of the new facility. The contract covers the design, construction and later operation and maintenance of the facility. Project: RAF A3 Sea Water Reverse Osmosis Desalination Plant Project – (February 2016 to November 2016) Location: Ras Abu Fontas, Qatar

Client: KAHRAMAA - Qatar Electricity and Water Company Project Description: Ras Abu Fontas A3 will have a capacity of 164,000 cubic meters (m3) a day. The end customer for the water produced will be Qatar General Electricity & Water Corporation (KAHRAMAA). The plant constitutes a milestone in the field of desalination, as it is the first time that reverse osmosis technology will be used on a large scale in Qatar for potable water production. To date, only thermal desalination technology has been used to desalinate water. Key Result Areas:

Responsible for the design, supervision and implementation of Electrical and Instrument Construction works ensuring that works are executed in accordance with the design specifications and client requirements. Responsible for monitoring construction activities of the contractors in respect of HSE, method, working practices, quality and timely execution of the works. Ensuring assigned scope of works is carried out without any significant HSE incidents.

Oversee and inspect Electrical & instrumentation works and ensure that installation activities comply with contractual obligations and quality control standards.

Review Design Drawings and provide technical input and experiences to resolve any discipline related issues that may arise during installation works as per actual site requirements. Leads and Supervised the contractors installation and assembly of Electrical Equipment like 11KV ABB Unigear Switchgear and 11KV ABB Transformers, MV/LV ABB Variable Speed Drives 34.5 MV TAMCO Switchgear and 34.5MV Tamco Power Transformers, Automatic Transfer Switch Panels, MCC Panels, LV Switchgear, Generator Synchronizing Panel, Cummins Standby Generators, Low Voltage Distribution Boards, AEG UPS/DC System and Battery Racks, DCS Control Panels, Schneider Electric Canalis Busduct, Schneider Electric Variable Speed Drives, Schneider Electric Variable Frequency Drives, Soft Starter panels. Supervised the installation of Building Services like Lighting and Small Power, Earthing and Lightning Protection System, Cable Tray, Cable laying and termination works, Fire Alarm System, Main Street Lightings etc. Supervised and leads the installation of Instrumentation and Control System works like: PLC-RIO Panel, Valve Panels, Process Instrument’s Racks Assemblyand Process Instruments field Transmitters and sensors. Liaise or coordinate with other discipline lead engineers, contractors and draftspersons to ensure all field technical queries, issues and changes during the construction stage of the project are responded to in a timely manner. Prepare weekly look-ahead plan schedule and daily site progress report to ensure that the project is delivered on time and mitigate issues affecting the delivery of the project. Ensures that the project quality control procedures/records are being followed and implemented during the construction works and monitors it for improvement.

Attends to Work Inspection Requests (WIR's) submitted by the contractor, conducts on-site inspections of complex EI&C installations with the Client and Supervising Consultants. Address the QA/QC technical issues raised by consultant or client in the project and make the appropriate corrective actions in closing-out of comments and punch list items in a timely manner. Review the preventative actions recommended in non-conformance reports (NCR’s), initiates and verifies corrective actions to prevent reoccurrence of non-conformity. Expedite and review the preparation of ITPs, Checklists, Method Statements, Reports and procedures. Prepare/complete the necessary documentation and test reports prior to inspection of the Works and process accordingly following completion of the inspection.

Ensure the method statements are approved for all activities prior to start. Ensure the material submittals are approved on time as per the project schedules. Experience in Live Plant construction and Knowledge of LOTO / Isolations of Electrical equipment and controls. Electrical Site Engineer

At Keppel Seghers Engineering Singapore – August 2011 to February 2016 Project: Doha North Sewerage & Water Treatment Works (Design, Build (EPC) and Operate) Client: Ashgal Public Works Authority, Qatar

Project Description:This landmark project is the largest Greenfield WASTEWATER Treatment, WATER re-use and Sludge treatment plant in Qatar and the Middle East. With a peak design capacity to treat WASTEWATER of up to 439,000 cubic meters per day, Doha North STW will serve a projected population of over 900,000 (in year 2020). Key Result Areas:

