Resume

Sign in

Mechanical Engineer Project

Location:
Doha, Doha, Qatar
Salary:
15,000 QR
Posted:
January 22, 2019

Contact this candidate

Resume:

MARTIN P. ESPADA RME, B.Sc. Mechanical Engineering

My email address: ac79go@r.postjobfree.com

My contact # +242*********/+974********

My Skype ID: martin_espada

OBJECTIVE:

To utilized my knowledge, skills, ideas and attitude in interesting and challenging project, as a Senior Mechanical Engineer to bring progress and advancement to the company that I will work for.

EDUCATION:

University of San Agustin 1993 to 1998

B.S. in Mechanical Engineering

PROFESSIONAL QUALIFICATIONS:

* Mechanical Engineer in Profession, HVAC, Fire Fighting and Plumbing Engineering Field of Experience including Building Management System (BMS) and Fire Alarm application, project management, supervision and practice.

More than 20 years of experience in Mechanical Profession

Registered member of Society of Fire Protection Engineer (SFPE) with ID No. LM0136

Registered member of Philippine Society of Mechanical Engineer (PSME) Qatar with ID No. 103228

Registered member of Saudi Council of Engineers (SCE) issued under Royal Decree M/36 dated 26/09/1423H as Mechanical Engineer Degree with Membership ID No. 74549

Board Passed: Registered Mechanical Engineer (RME) with ID No. 054198

Mechanical Engineering Field Profession and Practiced

Project Engineering, Management, Consultancy, Design, QA/QC, Value Engineering, Supervision, Inspection, Service, Maintenance and Technical Job

*Active, Dedicated and Life Member:

Philippine Society of Mechanical Engineers

Institute of Integrated Association of Mechanical Engineers of the Philippines, Inc. Iloilo Chapter under the provisions of Commonwealth Act No. 294 as amended and Presidential Decree No. 223

Institute of Integrated Association of Mechanical Engineers Accredited National Organization, Certificate No. I-AP0-005 in Riyadh, KSA Chapter (Central Region) member ID No. 85990

Philippine Regulation Commission (PRC) Certificate and ID No. 054198

Society of would be Engineer’s (Iloilo Chapter) (Mechanical Engineering Profession) Member ID No. 96-0203

*Professional Work Experiences:

Project management, supervision, testing and commissioning, design, value engineering, quality assurance/quality control, construction, maintenance, service and production

*Employment Record As

Senior MEP Testing and Commissioning Engineer

Senior Mechanical Engineer (Contracting and Consulting Firm)

Mechanical Engineer

Project Mechanical Consultant

Quality Assurance / Quality Control Engineer

Project Engineer

Service Engineer

Maintenance Engineer

Technical Service Engineer

PROFESSIONAL EXPERIENCE:

Company: DEWAN Architect+Engineers

Term: December 16, 2018 to January 31, 2019

Position: Senior Mechanical Engineer (Project Management and Supervision)

Office Address: Brazzaville, Republic of Congo, Africa

Nature of Business: Consulting Firm

Duties and Responsibilities:

1)Review the Master Schedule of the Project.

2)Review all Works Schedule based on the Contract Duration.

3)Assuring that submitted Shop Drawing, Materials, Samples and Equipments are in accordance with

Contract documents.

4)Review Mechanical Engineering design submittals for the Design drawing, Bill of Quantity &

Specifications.

5)Performing all site Inspections, testing and commissioning of works, systems, etc.

6)Responsible for Project execution, supervision & control of manpower in completing works of the

Contractor, Sub-contractor, etc... Performing at site.

7)Responsible for Submission Monthly Status Report (Mechanical)-Shop Drawing and Construction

Materials.

8)Responsible to oversee and check all materials & equipments delivered at site with (MRI) documents.

a) Materials & equipments delivered and received/accepted without damage and correct based on

Specifications and Approved Material Submittal for quality and quantity.

9)Responsible to oversee that all materials and plans are timely delivered on site in order, to avoid delay

in completion of its Mechanical works.

10)Performing inspection of installation and monitoring phase of quality control of work as per standards

Project specifications and based on shop drawing details supported with RFI or CRI documents.

