ARUNMOZHI.N
E-Mail: ac7xwi@r.postjobfree.com
Mobile & Whatsapp: +919*********
Skype ID: arunmozhin48
PASSPORT NO: KO587256 (INDIAN)
To seek out a challenging opportunity as a Welding Inspector to utilize my skills and knowledge and to be an part of an organization where creativity, hard work and sincerity are recognized and well rewarded.
SUMMARY:
KNPC PMC (AMEC Foster Wheeler) Approved Welding Inspector with total 6 Years experienced in Construction, Revamping and shutdown projects of Piping, Welding and NDT.
AREAS OF EXPOSURE:
WPS and PQR as per ASME Section IX.
Conducting WQT and qualification as per ASME Section IX
Inspecting fit up and welding as per ASME B31.3
Monitoring welding as per proper WPS.
Monitoring welding consumables, storage and usage as per project specification.
Knowledge in materials as per ASME section II – A
Tie In and Hot Tapping welding activities
Familiar with SHELL DEP 31.38.01.31-Gen, SHELL DEP 31.38.01.11-Gen
Conversant to various international standards such ASME B31.3, B16.5, B16.47, B16.11, B16.9, API 598
Familiar with welding consumables as per ASME section II – C.
Familiar with PWHT, PMI and Hardness etc
Familiar with HYDRO TEST Pack, NFI, NCR.
Inspection of above and underground piping.
Knowledge about safety requirements.
MATERIALS HANDLED:
CS (Seamless and seam pipes), SS, Heavy wall and Small Bore Alloy Steel (P11), LTCS and cement lined piping
ACADEMIC QUALIFICATION:
B.E ( Mechanical Engineering ) from Erode Sengunthar Engineering college, Erode, Tamilnadu, India in the year 2012 with CGPA 7.99
CERTIFICATION COMPLETED:
ASNT NDT LEVEL-2(MPI,UT,RT,PT) in NDE inspections, Trichy, India – Valid up to 14.10.2020
CSWIP- 3.1 Certified Welding Inspector Level- 2 (Cert. No. 696474) – Valid up to 12.04.2021
Certified Welding Inspector Coarse in WRI, BHEL, Trichy
PROFESSIONAL EXPERIENCE:
1)Worked as welding and Piping Inspector in Yuhantech Co. WLL ( AL Kulaib ) – Subcontractor for JGSK ( Joint venture of GS, SK and JGC ) in Clean Fuels Project, Mina Al Ahmadi (KNPC) Refinery from Dec 2017 to Nov 2018
JOB RESPOSIBILITIES:
Review of WPS and PQR as per project specification
Familiar with MT, PT and RT film interpretation
To follow all quality control procedure, inspection and test plan
Checking joint fit-up & Monitoring and controlling welding consumables
Familiar with welding inspections that is before, during and after welding activities at site
Reviewing filler wires and electrodes of welding procedure specification
Qualification and performance monitoring of welding personnel
Supervision and inspection Welding, Pre-heat and Post Weld Heat Treatment of weld
Witnessing Hot Tap and Tie In welding activities
Development and implementation of inspection checklist and report/format
Responsible for alloy metal verification
Reviewing final Packages for Hydro tests, approving & releasing for Hydro test
Preparing the punch list items as per P & ID and Isometric such as, Pipe supports, Valves, Guides, Hot and cold supports and NDT completion and approving/ releasing packages for hydrotest.