P.I.C (Person-In-Charge) assigned as a focal person for Electrical, Instrument and Control Installation at, at Solid Stream Process Area with complex building structures like, Substations, Pumping Stations, Thermal Drying Plant, Lime Dosing Plant, Imported Sludge Cake Storage, Sludge Thickening and Dewatering Building, Air Blower Buildings, Aerobic Digester and SAS Balancing Tank, 14 nos. Dried Sludge Storage Buildings, Weighbridge, Septage Reception Facility, Lagoons, Storm water Tank. Etc. Leads the In-house Site Installation team of Supervisors, Foremen, technicians and Subcontractors during Project Execution of all Electrical, Instrument and Control System Works like MCC Panels, Distribution Boards, Variable Speed Drives, UPS and Battery Banks, & Electrical Devices. It includes Building services like: Lighting and Small Power, Earthing System, Lightning Protection System, Security and Access Control System, CCTV System, Building Management System (BMS), Air-conditioning and Mechanical Ventilation System (ACMV) and Addressable Fire Alarm System and Main Street Lighting works. Furthermore, it involves supervision of Instrumentation and Control works like control cabling, PLC-RIO Panels, Field Junction Boxes, Process Instrument Transmitters and Sensors, Fire Protection System etc. Manage the cable raceways installation, cable laying glanding and termination for both direct buried and above ground installations for both power and control system.

Review and approved Shop Drawings Submittal by Contractors for Electrical & Instrument Systems works. Prepare Red Line Mark Up on Drawings and verify the accuracy of subcontractors As-Built Drawings as per changes done during installation works.

Prepare Material Take-off and detailed Bill of Quantities (MTO/BOQ) needed for the timely delivery of the project. Review vendor technical and commercial quotations for E&I systems and make recommendations based upon best overall value - technical suitability, material price, installation costs and operational costs. Review contractors EI&C Material Technical Submittal to ensure project work complies with conditions and parameters set out in project scope of works before submission to consultant. Contribute to project weekly meetings with Project Director, Project Manager and all departmental Engineers to ensure site progress information and weekly look-ahead plan is communicated regularly and to resolve technical issues, HSE reviews, contractor’s submission, shop drawings, material submittals and construction related matters. Provide Technical support during construction works as a team leader coordinating with all other discipline engineers, clients’ engineers & office management.

Preparing and establishing EI&C system work schedule and forecast, project status report or Progress Monitoring. In addition to Coordination with subcontractors and vendors for timely implementation of Project deliverables. Leads the Resource planning in anticipating the Manpower, Equipment and Material deliverables requirements. Reply to RFI’s (Request for Information) from contractors to provide technical input to resolve installation related issues at site in coordination with Engineering Team and Project Construction Manager. Ensure all engineering and construction works undertaken complies with statutory and regulatory requirements and company policies and practices.

Receive material inspection requests (MIR) from contractor, inspect electrical & instrumentation materials delivered at site and report on quantity and technical compliance according to Approved Material Technical Submittal or Specification, Shop Drawing, Packing List and Country of Origin and sign off requests prior to installation at site. Interacting with Supervision Consultant and Client Representative. Conduct site inspection to ensure construction works are in conformance with project requirements such as Approved Drawing, QCS, KAHRAMAA, ITP & Method statement.

Prepare/Issued SOR/NCR for deficiencies and non-conforming of works found at site and subsequently generating reports and coordinating corrective actions responses to resolve a Non-Conformance Report (NCR). Conduct Inspection for the Installation of all Electrical & Instrumentation Equipment on assigned areas. Preparing inspection reports and site records.

Manage the Functional Testing and Testing & Commissioning of Electrical Equipment and Process Instruments, Testing of Lightning Protection and Earthing System, Insulation Resistance Test and Loop Checks (Meggering) of HV, LV, ELV Electrical Cables, Instrument & Control cables, End to end test of Fiber Optic Cable using Optical Time Domain Reflectometer (OTDR: MTS 1000) and Visual Fault Locator (Laser Light). Documentation of reports in accordance with approved Method procedures & QA/QC Standard procedures. Attends and leads Qatar Civil Defense Department Inspections & Report Preparations. Successfully Leads the Inspection and Functional Testing and Commissioning of Fire Detection and Alarm System of the whole plant in obtaining Fire & Safety Certificate from Qatar Civil Defense Department (QCDD) which works includes Integration of Cause and Effect Matrix to Other Services like: HVAC System, Standby Generators and Fuel Dump System, Fire Fighting System, Security and Access Control System, Peer to Peer Network System, 100% Fire Alarm Devices Functionality Test using Heat and Smoke Pole Tester, Mimic Panel Testing, FM200 System, Checking of Lighting System Lux/Luminous Test etc.

Experience in Live Plant construction and Knowledge of LOTO / Isolations of Electrical equipment and controls. Electrical Inspector

At MH Sherbiny Industrial Services –( July 2010 to June 2011) Project: Zuluf Deck 490/499 & Zuluf Deck 440/449 Oil Arrival Facilities Well Head Platform Client: SAUDI ARAMCO (Arabian American Oil Company) & Saipem Taqa Al Rushaid Fabricators Co. King Abdulaziz Port Dammam Kingdom of Saudi Arabia Key Result Areas:

Passed the Qualification interview and approved to be Electrical and instrument QA/QC Project Inspector for Saudi Aramco Projects.