11)Keep on recording and file approved, re-submitted and rejected Shop Drawings & Materials.

12)Reviewing contractor's progress billings & submitting recommendation to the Project Manager.

13)Ensuring that Contractor's (Mechanical Personnel) work forces are competent professional & skilled.

14)Ensuring that the works are done in compliance with the project specification, applicable standard

code and Clients requirements.

15)Continuous periodic field supervision of all works with full documentation of Mechanical construction

and daily status quality assessment.

16)Establishing documents filing procedures for project drawings/specifications/bill of quantity and

revision to the same shop drawings site instructions, samples, correspondence, forms and reports to PM.

17)Establishing, attending and managing site meetings (For Mechanical & Project Management).

18)Ascertaining contractor's monthly progress percentage.

19)Review & Compare of actual progress with the originally planned as approved schedule.

20)Perform other task assigned by project management from time to time.

Project Assignments:

1)Kempinski 5 star Hotel Project, B+LG+G+MEZ+12F+LR+UR Building, Amilcar Cabral Avenue, Brazzaville,

Republic of Congo, Africa.

Company: ALYSJ-JV Goldline Metropolitan Railway Company

Term: June 25, 2018 to October 31, 2018

Position: Senior MEP Testing and Commissioning Engineer

Office Address: Al Waab St., Doha, State of Qatar

Nature of Business: Joint Venture Contracting Firm

Duties and Responsibilities:

1)Leads the Testing and Commissioning (T & C) team for an assigned Stations for Doha Metro Rail Gold Line Project.

2)Assists in the development of T & C procedures, specifications, test documents, etc…

3)Manages the assigned Station’s T & C activities, T and C meetings, reviews/accepts the T and C reports and coordinates the start of the performance testing.

4)Heads on over-all T & C activities, T & C Engineers/Inspectors, T & C Subcontractors and staff when conducting PSAT, SAT and SIT activities in my station.

5)Provide status of activities, manages the schedule in close coordination with the Station’s Construction and MEP Engineer’s.

6)Notifies T and C Manager and Area Coordinator on upcoming T and C activities.

7)Implement and manage the T and C of equipment, systems and sub-system of assigned station.

8)Coordinate and manage the T and C activities within the MEP Department and T and C subcontractors to ensure an integrated approach to the T and C works in assigned station’s

9)Perform other task assigned by project management from time to time.

Project Assignments:

Metro Rail Gold Line Project, Testing and Commissioning Works, Sports City Station, Al Waab Road, Doha, Qatar.

Company: MZ and Partners Architectural and Engineering Consultancy

Term: March 15, 2014 to June 15, 2018

Position: Senior Mechanical Engineer (Project Management and Supervision)

Office Address: Frij Bin Mahmoud Street, Doha, State of Qatar

Nature of Business: Consulting Firm

Duties and Responsibilities:

1)Review the Master Schedule of the Project.

2)Review all Works Schedule based on the Contract Duration.

3)Assuring that submitted Shop Drawing, Material Samples and Equipments are in accordance with

Contract documents.

4)Review Mechanical Engineering design submittals for the Design drawing, Bill of Quantity &

Specifications.

5)Performing all Inspections, testing and commissioning of works, systems, etc.

6)Responsible for Project execution, supervision & control of manpower in completing works of the

Contractor, Sub-contractor, etc... performing at site.

7)Responsible for Submission Monthly Status Report (Mechanical)-Shop Drawing and Construction

Materials.

8)Responsible to oversee and check all materials & equipments delivered at site with (MRI) documents.

a) Materials & equipments delivered and received/accepted without damage and correct based on

Specifications for quality and quantity.

9)Responsible to oversee that all materials and plans are timely delivered on site in order, to avoid delay

in completion of its Mechanical works.

10)Performing inspection of installation and monitoring phase of quality control of work as per standards

specifications and based on shop drawing details supported with RFI or CRI documents.

11)Keep on recording and file approved, re-submitted and rejected Shop Drawings & Materials.

