Master electrician place specialist
Resume:
Dyke, VA *****
Phone Number: 817-***-****
EmailAddress:*********@*****.***
Brandon M. Jones
Experience
**/** - ******* *.*. Breeden Elkton, VA
Unlicensed Master Industrial PLC Specialist
Worked on AC and DC drives, protective relays, switchgear, MCC's, motors and terminations, wire and cable applications, raceways, transformers, panels, PLC components and power supplies.
Interpretted blueprints, circuit diagrams and schematics and manuals.
Assisted in diagnostics, repairs and rebuilds of machines; partnered with engineering and IT or others on non-routine repairs.
Utilized root cause analysis thought process to ensure sustainability of corrective actions and improvements to drive asset reliability.
Calibrated different machines and instruments.
Installed control and measurement instruments on new or existing equipment.
Implemented all safety regulations according to government and company standards.
Proficient with Rockwell programming software and hardware including Logix5000 and HMI.
Installed and maintained wiring, control, and lighting systems.
Completed preventative maintenance on electrical and mechanical components such as transformers and other reliability tasks.
Conducted job walks, cost/time needed to preform tasks.
Purchased, gathered and staged materials for different projects assigned.
Identified and delegated tasks to team members depending on priorities and their strengths.
Supervised and provided direction to crew members in the execution of projects and major repairs to equipment.
Understood the construction process from design, submittal review, construction and asbuilts.
Ensured that all paperwork was filled out in a clear, legible and accurate format and completed with all required information.
Attended and implemented all required training.
Utilized the continuous improvement meetings to identify and correct opportunities, improve processes including participation in the creation and documentation of SOPs and Work Instructions, and creation and maintenance of preventative maintenance standards.
2/17 - 9/17 Michael and Son Services Charlottesville, VA
Residential/Commercial Electrical Technician
Read blueprints or technical diagrams.
Installed and maintained wiring, control, and lighting systems.
Inspected electrical components, such as transformers and circuit breakers.
Identified electrical problems with a variety of testing devices.
Repaired or replaced wiring, equipment, or fixtures using hand tools and power tools.
Followed state and local building regulations based on the National Electric Code.
Directed and trained workers to install, maintain, or repair electrical wiring or equipment.
8/16 - 1/17 Patton Electric Cleburne, TX
Lead Industrial Instrumentation and Control Technician
Consulted manuals, read and interpretted blueprints, circuit diagrams and schematics.
Inspected and tested the operation of instruments and systems to diagnose the faults using test devices.
Repaired and adjusted system components.
Removed and replaced defective parts as needed.
Calibrated components and instruments.
Installed control and measurement instruments on new or existing equipment.
Observed safety regulations according to government and company standards.
Configured and programmed Programmable Logic Controls (PLC) and Programmable Automation Controllers (PAC).
Performed PLC installations & troubleshooting.
Proficient with Rockwell programming software and hardware including logix5000 and HMI.
Rendered assistance in regulating duties of the junior technicians.
Supervised and taught junior apprentices.
Used SAP to write up work to do corrective maintenance, generate work orders to close out completed jobs.
Conducted job walks, cost/time needed to preform tasks.
Gathered and staged materials for different assignments.
7/11 – 8/16 Lhoist North America Clifton, TX
Lead Industrial Maintenance Electrician and Control Technician
Software used Allen Bradley, SquareD.
Mechanical operations such as hydraulics and pneumatics.
Knowledge in preventative maintenance and safety techniques
Maintained the industrial machinery from diagnosing, testing and replacing malfunctioned systems and repairing them as needed.
Performed PLC installations & troubleshooting.
Proficient with Rockwell programming software and hardware including logix5000 and HMI.
Troubleshooting using blueprints, schematics, computer and appropriate test equipment.
Installed 3 phase equipment 480V motors, 4160 high voltage terminations with heat and cold shrink, MCC buckets and PDC.
Terminated controls 110V AC and 24V DC (MCC & field devices).
Assisted mechanics in their daily duties as needed.
Ability to drive forklifts, lull (extendaboom), backhoes, manlifts and scissor lifts.
Ability to weld using mig welding, stick welding and wire feed.
Rendered assistance in regulating duties of the junior technicians.
Interacted well with superiors and subordinates.
10/09 – 7/11 Patton Electric Cleburne, TX
Industrial Electrical Journeyman/Foreman
Trained apprentices & helpers to perform electrical installations.
Trained helpers & apprentices on PLC controls.
Maintained the electrical systems after installation.
Performed PLC installations & troubleshooting.
Installed 480V motors & MCC buckets.
Proficient with Rockwell programming software and hardware including logix5000 and HMI.
Terminated controls (MCC & field devices).
Assisted in startups of new installations.