Handle, prepare and compile all QA/QC documentations like Method Statement, Saudi Aramco Typical Inspection Plan (SATIP), Saudi Aramco Inspection Check List (SAIC), Construction Progress Report, Saudi Aramco Request for Inspection Status Report, Quality Record, Saudi Aramco Test Report, Vendor Test Report, Test Instrument Certification, and Submission of Mechanical Completion Documents prior to handover of the project to the client. Responsible for Quality Assurance and Quality Control of Electrical & Instrumentation works during Construction Phase of the project.

Leading a Group Commissioning Team Responsible for Functional Testing and Pre-commissioning of installed Electrical and Instrument Equipment for Oil Arrival Well Head Platform. like Power and Signal cables, Electrical Power Panels, Analog and Digital Marshalling Box, Electrical Equipment and Instruments which include Cable Continuity and Resistance Testing, Insulation Contact Resistance and Tripping Test of Circuit Breakers, Cold Loop Check, Hydraulic Testing of Installed Tubing for ESD Panel, Functional Testing and Pre commissioning of Switch Rack, Navigational Aid Lightings, Lighting System, Solar Panels, Industrial Switch & Receptacles, Gas Detectors, Gas Detector Panels and other equipment in preparation for Loading of Offshore Deck Facility at Sea. Submit material datasheets and samples to client consultants for review and approval. Prepare, schedule and submit Request for Inspection (RFI’s) to client consultant for inspection of completed installation works.

Liaise with Saudi Aramco Project Electrical Inspector, for the smooth and effective closing out of comments and handling over of all construction activities.

Proposed Corrective action for Non-Conformance Report (NCR) generated by project consultant. Leads a Team of QA/QC Engineer in monitoring and closing out of all the Snag List/ Punch List items and Mechanical Completion Documents required prior to handover of the project to the client. Monitoring of Electrical and Instrument works in progress and immediately notify the Site Superintendent, Site Engineer, Supervisor or Foremen of any activity that may not be in accordance with project Specifications. Professional References

Mr. Manuel Serrano

Construction Director

Acciona Agua S.A: Mobile no. +974********

Mr. Jose Francisco Garcia Jorge

Project Manager

Acciona Agua Um Al Houl Project; Mobile no. +974******** Mr. Yoong Chiat Saw

Construction Manager

Keppel Seghers Engineering Singapore Ltd.; Mobile no. +974******** Mr. Barry Titus

QA/QC Manager

Keppel Seghers Engineering Singapore Ltd.; Mobile no. +974******** Pls. refer project details in Annexure including previous experience details ANNEXURE

Previous Work Experience:

Electrical Construction Inspector

At Craddock (April 2009 – May 2010)

Harouge Oil Operation, Ras Lanuf, G.S.P.L.A.J Libya Project: Harouge Oil Operation Tank Farm Terminal Electrical MV and HV Network System, Instrument and Fire Alarm System Upgradation

Project Description: The Ras Lanuf Oil tank farm facilities are on-shore oil field production facilities or Oil Tanker Terminal in remote dessert environment plus mail pipeline and tanker terminal export facilities. Facilities includes sweet and sour crudes, natural flow and artificial lift (Pumps and Gas Lift) wells, There are 3 main pipelines connecting the oil fields with the tank farm, which consists of 13 oil storage tanks with a total nominal capacity of 6.5 million barrels of oil. Key Result Areas:

Monitors Electrical and Instrument construction activities of Harouge Oil Operations Tank Farm Terminal Upgrading of Instruments for Fire and Gas Detection System, Electrical System for L.V. /M.V. /H.V. equipment including power transmission, switchgear, transformers, Ring Main Units and Fiber Optic Network cable laying and Installation works.

Carrying out specific Site Inspection and Testing related to discipline work activities to ensure compliance to Libyan National Oil Company Standards and Project Specification Requirement. Preparation of Outstanding works and “Punch Lists” of completed works prior to hand over to Operations Department. Overseeing, checking and monitoring construction progress in order to ensure compliance with the contract specifications, drawings and industry best practices for construction with a special emphasis on construction safety. Reporting on construction progress directly to the Area Lead Construction Engineer Manager who reports to Tripoli based Project and Execution Superintendent highlighting any areas of concern with respect to HSE, quality of work or schedule. Assisting the Tripoli based project Engineering Group in development of the systems design and scope of work for miscellaneous projects to be developed and executed at site. Electrical Construction Inspector

At Electro RAK L.L.C. (October 2006 – February 2009) RAK Ceramics Group of Company (EPC)

Al Hamra, Ras Al Khaimah, U.A.E.

