Sign in

Construction Manager

Meridian, ID
October 10, 2018

Contact this candidate


Carl F. Schumacher

**** * ******* **. – S***

Meridian, ID 83642

Cell No. 515-***-****



I am seeking an advanced, challenging, and fast paced position where my talents and experiences will be utilized to contribute to company and personal growth & profit.



Positions - Manager, Lead, Checker, Designer, Modeler, Animator, Renderer, Draftsperson, Site Lead, Asst. Framer, Roofer, Gofer

Duties - Testing & Recommendation, Development & Implementation of CAD Standards, Design, Drafting, Modeling, Animation, Field Walk Downs, Stake Surveying, Extraction of Sections, Creation of Construction Documents, Creation of Smart Blocks & Objects, Detail Libraries

Civil, Structural & Mechanical:

Nuclear – Waste Treatment Facility (Hanford, WA), Enrichment Facility (Eunice, NM), Nuclear Plant Delamination Project (Crystal River, FL), Fukushima Assessment “FLEX” Program (Huntersville, NC)

Oil & Gas – Refueling Depot(DeKalb Co. Int. Airport, Chamblee, GA & Union Pacific Rail Yard, Chicago, Il), Midstream Pipeline (Keystone Line), Low Sulphur Field Condensate Refinery (Qatar), Sulfur Recovery Plant (TKS, Billings, MT), Fuel Storage Terminal Walk down (Paducah, KY), Oil Refinery Crude Unit (BP Cherry Point, WA), Oil Refinery “Crude by Rail” Project (Phillips 66, Billings, MT), Coke Drum Replacement Project (Bellingham, WA), Natural Gas Compression Station (Wyoming), U.S. Oil Sands Refinery (Sandy, UT)

Mining & Mineral – “Expansion of Operations” Gold Ore Processing Plant (Barrick, Gold Strike, NV)

Hydro Infrastructure – Water Treatment Facility (New York, NY), Waste Water Treatment Facility (Atlanta, GA), Site Drainage System ( Norcross, GA)

Electrical: Telecommunication Design, Power Transmission & Distribution (OH & UG), MV & Data Raceways, Lighting, I&C Circuitry Layout & Design, LAN, Control Room Layout, Security System, Lighting System, Single Line Schematic, Loop Diagram, Raceway Design, Cabling Tray Layout & Design, Circuit Labeling, Control Panel Layout and Wiring Diagram

Architectural: Pharmaceutical Clean Room, Hospitality Structure, High Rise Resort Condo, Hotel, Medical Facility, Office Building, Office R&D Facility, Refrigeration Warehouse, Renovations, Parking Deck, Multi-purpose Petroleum/Service (Gas) Station, Custom and Corporate High End Single & Multi Family Residential Home

Aerospace: 3D VIP Interior Design, 3D Flight Deck Instrumentation Panel Configurations


29+ Yrs. Total Exp. with multiple CAD Packages 2D & 3D

Owner of Autodesk Architecture Engineering Construction Collection 2018 - Consists of:

oAutoCAD, Revit, Navisworks, 3DS Max, Vault, Architecture, Electrical, MEP, Map 3D, Plant 3D, Civil 3D, Map 3D, P&ID, Plant 3D, Raster Design, Utility Design, FormIt, InfraWorks ReCap, Vehicle Tracking

CADWorx Plant & Equipment (Ver. 2009 - 2015)

ProSteel & ProConcrete

Bentley Microstation (Ver. 95-SE, J, V8, & V8i) (Prev. Intergraph 4 - `92)

oInTools, Inroads, Triforma, Terramodel, Smallworld, AutoPlant, Smartplant, PlantSpace, IRAS B&C, Decartes


oCore, Auto Architect, Civil Survey (Ver. 4-8)

CATIA V5 R16 & 17

Unigraphics (V18, NX3, 4 & 5)

oCertified NX5-Aug/07

Ventyx Asset Suite

Adobe Photoshop, Corel Draw Suite, Art Explosion, Microsoft Office Suite


Associates Degree in Mechanical Drafting / Design

Associates Degree in Architectural Drafting / Design

Associates Degree in Computer Aided Drafting / Design

Certifications in Basic, COBAL & FORTRAN Computer Languages

ASME 14.5M 1994 GD&T

Training in AUTOLISP, Visual BASIC, C++, HTML, & JAVA Computer Languages

Attended Classes @ Vo-Tech for Manual Mechanical & Architectural Drafting (before CAD)

Previous Construction Experience (Surveying, Framing, Roofing, Landscaping, HVAC etc…)

Microsoft Office (Word, Excel, Access, Outlook, FrontPage etc.)

