Resume

Sign in

Mechanical Engineer Project

Location:
Abu Dhabi, Abu Dhabi Emirate, United Arab Emirates
Posted:
January 19, 2019

Contact this candidate

Resume:

ABDUL AZARUDEEN

Mobile: +971-*********

E-mail: ac78vo@r.postjobfree.com

Graduate Mechanical Engineer over 6 years of experience in MEP (installation, testing & commissioning, of HVAC, plumbing and firefighting). Worked on commercial projects in India, Dubai and Abu Dhabi.

CORE COMPETENCIES

Project Monitoring & Control

Quality documentation

Follow up of commissioning

Technical support in making program of completion of project

Project progress Analysis

MEP clearances

Cost Analysis

PROFESSIONAL BACKGROUND

James L Williams – JLW – United Arab Emirates

Company Profile:

It is a leading Contracting company in Middle East. Worked in prestigious project, i.e. Blue Waters, AMC Al Maryah Central Mall, Masdar Institute Neighbourhood, high-rise building and various commercial and residential buildings across UAE. Works as a Mechanical Engineer.

Reporting: Reports to QA/QC Manger

Duties: The duty of the Inspection Engineer shall include but not be limited to the following tasks:

1.Make sure that any activity offered for his inspection has an approved shop drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP).

2.Carry out all planned site inspections as per the intervention points marked in the relevant ITP.

3.All site inspection shall be carried out vide an official Inspection and Test request (ITR) submitted by the construction team and sub-contractors through the proper channels.

4.Inspection status shall be recorded in the ITR and any relevant check sheet as per the approved QCP. Any outstanding items shall be verified prior to closing the ITR. In the event that CONTRACTOR excludes an item from an ITR, the item will be dealt with/inspected utilising the ITR from which the item was excluded.

5.Verify with Independent Testing Laboratory (ITL) that all relevant test results related to specific ITR meets the project requirements.

6.In the event he notices that the relevant Shop Drawing, materials used, MS, QCP and ITP do not cover all specification requirements, he should report the same in writing to the Construction Manager and the Senior Discipline Engineer. Copy of such report shall be forwarded to COMPANY project manager.

7.Closely monitor site activities to ensure quality of work is in compliance with contract requirements, good construction practice, only approved materials are used, compliance with shop drawings, and report to Senior Structural Engineer/ Construction Manager.

8.Make sure that all materials used comply with the approved Material Approval Request (MAR).

9.Make sure that the construction team and sub-contractors personnel are using the latest edition of the approved shop drawings, MS, QCP and ITP as per the project master index

10.Closely monitor concrete pours and check continuously concrete materials delivered to site, ensure compliance with QA/QC procedures, and ensure all concrete tests are carried out as per contract requirements.

11.Frequently check formwork/shuttering systems and ensure quality, safety and constructability aspects are met.

12.Make sure that any non-conformity has been reported through a Non Conformance Report (NCR), reviewed by his line supervisor. (Construction supervisor / Construction Manager as applicable). All NCRs shall be coordinated with the PMT Senior Quality Assurance Engineer.

13.Advise Planning Engineer and Construction Manager of any slippage of Progress regarding site activities.

14.Participate in reviewing the Close out Report as submitted by construction team and sub- Contractors.

15.Review the relevant As-Built drawings as submitted by construction team and sub-contractors and make sure that all site conditions are properly addressed.

Juma Al Majid Group – Al Arabia EMW - United Arab Emirates

Company Profile:

It is a leading Contracting company in Dubai. Portfolio includes prestigious project, i.e. Dubai wharf culture village, BADR- Dubai Islamic bank, Nakheel mall, JAM Tower, high-rise building and various commercial and residential buildings across the Dubai.

Worked as a “QA/QCEngineer”

Role & Responsibility:

Co-ordination with clients, consultants and contractors.

Monitoring all the HVAC, plumbing, fire-fighting work to ensure the work done is in accordance to the approved shop drawings and quality standards.

Ensuring that Mechanical services provisions clearance is provided in time for structure for commissioning etc.

To inspect concealed Mechanical services installation prior to closure of void /riser etc in conjunction with QA/QC.

Verify quality requirements are specified to sub-contractors and vendors.

Identify and promote preventive and corrective actions within the site management team to enhance continual improvement.

Monitor all quality related activities on site.