Company Overview: Electro RAK, is a part of the prestigious RAK Ceramics Group of companies, has established itself as the biggest and most complete MEP Solutions provider in the Northern Emirates today. The Company is a licensed FEWA contractor

(license no.262) with an ‘A’ Grade for LV and HV installations. Electro RAK provides total MEP solutions for Infrastructure, Industrial, Commercial and Residential Projects in the Northern Emirates. Assigned as Electrical Design Engineer which works involves: Experience in Preparation of Electrical Load Schedules for H.V./M.V./L.V. Electrical System which includes calculation and sizing of connected load and breakers, cables and capacitor bank which conforms with the standard and approval of Federal Electricity and Water Govt. Authority.

Preparation of Electrical Power, Lighting, Air Conditioning Layout, Cable Raceway. Fire Alarm System, Telephone and CCTV System, Load Schedules and Electrical Single Line. Diagram for H.V./M.V./L/V System of various projects using AUTOCADD Software for submittal and approval to consultant, client and Federal Electricity and Water Govt. Authority. Prepare Detailed Shop Drawings related to Mechanical, Electrical and Plumbing of projects being handled and supervised using AUTOCADD Software.

Assigned as Electrical Project Engineer which works involves: Handles and leads in Site Execution and monitoring of MEP works of various projects like: High class townhouses, Villas, High Rise Commercial and Accommodation Buildings, Shopping Malls, Industrial Plants, etc in accordance with the required quality, cost and time constraint. Planning the work and efficiently organizing the site facilities in order to meet an agreed program of deadlines.

Oversee the selection and request of materials for various projects and preparation of Material Submittal to be submitted for approval by the Client Consultant.

Managing and Leading a team of Supervisors, Foremen and Electricians in handling of MEP and ELV Installation Works. Coordinate the Preparation of detailed shop drawings and as-built drawings related to MEP works including site inspection for checking of the possibility of a good design and installation. Last held Position as a Sr. Estimation Engineer which works involves: Preparation of Detailed Bill of Quantities (B.O.Q) and Material Estimates for Electrical System, Fire Alarm System, Telephone System, CCTV System, HV/MV/LV System of prestigious projects in UAE like High Rise Commercial Buildings, Villas, Shopping Mall, Building Accommodations, HV/MV/LV works etc. based on Tender drawing and co-ordinate with relevant MEP Department regarding the status of the project estimates to be submitted to client for Tender. Preparation of project costing and estimates, tenders, and studies of large projects. Liaise with all relevant departments to gather the necessary technical, material and other information needed to use to produce the project estimates. Production Engineer

At ROHM Apollo Semiconductor Philippines Inc. (August 2004 – July 2006) Peoples Technology Complex – Special Economic Zone, Carmona, Cavite Philippines Key Result Areas:

Maintain and operate Process Machineries and Electrical Equipment which is responsible in producing quality IC chips, such as ROHM Electronics and Intel Hoop Lines.

Handles the Operation and Process of the whole production line with real enthusiasm for running an efficient process and understand what it takes to get the most out of the operational team around me and the machinery I work with making sure that the daily production target are achieved. Responsible for the Operation, Maintenance, Restoration, Preventive and Periodic maintenance, Testing and Commissioning of State of the Art Manufacturing Production Machine such as Die Bonding Machine, Wire Bonding Machine, Molding Unit, Laser Marking Machine, Taping Unit Machine and Coveyor System to prepare it for production of small transistors to maximize full potential during operation to meet the daily production target. Junior Electrical Engineer

At Fransman Enersystem Power Corporation (May 2003 – January 2004) Unit 1-1 Sunshine Condominium, 9633 Kamagong St., Makati City, Philippines Key Result Areas:

Installation, repair, testing, and commissioning of electrical devices particularly ABB products like Capacitor Bank Assembly, Electrical Distribution Board and Switchgear Assemblies, Contactors, Moulded Case Circuit Breakers, Power Factor Control Relay, Power Capacitor, etc. Leads and Supervise a Team of Electrical Technicians and workers during Project installation ensuring that the Electrical Projects are executed according to standards and safety procedures. Reports to the Electrical Manager and provide technical advice with regards to any revision and/or changes needed on the project design installation as per Site Condition and give immediate feedback on the status of the project. Preparation of Bill of Quantities, Electrical Single Line Diagram for HV / MV and LV System, Design and shop drawings of Capacitor Bank as per the System requirement to achieve unity power factor and other Electrical Projects using AUTOCADD software and submission of quotation to our customers.

Contact this candidate