12)Reviewing contractor's progress billings & submitting recommendation to the Project Manager.

13)Ensuring that Contractor's (Mechanical Personnel) work forces are competent professional & skilled.

14)Ensuring that the works are done in compliance with the project specification, applicable standard

code and Clients requirements.

15)Continuous periodic field supervision of all works with full documentation of Mechanical construction

and daily status quality assessment.

16)Establishing documents filing procedures for project drawings/specifications/bill of quantity and

revision to the same shop drawings site instructions, samples, correspondence, forms and reports to PM.

17)Establishing, attending and managing site meetings (For Mechanical & Project Management).

18)Ascertaining contractor's monthly progress percentage.

19)Review & Compare of actual progress with the originally planned as approved schedule.

20)Perform other task assigned by project management from time to time.

Project Assignments:

2)12 Hangar & Workshop Project, Qatar Armed Forces Hangar & Facilities Project, Duhaliyat Area, Qatar

3)Al Nassem Tower, (2B+G+21+LR+UR) Al Kharaej Residential/19, Lu Sail, Qatar

4)New Community Center, Qatar Petroleum Dukhan Recreation Project (G+2+R+UR) Dukhan, Qatar

5)Dunes Hotel (2B+G+21+R), West Bay, Doha, Qatar

Modification for Two (02) Basement + Ground Floor + Third Floor

6)Moon Island, Al Misnad Palace (B+G+1+R) The Pearl, West Bay, Doha, Qatar

7)Msheireib Downtown Doha Project (B+G+3+R) Msheireib Downtown Area, Al Rayyan, Doha, Qatar

8)Al Darwish Residential Tower Project (3B+G+34+R) West Bay, Doha Qatar

9)50 Luxury Villas Project (G+1+P+UR) Lu Sail City, Qatar

10)Al Shahad Residential Tower Project (3B+G+38+R) West Bay, Doha Qatar

11)Hala Residential Hotel Tower Project (4B+G+42+R) West Bay, Doha Qatar

12)24 Luxury Villas Project (G+1+R), Sheik Hamad Bin Suhaim Al Thani, Al Rayyan, Doha, Qatar

13)FNAC and Young World Store, Lagoona Mall Project, The Pearl, Doha, Qatar

14)Reiss Boutique, Landmark Mall Project, Al Markhiya, Doha, Qatar

Company: AD Engineering Consultant, Riyadh City, Kingdom of Saudi Arabia

Term: June 01, 2009 to November 15, 2013

Position: Senior Mechanical Engineer (Project Management, Design, Value Engineering and Supervision)

Office Address: King Fahad Road, Riyadh City, Kingdom of Saudi Arabia

Nature of Business: Consulting Firm

Duties and Responsibilities:

1)Review the Master Schedule of the Project.

2)Review all Works Schedule based on the Contract Duration.

3)Assuring that submitted Shop Drawing, Material Samples and Equipments are in accordance with

Contract documents.

4)Performing value engineering to perform value engineering studies and analysis.

5)Conduct Design for Mechanical (Plumbing, HVAC and Fire Fighting) tender design drawing

Lay-out for every assign project.

6)Review Mechanical Engineering design submittals for the Design drawing, Bill of Quantity &

Specifications.

7)Responsible for Project execution, supervision & control of manpower in completing works of the

Contractor.

8)Responsible for Submission Monthly Status Report (Mechanical)-Shop Drawing and Construction

Materials.

9)Responsible to oversee and check all materials & equipments delivered at site with (MRI) documents.

a) Materials & equipments delivered and received/accepted without damage and correct based on

Specifications for quality and quantity.

10)Responsible to oversee that all materials and plans are timely delivered on site in order, to avoid delay

in completion of its Mechanical works.

11)Performing inspection of installation and monitoring phase of quality control of work as per standards

specifications and based on shop drawing details supported with RFI or CRI documents.

12)Keep on recording and file approved, re-submitted and rejected Shop Drawings & Materials.

13)Reviewing contractor's progress billings & submitting recommendation to the Project Manager.

14)Ensuring that Contractor's (Mechanical Personnel) work forces are competent professional & skilled.

