mechanical, welding 3g, building electrician, plumbing, pipe fitter
Resume:
FERDINAND A. AFALLA
Oil Clinic, Tripoli Libya
Mobile No. +218*********
Email Address:
*****************@*****.***
*************@*****.***
OBJECTIVES:
To secure a position in your company that offers challenge and opportunity for my career development and at the same time serve the company to the best of my capabilities. I would like to gain new skills while utilizing my current area of expertise of procurement and employee satisfaction services within a positive team environment.
WORK EXPERIENCES:
POSITION: MECHANICAL TECHNICIAN (TURBINE MAINTENANCE)
COMPANY: ALMAS ALABIAD/BONATTI
(GREEN STREAM, MELLITAH COMPLEX ZUARA LIBYA)
DURATION: JANUARY 23, 2016 up to present
DUTIES AND RESPONSIBIITIES
• Uses facility operating procedures and equipment technical manuals to operate, maintain and repair facility equipment and ensure equipment is operated within acceptable parameters.
• Maintains equipment by tightening fittings, replacing valve packing, gaskets, valves, gauges, etc. and cleaning, replacing, oiling and lubricating other component parts and equipment, blinding and diblindings as required.
• Opens and closes valves as required for proper system operation and mechanical isolation
• Performs capital project and/or major program responsibilities as assigned by Plant Management.
• Sets up and operates various tools and instruments to repair parts and equipment. Operates welding and cutting equipment.
•Repair, replace, dismantle and examine defective parts along with lubricating and cleaning parts.
• Assist in troubleshooting and inspecting programmable logic controllers
• Assist with repairs of plant equipment.
• Reads, understands and complies with all regulatory procedures and facility safety programs. Assists compliance of all plant environmental permits.
. • Performs general housekeeping and continuous improvement of the facility. Maintains the cleanliness of all areas of the plant
• Demonstrates knowledge of all facets of power plant operations.
• Demonstrate good verbal and written communication skills
• Ability to do walking, reaching, climbing, and stooping and lifting (up to 75 pounds), perform good housekeeping
POSITION: MECHANICAL TECHNICIAN (OFF SHORE)
COMPANY: DIETSMANN LIBYA (SABRATHA PLATFORM MELLITAH LIBYA)
DURATION: AUGUST 23, 2014 – DEC 2015
DUTIES AND RESPONSIBILITIES:
• Uses facility operating procedures and equipment technical manuals to operate, maintain and repair facility equipment and ensure equipment is operated within acceptable parameters.
• Maintains equipment by tightening fittings, replacing valve packing, gaskets, valves, gauges, etc. and cleaning, replacing, oiling and lubricating other component parts and equipment, blinding and diblindings as required.
• Opens and closes valves as required for proper system operation and mechanical isolation
• Performs capital project and/or major program responsibilities as assigned by Plant Management.
• Sets up and operates various tools and instruments to repair parts and equipment. Operates welding and cutting equipment.
• Diagnoses cause of mechanical malfunction or failure of operational equipment. Repair, replace, dismantle and examine defective parts along with lubricating and cleaning parts.
• Assist in troubleshooting and inspecting programmable logic controllers
• Assist with repairs of plant equipment.
• Reads, understands and complies with all regulatory procedures and facility safety programs. Assists with compliance of all plant environmental permits.
. • Performs general housekeeping and continuous improvement of the facility. Maintains the cleanliness of all areas of the plant
• Demonstrates knowledge of all facets of power plant operations.
• Demonstrates the ability to make competent decisions in emergency situations
• Demonstrate good verbal and written communication skills
• Ability to do walking, reaching, climbing, and stooping and lifting (up to 75 pounds), perform good housekeeping
POSITION: ELECTRICAL TECHNICIAN
COMPANY: CRADDOCK LIBYA (WAHA OIL GIALO 59 LIBYA)
DURATION: MARCH 2013 – JUNE 19 2013
DUTIES AND RESPONSIBILITIES
• Provide preventive and predictive maintenance of the electrical systems, conducting daily rounds and readings;
• Lead successful installation and repair of electrical systems and wiring including but not limited to: power distribution systems, LED lighting systems, control panels, components of machinery and equipment, security camera infrastructure;
• Complete daily work orders as assigned and update team with daily work reports outlining progress and new issues;
• Develop and maintain inventories of electrical materials;
• Perform maintenance job functions as needed, including but not limited to basic repairs to High Line MEP infrastructure, furnishings, and utilities;
• Model, implement, and comply with electrical safety rules and related industry regulations;
• Define and follow Standard Operating Procedures for repair of electrical systems;
• Perform other duties as assigned, perform good housekeeping.
POSITION: MECHANICAL TECHNICIAN
COMPANY: AHEM FOR OIL AND GAS (MELLITAH ELWAFA LIBYA)
DURATION: SEP.2012- FEB. 2013
DUTIES AND RESPONSIBILITIES:
• Uses facility operating procedures and equipment technical manuals to operate, maintain and repair facility equipment and ensure equipment is operated within acceptable parameters.
• Maintains equipment by tightening fittings, replacing valve packing, gaskets, valves, gauges, etc. and cleaning, replacing, oiling and lubricating other component parts and equipment, blinding and diblindings as required.
• Opens and closes valves as required for proper system operation and mechanical isolation
• Performs capital project and/or major program responsibilities as assigned by Plant Management.
• Sets up and operates various tools and instruments to repair parts and equipment. Operates welding and cutting equipment.
• Diagnoses cause of mechanical malfunction or failure of operational equipment. Repair, replace, dismantle and examine defective parts along with lubricating and cleaning parts.
• Assist in troubleshooting and inspecting programmable logic controllers
• Assist with repairs of plant equipment.
