Engineer Machine

PRINCESS D. CASTRO

ADDRESS: Lot ** Block ** Arabella Homes Pulo, Cabuyao, Laguna 4025

PHONE: +639********* and +639*********

EMAIL: **********.******@*****.*** / ************@*****.***

OBJECTIVE Looking for a position that acquired skills and technical knowledge will be utilized towards continuous growth and advancement and also provide opportunity to learn new technologies. Sharing my skills and technical knowledge and accomplish success.

SUMMARY OF QUALIFICATION

Extensive experience on Manufacturing / Production operations

Extensive exposure in Camera Module Actuator/ Voice and Video Coil Motor /Optical Image Stabilization and Magnetic Heads Assembly and Test

Expert o Machine set-up / Line set-up or Machine buy-off.

Experienced in managing people, team player, efficient-learner and knowledgeable to effective solutions specially Process and Test Engineering Team.

Analyze Assembly and Test performance through yield and failure monitoring using Statistical Process Control (SPC) rule and provide necessary Corrective and Preventive measures.

Supervise tester qualification using Gage Repeatability and Reproducibility (GRR) and Correlation.

Develop Tester algorithms, software, and hardware to enhance cycle time and data analysis capabilities.

Performs New Projects/Product Introduction set-up and qualification.

Provide either direct or functional supervision or training to other Engineer, Technician and operators.

Trains engineers, technicians and operators on machine qualification through quality data check and analysis as well as hands-on training of newly hired operators and develop training materials and it samples.

IMPROVEMENT / CONTRIBUTIONS

Successfully designed/developed tester, incorporate manual scanning to tester for an auto scanning.

Improve UPH of Camera Module testing from 70 ~ 85 pieces per hour.

Reduced Tester probe/pin consumption by conducting operator training.

Decreased consumption by 5%

Successfully designed/developed pick and place nozzle cleaning/purging.

Improve yield by 2%, contamination on die/chip decreased.

Successfully developed Testing file consolidation and data gathering.

Easily tabulate data for fast analysis of failures.

Provide a proto type jig for manual application of epoxy/glue or manual encapsulation.

CAREER SUMMARY

NIDEC PHILIPPINES CORPORATION

Senior Supervisor (October 2018~ Present)

Ultra Fast Fan / Spindle Motor

Project leader for UFF (Ultra Fast Fan) for CPU's / Laptop, servers and cars.

Leads machine buy-off, decide CTB (Critical to Build) machine and Processes.

Introduce new product technology.

Provide both Micro /Macro schedule of Production build from Proto type up to Ramp up.

Design production concept and create necessary documentations.

Sustain mass production line and improve machine uptime and utilization.

Provide CTQ (Close to Quality) data for customer.

CIRTEK ADVANCED TECHNOLOGIES SOLUTIONS INCORPORATED

RF Process and Test Engineer (October 2017~ September 2018)

Wireless Antenna (LTE) Assembly and Test

Performs New Projects Introduction set-up, qualification and up to mass production stage.

Provides training – testing/tuning/troubleshooting and circuit diagram briefing to new technicians.

Works on the procurement of new tools and equipment needed for building and testing products.

Reviews build yields and Pareto’s regularly. Work with various program team members in analyzing and improving yield using SPC (Statistical Process Control).

Leads in setting up test stations needed for expansion or support of products. Commissions and maintains these test stations. Knowledgeable in the function and operation of RF and microwave circuits and devices.

Knowledgeable on the characteristics, function and operation of RF test equipment and accessories

Provides technical analyses/reports for RMAs and low yielding products

TDK Philippines Corporation

Process and Test Engineer 3 (March 2005 ~ September 2017)

Camera Module Actuator/ Voice and Video Coil Motor /Optical Image Stabilization and Magnetic Heads Assembly and Test

Supervise Process and Test Engineering Team during NPI period up to Mass production stage.

Coordinates with and gives feedback to suppliers, vendors, customers and design persons-in charge regarding design or machine failures and proposals

Aid engineering during the DVT testing and Provide Design for Manufacturability (DFM).