15)Ensuring that the works are done in compliance with the project specification, applicable standard

code and Clients requirements.

16)Continuous periodic field supervision of all works with full documentation of Mechanical construction

and daily status quality assessment.

17)Establishing documents filing procedures for project drawings/specifications/bill of quantity and

revision to the same shop drawings site instructions, samples, correspondence, forms and reports to PM.

18)Establishing, attending and managing site meetings (For Mechanical & Project Management).

19)Ascertaining contractor's monthly progress percentage.

20)Review & Compare of actual progress with the originally planned as approved schedule.

21)Performing Technical Review comments on Contract Design Drawing and Contractor's submitted

Drawings.

22)Perform other task assigned by project management from time to time.

Project Assignments:

1)Al Megairin Tower, 3B+G+35Typ.+R+HP, Riyadh, Kingdom of Saudi Arabia (Private Business Project) Design and Value Engineering Job.

2)Al Rihab Villas, 290 Luxury Villa, G+1+R, Riyadh, Kingdom of Saudi Arabia (Private Luxury Villas Project) Supervision and Value Engineering Job.

3)Wadi Laban Palace, 9 Luxury Villa = G+1+R, Riyadh, Kingdom of Saudi Arabia (Palace for Prince Project) Supervision Job.

4)Najran Administrative Twin Tower Bldg,G+13+R, Najran, Kingdom Of Saudi Arabia (Ministry of Education Project) Supervision Job.

5)Sudair City Infrastructure Project, (Under Jurong Design Consultant) Mechanical and Plumbing Piping Installation Design, Sudair, Kingdom of Saudi Arabia (Private Infrastructure Project) Design and Value Engineering Job.

6)Ar Rub’ Al Khali Border Port K.S.A. 300+, G+1+R, Horizontal Bldg. Oman Border (Ministry of Finance Project) Supervision Job.

7)Al Juof University (College of Pharmacy), 9 Bldg. G+2+R and G+3+R Horizontal Bldg. Gama, Al Jouf, Kingdom of Saudi Arabia (Ministry of Education Project) Supervision Job.

8)Saudi Food and Drugs Authority (SFDA) Office and Laboratory Horizontal Building, Kassim, Madina and Jeddah, Kingdom of Saudi Arabia (Private Building Project) Design Job.

9)Muteen Project for Industrial Gate City – 2 Project, Mechanical, Fire Fighting and Plumbing Piping Installation Design, Industrial City-2, Riyadh, Kingdom of Saudi Arabia (Private Infrastructure Project) Design and Value Engineering Job.

10)Al Hareq Project, Infrastructure and Sports Club construction, Al Hareq, Kingdom of Saudi Arabia (Ministry of Defense and Authority Project) Supervision Job.

11)Al Sahli Villa, G+1+R, Residential Luxury Villa, Riyadh, Kingdom of Saudi Arabia (Private Luxury Villas Project) Design Job.

12)Engr. Hummoud Al Salmi Villa, 2 G+1+R, Residential Luxury Villa, Riyadh, Kingdom of Saudi Arabia (Private Luxury Villas Project) Design and Supervision Job.

13)Othaishan Villa, G+1+R, Residential Luxury Villa, Riyadh, Kingdom of Saudi Arabia (Private Luxury Villas Project) Design Job.

14)Al Nussayan Hotel, G+2+R Horizontal Building, Riyadh, Kingdom of Saudi Arabia (Private Hotel Project) Design Job.

Company: Trust Arabiah MEP Contractor Company Inc. Sharjah, U.A.E.

Term: December 2008 to April 2009

Position: Senior Mechanical Engineer (Design and Supervision)

Office Address: Flat 702, Public Discount Center Bldg. Al Rolla St. Sharjah, U.A.E.

Nature of Business: Contracting of Mechanical, Electrical and Plumbing Services

Duties and Responsibilities:

1)In-charge of all technical works, Qa/Qc standard procedure and applications, project and site activities in the whole project sites.

2)In-charge to all Engr’s. working at site and office works (Project Engr., Design Engr., Qa/Qc Engr. and Site Engr.).

