* * * . * . * o r d b a r

Personal Information

Name: Sajjad

Surname: Bordbar

Gender: Male

Nationality: Iranian

Date of Birth: September 22, 1985

Contact Information

Address: Alley 2, Kuhistan St., Jomhouri Boulevard, Fars province, Shiraz, Iran. Post Code: 714**-*****

Tel (mobile): +98-913-***-****

Fax: +98-21-897*****

E-mail: ac71s2@r.postjobfree.com

Linkedin: https://www.linkedin.com/in/sajjad-bordbar-15a358109/ Research Interests

- Interdisciplinary subjects; materials science, chemistry, mechanics, electronics, microbiology

- Corrosion and protection of metals, novel coatings and corrosion monitoring systems

- Materials Characterization; Correlation between material properties and microstructure. Highlights

Ph.D., M.S. and B.S. in Materials Engineering; with a focus on corrosion and materials protection, 2004-2017.

Publication of 5 ISI, 2 ISC and 8 national conferences papers; in the case of corrosion of metals, 2012-2018.

Top student during educations, 2012-2017.

Editorial team member and reviewer in international journals and member of national scientific societies; 2012- 2018.

Participation in 12 research projects as project manager and research assistant; mostly about corrosion monitoring, corrosion controlling and improving materials performance, 2012-2018.

5 years’ experience in industrial projects as Research and Development Manager; supervision of 30 industrial projects; mostly about corrosion monitoring, corrosion controlling and manufacturing of industrial equipment, 2013-2018.

Technical laboratory experiences in materials and surface characterization, corrosion evaluation, electrochemical measurements and coating processes.

Ability of modeling and simulation of engineering processes by the most comprehensive software.

Teaching experience for M.S. and B.S. students, thesis advisor and holding several specialized workshops; 2012-2018.

Holder of scientific and practical certificates in the fields of engineering and management, 2008-2018. Educations

Ph.D. in Materials engineering, Graduate University of Advanced Technology, Kerman, Iran, 2012-2017. Thesis Title: Studying the corrosion of copper in chlorine gas containing environment; case study: water and wastewater gas chlorination systems.

M.S. in Materials engineering (Corrosion and materials protection), Graduate University of Advanced Technology, Kerman, Iran, 2010-2012.

Thesis Title: Investigation of welded API X70 steel corrosion behavior in soil simulated solution. B.S. in Materials engineering (Industrial Metallurgy), Sistan & Baluchestan University, Zahedan, Iran, 2004-2009. Thesis Title: Design and manufacture of automatic wood turning machine. Publications

ISI Papers:

[1] Z. Sekhavat Pour, M. Ghaemy, Sajjad Bordbar, H. Karimi-Maleh, Effects of surface treatment of TiO2 nanoparticles on the adhesion and anticorrosion properties of the epoxy coating on mild steel using electrochemical technique, Progress in Organic Coatings 119 (2018) 99-108.

[2] Sajjad Bordbar, M. Alizadeh, M. Iranmanesh, Corrosion Failure of the External Surface of Chlorinator’s Copper Pipes in a Water Disinfection Station, Journal of Failure Analysis and Prevention, 17 (2017) 1139–1148.

[3] M. Habibi, A. Laktarashi, Sajjad Bordbar, Coating of Ni–Al–N ions on Nimonic 75 alloy by 4 kJ plasma focus device, Corrosion Engineering, Science and Technology, 51 (2016) 272-277.

[4] M. Alizadeh, Sajjad Bordbar, The influence of microstructure on the protective properties of the corrosion product layer generated on the welded API X70 steel in chloride solution, Corrosion Science 70 (2013) 170– 2 C V . S . B o r d b a r

179.

[5] Sajjad Bordbar, M. Alizadeh, S.H. Hashemi, Effects of microstructure alteration on corrosion behavior of welded joint in API X70 pipeline steel, Materials and Design 45 (2013) 597–604. ISC Papers:

[1] Sajjad Bordbar, M. Alizadeh, M. Iranmanesh, Failure analysis of clogging caused by corrosion of copper pipes containing chloride gas in the presence of moisture (case study), The journal of novel materials, volume 8, issue 3, 2017, p29-p40. http://jnm.miau.ac.ir/article_2803.html

[2] R. Saleh, M. Alizadeh, Sajjad Bordbar, Studying the corrosion behavior of AA2024-T6 Aluminum Corrosion Coated by Electrolytic Plasma Oxidation in Marine Environment, Journal of Marine Engineering, volume 10, issue 20, 2014, p51-p59.

http://marine-eng.ir/browse.php?a_id=324&sid=1&slc_lang=en Conference Papers:

[1] R. Saleh, M. Alizadeh, S. Bordbar, “Investigating the corrosion behavior of T6-2024 aluminum alloy coated by plasma electrolytic oxidation method in the marine environment”, The 14th National Congress of Corrosion, Tehran, Iran, 2013.