Attending Site coordination meeting with client/consultant/contractor and follow-up for Quality related issues, Prepare agenda, take minutes & follow up.

Identifying NCRs/Defects/Snags and Follow-up with Main Contractor for effective Corrective & Preventive action on the same

Inspection and Testing of all systems related to HVAC, Plumbing water supply, Drainage, Fire alarm & Fire Fighting installation

Projects with Juma Al Majid Group – Al Arabia EMW

PROJECT DESCRIPTIONS:-

1: Dubai wharf culture village At Al Jadaf,

Project consists of 535 apartments and Mall. My job profile was Mechanical engineer to monitor, control and co-ordinate all mechanical installation as per approved drawings and notify problems to consultant, contractors and related sub-contractors for smooth and proper execution of project.

2: BADR- Dubai Islamic bank, madain al emarat

Project consists of 768 apartments and Retail areas, which is ongoing.

S.M Architecture & Engineering Consultancy

Company Profile:

It is a leading Civil contracting company in INDIA. Portfolio includes prestigious project, i.e. 33rd Floor of the King Tower, commercial & residential project at Chennai, high-rise building and various commercial and residential buildings.

Worked as a “Mechanical Engineer”

Role & Responsibility:

Co-ordination with clients, consultants and contractors.

Monitoring all the HVAC, plumbing, fire-fighting work to ensure the work done is in accordance to the approved shop drawings and quality standards.

Ensuring that Mechanical services provisions clearance is provided in time for structure for commissioning etc.

To inspect concealed Mechanical services installation prior to closure of void /riser etc in conjunction with QA/QC.

Follow up with site staff for any kind of changes in installation and to ensure that the consultant’s comments are implemented and arrange revisit of consultant to the designated area at site.

Verify quality requirements are specified to subcontractors and vendors.

Identify and promote preventive and corrective actions within the site management team to enhance continual improvement.

Monitor all quality related activities on site.

Attending Site coordination meeting with client/consultant/contractor and follow-up for Quality related issues, Prepare agenda, take minutes & follow up.

Identifying NCRs/Defects/Snags and Follow-up with Mechanical team for effective Corrective & Preventive action on the same.

To assist internally QS and planning department to update Mechanical system progress.

Inspection and Testing of all systems related to HVAC, Plumbing water supply, Drainage, Fire alarm & Fire Fighting installations.

Project documentation and presentation. Preparation of Snag list and follow up.

Ensure the punch list inspection along with consultant for sign-off and final hand over

Conduct all internal inspections

Maintaining all QA/QC Records (Inspection Requests, Materials & Installation Inspection, NCRs, Snag lists etc.) at site

Project with S.M Architecture & Engineering Consultancy

PROJECT DESCRIPTIONS:-

1: Commercial & Residential Building at Chennai, India

Project consists of 4 Villas and 3 Showrooms. My work was as a Mechanical project engineer to control & coordinate with all these systems & notify the problems to client/consultant & related subcontractors for smooth & proper execution of project.

2: 33 Floor of King Tower

This is one of the prestigious projects located at Chennai. This project consists of a chilled water system for AC along with BMS system.

Unimech MEP contracting, Chennai, India

Company Profile:

It is a premiere company in MEP contracting

Worked as: Site Engineer

PROJECT DONE

Madras Pharma

R.K Garden Function Hall

4 Villa Project

COMPUTER SKILLS

APPLICATIONS: HAP for HVAC, McQuay, AutoCAD & Microsoft Office.

EDUCATIONAL/TECHNICAL QUALIFICATIONS

B.E. (Mechanical) from St. Peter’s College of Engineering and Technology, Anna University, Chennai, India

Certified Welding Inspector - American Welding Society - # 14094251

Accomplished ASNT Level II (U.T, M.T, P.T, R.T)

Certified Internal Auditor ¬ ISO 9001:2015, ISO 14001:2015 & OHSAS 18001:2007 Integrated Management system

Personal Details:

Father’s Name : Haja Sickander Ali

Religion : Islam

Date of Birth : 25/10/1991

Marital Status : Married

Nationality : Indian

Passport Number : L 4141574

Date of Issue : 06/09/2013

Date of Expiry : 05/09/2023

Driving License : Holding Valid UAE License

Place of Issue : Madurai, Tamilnadu, India.



Contact this candidate