HAZWOPER – Hazardous Materials Technician Course, Certified in accordance with OSHA 29 CFR 1910.120

MSHA ICPE Certified

TWIC Registered


October 2017 Present

Ch2m Hill / Jacobs Engineering – Boise, ID

Revit Designer (Contract position)

Worked at both Intel (Chandler, AZ) and Micron (Boise, ID) Semi Conductor Production Plants

Created drawings for the MEP systems with focus on HVAC, Wet and Dry Piping systems

Solved Model Clashes generated in Navisworks of the Base Build

Generated Install Documents (Plans, Profiles, Sections) for Construction Crew

All work was performed in AutoCAD 2017/19, Revit 2017/19 and Navisworks 2017/19

March 2017 July 2017

Cupertino Electric – Ankeny, IA

BIM Detailer (Contract position)

Prepared Electrical BIM Model of Data Center

Designed Medium Voltage Conduit Layout for Site / Building

Designed Data Conduit Layout for Site, Trailer City and Sub-Structure

Temp Site Lighting Layout

Performed Clash Analysis of Models in Navisworks 2016

Generated Install Documents (Plans, Profiles, Sections) for Construction Crew

All work was performed in Revit and Navisworks 2016

July 2016 to March 2017

Arcelor Mittal / Nippon Steel – Calvert, AL

CAD Specialist III / Drawing Manager (Permanent position)

Support ongoing facility operations by providing CAD drawing / document management and drawing services to Project Engineering, Facilities, Utilities, Mill Maintenance, Mill Operations and contractor relations.

Perform drawing and documentation quality control via means and detailed analysis, and actively maintain data within facility information systems.

Generate changes, and maintain CAD drawings, site models, and specifications for the site.

Review compatibility requirements of CAD data from contractors to ensure the information complies with the standards for the Engineering Team.

Integrate CAD data from contractors for the company.

Provide extracts from drawings.

Develop prints for distribution to site and contractors as needed.

Generate and maintain a database of the most recent and most important documents and drawings.

Assist in collecting documents and data to support the development and maintenance of the drawing management system.

Continually review current document management system for improvements.

AutoCAD, REVIT and Civil 3D 2017

October 2015 to March 2016

Tessenderlo Kerley Services – Phoenix, AZ

3D Piping Designer (contract position)

Worked on the operational expansion of an existing Sulfur Recovery Plant Owned by Jupiter / Conoco Philips 66 in Billings Montana.

Created and located 3D models of a Molten Sulfur Day Tank, Catalyst Bed, Acid Gas Regenerator, Sulfur Condenser, Sample Cooler, Molten Sulfur Storage Tank and Pumps.

Piping included Molten Sulfur, Nitrogen, Low and High Pressure Steam & Condensate, Cooling Water, Acid Gas, Utility Air, Boiler Feed, Blowdowns and Vent lines.

Nozzles on the equipment were Steam Jacketed and lines were heat traced.

Piping Designers were responsible for location and placement of Vessels, Tanks, Pumps & Concrete Pads of equipment

Piping Designers were responsible for placement of the structural support and the creation of equipment shop drawings of Vessels.

Project was created on AutoCAD 2015, CADWorx Plant and Equipment 2015 and Navisworks 2015 programs.

October 2014 to October 2015

Precision Systems Engineering – Sandy, UT

Sr. 3D Piping Designer / Checker (contract position)

Worked with Engineers to Create Process Piping Models, Orthographic, Isometric(with BOMs) and P&ID drawings for clients of the O&G and Manufacturing Industries.

Began Contract as a Sr. 3D Piping Designer, but was promoted to a Checker Position, then eventually to a Lead Role.