Monitoring of various welding process like GMAW, GTAW, SMAW
TURNAROUND AND SHUTDOWN EXPERIENCE:
2)Worked as welding Inspector in Bisco Integrated Services for Yansab shutdown – Yansab – A SABIC Affiliate (April 2017 to May 2017)
3)Worked as a Welding Inspector in Bureau Veritas, Qatar for Qatar chemical company shutdown project from (Nov 2016 to March 2017) – Pre shutdown, Shutdown and Post shutdown activities
4)Worked as a Equipment Reliability Technician in TA2015 in QATAR chemical company (QCHEM 2 plant Shutdown) from(Jan 2015 to Feb 2015) through QCON
JOB RESPOSIBILITIES:
Carrying out turnaround Piping cut and weld jobs inspection activities such as fit-up, visual inspection and NDT witnessing as per Standards & Conversant to P&ID/Isometrics
Checking welding parameters and verify compliance with approved Welding Procedure Specifications (WPS)
Handled expansion joint header line repair activities (supports)
Surveillance inspection in the store for ensuring the storage system of welding consumables
Reviewing job packs and cold work inspection such as gasket replacement, bolt & nut replacement and valve replacement
Witnessing Hydro testing and Pneumatic testing of piping system and reinforcement pads
Witnessing final DFT as per SABIC painting standard
Monitoring Preheat and interpass temperature as per WPS using Temperature Gun
Line checking, review of isometric drawing and control sheets, field walk down and Release of test packages for pressure test
Daily welding inspection activities report preparation for shift hand over meeting
Verification of electrodes baking and holding temperature including control and issue (Tracking sheet) and Reviewing PWHT Reports
5)Worked as a QC Inspector in ESL Industrial Suppliers, Trichy, India during (May”16 to Oct “16)
JOB RESPOSIBILITIES:
Witnessed Liquid Dye Penetrant test on Gate valves (Body, Plug, & Cover), Magnetic Particle test on Gate Valves and Witnessed hydro testing of valves (Gate valves)
Reviewing WPS/PQR and witnessing welder qualification for various clients
6)Worked as Equipment reliability technician in a MICE Piping inspection project, PSI as built isometric update and general QA/QC activities in Qatar chemical company, Qatar through QCON during (March 2015 to Feb 2016)
JOB RESPOSIBILITIES:
As built Review of Merged Piping Isometric and New TML marking with site verification
Responsible for inspection of pipe spools for shop and fabrication such as fit-up, dimensional and visual inspection as per Standards & Conversant to P&ID/Isometrics
Witnessing and inspection of Tie-in welding activities & NDT report Verification
Reviewing WPS/PQR of various processes as per ASME. Sec. IX
Witnessing hydrotest in workshop for valves and spool fabrication
Updating the inspection reports for piping circuits, valves, CP and Equipments and raising recommendations if any in SAP through Meridium inspection software
Updating the Inspection status of piping circuits and PRDs in excel sheet in Meridium Inspection software
7)From 14TH JUNE 2012 TO 29TH Nov 2014 worked in Arsom Cnc Private Limited, Bangalore, India (customer of GE Triveni turbines limited)- a leading manufacturers of welded diaphragm and an ISO certified company as a QA/QC Inspector in welding & Fabrication division and Machine shop.
JOB RESPOSIBILITIES:
Inspecting Raw materials such as Plates, Forged Rings, Steel Bars, Fasteners and Welding consumables as per ASME. Sec. II through raw material inspection procedure & TDC, providing color coding and verifying the material test certificate
Ensuring welding carried out as per the approved WPS
Carrying out stage inspection as per approved ITP
Dimensional checking, fit-up and weld visual examination as per drawing requirements
Verification of pre heat temperature and inter pass temperature as per approved WPS
Maintaining records like calibration records, ITP, Quality manual, work instructions, ISO Documents, mandatory procedures and actively participated in ISO Audit works
Monitoring correct welding consumable usage and storage as per ASME. Sec. II
Checking the Mill test certificate, NDT, Stress Relieving and material testing reports from vendors
Conducting DPT and Witnessing NDT
Attending shop floor issues and initiating action on non conformities (NCR)
Monitor safety measures and safety practices to ensure accident free working environment in welding and machine shop to improve safety and productivity
PERSONAL DETAILS:
Date of birth: 11.05.1991
Languages known: Tamil, English, Kannada, Hindi
Address: No: 31/4, income tax office road, Sekkalai, karaikudi, Tamilnadu, India.
DECLARATION:
I hereby declare that the information furnished above is true to the best of my knowledge.
DATE:
PLACE: (N.ARUNMOZHI)