3)Extensive background to all design drawings versus the actual installation at project site and for consultant approval (shop, coordination and design) (HVAC, Plumbing and Fire Fighting).

4)Responsible for all requisition of machines requirements, equipment and materials needed to project sites as per specification and standards for final approval of the Consultant.

5)Performing inspection of the installation and monitoring the phases of quality control of work as per specifications and shop drawing details.

6)Liaise with the Consultants/Client’s Representative for the quality control inspections, activities, and testing.

7)Coordinate with the consultants, project and site engineer with regards to execution and rectification of works error.

8)Establishing, activating and managing the Project Quality Plan with the Managing Director.

9)Coordinates the works and check for the clearances with all the services for smooth flow, execution and planning on site.

10)Check the records of all subcontractors’ accomplishment for billing purposes.

11)Perform other task assigned by project management from time to time.

Project Assignments:

1)Arabian Group, Moon Tower (3B+G+3P+16Typ.), Business Bay, Dubai, U.A.E.

2)Hajiree Tower, G+5P+15Typ+2HP., Al Nadah, Sharjah, U.A.E.

3)Kajoor Tower, G+4P+10Typ., Al Roola, Sharjah, U.A.E.

4)Mohammad Kadrei Tower, G+2M+30Typ., Sheik Khalifa Ave., Ajman, U.A.E.

5)Mohammad Nessar Tower, G+2M+13Typ., Sheik Khalifa Ave., Ajman, U.A.E.

6)Hotel Project, G+5P+19Typ., Fujiera, U.A.E.

7)Hotel Project, G+2M+25Typ., Fujiera, U.A.E.

8)Al Amarak Chemicals Factory, G+M, Fujiera, U.A.E.

Company: Alphanoor Electromechanical Works, L.L.C. Dubai, U.A.E.

Term: January 2008 to December 2008

Position: Mechanical Project Engineer

Office Address: 4th Interchange, Al Quos, Dubai, U.A.E.

Nature of Business: Contracting of Mechanical, Electrical and Plumbing Service

Duties and Responsibilities:

1)Extensive background to all design drawing (HVAC, Plumbing and Fire Fighting), mechanical technical submittal, Qa/Qc standard procedure, project and site activities in the whole project area.

2)Responsible for all mechanical drawings versus the actual installation at project site (shop, coordination and design) and for consultant approval.

3)Responsible for all requisition of mechanical machines, equipment and materials needed to project site as per specification and standards for final approval of the Consultant.

4)Performing inspection of mechanical machines, equipment and materials arriving at site prior to final inspection of the Consultant.

5)Performing inspection of the installation and monitoring the phases of quality control of work as per specifications and shop drawing details.

6)Prepare MEP daily progress report and any other technical report as necessary.

7)Liaise with the Consultants/Client’s Representative for the quality control inspections, activities, and testing. Then, provide the corresponding QC documents in accordance with the Inspection and Test Plan as per the QC procedures.

8)Coordinate with the consultants and site engineer with regards to execution and rectification of works error.

9)Coordinates the works and check for the clearances with all the services for smooth flow, execution and planning on site.

10)Evaluate subcontractor’s accomplishment for billing purposes.

11)Perform other task assigned by construction and project management from time to time.

Project Assignment:

Damac Properties, Emirates Garden - 2 “3 Bldg.” (B+G+4) Developed by: NAKHEEL – Jumeirah Village, Dubai, U.A.E.

Company: Alphanoor Electromechanical Works, L.L.C. Dubai, U.A.E.

Term: November 2006 to December 2007

Position: Mechanical QA / QC Engineer

Office Address: 4th Interchange, Al Quos, Dubai, U.A.E.

Nature of Business: Contracting of Mechanical, Electrical and Plumbing Services

Duties and Responsibilities:

1)Liaise with the Consultants/Client’s Representative for the quality control inspections, activities, and testing. Then, provide the corresponding QC documents in accordance with the Inspection and Test Plan as per the QC procedures.

2)Establishing, activating and managing the Project Quality Plan with the Project Manager and Senior Engineers.

