JULES M. SALTING

RECE : *****

B-** L-** Ph-* Natividad Subd. Deparo Caloocan City

Mobile No. 091********, 099********

Email add:ac7u56@r.postjobfree.com

Skype: julesgadgets

Yahoo Messenger: salting_jules

Objective:To significantly contribute my knowledge and experience in successfully fulfilling assigned tasks and responsibilities through high regard for work quality and unparallel dedication and professionalism for the further advancement and growth of the company.

Special Skills:

Supervisory & Leadership Skilled

Can manage to repair with or without supervision especially Electrical, Electronics,Computer& Mechanical Systems.

Knowledge in Microsoft Office (Word, Excel, Outlook,Powerpoint,

Knowledge of quality management system.

Driving two wheels & and 4 wheels vehicle.

Educational Background:

College:1991-1996 Technological Institute of the Phils.

938 Aurora Blvd.Cubao Q.C.

Course: BS Electronics &Communication Engineering

Vocational: 1988-1991 Asian College of Science and Technology

Aurora Blvd Cubao, Quezon City

Course: Electronics Technician

High School: 1984-1988 Manaoag National High School

Manaoag, Pangsasinan

Course Secondary

Personal Information:

Father’s Name: Alejandro C. Salting

Mother’s Name Nieves M. Salting

Place of Birth: Manaoag, Pangasinan

Date of Birth: April 15, 1972

Civil Status: Married

Religion: Christian (Born Again)

Citizenship: Filipino

Height: 5’ 7”/ 1.70Meters

Weight 134 lbs./60.78kilos

Sex/Gender: Male

Name of Spouse: Lina O. Salting

Name of Children: Jhecelyn Salting, Jhulo Salting, Jean Esther Salting

JameelahJaina Salting& Pauline Salting

Trainings & Seminars

July 14, 1994 Union Industries Inc.& Maytag International

Field Service Seminars on Admiral Washers & Dryers

September 25, 2000 Executive Technical Consultants

Trade Test & Training Center

Electronics Technician (B+)

November 10, 2005 Technical Education and Skills Development Authority (TESDA) Certificate of Competency

For Cellphone Repair Technician

November 24, 2002 ACA Franchise Group

Customer Service Seminar

May 27, 2013 GSM Sandwich

Certificate of Participation

(CAMANAVA Chapter)

June 13, 2014 ASIA-PACIFIC PACKAGING EQUIPTMENT CORP.

Basic Principle of Ishida MultiheadWeigher& Metal Detector (Certificate of Attendance)

Dec. 20,2015-April 10,2016 Advance Competencies Technological Manpower Academy

Certificate of Training NC-II

CDOMRACS

April 24, 2016 Advance Competencies Technological Manpower Academy

Certificate of Merit - OUTSTANDING

CDOMRACS (IISQC)

May 30, 2016- National Certificate RAC Servicing NC-II

May 29,2021 Certificate No. 161***********

September 7,2016 Certificate of MEPFS Troubleshooting for Commercial

Buildings

*BOSH Training

*In-house EHS and cGMP Training

September 18,2016Certificate of Boiler Operation & Maintenance

Certificate of HVAC Design, Operation & Maintenance

February 01,2017 Certificate of Solar For Home Installation Workshop

February 02,2017Certificate of Instrumentation And Control

AFFILATIONS:

1994-1995 Executive Council – College of Engineering (COE - EC)

Board Member

1995-1996 Executive Council – College of Engineering (COE - EC)

Appointee

2011-2012 Healthy Exposure and Sports Association, Inc. (HESA, Inc.)

Officer

Work Experience:

Company : Betans Trading & Engineering Address ; 152 Roosevelt Ave., Quezon City

Position : Maintenance Supervisor

Duration : June 01, 2012 up to Prersent

Job Description:

-Supervises and assigns the work of maintenance employees.

-Assessment of potential developments and production of detailed technical reports, including site visits with the appropriate members of the management team to ensure the best cost engineered solution is produced.

-Analyze technology, resource needs, and market demand, to plan and assess the feasibility of projects

-Inspects work for completeness, such as install, maintain and repair heating and air conditioning systems in buildings

-Determines material, equipment, and supplies to be used. Transfers equipment and personnel from one project to another as necessary.

-Keeps time cards and other routine records.

-Coordinate and direct projects, making detailed plans to accomplish goals and directing the integration of technical activities.

-Coordinates or installs, inspects, repairs and maintains the electrical, plumbing,

Mechanical and other related systems in all health department locations.

-Coordinates or inspects, operates and maintains the heating, cooling and ventilation systems in all health department locations.

-Does general repairs such as painting, patching walls, tiling, security hardware, hanging Shelves and landscaping.

-Coordinates renovations of existing facilities and the construction of new facilities.

-Coordinates and inspects major contract work on the electrical, plumbing, mechanical, satellite, antennas and other related systems in all health department locations.