[2] N. Yazdi, M. Alizadeh, S. bordbar, “Connecting AISI 304L austenitic stainless steel and CK45 carbon steel by rotary friction welding method and study the corrosion behavior of connection area in marine environment”, The 14th National Congress of Corrosion, Tehran, Iran, 2013.

[3] S. Bordbar, M. Alizadeh, J. Bordbar, “Simulation of cathodic protection system of 40-T-101 storage tank - Sirri Island- NGL project- Iranian Offshore Oil Company”, The 14th National Congress of Corrosion, Tehran, Iran, 2013.

[4] M.R. Kamali, M. Alizadeh, S. Bordbar, “Investigating the effect of cooling rate in directionally solidified Al- 1.8Fe eutectic alloy on the corrosion behavior in media containing chloride ions”, The 14th National Congress of Corrosion, Tehran, Iran, 2013.

[5] S. Bordbar, M. Alizadeh, “Simulation of austenizing time compared to specimens dimension on heat treatment of API X70 pipeline steel weld seam by finite element method”, The 3rd International Conference on Materials Heat Treatment, Isfahan, Iran, 2012.

[6] S. Bordbar, M. Alizadeh, S.H. Hashemi, “Experimental study of heat treatment influences on corrosion behavior of welded API X70 heat affected zone in carbonate / bicarbonate solution containing chloride ions”, The 13th National Congress of Corrosion, Tabriz, Iran, 2012.

[7] S. Bordbar, M. Alizadeh, S.H. Hashemi, “Prediction of pH variations within the pittings formed on the surface of welded API X70 heat affected zone during potentiodynamic polarization test in solution containing chloride ions”, The 13th National Congress of Corrosion, Tabriz, Iran, 2012.

[8] R. Saleh, M. Alizadeh, S. Bordbar, “A review of plasma electrolytic oxidation coatings on aluminum”, Second Annual Conference on innovations in thin film processing, Kerman, Iran, 2012 Awards

[1] First-Rank among graduated Ph.D. students of Materials Engineering, Kerman Graduate University of Advanced Technology, Kerman, Iran 2017.

[2] Top Ph.D. student of the Kerman Graduate University of Advanced Technology, Kerman, Iran 2014.

[3] Superior researcher of Kerman province in the field of engineering, Iran, 2014.

[4] Second-Rank among graduated M.S. students of materials engineering, Kerman Graduate University of Advanced Technology, Kerman, Iran 2012.

Scientific and Society Memberships

[1] Editorial Team member of Materials Science: Materials Review (Journal), Whioce Publishing, Singapore, 2018- present.

[2] Editorial Team member of Insight-Corrosion Science & Protection (Journal), PiscoMed Publishing, Singapore, 2018-present.

[3] Reviewer, Material Science Research India (Journal), Oriental Scientific Publishing, India, 2018-present.

[4] Membership in the elite Armed Forces Foundation of Iran, 2014-present.

[5] Member of Iranian Institute of Welding & Non-destructive Testing, Tehran, Iran; 2013-present.

[6] Member of Iranian Corrosion Association, Tehran, Iran; 2013-present.

[7] Member of Judo federation, Physical Education Organization of Iran, Tehran, Iran; 2012-present.

[8] Member of Red Crescent Society of Iran, Iran, 2012-present. Research Projects

[1] Design and production of high thermal conductive anti-corrosion coating for internal coil of gas heat exchangers; Funded by National Iranian Gas Company, Iran, 2018-present (Project manager).

[2] Failure analysis of condenser gearbox of Iranshahr steam power plant; Funded by Ministry of Energy of Iran, Iran, 2016-2018 (Project manager).

[3] Investigating the corrosion failure of electro-pumps in calcareous water wells in Poldokhtar city and providing practical solutions to solve the problem; Funded by Water and Wastewater Company of Lorestan Province, Iran, 3 C V . S . B o r d b a r

2016-2018 (Project manager).

