Resume

Sign in

Rigging Supervisor

Location:
Lagos, Lagos, Nigeria
Salary:
4000 USD
Posted:
October 16, 2018

Contact this candidate

Resume:

JERRY SPRINGER IHEAGWAM

PERSONAL DETAILS:

Nationality: Nigerian

Date of Birth: 10th February 1979

State of Origin: Rivers State

Address: Block 7 Mesachi Estate Off Obed Layout Rumuodomaya,Portharcourt, Nigeria

Mobile: +234********** +234**********

Email id: ac7eb1@r.postjobfree.com

EDUCATIONAL DETAILS:

Institute Tutelage Asia Pacific Malaysia Diploma in Business Administration 2008

Scaffolding Training Institute Houston Texas. 2010

Federal University of Technology AkureOndo State Nigeria

Diploma Mechanical Engineering 2005

Higher National Diploma Mechanical Engineering 2002

Alliance FrancaisePortharcourtDiploma in French Language Certificate 2003

Certificate in Basic Scaffolding Earth Watch Integrated Technologies2010

Lifting Equipment Engineers Association (1, 2, 3) 2010

Nebosh IGC Safety Expert Course 2015

Basic Emergency Response Training and First Aid2014

Lahyer Scaffold Training (I. P.E S) (a subsidiary of PreziosoTechnilor)2015

BosietTraining I. P.E S Prezioso2013

(Lafarge Cement Wapco, Lakatabu Expansion Project Nigeria)2012

Helicopter Underwater Escape Training TollMannPortharcourt2013

Crane Inspection & Certification Bureau2013

Seaman Training Course 2016

West African School Certificate (WASC)2007

Joe Marine Institute of Nautical Studies and Research 1999

(Safety Training Certificate)1999

Joe Marine Institute (Medical Emergency Training Certificate)1999

WORK EXPERIENCE:

DOF SKANDI SKANSEN July-Present

POSITION: DECK FOREMAN

PROJECT: EGINA FPSO

(TOTAL FIELD)

NAME OF VESSEL: SKANDI SKANSEN

RESPONSIBILITIES:

Installing the mooring lines for EGINA FPSO& OLT HOOK-UP

WORK EXPERIENCE:

SAIPEM CONTRACTING NIG. LTD (SEPT. 2016 – NOV. 2017 )

POSITION: RIGGER .

PROJECT: EGINA UFR, PIPELAYING VESSEL SAIPEM FDS2 (TOTAL FIELD)

NAME OF VESSEL: FIELD DEVELOPMENT SHIP (SAIPEM FDS2)

RESPONSIBILITIES /ACCOMPLISHMENT: As a RiggerOnboardFDS2

- Rigging of Riser and Spools for subsea

installation.

- I carry out a visual routine check of lifting

accessories& tools to ensure they are in

good working condition.

- I support the marine team during

mooring and unmooring vessel & spread.

- I ensure compliance to safe rigging

practices at every step of the rigging

process.

- Perform cleanliness and maintenance

duties on rigging equipment and tools.

- I make sure that all rigging gear is stored

in a proper manner and is ready for the

next shift.

- I present a work reports at the end of

each shift.

- Using verbal communication or hand

signals so as to ensure the safety and

movement of heavy equipment or

materials.

I ensure a safe position during lifting

operation& also take cognizant the

position of others.

I identified a hazardous hoisting error &

rectified it timely, saving the company

from a big loss.

BOURBON EVOLUTION 801 (MSV) VESSEL (APRIL 2016-AUG 2016)

POSITION: SUBSEA RIGGER

PROJECT: EGINA UFR, SUBSEA PROJECT, TOTAL FIELD (OFFSHORE).

RESPONSIBILITIES / ACCOMPLISHMENT: As a Rigger

Onboard Vessel.

I undertake subsea rigging & ROV

rigging support services, ship to ship

cargo transfers, taking dynamic factor

into cognizance.

- I ensure that all certification is up to

date& are correctly color coded.

- I assist in tooling, deployment &

recoveries of subsea material via:

Subsea Test Manifold (STM),

Hydraulic Power Unit (HPU), Subsea

Power Hydraulic Unit (SPHU), PB, XFL,

HFL, BOP, ACID WELL STIMULATION.

- I support the marine team during

mooring&unmooring vessel &

spread.

- I report unsafe working condition, any

near misses & incidents.

- Performed selection of rigging &

lifting gear with respect to safe

working load ( SWL ).

- I ensure running taglines are correctly

installed& recovery of crane wire with

rigging to deck.

- Rigging of riser & spools for subsea

instillation.

- Connect hook to ML on PB rigging.

- Visual routine check of lifting

accessories& tools to ensure they

are in good identification working

condition.

POINTICELLI NIG. LIMITED. (2014 - 2015)

POSITION: RIGGING CORDINATOR

PROJECT: OFON PROJECT, TOTAL FIELD (OFFSHORE).