Supervised other journeymen & apprentices.
Conducted job walks, cost/time needed to preform tasks.
Gathered and staged materials for different assignments.
Used SAP to write up work to do corrective maintenance, generate work orders to close out completed jobs.
Delegated tasks to crew depending on priority.
Arranged meetings with production managers and maintenance managers.
5/09 – 10/09 Wallace Electric Meridian, TX
Industrial/ Commercial Electrical Journeyman/Foreman
Performed commercial electrical installations for water treatment plants.
Responsible of supervising some helpers.
Designed layouts.
Ran conduit.
Pulled wires.
Terminated low and high voltage systems.
Maintained some lift stations for the city.
2/09 – 5/09 JCH Electrical Dallas, TX
Commercial Electrical Journeyman/Foreman
Performed commercial electrical basic circuit wiring.
Pulled & terminated MC cables.
Ran conduit.
Terminated low & high voltage systems.
Responsible of supervising a crew of helpers & apprentices.
8/08 – 12/08 Lauren Industries Abilene, TX
Industrial Electrical Journeyman
Worked on a power house.
Ran conduit.
Pulled wires.
Terminated low & high voltage systems.
2/08 – 8/08 R & S Fabrications Blum, TX
Head of Electrical Maintenance Department
Designed electrical layouts.
Interpreted electrical drawings.
Performed electrical maintenance on machinery.
Ran conduit.
Pulled wires.
Ran pipes.
Terminated 480V, 120V & 3 phase systems.
11/07 – 11/08 Patton Electric Cleburne, TX
Industrial Control Technician & PLC Specialist
Built PLC control cabinets & MCC motor buckets.
Worked on PLC, MCC & VFD troubleshooting.
Ran conduit.
Designed the hookups & layouts.
Pulled wires.
Terminated 480V & 120V systems.
11/06 – 11/07 James Hardie Cleburne, TX
Industrial Electrical Maintenance Technician
Performed electrical maintenance in an industrial manufacturing environment.
Worked on the computers that controlled the line.
Installed devices.
Worked on PLC, MCC & VFD troubleshooting.
Worked on motor control centers, VFDs & 4160 switch gears.
Maintained 480V systems.
Worked on configuration & calibrations of instruments/transmitters.
8/99 – 11/06 Patton Electric Cleburne, TX
Industrial Electrical Journeyman
Trained helpers & apprentices to run pipe, pull wire, low & high voltage terminations, welding & control work on field devices & PLCs (both remote & main).
Supervised helpers & apprentices.
Performed industrial electrical installations for plants & factories.
Ran conduit & conduit layouts.
Pulled wires.
Worked on control circuitry.
Terminated 480V & 120V systems.
5/99 – 8/99 Amber Electric Dallas, TX
Unlicensed Industrial Journeyman
Performed commercial electrical installations for medical centers & hospitals.
Ran EMT.
Pulled wires.
Terminated receptacles.
Hung lights.
Terminated lights and switches.
8/98 – 5/99 Casey Industrial Denver, CO
Industrial Electrical Apprentice/Helper
Performed industrial electrical installations for factories.
Worked on piping & wiring of 3 phase, VAC motors & motor control centers.
Worked on piping and terminating control devices.
Worked on cable preparation & HV terminations (Stress Cones).
Operated backhoes, ditch witches & forklifts.
Worked with NEC.
Installed electrical conduit, cable trays & raceways.
Installed medium & high voltage conductors under 600V.
3/98 – 8/98 ITC Fiber Optics Albuquerque, NM
Industrial Electrical Apprentice
Ran conduit.
Pulled wires
Pulled & terminated low & high voltage cables.
Worked on phone systems & communications.
9/96 – 2/98 Casey Industrial Denver, CO
Industrial Electrical Apprentice/Helper
Performed industrial electrical installations.
Worked on piping & wiring of 3 phase, VAC motors & motor control centers.
Worked on piping and terminating control devices.
Worked on cable preparation & HV terminations (Stress Cones).
Operated backhoes, ditch witches & forklifts.
Pulled pipes.
Ran wires.
Welded steel supports for pipes and electrical boxes.
Hung trays for cables.
6/94 – 9/96 Bosk Enterprises Denver, CO Industrial Electrical Apprentice/Helper
Performed industrial electrical installations.
Worked on piping & wiring of 3 phase, VAC motors & motor control centers.
Worked on piping and terminating control devices.
Worked on cable preparations & HV terminations (Stress Cones).
Operated backhoes ditch witches & forklifts.
Education
Days Creek High School Days Creek, OR
High School Diploma
Licenses
Journeymen’s Electrical License # 00071600
Issued 9/2004 in the State of Texas.
Contact this candidate