[4] Acquiring technical knowledge for production of copper ultra-thin foil for lithium batteries; Funded by Energy Resources Development Agency of Iran, Iran, 2015-2018 (Project manager).

[5] Designing and manufacturing of cathodic lithium-iron phosphate material using the mechanochemical synthesis by high-energy ball mill and the feasibility of industrial production; Funded by Energy Resources Development Agency of Iran, Iran, 2015-2018 (Project manager).

[6] Investigating the corrosion behavior of chlorinator system and providing strategy to prevent it; Funded by Water and Sewage Company of Iran, Iran, 2013-2017 (Research Assistant).

[7] Manufacturing an alternative model for nickel collectors and determine its properties; Funded by Energy Resources Development Agency of Iran, Iran, 2013-2015 (Project manager).

[8] Attainment of the production knowledge of multi-layer coatings on nickel base alloys for land and air turbines with the aims of thermal barrier, hot corrosion resistance and thermal shock; Funded by Ministry of Energy of Iran, Iran, 2013-2015 (Project manager).

[9] Investigating the impact of operating conditions and other factors on the failure and corrosion of hot-gas-path turbine parts of Kerman power plant; Funded by Kerman Combined Cycle Power Plant, Iran, 2013-2015

(Research Assistant).

[10] Modification of electrical properties and corrosion behavior of aluminum wires using controlled solidification process; Funded by Graduate University of Advanced Technology, Kerman, Iran, 2010-2012 (Research Assistant).

[11] Modification of corrosion behavior of welded API X70 pipeline steel in alkaline media; Funded by International Center for Science, High Technology and Environmental Sciences, Iran, 2011-2012 (Research Assistant).

[12] Investigating the effect of operational parameters on the mechanical and corrosion behaviors of ceramic coated AA2024 aluminum produce by plasma electrolytic oxidation; Funded by Graduate University of Advanced Technology, Kerman, Iran 2012-2013 (Research Assistant). Industrial Experience

Five years’ experience in AGSP Engineering Company (Knowledge-based Company) as Research and Development Manager; Kerman Province Science and Technology Park, Iran, 2013-Present The listed projects were performed under my supervision at AGSP Engineering Company:

[1] Designing, manufacturing and implementation of corrosion resistant coating for crude oil risers (underwater coating) of 12 oil platforms, Iranian Offshore Oil Company, 2017-2018 (National Project)

[2] Designing, manufacturing and implementation of high temperature and vibration resistant of NGL's turbines, Sirri Island, Iranian Offshore Oil Company, Iran, 2018.

[3] Designing and manufacturing of corrosion monitoring system for internal coils of heat exchangers, National Iranian Gas Company, Isfahan, Iran, 2018.

[4] Designing and manufacturing of a novel repair coating for oil platforms Helidecks, Iranian Offshore Oil Company, Iran, 2018.

[5] Implementation of decorative, waterproof, anti-bacterial and anti-acid coating of Riaziat park water ponds, Municipality of Kerman province, Iran, 2018.

[6] Implementation of decorative, waterproof, anti-bacterial and anti-acid coating of Shora park water ponds, Municipality of Kerman province, Iran, 2018.

[7] Designing, manufacturing and implementation of novel coating for controlling flanges corrosion (Nasr oil platform No. 1, Nasr Main platform, Ilam Oil platform, Steam and water plant), Iranian Offshore Oil Company, Iran, 2017.

[8] Evaluation of corrosion damages and designing cathodic protection system, Shin aqua park, Iranian National Standards Organization, Iran, 2017.

[9] Designing and manufacturing of thermal insulation coatings for gas pipelines, National Iranian Gas Company, Mobarakeh plant, Iran, 2017.

[10] Evaluation of Corrosion damages and designing Cathodic Protection System, Mojhaye Khorushan aqua Park, Iranian National Standards Organization, Iran, 2017.

[11] Designing and manufacturing of anti-acid (pH<1) coating for electric cables of cathodic protection system, National Iranian Gas Company, Naien Plants, Iran, 2017.

[12] Evaluation of corrosion damages and designing cathodic protection system, Iranian aqua Park, Iranian National Standards Organization, Iran, 2017.

[13] Evaluation of corrosion damages and designing cathodic protection system, Kowsar aqua park, Iranian National Standards Organization, Iran, 2017.