3)Performing inspection of plumbing materials arriving at site prior to final inspection of the Consultant.

4)Performing inspection of the installation and monitoring the phases of quality control of work as per specifications and shop drawing details.

5)Reviewing result of test and inspections and advising the contractor and sub-contractor of the status of acceptance.

6)Ensure that the corrective actions taken for the non-conformances are implemented properly.

7)Issue Non-Conformance Reports when the specification or procedural requirements are not met.

8)Issue Quality Inspection Reports if the work is not within the standards of quality.

9)Monitors and ensures that the contractor and sub-contractor are documenting all inspections and tests on pro-forma as required by the project quality plan.

10)Compiling data for input to the QC Reports.

11)Ensure that the works are done in compliance with the project specifications, applicable standards, and Client’s requirements.

12)Perform other task assigned by construction and project management from time to time.

Project Assignment:

Green Community West Project, 580 Villas and 16 Apartments Bldg. (G+3), Developed by: Union Properties – Dubai Investment Park, Jebel Ali

Company: A.H. Lambert Mechanical Engineering and Services

Term: August 2003 to September 2006

Position: Mechanical Project Inspector (Consultant)–Mechanical Engineering Department

Office Address: 2nd Floor Dominique Mall Aldeguer Street, Iloilo City, Philippines

Nature of Business: Consulting Firm

Duties and Responsibilities:

1)Responsible for all inspection of materials arriving at site as per specification, standards and approved data.

2)Performing inspection of installation and monitoring phases of quality control of work as per specifications and standards based on shop design drawing details.

3)Responsible and performing inspections to all mechanical shop and coordination drawings applied to project sites.

4)Ensure/Responsible for contributing to the achievement of project target within covered areas which provide management direction to project team.

5)Ensure that the works are done in compliance with the project specifications, applicable standards, and Client’s requirements.

6)Coordinate workshop on maintenance personnel/technicians, installers, contractors and subcontractors in proper monitoring of day to day installation, ensuring smooth flow in project area.

7)Responsible for over-all design of mechanical project and equipment needed for commercial and industrial buildings.

8)Coordinate with the project management in monitoring the administrative aspect of project operation.

9)Responsible of all concerned/damaged report and project status to the top management.

10)Perform other task assigned by consulting management from time to time.

Project Assignment:

1)New Iloilo Airport Development Project, Cabatuan and Santa Barbara, Iloilo, Philippines

2)National Power Corporation (Generating Unit), Dingle, Iloilo, Philippines

Company: G.C. GEALON ARCHITECTS and ENGINEERS ASSOCIATES

Term: September 2001 to July 2003

Position: Project Consultant – Mechanical Engineering Department

Office Address: Barangay Trapiche, Oton, Iloilo City, Philippines

Nature of Business: Contracting and Consulting Firm

Duties and Responsibilities:

1)Responsible for all inspection of materials arriving at site as per specification, standards and approved data.

2)Performing inspection of installation and monitoring phases of quality control of work as per specifications and standards based on shop drawing details.

3)Responsible and performing inspections to all mechanical shop and coordination drawings applied to project sites.

4)Ensure/Responsible for contributing to the achievement of project target within covered areas which provide management direction to project team.

5)Ensure that the works are done in compliance with the project specifications, applicable standards, and Client’s requirements.

6)Coordinate workshop on maintenance personnel/technicians, installers, contractors and subcontractors in proper monitoring of day to day installation, ensuring smooth flow in project area.

7)Responsible for over-all design of mechanical project and equipment needed for commercial and industrial buildings.

8)Coordinate with the project management in monitoring the administrative aspect of project operation.

9)Responsible of all concerned/damaged report and project status to the top management.

10)Perform other task assigned by consulting management from time to time.

Project Assignments:

1)SM City Mall (B+G+3), Mandurriao, Iloilo City, Philippines

2)Carlos P. Uy Apartment Bldg. (G+2), Mabini St. Iloilo City, Philippines

3)Robinsons Place Iloilo (2B+G+2), Ledesma St., Iloilo City, Philippines

4)JD Bakeshop (G+2), Gen. Luna St., Iloilo City, Philippines

Highlights and Achievements:

-Promoted as Project Consultant after 1 years of service from Project Engineer.