-Assures around-the-clock responsiveness to mechanical failures or emergency situations by assisting Facilities Management-Maintenance to anticipate requirements for exceptional mechanical maintenance efforts, assisting in developing appropriate contingency plans to respond to those needs and other emergency conditions, assisting in the coordination of contracted services beyond the capabilities of Building & Equipment to handle, and assisting with maintenance efforts to restore the environment to normalcy.

-Helps to reduce the likelihood of a significant disruption of utility services (i.e., heating, cooling, electricity) provided to the Buildings & Factories by providing utility interruption approvals and notifications to affected areas.

- Plan and oversee all repair and installation activities

-Allocate workload and supervise upkeep staff (custodians, janitors etc.)

-Monitor equipment inventory and place orders when necessary

-Monitor expenses and control the budget for maintenance -Manage relationships with contractors and service providers

-Keep maintenance logs and report on daily activities - Resolve concerns, conflicts and problems arise that the service are provided in a

professional manners.

-Attend and participate meeting regarding the work to be done; attend training classes.

-Review work orders before and after completion.

-Assigned and distribute work orders and prepare reports.

-Coordinate work in line with Plant schedule. - Attend pre-bidding and other HVAC concerns.

-Project costing and estimation for all project concerns.

-Ensure health and safety policies are complied with City Ordinance related to environmental protection, hazardous materials, hazardous waste, and the handling of chemicals by coordinating with the Director of Environmental Management, enforcing applicable policies, laws, and regulations, and maintaining all Material Safety Data Sheets (MSDS) and “Right to Know” stations, per the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard.

-Possession of a current and valid motor vehicle operator's license.

Company Jules & Lyn Trading

Address Ever Gotesco Grand Central

Position: Self employed/ Manager/Technician

Duration : 2006-2012

Job Description:

- Supports the Facilities Management Department by assisting the Assistant Directors of Facilities Maintenance, Custodial Services, and Grounds Services in the development of departmental policies and procedures, developing and scheduling training on safety topics, and maintaining safety training records.

2. Supports Facilities Management by developing schedules and required materials for the preventive maintenance program.

3. Plans, assigns, and reviews work activities for Facilities Maintenance, Grounds, and Custodial staff by utilizing the Computerized Maintenance Management System (CMMS) application, conducting job site inspections, providing advice to staff on procedures, problem areas, job specifications, and required documentation.

4. Develops technically qualified and cooperative support staff by supervising and evaluating all assigned support staff and assuring compliance with University rules and policies.

5. Coordinates and oversees all procurement actions by establishing and implementing service contracts, reviewing and maintaining supply inventories, preparing and approving all supply requisition orders, assuring procurement actions are in compliance with all University policies and procedures, preparing and writing technical specifications for all service contracts, including but not limited to, glazing, emergency roof repair, emergency generators, water treatment chemicals, emergency plumbing repairs, insulation installation and repair, emergency electrical repairs, grounds and lawn care services, and contract carpet cleaning, and ensuring that all contracted services meet expected results through communication with the department ordering the services and the respective service contractor.

- Reaching sales targets and increasing profits -Dealing with customer service issues such as queriesand complaints ---Interviewing and recruiting new staff

- Supervising and organizing training - Organizingrotas and holidays

- Overseeing stock control and receiving orders

-Troubleshooting & repair of electronic circuitry Electronic appliances like, TV,

VCD, VHS, component Amplifier, CCTV, Digital Camera (DIGICAM)

-Testing of electronic circuit, both w/ sophisticated

Electronic instrument(oscilloscope/logic analyzer)

-Install & troubleshoots Washers, Dryers, Ranges,Refrigerators, Air-conditioning Units and other large appliances.

-Instruct customer on how to operate the appliances Properly.

-carries out proper fault diagnosis to improve the quality of thephone&appliances.

diagnosis and correction of any hardware or software using multi-tester,digitized hot air,set of screw drivers,

soldering iron, soldering led, flux, PC, mobile gadgets,

-repairs on mobile phones to improve the phones' Productivity.

-making repairs and keeping customers informed about

services provided by the company/shop- including warrantiesand after-sale -provides advice and recommendations about phones.

- Perform troubleshooting, repair on iPhones andiPads

- Demonstrate effective troubleshooting and problemsolving skills - Effectively manage time and resources to controlcosts, enhance efficiencies and meet commitments

- Communicate effectively with internal and external customers

-Previous experience in reballing chips & IC’s-Previous experience in changing iPhone, iPhone,Touch Screen& mobiles/gadgets encountered for diagnose & corrections.

Are: Nokia, Sony Ericsson, Motorola, Samsung, Sharp, Siemens

Samsung Galaxy, Blackberry, iPhone, HTC, PSP iPhones, iPads, //Android Software’s :resetting’, unlocking’, rooting.Calibrating&restorations, Tablets (for Hardware &Software’s) & LAPTOPS& DESK TOPS PC

Troubleshooting & Repair of LAPTOP& Desktop

SOFTWARE: Reformat, Reprogram, reset CMOS settings

HARDWARE: no power, no display, no lights, keyboard/Touchpad failure, no sounds, not charging, hang-up, no

Wifi/internet connections & many more…

Electrical Responsibilities for system operations

1.Assemble, install, test,diagnose malfunctioning systems and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.

