Engineer Mechanical
Resume:
Confidential Page *
RESUME
Shaik Mohammed Kaleem
QA/QC Inspector/Welding Inspector/NDT Coordinator
*************@*****.***
CARRIER OBJECTIVE as a professional & in “Life”
I am looking for a career, which offers avenues for career growth and self development and attribute towards ensuring speedy growth and expansion of the organization that offers me opportunities to work as well as to enhance my knowledge.
ACADAMIC QUALIFICATION as Qualified & Certified
CSWIP3.1
Achieved proficiency in fusion welding inspection as a welding inspector accordance with CSWIP requirements bearing CERT NO.92575.
GRADUATION
B.TECH, Mechanical engineering From Jntua University,A.P,INDIA
INTERMEDIATE
Intermediate (Mathematics & Physics, Chemistry) from Board of Intermediate Examination,A.P,INDIA.
SSC
Board of Secondary Education from Bharathi Vidyalaya High School,A.P,INDIA COMPUTER PROFICIENCY making sense of data
AUTOCAD
CATIA
MS-Office
ADDITIONAL TECHNICAL QUALIFICATION
ASNT LEVEL II CERTIFICATION:
NDE certification in Accordance with American Society for Non-Destructive Testing in the following: Radiography Testing, Ultrasonic, Liquid Penetrate and Magnetic particle testing. 1 Radiography Testing - RT
2 Ultrasonic Testing - UT
Confidential Page 2
3 Liquid Penetrate Testing - DPT
4 Magnetic Particle Testing - MPI
Knowledge of ASME Codes and Standards
Internship in BHEL on RADIOGRAPHIC TESTING to examine the defects in a weld metal and Interpretation of the Films.
Training & certification on PWHT.
ISO 9001 Awareness & ISO 9001:2015 Internal Auditor. SAFETY TRAINING
OSHA & First aider
Working in Confined space & at Height.
Risk Assessment & Management.
PROFESSIONAL EXPERIENCE of my Career
Company: Bilfinger Babcock Borsig Service Arabia,K.S.A - MMO (Present Engagement) Duration: Oct, 2015 upto date
Designation: Sr. QA/QC Inspector
S.NO PROJECT/ CLIENT PERIOD DESIGNATION SITE
1. TEST & INSPECTION(T&I)
OF SHUT-DOWN MAJOR
ACTIVITES / SECO
OCT 2018 -TILL DATE
QA/QC
ENGINEER
RABIGH POWER
PLANT,JEDDAH
2. REPLACEMENT OF WATER
WALL TUBES
AUG 2018 - SEP 2018
QA/QC
ENGINEER
RAWPP/RPC/PRC
PLANT,RABIGH,JEDDAH
3. TEST & INSPECTION(T&I)
OF SHUT-DOWN MAJOR
ACTIVITES / SECO
JAN 2018 - JUL 2018
QA/QC
ENGINEER
SHOAIBHA POWER
PLANT,JEDDAH
4. REPLACEMENT OF WATER
WALL PANELS IN BOILER /
RPC
OCT 2017 - DEC 2017
QA/QC ENGINEER RAWPP/RPC/PRC
PLANT,RABIGH,JEDDAH
5. REPLACEMENT OF ESP
OUTLET DAMPER BLADE
TIP & CHEEK
SEALS,DUPLEX FILTERS /
SWCC
MAR 2017- AUG 2017
QA/QC ENGINEER SWCC
PLANT,TAHALIYA,JEDDAH
6. TEST & INSPECTION(T&I)
OF SHUT-DOWN MAJOR
ACTIVITES / SECO
FEB 2017 - MAR 2017
QA/QC
ENGINEER
SHOAIBHA POWER
PLANT,JEDDAH
Confidential Page 3
(FAT)FACTORY ACCEPTANCE TEST
S.NO PROJECT/CLIENT COMPANY LOCATION
1 Installation of evaporative demister pads of desal / SECO
Quality Wire & Products Bahrain Industrical City
2 Upgrading & installation of Air Heater cold
elements / SECO
Howden,Spain GPP,Seco,Juaymah
3 Design & Modification Power Transmission of
Band screens / SWCC
BWT,Germany SWCC,Shoibha
EXPERIENCE IN INDIA Last Employment
Company : Gayathri Technologies,A.P,India
Duration : May 2014 to Sep 2015
Designation: Mechanical Engineer/NDT Inspector
JOB RESPONSIBITES
Preparation and working as per the approved ITP, procedure etc.
QA/QC Activities Control through PMS. (Project Management System)
Monitor,control,NDE inspection,construction activities etc. as per ITP, spec.,codes & standards,approved drawings & procedures.
7. DESIGN & MODIFY POWER
TRANSMISSION OF BAND
SCREEN / SWCC
AUG 2016 – FEB 2017
QA/QC
SUPERVISOR
(MECHANICAL,
CIVIL,
ELECTRICAL,
I&C)
SHOAIBA POWER &
DESALINATION
PLANT,SHOAIBA,JEDDAH
8. TEST & INSPECTION(T&I)
OF SHUT-DOWN MAJOR
ACTIVITES / SECO
NOV 2015 - JUL 2016
QA/QC
ENGINEER
GAZHLAN POWER
PLANT,JUBAIL HIGHWAY
9. REPLACEMENT OF
SECONDARY
SUPERHEATER PANELS IN
BOILER / SECO
MAR 2016- APR2016
QC INSPECTOR /
MECHANICAL
ENGINEER
QURRAYAH POWER
PLANT,QURRAYAH
10. REPLACEMENT OF NEW
AMMONIA REFRIGERATION
SKID / AL-BUYRONI (SABIC)
FEB 2016 - APR 2016
QA/QC
INSPECTOR /
WORK-PERMIT
RECEIVER
AL-BUYRONI CHEMICAL &
GAS,SABIC,JUBAIL
11. REPLACEMENT OF AIR-
PREHEATER ELEMENTS IN
BOILER / SECO
JAN 2016 - FEB 2016
QA/QC ENGINEER SEC-GHAZLAN POWER
PLANT,JUBAIL
12. REPLACEMENT OF DUPLEX
FILTERS & REMEDIAL
WORKS OF A DEBRIS
FILTER / SWCC
OCT 2015 - JAN 2016
QA/QC ENGINEER
/
MECHANICAL
ENGINEER
SWCC
PLANT,TAHALIYA,JEDDAH
Confidential Page 4
Interaction & coordination with client & sub contractors.