Information for these projects were provided from P&Id’s, Field Surveys and Field Notes.

Projects were completed on AutoCAD, CADWorx, Plant 3D, Navisworks and Vault File Database Management programs.

June 2014 to October 2014

Anvil Corporation – Bellingham, WA

Sr. Civil / Structural Designer (contract position)

Worked with Lead Designers and Engineers to Create 3D Structural Models of Oil Refinery Crude Unit and Coker Unit Projects.

Worked on projects for BP and ConocoPhillips.

Responsibilities consisted of Site Layouts, Composites, 3D Models of Piping & Cable Tray Support, Bridge Crossing Designs, Structural Plans, Sections, Elevations, BOMs, Details and 2D extractions from the model.

Software used on these projects were ProSteel, Civil 3D, Navisworks & AutoCAD.

March 2013 to March 2014

Duke Energy – McGuire Nuclear Plant, NC

Mechanical & Structural Piping Designer (contract position)

Worked as Mechanical Piping Designer tasked to retrofit existing and new piping systems along with their support systems such as the assured air, assured water, secondary pool water level systems, etc. to meet the requirements from the Fukushima Assessment “FLEX” Program for the McGuire Nuclear Power Plant.

Responsibilities included field verification walk downs, P&ID’s, Flow Diagrams, Isometrics, BOMs, Plan Modifications, elevations, details etc.

Software used on this project consisted of Microstation V8 and Decartes.

February 2012 to February 2013

SGT, Crystal River, FL

Sr. Civil / Structural / Piping / Mechanical / Electrical Designer / 3D Modeler (contract position)

Worked with a staff of 35 Engineers of all disciplines as their 3d designer on a project created for the purpose of halting and repairing an on going delamination of the exterior walls of the Reactor building.

Process required the de-tensioning and demolition of the exterior walls while leaving lead lining intact, then to rebuild walls with minimal radioactive leakage. To reach the tension cables embedded in the Reactor building’s walls, knockouts in all the floors of the surrounding buildings were required to be removed and all the existing pipes, cables, raceways, support steel etc. and had to be re-routed in accordance with NRC standards for proper clearance.

Assisted in the engineering of re-routes by building a highly detailed 3d CAD model of the Plant based off of the original CD’s in PDF format. Working from the model, the creation of all the Engineering Changes (EC’s) for the knockout plans and re-routes for the various disciplines were completed. Work was checked against the EC’s and field walk downs and confirmation.

Software used on this project were Microstation V8i and PlantSpace.

October 2011 to February 2012

Intermountain Consumer Professional Engineers, Inc. Midvale, UT

Sr. Piping & Structural Designer (contract position)

Worked closely with Engineers to Conduct an “Expansion of Operations” Feasibility Study of an existing Gold Mining Processing Plant.

Created an “as-built” detailed 3D model of the existing Plant of Operations based from original 2d PDF files.

Designed and integrated the new proposed expansion of, piping and support of a Victaulic lined & grooved sludge pipeline and other various piping systems, such as machinery & equipment layout, platforms, instrument locations, raceways etc. three-dimensionally into the site model.

Created Construction documents, piping information for both cost and engineering (stress & support) analysis

Generated Renderings of the proposed site for the client’s approval.

Self-checking and cross-checking of our work was implemented to assure proper and consistent design.

Software used on this project were AutoCAD and CADWorx.

June 2011 to October 2011

TransMontaigne, Roswell, GA

Sr. Piping Designer (contract position)

Created as-built and design modifications of existing fuel storage terminals based off of field walk downs.

Responsibilities consisted of performing “on-site” field walk-downs of fuel storage sites, to document inventory and create field sketches for P&ID’s, Flow Diagrams, Isometrics w/BOMs, As-Built Site Plans, Evacuation Plans, Inventory and 3D Models, etc.

Other responsibilities consisted of overlaying aerial images, extracted from aerial photography or Google maps into site plans, to create and update various documents such as General Site Layout & Evacuation Plans.

Software used here were AutoCAD, CadWorx & AutoPlant respectively.

January 2011 to June 2011

IS International, Lawrenceville, GA

3d Electrical Designer (contract position)

Created 3D electrical designs & as-built models of an underground water treatment plant located in New York City (The Croton Plant Site).