2. Connect wires to circuit breakers, transformers, or other components.

3. Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.

Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system.

Company : Industrial Controls Corporation (ICC)

Address Ortigas Pasig M.M.

Position : Electromechanical Engineer

Duration : . 2003 to 2006

Job Description: Installation, repair, Preventive Maintenance of all

controllers like motor controller/INVERTER(variable frequency drive), Electronics Circuit Board Controller of Boiler, Burner. Electro pneumatic controlled compressed air for Cylinder, PLC or programmable Logic controller (wirings, repair of electronic circuitry, download & upload of programs such as software’s, encoding PLC program base on the sequence of operation of the system), Motor controls(start-stop, reverse-forward, wye-delta) Digital Weighing Scales, CCTV, Audio/Video system, Electrical wirings, installation, Troubleshooting& repairs of contactors, circuit breakers & overload relay/protectors. Metal detector, Inkjet Printers.

Align, fit, and assemble component parts, using hand tools, power tools, fixtures, templates, and microscopes.

Analyze and record test results, and prepare written testing documentation.

Inspect parts for surface defects.

Install electrical and electronic parts and hardware in housings or assemblies, using soldering equipment and hand tools.

Read blueprints, schematics, diagrams, and technical orders to determine methods and sequences of assembly.

Repair, rework, and calibrate and pneumatic assemblies and systems to meet operational specifications and tolerances Test performance of electromechanical assemblies, using test instruments such as oscilloscopes, electronic voltmeters, and bridges.

Verify dimensions and clearances of parts to ensure conformance to specifications, using precision measuring instruments.

Company : Snow White Laundry & Drycleaners

Address : Dubai UAE

Position : Laundry Technician

Duration : 2001-2003

Job Description: Conduct periodic inspections of laundry and dry cleaning equipment; repairs and performs preventive maintenance on all laundry equipment including electrical, mechanical, gas, and air compressed systems.

Performs general maintenance duties such as clearing material and/or equipment jams, replacing belts, repairing sheared pins, changing linen filter, monitoring component wear,

Clean and lubricate as needed, order and maintain replacement parts and other duties as needed to assure the effective and efficient operation of laundry and dry-cleaning equipment systems and their related tools, equipment, and areas.

Performs inspections, major and minor repairs and replacements on electro/mechanical, pneumatic and hydraulic systems, subsystems, components and parts.

Performs preventative maintenance, troubleshooting from schematic drawings, operation analysis, corrective repairs and operator/user training.

Receives and reviews work orders/requests to determine, estimated cost and man-hour requirements. Requisitions and/or purchases supplies and materials.

Advise management of general condition of facilities and equipment and any unusual problems or concerns that may arise; make recommendations for facilities improvements or upgrades.

Repairs and maintains washers, driers, extractors, condensers, pumps, blowers, presses, and other laundry equipment& controllers like motor controller/INVERTER(variable frequency drive), Electronics Cicuit Board Controller of Boiler, Burner. Electro-pneumatic controlled for cylinder, PLC or Programmable Logic Controller (wirings, repair of electronic circuitry)

Operates, examines, and dismantles equipment to diagnose cause of malfunction. Repairs or replaces parts, using hand tools and measuring instruments. Replaces components, such as bearings, motors, and micro switches.Replaces faulty sections of pipe, valves, and fittings, using plumbing tools.

Dismantles steam traps and removes sediment. Removes faceplate from equipment to clean out dust and lint.Replaces worn or torn aprons, roll covers, and pads on mangles.

Lubricates machines and equipment, using grease gun and oilcans.

Company : Union Industries Inc.

Address : Makati City, Metro Manila

Position : Service Technician

Duration : 1994-2000

Job Description:-Install, calibrate, and operate electronic equipment .

-Repair and maintain electronics circuits & system in service using the above methods

-troubleshooting & repair of electronic circuitry.

-design layouts of audio and video equipment, and perform upgrades and maintenance.

-Perform minor repairs and routine cleaning of audio and video equipment.

-Repairs and maintains washers, driers, extractors, condensers, pumps,blowers, presses, and other Kitchen & Laundry equipt- ment, Dishwasher (Hobart)

Hot Chocolate Dispensers; Coffee Grinders and Brewers; Coffee Deck Ovens; Countertop Fryers; Charbroilers, Juice Dispensers, Microwave Ovens, Refrigerated Display Cases, Bar Blenders, Drink Mixers, Food blenders

Company : LG Collins Electronics

Address : Pasig City, Metro Manila

Position : Audio Line Technician

Duration : 1992-1994

Job Description: Troubleshooting & repair of electronic circuitry of an

Electronic appliances like, TV, VCD, VHS, component

Amplifier in audio line production area.

-Testing of electronic circuit, both w/ sophisticated

Electronic instrument(oscilloscope/logic analyzer)

I hereby certify that above information are true and correct according to my knowledge & beliefs.

Jules M.Salting

Applicant

Contact this candidate