Impliment & maintainance of Quality Management System at sites.
Coordination role of pre-commissioning & commissioning activities including documentation.
Preparation of inspection reports,test packs & data dossier.
Preparation of ITP & Method statements as per contract documents.
Issuing Site Surveillance Reports and Non conformity Reports (NCR)
Witnessing the NDT activities such PT, MT, HT & PWHT during fabrication of piping and equipment are being carried out as per the relevant standards Interpreting critical RT films and review of PWHT charts.
Preparing Site Query and reporting & clarifying ambiguities in Design drawings with the client.
Review of piping P&ID and isometric drawings, line check and completion of test packs.
Check flow direction arrows on valves, Verify that the properly identified valves are installed in accordance with the flow diagram.
Ensure that pipe supports, hangers and guides have been installed in accordance with the piping drawings and the pipe support details.
Routine supervision and recommendation of on-going work activities coordinating with the construction team.
Ability to inspect welding fabrication.
Ability to follow NDT testing method in welding inspection.
Inspecting NDT techniques like MT, PT, UT, RT.
Witnessing of welders and welding procedures approval test as required.
Verification and validation of the calibration certification of welding machines / equipment’s as per requirements.
Coordinate with construction NDT & testing group and QC department in the preparation test requirement of each test pack and facilitate close–out of any outstanding punch items before and after the pressure tests.
Maintain the records for weld history.
Qualification and performance monitoring of welding personnel.
Review & selection of all WPS and monitor welders qualification testing and procedures for welding verification and conformance to contract project specification and requirements.
Maintain the document as per the requirement.
Maintaining/Calculating welders percentage of repair rate.
Inspection and test plans (ITP's), Quality management procedure documents review before conducting inspections.
Follow the procedure for inspection as per the company standard.
Receiving inspection of electrodes and filler wire accordance with ASME SEC II part C As per approved WPS.
Witnessing dye penetrant test on joints (annular plate to shell plate) and magnetic particle test for temporary attachments, nozzles and reinforcing pad plates.
Prepare and maintain all reports in every stage of inspection.
Ensuring NDT clearance, as per the project requirement before hydro test, review and updating of all documents related to welding.
Visual inspection of Pipeline and preparing QC punch list after installation and coordinate with the responsible field engineer or supervisor for its completion.
Ensure that project construction activities are executed in accordance with approved quality plan and procedures.
Involved in Mechanical completion activities, including punch list preparation according to category “A” “B” “C” “D” etc., and punch list follow-up for the close out of the punch items accordingly, prior to final completion Inspection.
Co-ordination role as QC Electrical, Civil & Instrumentation including documentation.
Co-ordination role as QC Static Equipment including documentation.
Co-ordination role as QC Rotary Equipment including documentation.
Project hand over to the customer with proper and necessary documentation. Confidential Page 5
Ability to distribute tasks appropriately as per the competencies and skills of the welders.
Construction raw material and Consumable Inspection & In-Process welding Inspection.
Visual Inspection of pipe fit up and weld joints and reject/accept as per acceptance criteria of ASME B 31.3
Visual Inspection of structural members fit up and weld joints as per acceptance criteria of AWS D 1.1
Monitoring Pre heating, Inter pass temperature, Post weld heat treatment and Control & Storage of Welding Consumables.
Calculating the cumulative welder length (linear 0.2% & joint 0.5%), maintaining the repair percentage of each welder and weld production report.
Performed testing of products at specific stages to ensure meeting of quality measurements including dimensions performance and correct chemical makeup.
Inspected welds for quality standards.Rejected inferior products and inferior welds.
Sequence of welding & inspection operations like prior to welding, during welding & after welding.
Co-ordinate and follow-up to rectify the punch items and clear the punch items with client within the time schedule.
Conduct the tool box meeting with welders for maintain quality sound weld of production joints as per approved WPS and educate to welders to avoid LBE from the Client.
As an internal auditor apply & uphold the prinicples Code of Ethics and International Standards for Professional Practice of Internal Auditing - Institute of Internal Auditors, U.K. and Ireland
(Integrity, Objectivity, Confidentiality, Competency, Independence)
Share reports on customer needs, problems, interest & competitive activities.
Follow-up corrective & preventive actions & close out the NCR.
Follow-up PI & close out the External Audit Report. MEMBERSHIP
Member in Indian Society Of Mechanical Engineers, India INTERPERSONAL SKILLS
Good interpersonal and communicational skills.
Confidence to face new challenges.
Has good learning capabilities & very competitive in any aspect.
Independently, pro-active & meticulous.
Able to handle the job as mechancial engineer & site engineer/multi-displine.
The ability to communicate in written and oral formats with diplomacy and tact.
Successful leadership of subcontractors and project teams in support of quality endeavors.
Believe in time management.
DECLARATION
The above furnished details are genuine & if given a chance, I shall spare no pains with hard work, coupled with sincere dedication for the Company’s Benefits to prove trust worthy. Date:
Place:
(SHAIK MOHAMMED KALEEM )
Contact this candidate