• Reads, understands and complies with all regulatory procedures and facility safety programs. Assists with compliance of all plant environmental permits.
. • Performs general housekeeping and continuous improvement of the facility. Maintains the cleanliness of all areas of the plant
• Demonstrates knowledge of all facets of power plant operations.
• Demonstrates the ability to make competent decisions in emergency situations
• Demonstrate good verbal and written communication skills
• Ability to do walking, reaching, climbing, and stooping and lifting (up to 75 pounds), perform good housekeeping
POSITION: PLUMBER/PIPE FITTER
COMPANY: JABEL OIL SERVICES (WAHA OIL AL SIDRA LIBYA)
DURATION: AUG.12 2011 – AUG.2012
DUTIES AND RESPONSIBILITIES
• Removes stagnant water from lift stations and pump houses using pumps and vacuums to remove solid waste and sludge ;
•Performs preventive maintenance such as lubricating and testing, adjusting pulleys, or tightening tension belts;
• Flushes hydrants and reservoirs, and exercises valves to remove debris and raise chlorine residuals ;
• Regularly uses all of the hand and power tools and equipment of the plumbing-pipefitting trade including wrenches, drills, saws, levels, measuring tapes, grinders, torch sets, shovels, picks, leak detectors, pipe cutters and threaders, hand tachometers, hydraulic valve turners, flow and pressure gauges, and water sampling devices;
• Occasionally uses groove machines, jackhammers and cut saws. Paints pump rooms, as assigned;
• Helps lead the work of lower grade worker(s), as assigned provides the assistance or instruction deemed necessary;
• Drives a pick-up truck airside and landside and to various locales for assignments;
•maintain good housekeeping.
POSITION: ELECTRICAL TECHNICIAN
COMPANY: AL TAHADI ALHANDASI FOR OIL SERVICES
(LIFECO MARSHA EL BREGA LIBYA)
DURATION: JULY 31 2010 – OCTOBER 2010
DUTIES AND RESPONSIBILITIES
• Provide preventive and predictive maintenance of the electrical systems, conducting daily rounds and readings;
• Lead successful installation and repair of electrical systems and wiring including but not limited to: power distribution systems, LED lighting systems, control panels, components of machinery and equipment, security camera infrastructure;
• Train others on the Maintenance team in the execution of basic electrical tasks;
• Complete daily work orders as assigned and update team with daily work reports outlining progress and new issues;
• Identify when external contractor/vendor is needed, and work in collaboration with contractor/vendor to complete work;
• Develop and maintain inventories of electrical materials;
• Perform maintenance job functions as needed, including but not limited to basic repairs to High Line MEP infrastructure, furnishings, and utilities;
• Model, implement, and comply with electrical safety rules and related industry regulations;
• Define and follow Standard Operating Procedures for repair of electrical systems;
• Identify and suggest new approaches or best known methods to foster continuous improvement;
• Perform other duties as assigned, perform good housekeeping.
POSITION: GENERAL MAINTENANCE/ BOWLING TECHNICIAN
COMPANY: GREEN VALLEY HOTEL AND RESORT (DONTOGAN BAGUIO CITY PHILIPPINES)
DURATION: JANUARY 15, 2008 – JANUARY 31, 2009
DUTIES AND RESPONSIBILITIES
• Complete daily work orders as assigned and update team with daily work reports outlining progress and new issues.
•performing welding works, carpentry, plumbing, electrical repair and any painting jobs given;
•implement and complying with the company policy and safety standard procedures.
•maintaining good housekeeping of the facilities.
OTHER SKILLS:
1.Structural welder
2.Painter/sand bluster
3.Carpenter
TRAININGS:
SAFETY OFFICER (ON THE JOB TRAINING)
COMPANY: RS AWINGAN DESIGN AND DEVELOPMENT (TALOY TUBA BENGUET PHILIPPINES)
DURATION: SEP. 01, 2017 – OCT. 05, 2017
EDUCATIONAL BACKGROUND:
COLLEGE: (VOCATIONAL)
SAFETY OFFECER (RODECH TRAINING LINK INTERNATIONAL INC.)
RM.309 GUADALUPE COMMERCIAL COMPLEX, EDSA GUADALUPE,
MAKATI CITY, PHILIPPINES
AUGUST – SEPTEMBER 2017
BUILDING WIRING ELECTRICIAN (BENGUET LIVELIHOOD TRAINING AND PRODUCTIVITY CENTER) (BLTPC) LA TRINIDAD, BENGUET PHILIPPINES.
JUNE-OCTOBER 2006
SECONDARY:
BAGUIO CITY NATIONAL HIGH SCHOOL (ROXAS ANNEX) (BCNHS) BAGUIO CITY, PHILIPPINES
2001 TO 2005
BIOGRAPHY:
Birth date SEPTEMBER 11, 1987
Age 30
Nationality Filipino
Height 5’4”
Weight 62 kgs
Passport No:
Date of Issue:
Exp. Date:
CHARACTER REFERENCES:
MR.GIOVANNI PUDDU
TEAM LEADER DIETSMANN, LIBYA
(SABRATHA PLATFORM)
MR. GINO/ ADRIAN
STATIC COORDINATOR DIETSMAN, LIBYA
(WAFA FIELD)
MR. LB SCOTT
SITE MANAGER CRODDUCK ENGR. LIBYA
(JALO 59,LIBYA)
JOSELITO C. PEDREZA
SAFETY CONSULTANT
BWC-DOLE no.1030-021717-0048
*********@*****.***
ARCH. RYAN ACE S. AWINGAN
PRINCIPAL ARCHITECT
RS AWINGAN DESIGN AND DEVELOPMENT
**********@*****.*** / *******@*****.***
Contact this candidate