-Able to attend different types of training and seminar including HVAC, Fire Fighting, Plumbing and Power distribution for building.

Company: G.C. GEALON ARCHITECTS and ENGINEERS ASSOCIATES

Term: May 2000 to August 2001

Position: Project Engineer – Mechanical Engineering Department

Office Address: Barangay Trapiche, Oton, Iloilo City, Philippines

Nature of Business: Contracting and Consulting Firm

Duties and Responsibilities:

1)Assist the project manager in monitoring over-all mechanical project, equipment inspection and design in building for installation, which include HVAC, Plumbing and Fire Fighting

2)Assist the project manager in monitoring over-all mechanical project and equipment design in building installation, including water sprinkler, elevator, escalator, power distribution in buildings, etc quality control, supervision of day to day operations in the project area.

3)Liaise with the Consultants/Client’s Representative for the quality control inspections, activities, and testing. Then, provide the corresponding QC documents in accordance with the Inspection and Test Plan as per the QC procedures.

4)Ensure/Responsible for contributing to the achievement of project target within covered areas which provide management direction to project team.

5)Supervises workshop on maintenance personnel/technicians, installers, contractors and subcontractors in proper monitoring of day to day installation, assigning for every position post for installation and ensuring smooth flow in project area.

6)Responsible for over-all design of mechanical project and equipment needed for commercial and industrial buildings (which include water sprinkler, elevator, escalator, air ventilation, air conditioning, power generation, etc…).

7)Coordinate with the project manager in monitoring the administrative aspect of project operation.

8)Maintain and ensure availability of supplies and materials needed for installation with the parts department, expedite the availability or provision of replacement parts and ensure fast; vigilance on site so as to avoid misused and damage of site materials by workers in project area.

9)Responsible of all concerned/damaged report and project status to the top management.

10)Attend biding from government agency and prepare quality report for submission to top management every end of the month.

11)Perform other task assigned by management from time to time.

Project Assignment:

1)Gaisano Mall (B+G+4), Lapaz, Iloilo City, Philippines

2)Iloilo Supermart (Atrium Mall, G+2), General Luna Street, Iloilo City, Philippines

Company: TRANSCOR MOTORS INC.

Term: July 1999 to May 2000

Position: Service Engineer

Office Address: Diversion Road, Mandurriao, Iloilo City, Philippines

Nature of Business: Sales and Service of American, European and Japanese Trucks and Cars

Company: COCA-COLA BOTTLERS PHILS. INC.

Term: February 1999 to June 1999

Position: Maintenance Engineer / Lead man

Office Address: Barangay Ungka, Jaro, Iloilo City, Philippines

Nature of Business: Production and bottling of beverage

Company: DEKA CONTRACTING COMPANY INC.

Term: May 1998 to January 1999

Position: Technical Service Engr.

Office Address: Delgado Street, Iloilo City, Philippines

Nature of Business: Service and installations of split type and centralized air conditioning units (Brand: Trane, Made in U.S.A. product: chillers, chilled water and packaged type air conditioning)

Professional Training and Technical Seminars Attended:

*Mechanical applications and design in building seminar (Plumbing, HVAC and Fire Fighting)

01)Topic: Basic Fire Fighting Design and Hydraulics Calculation

Date: June 12, 2009 Venue: PSME Riyadh Chapter Central Region, KSA

02)Topic: Basic Plumbing Design Calculation

Date: August 07, 2009 Venue: PSME Riyadh Chapter Central Region, KSA

03)Topic: Short Course for HVAC System Design

Date: July 30 to September 30, 2010 Venue: PSME Riyadh Chapter Central Region, KSA

04)Topic: Advances in Pressurization & De-Aeration of Chilled Water System and Design Standard of Pipe Support for Specific Installation

Date: June 27, 2014 Venue: PSME Qatar, Doha, Qatar

05)Topic: District Cooling Plant and Chilled Water Network Design



Contact this candidate