RESPONSIBILITIES / ACCOMPLISHMENT As a Rigger/Banks man

- I attach loads to rigging machinery in

order to move them from one place to

another.

- I ensure that pulleys and blocks are

properly attached to beams, ceilings and

pole booms.

- I make sure that the right amount size of

bolts and clamps are used for each

attachment.

Handle the movement of heavy

equipment with the help of controls line.

- Assemble and dismantle rigging

maneuverability before each movement.

- Ensure compliance to safe rigging

practices at every step of the rigging

process.

- Perform cleanliness and maintenance

duties on rigging equipment and tools.

- Ensure that all rigging gear is stored in a

proper manner and is ready for the next

shift.

- Create work reports at the end of each

shift.

- Manipulate rigging lines and hoists in

order to control attached heavy

equipment.

- Using verbal communication or hand

signals so as to ensure the safety and

correct movement of heavy equipment

or materials.

SAIPEM CONTRACTING NIG. (2012-2013)

POSITION: DECK FOREMAN

PROJECT: OMOKU GAS TURBINE

RESPONSIBILITIES / ACCOMPLISHMENT

Lifting of exhaust side panel, turbine

casing, outer combustion wrapper

casing, compressor discharge casing,

inner compressor discharge casing.

Dismantling & hauling of pipe rock,

concrete& condemned pipe lines,

erection of pipe spool, steel structure,

exchanger, compressor, pump motor

& equipments.

I ensure compliance to safe rigging

practices at every step of rigging

process and create work reports at the

end of each shift.

I performed selection of rigging &

lifting gear with respect to safe

working load (SWL).

I ensure a safe position during lifting

operation& also take cognizant the

position of others.

Proactively determined obstruction

affecting structural stability on a major

site and communicated the same

effectively, which led the management to

resolve the issue and avoid hazardous

rigging timely.

I suggest the replacement of the metal

part of the ace winch to avoid any

abrasion that can lead to damage the

dynema rope resulting in a release of

storage energy with possibility to injure

someone due to the tension.

DAEWOO NIG. LTD (2011-2012)

POSITION: LEAD HAND RIGGER. .

PROJECT: NIGERIA LNG GAS PLANT (SHUT-DOWN TEAM MAINTENANCE)

RESPONSIBILITIES /ACCOMPLISHMENT:

Lifting & offloading of heavy

equipments& other construction

materials such as Gas turbine

generators, 75tons turbine core

rotor, erection of transformers.

Visual routine check of lifting

accessories& tools to ensure they are

in good & proper working condition.

QATAR GAS (2009-2010)

OFFSHORE QATAR

POSITION: DECK FOREMAN

Carry out Deck Foreman’s responsibilities such as plan deck crew jobs, offload/backload cargo. Organize and Supervise the rigging jobs, scaffolding activities, material distribution, waste segregation, housekeeping, washing of platforms and bridges. Operates all the cranes of the Field platforms. Carry out regular inspection of the crane and report malfunctions and defects of the cranes.

Carry out the HLO duties as responsible for safety of personnel and equipment on helideck during helicopter operations. Comply with all safety rules and regulations concerning with Heli-fuel skid inspection, landings, take offs, shutdowns and refuelling of helicopters.

Coordinate with FLO and deck crews. Provide all required assistance to maintenance, production, construction and safety crews. Supervises helideck assistants and passengers/freight on and off aircraft.

Converses wit Logistics Officer pertaining to operation requirement. Coordinates loading/offloading of aircraft with helicopter crews.Responsible for the operation of the whole helicopter fuel system according to field operating procedures. Takes fuel samples and test for contamination daily and prior to refueling of aircraft.

Takes fuel system checks and keep records. Keeps record of fuel quantity in fuel bulk tanks and advise and organize when refilling of tanks required. Maintains proper records of fuel dispatched and received. Control and account for the safe movement of hazardous good to and from the platforms in line with International Dangerous Goods (IMDG) regulations. Arrange recertification of all lifting gears and equipments on NFB during bi-annual inspection and carry out corrective actions as per the TPI Inspection report. Arrange the required mandatory training for the new deck crews and crane operators.

Assist to FLO to check-in passengers and updating the POB systems in the Company’s computerized tracking system. Supervise all required rigging and scaffolding activities on platforms and meet environmental expectations by maintaining high housekeeping standards on all platforms at all times. Maintain records of all Lifting gears available at platform and comply with all necessary requirement for adhoc and bi-annual lifting gear inspection activities.

Responsible for support of Company Safety, environment and quality policies and programs, and carrying out specific duties and responsibilities in accordance with PTW and management system.

HOBBIES:Swimming, Travelling and Reading

Referees:

Ronny Iversen

Offshore ManagerTOTAL&SAIPEMEgina FPSO

Skandi Skansen

Email: ac7eb1@r.postjobfree.com

Mobile: +479*******

AJIBOLA OYEKUNLE

Method Engineer

TOTAL E&P

Email: ac7eb1@r.postjobfree.com

Mobile: 080********



Contact this candidate