[14] Manufacture of corrosion resistant parts for the pumps containing chemicals, Phase 2 of chemicals building, Sarcheshmeh Copper Complex, Kerman, Iran, 2017 (Pump Inlet Liner, Pump Shaft, Pump impeller, Pump Bearing Container, Pump Stage, housing caps, stuffing box, Pump Gland, Lantern ring).

[15] Corrosion monitoring and determination of the remained life of concrete pillars of Barez Rubber factory, Kerman, Iran, 2017.

[16] Implementation of multilayer corrosion resistant coating (zinc rich epoxy, MIO, polyurethane) of metallic tanks, Tiss Chabahar Cement Factory, Chabahar, Iran, 2017.

[17] Corrosion monitoring and determining the remained life of concrete pillars of Javad Alaema Hospital, Kerman University of Medical Sciences, Kerman, Iran, 2016.

[18] Corrosion monitoring and determining the remained life of concrete pillars of Agricultural College of Minab 4 C V . S . B o r d b a r

University, Hormozgan University, Iran, 2016.

[19] Implementation of waterproof coating on concrete of Madar Park, Municipality of Kerman province, Iran, 2016.

[20] Manufacturing of molybdenum filter sector disks, Sarcheshmeh Copper Complex, Kerman, Iran, 2016.

[21] Manufacturing of SS316L isolated water tanks for DMH drilling machine, Sarcheshmeh Copper Complex, Kerman, Iran, 2016.

[22] Implementation of anti-bacterial/anti-corrosion and high abrasion resistant coating inside the storage tanks, Bolur Ice making factory, Kerman, Iran, 2016.

[23] Implementation of corrosion resistant coating on high temperature pipes containing crude oil, Nusrat Oil Platform, Iranian Offshore Oil Company, Iran, 2016.

[24] Design and implementation of composite coating for deep holes on the movable roof of crude oil storage tank

(One million barrels), Iranian Offshore Oil Company, Iran, 2016.

[25] Design of the cathodic protection system with the sacrificial anode of the Kerman Central Mosque, Kerman, Iran, 2016.

[26] Corrosion monitoring of steel bars inside the cooling tower of Zarand steam power plant and design of corrosion protection system, Zarand steam power plant, Kerman, Iran, 2015.

[27] Cathodic protection of pipes and equipment immersed in deep water wells in Zarand City, Zarand water and sewage company, Kerman, Iran, 2015.

[28] Designing and manufacturing of coke furnace cell doors of Zarand Iranian Steel Company, Zarand Iranian Steel Company, Kerman, Iran, Iran, 2014.

[29] Implementation of forge welding, development project of Kerman University of Medical Sciences, Kerman University of Medical Sciences, Kerman, Iran, 2014.

[30] Corrosion monitoring and determining the remained life of the foundation (reinforced concrete) of the faculty of traditional medicine, Kerman University of Medical Sciences, Iran, 2014. Technical Laboratory Experiences

[1] Materials Characterization & Surface Analysis techniques including, Metallography Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDS), X-ray diffraction (XRD), X-Ray Fluorescence (XRF), Atomic Force Microscopy (AFM), Particle Size Analyzer, FTIR and Atomic Absorption

(AA) Spectroscopy.

[2] Mechanical Tests including, Impact test, Tensile Test, Creep test, Hardness & Micro hardness test.

[3] Electrochemical measurements (Potentiostats / Galvanostats), Standard corrosion tests, Electrochemical Impedance Spectroscopy, NOISE, Atmospheric Corrosion tests.

[4] Coating processes, Hot dipping, Electroplating, Plasma Electrolytic Oxidation (PEO), Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD). Computer Skills

[1] Operating Systems: MSDOS, Microsoft Windows.

[2] Engineering Simulation Software: MATLAB, COMSOL Multiphysics Modeling Software, CATIA, SolidWorks.

[3] Engineering software: Microscopic Image Analyzer, MS-Project, Clemex image analysis

[4] Technical Drawing: AutoCAD, Photoshop.

