Construction Manager

J E S S I E L O Z A D A J R. 806-***-**** **************@*****.*** Shallowater, TX.

Experience:

Commercial Estimator 06/04/2018-Present SouthTech, Lubbock, TX. (Tom Habib)

Responsibilities include: Take offs of metal studs, masonry, painting, EIFS, sheetrock on commercial, and industrial facilities. Utilizing Plan Swift computer program from PDF files sent to us from Design firms, architects, and engineers. Will in some cases take off a project by hand. Organizing entire estimating office from proposals, schedule of values etc. Start with evaluation of floor plans, roof plans, structural/civil and site plans, assigning each project with a project number.

Estimating projects from thousands of dollars to several -million dollar commercial, industrial, and residential construction projects for different types of facilities, including hotels, motels, office complexes, restaurants etc. Prepare and coordinate construction estimates at all levels from design, schematics, concept development, and construction documents (Spec's and RFI), evaluating scopes of work, preparing quantity surveys, reviewing project plans and specifications. Developing spreadsheets that enhanced the estimating processing.

Estimator Specialist 10/15/2016-Present 84 Lumber, Lubbock, TX. (Bob Villarreal)

Responsibilities include: Take offs of wood products only, commercial, industrial, and residential housing. Utilizing Plan Swift computer program from PDF files sent to us from Design firms, architects, and engineers. Will in some cases take off a project by hand. Start with evaluation of floor plans, roof plans, structural/civil and site plans, assigning each project with a project number. I taking notes on every project and file my notes to make sure that everything is documented.

Estimating projects from thousands of dollars to several -million dollar commercial, industrial, and residential construction projects for different types of facilities, including hotels, motels, office complexes, restaurants etc. Prepare and coordinate construction estimates at all levels from design, schematics, concept development, and construction documents (Spec's and RFI), evaluating scopes of work, preparing quantity surveys, reviewing project plans and specifications.

Project Manager/Estimator 11/2011-5/2012 Bionitrogen Corp, Lubbock, Texas

Job duties included: Site selection, Manufacturing/construction, Feed-stock/biomass coordination, design consultant selector, preliminary site plant design and cost benefit analysis. Coordination with, South plains water district, Fed. Municipal governments and other agencies, enabling permitting and certifying. Also, coordination with safety organizations and environmental agencies such as OSHA, TCEQ and EPA.

Site selection: included evaluation of property to verify availability, access to rail and highway infrastructure, environmentally suitable, community and city council approved, economically feasible and utility accommodated (electrical, potable water, sewer and fire protection).

Manufacturing/construction: Coordination with the Project Management Team for the fabrication, construction and assembly of modules that are relevant to the gasification/syn-gas production and or other catalyst support systems (Fischer Tropsch, Haber Bosch). Other duties include: estimating equipment/construction and component cost, bid proposals, interviewing process engineers and design/build groups. These bio-energy facilities also include other system functionality such as equipment related to: warehousing, machine shop/ buildings, hopper/bin storage, front end loaders, elevators, weighing scales, drying slabs, conveying/pneumatic systems and other components necessary for syn-gas and chemical production.

Feed stock/biomass coordination process: Selection of bio-degradable materials such as wood chips/ cotton gin waste/corn stalks etc. for syn-gas preparation. Other duties included surveying towns for biomass extraction from cities, communities and farms.

Architectural/ Engineering/Project management design coordination with Chemical engineers/consultants and construction managers for the purpose of fabricating these facilities. Assisted and coordinated with the Chief Engineer in developing spreadsheet equipment cost, Industrial estimates and reports. Developed warranty component cost list spreadsheets for O&M schedules and provided a comparative cost analysis of different sites.

Operations Manager/Estimator 11/07-11/2011 Biosynergies LLC Lubbock, Texas

Officer manager, coordination of all meetings for Site selection, manufacturing and construction. Launched entrepreneurial firm for the new startup company. Met with Economic development centers in the region. Enter acted with Federal and state agency. Coordinated all design consultants, wrote RFP’s, feasibility studies for site plant design and cost benefit analysis for property and facility.

Manufacturing/construction: Coordination with the Project Management Team for the fabrication, construction and assembly of modules that are relevant to the gasification/syn-gas production and or other catalyst support systems (Fischer Tropsch, Haber Bosch). Other duties include: estimating equipment/construction and component cost, bid proposals, interviewing process engineers and design/build groups. These bio-energy facilities also include other system functionality such as equipment related to: warehousing, machine shop/ buildings, hopper/bin storage, front end loaders, elevators, weighing scales, drying slabs, conveying/pneumatic systems and other components necessary for syn-gas and chemical production.

Site selection: included evaluation of property to verify availability, access to rail and highway infrastructure, environmentally suitable, community and city council approved, economically feasible and utility accommodated (electrical, potable water, sewer and fire protection).

Operations Manager/Designer 6/94 -11/07 Cratech Inc. Tahoka, Texas

Coordinated all meeting with State and federal agencies for the commercialization of this new technology, this included financial institutions banking entities both in the USA and abroad. Wrote reports on Site selection, manufacturing and construction processes, designed calculator biomass feed stock spreadsheets and coordination process, designed comparative gasification to wind energy spreadsheets, developed biomass to construction weight calculators, preliminary site plant design and cost benefit analysis for property and facility. Assisted in the overall design of the gasification process.