Extraction from these models consisted of the creation of designs containing conduit layouts, cable bundle labeling, conduit load calculations, raceway, rack & steel support systems, equipment verification elevations, sections, BOMs and details of both the I & C systems and the electrical systems.

Project was drafted and designed extensively in 3D using AutoCAD MEP and Navisworks (for QA, review & clash detection).

January 2009 to May 2010

URENCO / Louisiana Energy Services, (National Enrichment Site) Eunice, NM

3D Modeler / Designer (contract position)

Created the 3D model of a Uranium Enrichment Facility.

Model consisted of all major disciplines incorporated in the facility such as concrete, steel, secondary support steel, transportation systems, HVAC & support, piping & support, cable tray system & support, equipment, instrumentation & control, electrical paneling and sprinkler system & support.

Model was created for the purpose of space management and collision detection for the different combined disciplines.

Responsibilities included identifying clashes between the systems and potential areas of concern within the design, coordinating weekly meetings with engineers and onsite craftsman to discuss and find solutions to any problems and concerns that needed to be addressed, and making progress presentations of the site to the entire staff while working closely with engineers to solve design problems.

Worked “on site” for construction support and conducted field walk downs for design verification of equipment locations and proper configuration.

During “crunch times”, assistance in redline corrections of the CD’s with the CAD engineering department in coordination with QA/QC to track both the history and the progress of the engineering process of the site.

Software used here was AutoCAD, MEP, ProSteel, ProConcrete, CADWorx, Navisworks and Ventyx Suite Solution.

April 2004 to November 2008

Archscapes, LLC

CEO / Owner / CAD Manager / Designer / Drafter / 3D Modeler / Animator / IT

Created a CAD Consulting / Outsourcing Company. Company specialized in creating CD’s while maintaining clients’ CAD Standards and integrity on their different cad packages.

As owner, responsibilities consisted of Salesperson, IT, CAD Manager, Checker, Draftsperson etc.

Created extensive 3D models of client’s structures and created renders and/or animations for presentation purposes.

Clients consisted of many professional fields ranging from Home Building Corporations, to Interior Aircraft Designers.

October 2007 to February 2008

CB&I, Denver, CO

Electrical I & C Designer (contract position)

Created schematic cabling plans, Loop Wiring diagrams, Single Line Drawings and wiring diagrams for various projects while working in the I&C department at Washington Group International (now CB&I).

Assisted in the final design of Piping and Instrument Placement verification of a Low Sulphur Field Condensate Refinery located in Qatar against the CD’s and Vender requirements.

Generated Plans, Bill of Materials and vender verifications of drawings to specification requirements of equipment, information and locations of Piping, Instruments, Sensors, Gages, Valves and other various equipment on the 3d Models.

Created Instrumentation control plan layouts and elevations panel layouts of the Command Center.

Software used to complete these tasks were AutoCAD 2004, CADWorx, Bentley’s Microstation “J”, SmartPlant and AutoPlant CAD packages.

May 2005 to July 2007

AES Clean Technologies, Inc., Buford, GA

Pharmaceutical Clean Room Designer (freelance position)

Company designs turn key clean room environments along with the manufacturing of the wall and “walk-able” ceiling panel systems.

Designed and Created Construction Documents of Clean Rooms and ventilation systems for the Pharmaceutical Industry.

Typical production design layout would consist of construction documents for Wall Paneling Systems, Ceilings Systems (walkable if necessary), Hanger Support Systems (Unistrut) and Complete Ventilation Systems with flow calculations and BOMs.

Software used to complete tasks were AutoCAD, ADT, and Microstation CAD packages.

October 2003 to April 2004

KB Home, Atlanta, GA

Sr. Residential Architectural Draftsperson (freelance position)

Created construction documents of residential housing (single and multi-family) and were responsible for the training of a team of 5 draftspersons along with the checking of their work of the CD’s.

CD’s were based off of sketched designs. Then, delegation of the sketches to one of the team members would take place who would in turn create a full set of cd’s.

Checking of the work for proper design, constructability and code issues took place.

Software used here was exclusively Architectural Desktop (ADT).

