Engineer Electrical

Momin Rayyan Iqbal Ahmad.

E&I QA/QC Engineer / Supervisor / Inspector.

Contacts: +919********* / +917*********.

+971*********. c/o: +971*********.

email:****.*******@*****.***

PROFILE SUMMARY:

Having 7years’of relevant experience in Quality Control/Quality Assurance and Constructionactivities. Comprehensive experience in the field of Construction Site& Inspection of Electrical & Instrumentation Projects of Oil & Gas Industries such as:

KNPC BROWN FIELD PROJECT (KUWAIT), BS180 (KUWAIT), NORM ADNOC PROJECT (UAE), PETRO RABIGH (KSA), YASREF (KSA) in Abroad as well as in India.

WORK EXPERIENCES: (8 YEARS)

1.Company: Almeer Technical Services Co. W.L.L.

Client: SK Engineering & Construction, JGSK Joint Venture.

Address: KNPC CLEAN FUELS PROJECT (BROWN FIELD), MAA REFINERY, KUWAIT.

Duration: 15 Jan 2018 to Up to date.

Position: E&I QA/QC Supervisor.

Job Description:

Responsible to raise the NFIs (Notification for Inspection) as per hold/witness point based on Systems & Sub-Systems.

Ensure that all installation is in compliance with approved installation drawing, technical specification and governing standard.

Inspect and monitor of instrument and stanchion installation, impulse/airline tubing with leak test, installation using Hook up Drawings and PIDs and cable termination of Junction Boxes, LCS, Lighting systems etc.

Conducting the inspection for the installation of cabinets, junction box and field mounted instruments and panels.

Inspection& Monitoring of power/control/signal cables, EICS cables for cable laying, terminations and glanding with continuity and megger test.

Inspection and Monitor of FO cable laying, Splicing, OTDR and End to End Test.

Recording progress and documenting status of work daily

Coordinate and conduct meeting with contractor regarding quality & field problems prior to meeting with consultant with Recording progress and documenting status of work daily

Preparation of quality inspection and testing monitoring record. Identify pending items and holding points and discussed QC coordinating meeting for actions.

2.Company: Almeer Technical Services Co. W.L.L.

Client: Combined Group Contracting Co. (K.S.C).

Address: Installation of New LP Lean Gas Compressors System and Associated Works at Booster Station BS180, KOC, Burgan Area, Kuwait.

Duration: 11 Jan 2018 to 14 Jan 2018.

Position: E&I QA/QC Supervisor.

Job Description:

Preparation of the site activities for Instrument and Electrical works.

To control plan schedule& Documentation for assigned works.

Inspection and installation of Boosters, instrument and stanchion, impulse/airline tubing with leak test, using Hook up Drawings and PIDs, cable laying & termination Installation of Junction Boxes.

Inspect and monitor of Cable tray/conduit installation, Panels Installation etc.

To perform the job at the site with highly cares of the safety requirements.

3.Company: Consilium Middle East.

Client: ADNOC, UAE.

Address: NORM Handling, Treatment and Disposal Project at BeAAT.Ruwais,

Abu Dhabi.

Duration: 19 Jan 2017 to25 Dec 17.

Position: E&I QA/QC Engineer.

Job Description:

To control plan schedule and execute the daily work.

Responsible to raise the RFIs (Request for Inspection) as per hold/witness point based on Systems & Sub-Systems.

Issuance of NCR (Non Conformance Report) for discrepancies as per material system specification.

Responsible for the approval of various inspection and testing for electrical and instrumentation works based on approvedQuality Control Procedures & Inspections & Test Plan (QCP / ITP).

Issuance of punch list as per project scope of work.As a punch list co-coordinator, controlling punch list, ensuring the closing of the punch in coordination of electrical/instrumentation/piping group.

Maintaining all Red line drawings for site activities.

Conducting the inspection for the installation of cabinets, junction box and field mounted instruments.

Inspection& Monitoring of power/control/signal cables for cable laying, terminations and glanding with continuity and megger test.

Ensure that all installation is in compliance with approved installation drawing, technical specification and governing standard.

Inspect and monitor of instrument and stanchion installation, impulse/airline tubing with leak test, installation using Hook up Drawings and PIDs and cable termination of Junction Boxes, LCS, Lighting systems etc.

Inspect and monitor of Cable tray/conduit installation, On/Off Valves, Panels Installation (PLC, DCS, F&G).

