Engineer Mechanical

Respected sir,

Sub: Application for the suitable post in the field of Mechanical Engineering / Quality Control I would like to introduce myself as N.PARTHIBAN I have completed my UG B.E -Mechanical Engineering from MNSK COLLEGE OF ENGINEERING AND TECHNOLOGY (ANNA UNIVERSITY AFFILATED COLLEGE)during the period of 2008-2011and I have scored of 67.0%percentage in overall subjects. I will exhibit all the best in me for your esteemed organization. I also assure maximum output with best of my ability, for the improvement of your organization with best of my qualification acquired in the past. And i also want to add info that I have learned designing software like Auto- CAD & PRO-E to enrich my design knowledge. Hope that you may consider my application for any suitable post.

Enclosure- Resume of N.PARTHIBAN .B.E

Thanking you in anticipation with an early response from you. With Best Regards,

[PARTHIBAN.N]

N.PARTHIBAN,

No: L-126, POONGA NAGAR,

RAJAGOPALAPURAM,(POST)

PUDUKKOTTAI-622003,

TAMIL NADU

INDIA.

E-mail: ac82ri@r.postjobfree.com,ac82ri@r.postjobfree.com

Mobile No:

SAUDI NO +966*********

INDIA NO +919*********

Intend to work in a creative and challenging environment using cutting edge technologies where I could constantly learn and enrich my knowledge. To seek challenging assignment and responsibility, with an opportunity for growth and career advancement Bachelor of Engineering in Mechanical Engineering- at 67%. Higher Secondary with an aggregate of 55 %

Secondary School Leaving Certificate with an aggregate of 69 % CSWIP-3.1 (CERT NO 316762)

ASNT LEVEL II CERTIFICATE IN - RT /UT/ DPT/ MPT/ VT AUTO CAD2008 IN CADD.

PRO-E 2008 - BASIC

Saudi Aramco Approval Reference # OMP Projects ABQQ/ANDR/SDGM/FZRN. Control no: 1287/2016 (UNDER CONTRACT NO 660*******)

Saudi Aramco Approval Reference # OMP Projects ABQQ/ANDR/SDGM/FZRN. Control no: 2018/0622 (UNDER CONTRACT NO 660*******)

Project - Saudi Aramco Onshore maintain potential project.KSA Organization: - Nesma & Partners Saudi Arabia KSA

Employment History / Experience

Designation: -

Duration: - 2018, to Present

Project - Saudi Aramco Onshore maintain potential project.KSA Organization: - Br CAT International Co Ltd Saudi Arabia KSA Designation: - Mechanical-Piping Inspector

Duration: - July:2015 to July 2017

Project: - Bharat Heavy Electrical Limited, Trichy INDIA Organization: - Wire and Wire Products, Trichy,

Designation: - INSPECTION ENGINEER.

Duration: - September 2014 to May 2015

Project: - Bharat Heavy Electrical Limited, Trichy INDIA Organization: - Velmurugan Heavy Engineering,Trichy, Designation: - QC INSPECTOR.

Duration: - July 01,2011 to july,2014.

Saudi Aramco Onshore maintain potentia

1) ORGANIZATION - Nesma & Partners.

POSITION - Mechanical-Piping Inspector

2) ORGANIZATION -Br.C.A.T INTERNATIONAL

POSITION - Mechanical-Piping Inspector

Piping Responsibilities

Review and Implementation of Method Statement (MS), Inspection Testing Plan

(ITP)

Responsible for Incoming material inspection & correlating with the mill test certificate, dimensional checks, condition of materials, documenting & reporting of non-conformity (if any) to specification & preparation of MIR as per MTO and OUTBOUND.

Inspection and Testing of Mechanical Construction Activities like Fit-up inspection to make sure the dimensions, rollings and material grades as required in particular section as per LINE CLASS, are as per approved ISOMETRIC drawing latest revision.

Attending site RFI Inspection with Client and TPI. Maintaining RFI record after the Inspection.

Preparation of as built Drawings, other related documents SPOOL RELEASING activity from fabrication shop after completion of a spool as per the ISOMETRIC DRAWING.

Hydro test Package preparation and review hydro test package to ensure that the NDT summary, weld summary, weld map, support drawing, valve list, latest approved drawing duly marked the test limits, P &Id marked with test boundaries, check list, and all the related documents are attached in the test package. Conducting hydro test for valves as per the ALLOWED PRESSURE. To inspect VALVE storage after conducting HYDRO TEST Materials proper preservation and stacking to avoid any damage. Stacking of SS and CS material in separate area.

To conduct TOOLBOX meeting for proper preservation of materials while handling, storage and shipping.

To conduct bending activity as per surveyor report. To inspect during pipe stringing.

To witness PMI inspection.

To conduct BOLT TORQUING activity.

Conducting PNEUMATIC TEST for WEAR PADS,CAMEL CROSSING SPOOLS and ANCHORS.

To conduct PRESSURE GAUGE calibration activity.

To cover the punch list activities before hydrotest and after hydro test. Coordination with client to resolve the issues related to Test Package. Conducting HYDRO TEST for both above ground and under ground line as per pressure in hydrostatic drawing.

Co-ordination with pre-commissioning activities

To conduct cleaning activity for pipes for hydrotest with any approved methods. Inspection the joint with client inspector in leak and strength testing of piping system during hydro test..

Ensuring no pressure deviation after starting hydro test. Have good experience to prepare punch list for TEST PACKS by walk through of piping.

Monitor project package documentation, prior to handing over to the client. Final documentation, closing of punchlist and hand over. 1. ORGANIZATION - Velmurugan Heavy Engineering,Trichy,, Trichy POSITION - QC INSPECTOR

2. ORGANIZATION - Wire and Wire Products, Trichy

POSITION - INSPECTION ENGINEER

(BHEL subcontract company)

Raw Material Inspection Review of Test certificates with respect to Standards

& P.O

Arranging the NDT inspection for plates before fabrication. Review the Isometric drawing.

Review the calibration certificates of inspection tools Check the incoming materials-size, types, conditions and defects Check the method of Fabrication

In Process Inspections of all the activities regarding Non Pressure Parts ( Columns, Beams)

Before welding, performing proper Fit up inspection for Root Gap, Root Angle, Root Face, Groove Angle.

Observe the everyday working status

Check the lay out setting before the work starts

Giving instruction to the worker as per the procedure Releasing the weld joint for NDT Test after visual Inspection. Arranging the NDT of finished weld as per specifications Prepare daily NDT inspection reports (RT, MPT, and LPT). Witnessing the NDT(LPT,MPT) activities and analyze the reports Co-ordination with BHEL Inspector

Maintaining all related files and records

Ms-Word, Ms-Power Point, Ms-Excel

Windows98/2000, 2007

NAME N.PARTHIBAN.

- C.NATARAJAN.

PERMANENT ADDRESS L-126,POONGA NAGAR,

RAJAGOPALAPURAM (POST),

PUDUKKOTTAI-622003,

TAMIL NADU,

INDIA.

LANGUAGES KNOWN- TAMIL AND ENGLISH.

Passport no: J2902661

Date of issue: 05/08/2011

Date of expiry: 04/08/2021

Place of issue: Trichy,Tamilnadu

India

I hereby declare that the particulars of information and facts stated herein above are true, correct and complete to the best of my knowledge and belief. Place: Signature

Date: ( N.PARTHIBAN)

Contact this candidate