May 2003 to August 2003

Eclipse Aviation, Albuquerque, NM

3D Modeler / Renderer (freelance position)

Created, modeled and rendered a 3d model of the Flight Instrumentation Panel Configuration.

Renders were used for various Presentation and Advertising purposes such as Brochures, Posters and Website.

Software used on this project were Unigraphics, AutoCAD and 3D Studio Max.

October 2002 to April 2003

White Shield / Bechtel, Inc., Kennewick, WA

Civil Survey Tech / 3D CAD Operator (contract position)

CAD Support for the Survey crews at the Hanford Waste Treatment Facility Project in Richland, WA, by the creation of the 3d survey point files for the field crews extracted from the existing 3d models of the project were needed.

3D Point files created reflected in real world true 3-dimensional space for the Survey Field Requests.

Point files would be downloaded onto the Trimble Complete Stations for the crews to take into the field to layout the necessary points for construction.

Software used on this project consisted of the conversion and transfer programs created by Trimble and Microstation “J”, Triforma and Terra-Model CAD programs by Bentley.

August 2002 to September 2002

James Westbrook and Associates, Alpharetta, GA

3D Modeler / Renderer (freelance position)

Created, Modeled and rendered a 3-D Model of a Church School Bldg. from 2d floor plans.

Renders created where implemented in their presentation for the client and later for advertising purposes.

Software used on this project were AutoCAD and 3D Studio Max.

June 2002 to July 2002

Architects Design, Lawrenceville, GA

Residential Architectural Designer (freelance position)

Prepared Architectural Construction Documents for a Custom Residential Home in 2D.

CD’s included Footing/Foundation/Basement Plans, Floor Plans, Roof Plan, Electrical Plans, Plumbing Plans, HVAC Plans, Schedules, Detail Sheets, and Elevations.

Software used here was AutoCAD.

April 2002 to June 2002

Nielson Structural Engineers, Atlanta GA

Structural Designer / Drafter (freelance position)

Prepared structural construction documents for Resort Condo / Hotel Communities.

CD’s included Footing/Foundation Plans, Structural Floor Plans, Roof Joist Layouts, Wall Sections, Steel Detailing, BOMs and Weld Schematics; Concrete Rebar Plans & details, Fabrication Drawings and Various other details.

Software used here was AutoCAD and ADT.

July 1999 to November 2001

Pegram Associates, Myrtle Beach SC

Commercial Architectural Designer / 3D Modeler / Renderer / Drafter (contract position)

Prepared Architectural CD’s for High Rise Resort Condo/Hotels, Restaurants, Educational Facilities, Medical Centers, Renovations of an Office Space, Library and Preliminary Plans for a Bell Tower and Children's Museum

Created and rendered 3d models for High Rise Condos, Restaurants, Educational Facility, Bell Tower and Children's Museum.

Software used here were Autodesk’s AutoCAD, 3D Studio Max and Tree Factory programs.

September 1998 to June 1999

Parsons Brinckerhoff Network Services, Golden, Co.

Production Scheduler / Team Leader / Designer / Drafter (contract position)

Production Scheduler of a large CAD Department for a 17,000 mile National Underground Fiber Optic Network System in bundle form.

Bundled Conduits consisted of 12-3" Conduits.

Project entailed Digitizing Val Maps, Transferring Field and GIS Surveys onto a Real World Digitized National Map.

Packaged Sections were broken down to approx. 25 mi., and released for Permitting and then Construction.

Responsibilities required the distribution of 25 mi. sections to 5 Job Captains, then ramp-up & down the manpower (CAD Operators) as the sections progressed, then re-assign the CAD operators and Captains to the next section and check their work for QA/QC.

Placement of CAD Operators required the assessment and assignment of a department of 42 draftsman according to each individuals drafting strong points and wishes.

During my time as Production Scheduler, man-hours to complete the work were reduced from an average of over 21 man-hours per mile to less than 6.

Software used here consisted of Microstation SE, Iris B & C, Small world, Inroads and Draftworks.

April 1998 to September 1998

Barge, Waggoner, Sumner, & Cannon, Nashville, Tenn.