Architectural/ Engineering/Project management design coordination with Chemical engineers/consultants and construction managers for the purpose of fabricating these facilities. Assisted and coordinated with the Chief Engineer in developing spreadsheet equipment cost reports. Developed warranty component cost list spreadsheets for O&M schedules and provided a comparative cost analysis of different sites.

Site selection: included evaluation of property to verify availability, access to rail and highway infrastructure, environmentally suitable, community and city council approved, economically feasible and utility accommodated (electrical, potable water, sewer and fire protection).

Manufacturing/construction includes: Coordination with the Project Management Team for the fabrication, construction and assembly of modules that are relevant to the gasification/syn-gas production and or other catalyst support systems (Fischer Tropsch, Haber Bosch). Other duties include: estimating equipment/construction and component cost, bid proposals, interviewing process engineers and design/build groups. These bio-energy facilities also include other system functionality such as equipment related to: warehousing, machine shop/ buildings, hopper/bin storage, front end loaders, elevators, weighing scales, drying slabs, conveying/pneumatic systems and other components necessary for syn-gas and chemical production.

Feed-stock/biomass coordination process: Selection of bio-degradable materials such as wood-chips/ cotton gin waste/corn stalks etc. for syn-gas preparation. Other duties included surveying towns for biomass extraction from cities, communities and farms.

Owner (President of Company) 4/92-6/94 JL DESIGN Lubbock, Texas

Responsibilities include: Capital cost estimates/ budgets for the Architectural & Electrical industry, site/grading plan design, site surveying, residential house plans, res-check reports, coordination with manufactures and suppliers. Other duties included Electrical design (Commercial, Industrial), telephone-cabling surveys, pictorial details, and schematics. I am also HAZMAT Certified through Enprotec Environment Engineering. I had a long-term contract with a Company in the Renewable energy sector drawing and designing component equipment, metal structures, and tanks/vessels. I developed the software programming for Pro E to manufacture components and vessels. Coordinated with machine shops and component manufactures.

ELECTRICAL DESIGN ENGINEER For MEP FIRM 2/91 - 4/92 ALLIED & ASSOCIATES Lubbock, Texas

Responsibilities included: Equipment and capital cost of electrical equipment estimates, budgets for specific jobs (Government jobs-Pantech etc.), and reports for state and federal facilities. Most designs were on office buildings but my job also covered shopping centers, schools, hospitals, clinics, sports complexes and industrial facilities. Wire, conduit, transformers panel boards, short-circuit and overload design calculations were mandatory by the state of Texas, documented in our office. All electrical equipment, panel boards, transformers, fire alarms, security systems, lighting, and HVAC/plumbing equipment layouts which included diagrams, schematics etc. approved by client. All assignments and jobs required equipment and construction specifications including lighting fixtures, receptacles, panel boards, motor control centers, facilities/site survey, switchboard/switch gears, HVAC relays/controls, electronic control panels, fire alarm systems, security systems and computer/data equipment. Other duties included architectural, client, office staff and construction meetings. National Electrical Code law interpretation for clients and other job coordinators involved with a project. Also recommended electrical contractor and other sub-contractor for specific job duties. Other job duties involved assigning jobs to designers and drafting personnel. All work on CAD systems that utilized AutoCAD/Versacad.

ELECTRICAL DESIGNER MEP FIRM 2/88 - 2/91 AGEW STORRS & ASSOCIATES Lubbock, Texas

Responsibilities included: Documentation of wire, conduit, transformers, panel boards, short-circuit and overload design calculations mandatory by the state of Texas and all layouts approved by client. All layout of equipment bound by strict code interpretations. All assignments and jobs required equipment and construction specifications of lighting fixtures, receptacles, panel boards, motor control centers, switchboard/switch gears, HVAC relays/controls, electronic control panels, fire alarm systems, security systems and computer/data equipment. Survey of site and facilities mandatory for all projects. Architectural and client coordination of job specifics relative to project. Office/staff construction job coordination meetings. National Electrical Code law interpretation with contractor assessments and selections. Other duties involved assigning jobs to other designers and drafting personnel. All work on drawing board.

Sales Associate for Frito Lay 1977-1979

Responsibilities included: Route sales of potato chips, corn chips, and other snacks with a weekly and monthly sales quota. Inventory control of my own warehouse, and deposited monies that I collected on a weekly basis. Enjoyed my work had to quit because I was losing money due to truck driver taking some of my inventory after I had counted my order.

Other Cert:

Board Member of Agricultural Bioenegy Products LLC 2008

Board Member of Biosynergies LLC 2008

Affiliated with Texas Tech University 2009

Education:

American Commercial College-Lubbock, TX 1979 – 1980

Major-Architectural and engineering design (4.0)

Howard Junior College-Big Spring, TX 1978 – 1979

College Credits (3.8)

Brownfield, High School – Brownfield, TX. 1971-1975

General Studies (3.0)

Contact this candidate