Evaluates, optimized procedures for materials, process, testers /testing methodology to minimize test time.

Sustain mass production line and improve machine uptime and utilization.

Monitors consumable parts/consumption and control, provide necessary improvements..

Improved process and developed criteria to eliminate transients on testers and programs to ensure product quality. Conducts statistical analysis on critical parameters defined on the process.

Prepare Data package requested by the customer.

Released Daily and Weekly Accomplishment Report.

Fujitsu Computer Corporation of the Philippines

Process and Development Technician (January 1997~ February 2005)

(Wafer Fabrication and Magnetic Head Assembly)

Tabulate data from HPGL Gram load, Dage thru Wire full, Peel and Shear Strength as daily machine qualification.

Initiate analysis and provide CA/PA to improve wire bonding and die attached yield.

Resolve issues relating to line stoppages or lot put on hold. Verify defective products/units and disposition them accordingly.

Communicate for equipment spares and auxiliary materials to responsible team.

Initiate process simplification, equipment modification, tools and improvised fixture to improve productivity, efficiency, quality and cost.

Perform evaluation for new model, technology and new project up to mass production period.

Performs other task that may be assigned by the superior.

SKILLS AND INTEREST

Computer Skills

Microsoft Word, Power Point, Excel / Pivot Table and Adobe Photo shop expert

JMP Application / Mini Tab and Synergy expert

SAP / MES user

C / C++ Application, GUI program and LabView user

Analytical

Knowledge to conduct DOE (Design of Experiment)

FMEA (Failure Mode and Effect Analysis)

Applying 7 QC Tools

DMAIC (Define Measure Analyze Improve and Control)

CPK (Process Capability) and SPC (Statistical Process Control)

Root Cause Analysis and 8D methodology

Miscellaneous and Machines

Knowledge on ICT (In-Circuit Testing)

Expert on Resonance and Frequency Tester

Expert on OIS Motion Testers (X/Y Motion tester)

Expert on Auto Focus Testing machine (Z-measurement)

Expert using Spectrum Analyzer, High Performance Scope like NH3 Profile measuring tool, quick vision, DAGE and Vertex, Oscilloscope, Kaelus PIM Analyzer and Vector Network Analyzer

Expert on Pick and Place, Tape and Reel Machines

Expert on Solder Ball Mounting and Wire Bonding Machine

Expert in Die Dispensing Machine

Expert in Laser Marking Machine

Expert in Laser Press fit or Docking Machine

User of CNC Machine

Good communication and presentation skills

Self-driven and results oriented.

Team player with a high sense of urgency

EDUCATIONAL BACKGROUND

Manuel S. Enverga University Foundation

Bachelor of Science in Industrial Engineering

Date Graduated: June 2013

University of Perpetual Help Binan Laguna

Bachelor of Science in Industrial Engineering

1995~1996

TRAINING / SEMINAR / CERTIFICATION

Camera Module New Project Benchmarking

Conducted in Xiamen China

Date: May 01-05, 2016

Optical Image Stabilization Technology Transfer Training

Conducted in TDK Yangmei Taiwan

Date: June 01-13, 2015

iHS Technology and Process Qualification Training

Slider Dynamic Testing Pick and Place Machine

Conducted in SAE DonnguanGuandong China

April 26 ~ May 15, 2010

DOE Training by SEIPI

Conducted by: Mr. Peter Awayan

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: April 2017

Job Hazard Analysis by SAFETY HOUSE INC. / HIRADC by SAFETY HOUSE INC.

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: October 10, 2014

Root Cause Analysis by Arnold David

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: August 28 to September 02, 2011

ISO 9001-14001 and OHSAS 18001 Seminar

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: November 05~06, 2008

PERSONAL DATA

BIRTHDATE November 5, 1977

NATIONALITY Filipino

MARITAL STATUS Single

SEX Female

CHARACTER REFERENCES

Available upon request

Contact this candidate