4.Company: Elmatics Engineer’s Pvt. Ltd. (India)

Client: Sandoz India pvt ltd.

Address: New Mumbai.

Duration: Sep 2015 to Sep 2016.

Position: E&I Engineer.

Job Description:

Installation of Junction Boxes, smoke and gas detectors, Lighting fixtures, Panels, cable tray and conduits etc.

Installation and monitor of cable laying, termination and glanding.

To control plan schedule and execute the daily work.

Manpower management and attend weekly meetings with the client.

Managing and handling manpower tools and instruments.

5.Company:Asyad International Co.

Client: Daelim Saudi Arabia Co.

Address: Petro Rabigh (Saudi Aramco), CP1 & 2, Rabigh, Saudi Arabia.

Duration: 26 Jan 2015 to 31 Aug 2015.

Position: E&I QA/QC Inspector.

Job Description:

Review plans and drawings in accordance with specifications, codes and standards

Attend Weekly QA/QC Meeting

Surveillance and witnessing of Daily Construction Activities as per ITP

Responsible for unpacking inspection of equipment’s at warehouse and preparing material receiving inspection reports.

Review and approval of QC Document like QCP, ITP, QCS, and Method Statement etc.

Coordinate and conduct meeting with contractor regarding quality & field problems prior to meeting with consultant.

Preparation of quality inspection and testing monitoring record. Identify pending items and holding points and discussed QC coordinating meeting for actions.

Inspection and monitor of Instrument Installation, Cable tray/conduit installation, Panels Installation, Airline and Impulse line tubing, Cable laying and cable glanding termination etc.

To perform the job at the site with safety and take all the necessary precautions needed for the execution of the job.

Final submission/ Hand over of the entire original records as per project requirements.

6.Company: Asyad International Co.

Client: SK Engineering and Construction.

Address: YASREF (Yanbu Aramco Sinopec Refinery), EPC 2, Yanbu, Saudi Arabia.

Duration: 6 June 2013 to 21 Jan 2015.

Position: E&I QA/QC Inspector.

Job Description:

Inspect and monitor of instrument and stanchion installation, impulse/airline tubing with leak test, installation using Hook up Drawings and PIDs, cable laying, termination, Installation of Junction Boxes,

Responsible for the approval of various inspection and testing for electrical and instrumentation works based on approved QCP & ITP.

Responsible to raise the RFIs (Request for Inspection) also maintaining the Red line Drawings.

Responsible for QA/QC inspection task in accordance with the requirement of established inspection plan

Recording progress and documenting status of work daily. Checking and Verification of IFC Drawings.

Monitoring quality of work for conformance to contract documents, including specification and drawing.

Responsible for Complete execution of the projects &updating project reports on work accomplishments.

7.Company: Elmatics Engineer’s Pvt. Ltd. (India)

Client: Sify Technologies.

Address: Airoli, New Mumbai.

Duration: May 2010 to May 2013

Position: E&I Engineer

Job Description:

Installation and monitor of cable laying, termination and glanding.

Installation of Junction Boxes, smoke detectors, Lighting fixtures, cable tray and conduits etc.

Sub-contractor Management & Documentation for assigned works.

Managing and handling manpower tools and instruments.

Monitoring the material delivery and its contents with reference to the requisition.

To perform the job at the site with safety and take all the necessary precautions needed for the execution of the job.

Coordinate and conduct meeting with contractor regarding field problems prior to meeting with consultant.

HIGHLIGHTS:

1.Approval for ADNOC, UAE

2.Approval for KNPC, Kuwait

3.Experience in GREEN FIELD and BROWN FIELD Both.

EDUCATIONAL QUALIFICATIONS:

Examination

Year

University

Percentage

B.E.

(Electronics)

2010

Rizvi College of Engineering.

Bandra (W).Mumbai University.

57%

PGDBM

PURSUING

NMIMS, MUMBAI.

H.S.C

2005

Maharashtra State Board, Mumbai.

70%(1st Class)

S.S.C

2003

Maharashtra State Board, Mumbai.

70%(1st Class)

PERSONAL DETAILS:

Date of Birth: 13th Nov, 1987.

Religion: Islam

Nationality: Indian

Linguistic Proficiency: English, Hindi, Urdu, Arabic, Marathi & Malayalam.

Passport No.: S0627476 (Valid Up to 29th Feb, 2028)

Date:

Place: Mumbai.

MominRayyanIqbal Ahmad.

Contact this candidate