Restaurant Architectural Designer / Operator (contract position)

Prepared multiple prototypical Architectural Designs of Small Town “3-in-1” Taco Bells, Pizza Huts and Kentucky Fried Chickens.

A typical set of plans included Foundation Plans, Floor Plans, Kitchen Equipment Layout Plans, Electrical Plans, HVAC Plans, Plumbing Plans, Seating Plans, Exterior Elevations, Interior Elevations, Roof Plans, Reflective Ceiling Plans, Schedules, Details, and General Notes.

Software used here was AutoCAD Rel. 13c4 for Windows.

November 1997 to April 1998

Willbros Engineers Inc. Tulsa, Ok.

Pipeline CADD Operator (contract position)

Prepared Permit, Hydrostatic, & Construction Documents consisting of GA’s, Piping Layouts, Support Systems, Site Plans & Profiles, Sections, Details and Environmental Waste Plans for Water Crossings of a 36" Natural Gas Pipeline.

Plans were laid out over aerial photography and survey plats.

Pipeline originated in Canada and ran south through Iowa, then east towards the Chicago Ill. Metropolitan area.

Software used here was Microstation 95, MBI, IRAS and DM Manager.

January 1997 to November 1997

Wakefield, Beasley and Associates, Norcross, Ga.

Commercial Architectural Designer / Drafter (contract position)

Prepared Construction Documents for High End Residential Custom Homes, Office Buildings, Warehouses, Hotels and Parking Decks.

Typical Responsibilities consisted of preparing Site Plans / Property Layout Sheets, Floor Plans, Roof Plans, Elevations, Sections, Schedules and Detail Sheets.

Software used here was AutoCAD 12 for Windows and Soft desk’s Auto-Architect.

October 1996 to January 1997

Applied Science and Engineering, Chamblee, Ga.

Civil Draftsman (contract position)

Prepared Construction Documents for a Train Refueling Depot.

Responsibilities consisted of preparing General Notes, GA’s, Site Plans, Rail Layout, Piping Layouts, Steel Support, Plan & Profiles, Sections and Detail Sheets.

Software used here was AutoCAD 12 for Windows.

May 1995 to October 1996

Builder Services Group, Norcross, Ga.

Residential Architectural Designer / Drafter (contract position)

Prepared Construction Documents of Custom Residential Houses for local Home Builders in the Atlanta Metro Area.

Responsibilities consisted of designing Home Layouts, Generating Construction Drawings and overseeing the Construction of the Houses. Construction Documents included General Notes, Foundation Plans, Roof Plans, Elevations, Sections, Floor Joist Plans, Wall Stud Layout Plans, Schedules, Bill of Materials, 3D-Roof Joist Plans, Electrical Plans, HVAC Plans, Plumbing Plans and Detail Sheets.

Performed In-Field Inspections and Confirmation of the Construction Sites.

Software used here was AutoCAD 13c4 for Windows, Soft desk’s Auto-Architect and Arch-T.

February 1995 to May 1995

Environmental Science and Engineering, Smyrna, Ga.

Environmental CAD Operator (contract position)

Prepared Environmental Soil Analysis Site Plan Drawings of Contaminated Sites for Corporate Petroleum Refueling Landmarks (Gas Stations).

Drawings included Soil Sample Results, Graphics and Pollution Density Stratification Drawings and Demo plans.

Software used here was AutoCAD 12 for Windows and 13c4.

September 1994 to January 1995

Robert H. Lee and Associates, Smyrna, Ga.

Job Captain / Petroleum Architectural Designer / Drafter (contract position)

Organized and prepared CD’s of Corporate Petroleum Refueling Landmarks (Gas Stations, Truck Stops, etc.).

Responsibilities consisted of acquiring Construction Permits, organizing Demolition and Construction Documents of the Construction Sites.

Software used here was AutoCAD 12 for Windows and Accurender 1.0.

June 1994 to September 1994

Prime Engineering, Atlanta, Ga.

Civil Draftsperson (contract position)

Prepared Civil CD’s for Airport Fuel Storage Facilities, Waste Water Treatment Plants, Water Drainage Systems and Parking Lots.