[5] Office Applications: Microsoft PowerPoint, Access, Excel, Word. Teaching Experiences, Thesis Advisor and Holding workshops Teaching

Experiences

M.S. students:

- Conversion paints and coatings - Advanced Kinetics - Electrochemistry and Kinetics

- Corrosion Inhibitors - Cathodic Protection - Corrosion in natural environments

- Corrosion Principles Lab

B.S. Students:

- Non-Ferrous Alloys Casting - Materials Science - Physical Metallurgy

- Heat treatment in welding - Heat distribution in welding - Engineering materials

- Welding Metallurgy of carbon

and low alloy steels

- Welding Metallurgy of non-

ferrous metals

- Mechanism of destruction and

failure mechanics

- Standard application - Design of welding process - Principles of welding processes

- Physical Properties and Material

characterization

- Gas metal arc welding

5 C V . S . B o r d b a r

Thesis Advisor

[1] Connection of SS 316L austenitic stainless steel and CK 45 carbon steel by using rotational friction welding and investigation of corrosion behavior of bonding zone in simulated seawater environment, M.S. thesis of materials engineering, Kerman graduate university of advanced technology, Kerman, Iran, 2013.

[2] Design of MEMS electro-thermal capacitor for use in R-F regulated filters, M.S. thesis of electrical engineering, Shahid Bahonar University of Kerman, Iran, 2013.

[3] Design of adjustable filter for radio frequency using MEMS technology, M.S. thesis of electrical engineering, Shahid Bahonar University of Kerman, Iran, 2013.

Holding

workshops

[1] Applications of electrochemical impedance spectroscopy (EIS) in materials engineering, Kerman Graduate University of Technology, Kerman, Iran, 2017.

[2] Applications of electrochemical impedance spectroscopy (EIS) in biochemistry, Kerman Graduate University of Technology, Kerman, Iran, 2014.

[3] Modeling the corrosion phenomena by using COMSOL multiphysics, Kerman Graduate University of Technology, Kerman, Iran, 2014.

[4] Analysis of effective parameters on corrosion monitoring by DC electrochemical methods, International Center for Science, High Technology and Environmental Sciences, Iran, 2012.

[5] Analysis of the electric equivalent circuits obtained by Electrochemical Impedance Spectroscopy, International Center for Science, High Technology and Environmental Sciences, Iran, 2012.

[6] Simulation of engineering processes using COMSOL multiphysics, Kerman Graduate University of Technology, Kerman, Iran, 2011.

Certificates

[1] Paints and coatings Inspection (level 1 and 2), Iranian Corrosion Association, Iran, 2018.

[2] Meet the requirements of national standard No. 8987, Iranian National Standards Organization, Iran, 2016.

[3] Meet the requirements of the recreational equipment operator, Iranian National Standards Organization, Iran, 2016.

[4] The application of electrochemical techniques in corrosion, Iranian Corrosion Association, Iran, 2012.

[5] Applications to Nanotechnology, Dpaco Sciences Academy, Iran, 2012.

[6] Cathodic Protection, Iranian Corrosion Association, Iran, 2011.

[7] Principles and theories of the Piping, Ministry of Science Research and Technology of Iran, Iran, 2010.

[8] MATLAB, Shiraz University, Iran, 2010.

[9] Industrial designing by CATIA, Ministry of Science Research and Technology of Iran, Iran, 2010.

[10] HSE, Industrial Management Organization of Iran, Iran, 2010.

[11] Industrial designing by SolidWorks, Ministry of Science Research and Technology of Iran, Iran, 2010.

[12] Gas metal arc welding, GMAW, Iran Technical and Vocational Training Organization, Iran, 2010.

[13] QC1, Welding Inspector Course Grade: CWI, Inspectorate Qeshm Ltd., Iran, 2009

[14] Designing and drafting by AutoCAD, Jahad Daneshgahi University education organization, Iran, 2009.

[15] ICDL (IsIran Institute, Iran), 2009

[16] Strategic Management, Industrial Management Organization of Iran, Iran, 2009.

[17] MS-Project, Iran Technical and Vocational Training Organization, Iran, 2008. Other Activities:

[1] 2th Kyu, Judo Belts (Iran Judo federation, Iran), 2017.

[2] 3th Kyu, Judo Belts (Iran Judo federation, Iran), 2015.

[3] 4th Kyu, Judo Belts (Iran Judo federation, Iran), 2013.

[4] Rescue and first aid (Red Crescent Society of Iran, Iran), 2010.

[5] 5th Kyu, Judo Belts (Iran Judo federation, Iran), 2009. Hobbies

Scuba diving, Judo, Cooking, Reading psychological magazines. Viewpoint

Teamwork can lead to better decisions, products, or services. In other words, teamwork is the key to any brilliant success. Teamwork generates special energy for development. Team members work together and fuse their personal energies and talents to deliver tangible high performance results. Last update: December 08, 2018.

Contact this candidate