Responsibilities consisted of producing General Notes, GA’s, Topographical Site Plans, Plan & Profile, Sections, Construction Details and Diagrams.

Software used here was AutoCAD 12 for Windows, Soft desk’s Survey, COGO and DTM.

October 1993 to June 1994

The GEDCO Group, Smyrna, Ga.

Architectural Designer / Draftsman (full time employee)

Prepared Construction Documents for Freezer Warehouses and Corporate Office/Research & Development Center.

Responsibilities consisted of generating General Notes, Site Plans, Foundation Plans, Floor Plans, Electrical Plans, HVAC Plans, Elevations, Interior and Exterior Schedules. Roof Plans, Section Sheets and Detail Sheets.

Software used here was AutoCAD 12 for Windows.

July 1993 to October 1993

OHM Corp., Norcross, Ga.

Civil CADD Operator (contract position)

Preparation of Construction Documents of Remedial Facilities, Water Treatment Plants, Water Detention Ponds and Water Drainage Systems.

Responsibilities consisted of generating General Notes, GA’s. Topographical Site Plans, Drainage Piping Plan & Profiles and Details.

Software used here was AutoCAD 12 for Windows.

September 1989 to January 1993

Southern Engineering Company, Atlanta, Ga.

Electric Transmission / Distribution CAD Operator (in house) / Stake Surveyor (in field) / CAD Manager (in field) (full time employee)

Prepared Construction Documents for Transmission / Distribution Power Lines. Responsibilities consisted of creating General Notes, Topographical Site Plans, Stress Calculations, Plan & Profiles and Construction Details in the office.

Completed the revamping and updating of the Tennessee Valley Public Power Authority Spec. Manual, which consisted of everything from pole configurations & construction installation standards, to ROW Standards all within NEC codes totaling approx. 400 Pgs. In the field,

Surveyed, staked and prepared Construction Documents for the replacement and relocation of power distribution lines (both OH and UG).

Organized, Created, trained, and ran the clients CAD department from ground up and converted existing drawings from paper, to electronic CAD files.

Software used here was Intergraph Rel. 4, AutoCAD 10 to 12 for Windows.

October 1987 to August 1989

Burnup and Simms Telecommunications Inc., Norcross, Ga.

Telecommunications CAD Operator / Assistant Manager (full time employee)

Prepared Construction Documents of Telecommunications Systems, Alarm Systems, LAN’s and WAN’s. Typical CD’s consisted of Floor plans, Raceway Layouts, Schematics, Elevations, Loop Diagrams, Details and General notes.

Performed Walk-downs of Metropolitan Atlanta Rapid Transit Authority (MARTA) Subway Stations’ Telecommunication System, which I would generate Field Notes of existing plans, elevations, equipment layouts, Schedules and Schematics of these systems.

During down time, created an extensive Detail Library (both 2D and 3D) of equipment.

Software used here was AutoCAD 9 and 10.

May 1987 to October 1987

Balin Institute of Technology, Atlanta, Ga.

Assistant Trainer / Recruiter (part time employee)

Originally a student here, I was offered a position at Balin to assist in training students on both AutoCAD 9 and VersaCAD upon graduation.

Attended Job Fairs to assist in the recruitment of new students by demonstrating the abilities of AutoCAD (both in 2D and 3D applications) by talking to prospective students about the profession of drafting / design.


Hermitage Vo-Tech, Richmond, Va.

Major: Mechanical / Architectural Drafting

Akers Computerized Learning Center, Sandy Springs, Ga.

Certificate in BASIC Computer Language

Certificate in COBOL Computer Language

Certificate in FORTRAN Computer Language

Southern Polytechnic State University (Southern tech), Marietta, Ga.

Advanced studies in Architectural / Civil Engineering Technology

Balin Institute Of Technology, Atlanta, Ga.

Associates Degree in Mechanical Drafting / Design

Associates Degree in Architectural Drafting / Design

Associates Degree in Computer Aided Drafting & Design

Advanced 3d Studio Max Productivity Course

Taught by Ted Boardman (author of 3D Studio Max Fundamentals Series books)

UGS Certification Training for NX – “Practical Applications of NX” Course – TR10050 (August 2007)

Contact this candidate