Engineer Process

Dear Sir/Madam

My name is Somaye Rafiee Dastjerdy. I would like to introduce myself as process

engineer to you and your company.

I‘ve got the working experience in oil, gas, petrochemical projects for 11years in both

engineering for basic and detail and EPC projects as process engineer.

I’ve been completely involved in preparing and designing process documents such as

P&ID, PFD, control philosophy, cause and effect, etc, also equipment design and

calculation.

Furthermore I’m precisely skill full in plant simulation with specific software such as

HYSYS and preparing the heat and material balance table sheet.

Communicating effectively and efficiently with other disciplines such as instrument,

piping, mechanic and knowing their documents is one of my talents, which as know is so essential in our career.

If I was asked to tell you about my traits I would introduce myself as a hard working,

energetic patient and flexible person in accepting others opinions.

Here comes my resume in the attachment.

Best Regards

Somaye Rafiee Dastjerdy

Summary:

Total Experience: 11 Years

Relevant Experience (Oil and gas): 11 Years

Expected Salary: Negotiable

Notice Period: 1 week

Current Location: Tehran, Iran

Reason for change: Find new good options with

international experience and a win-win

cooperation

Somaye Rafiee Dastjerdy

Key Qualifications:

Main Discipline: Process

11Years Experience as Process Engineer

Personal Data:

First Name: Somaye

Last Name: Rafiee Dastjerdy

Current Location: Tehran, Iran

Tel (Mob.): +98-912-***-****

E-mail Adresse: *.******.**@*****.***

LinkedIn Profile: www.linkedin.com/pub/somaye-rafiee

Date of birth: 14.December 1980

Civil status: Single

Education:

2000-2004 Science and researches university, BS of chemical engineering

1987-1999 Hafte Tir School, Diploma

Summary:

Performed process design and developed :

-Piping and instrumentation diagram (P&ID)-Process Flow Diagrams (PFD’s)

-Heat and Material balance table

-Process description and control philosophy

-Cause & Effect Diagrams (C&E’s)

-Process data sheets

-Line list, etc.

Feasibility study:

-Process design definition

-Process engineering check to ensure that design standard are being maintained

-Design is to recognized industrial standards and codes

-Responsible for discussing any comments or queries arising from the approval

issue of the modification package P&ID updating

Prepares P&ID for HAZOPS and introduces the proposal to HAZOPS

committee for Hazard and Operability Study. Takes an active part

in HAZOPS proceedings as a process specialist.

Prepare contract documents and evaluate tenders for the process aspects of

industrial construction.

Conduct research into the development or improvement of chemical engineering

processes, reactions and materials.

Professional skills:

-Line sizing.

-Sizing of Atmospheric tanks.

-Pressure Vessel sizing

-Calculation of centrifugal pumps

-Upstream and down stream line sizing of pressure safety valve

- TSV Calculating.

- Control valve Calculating.

-Surge Analyzing and calculation

- Acquaintance with flaring system

-Acquaintance with standards such as API, ASME, IPS,NIOEC, NFPA, …

-Acquaintance with other disciplines documents, such as piping, instrument,

mechanical, etc.

Certificate:

Flare I - Relief study

Flare II - Flare network and depressurizing system

Software:

-Work with HYSYS software.

-Work with pipe phase software.

-Work with pipe net software.

-Work with Aft Impulse software.

-Work with Microsoft office (excel, world, PowerPoint, outlook).

-Work with AutoCAD software.

Courses:

- Technical & economical respects plan of ABS production (Graduating Research).

- Ethylene glycol dewatering unit designing.

Languages:

- Good knowledge in English (Speaking, Writing)

- France (Basic)

Work Experience:

Total: 11years

January 2009 – to August 2017 Sazeh Pardazi Iran

Professional

Consulting Engineers Co.

experience

As Senior Process Engineer:

Revamping / extension of eleven gas compressor station (basic endorsement

and detail phase as EPC contractor).

Reviewing of basic package and commented of discrepancies and preparing

of basic endorsement package

Preparing of process documents such as process design criteria, process

description, equipment process datasheets, …

Designing and Preparing of the relevant PFDs and P&IDs.

Preparing of ESD block diagram and Control Philosophy.

Hydraulic calculation by HYSYS and PIPEPHASE and preparing of heat

and material balance table sheet

Filling of process data in instrument data sheets such as PSV, PCV,

pressure and temperature transmitter, flow meters,..

Preparing of alarm and set point list document

Review of Siemens technical documents as vendor of compressor

Engineering of Assaluyeh Petrochemical Phase 2 - Offsite Project

Feed, Product and Utilities Network Simulation

Preparing of the relevant PFDs and P&IDs

Preparing of Control Philosophy and Operating Manual

Hydraulic calculations by HYSYS, PIPENET and PIPEPHASE

Main Gas Station and gas station Design as a reduction facility for the

Plants of Assaluyeh Petrochemical phase 2

Calculation of Relief Load of PSVs and BDVs in offside of phase 2

PSV and BDV sizing

Participation in HAZOP study meeting

Engineering of Sea Water Intake of Mapna Qeshm Power & Water

Cogeneration in basic and detail phase.

Preparing of process documents such as process design criteria, process

description, equipment process datasheets, …

Preparing of the relevant PFDs and P&IDs

Surge calculation for system by Aft impulse software

Bandar Abbas refinery gasoline production increase project.( work on

Cooling tower system in basic design phase )

Preparing of process documents such as process design criteria, process

description, equipment list, equipment process data sheet …

Preparing of the relevant PFDs and P&IDs

Sizing of equipments such as sand filters, pump,… and Preparing of

calculation note for sizing

Analyzing and surveying of suitable chemical injection to system such as

corrosion inhibitor, sulfuric acid, anti scale, oil dispersant, per chlorine, ...

Preparing of cause and effect diagram

Differential Management of Kharg NGL Project

Process review of Sofrehgaz and John Brown licensors

Preparing of change forms between two above mentioned licensors for PFD,

P&IDs, Design Basis, Equipment List and, etc

2007 – 2009 energy industries engineering and design(EIED)

Consulting Engineers Co.

As Process Engineer:

Tehran refinery product upgrading project as PMC.( work on gas oil HDS,

kerosene HDS, DM water, and tank farm units.)

Prepared of an engineering report about the basic package of project

Checking and correcting of process documents:

Specification for design basis, process description, process design

standard, utility consumption, basic engineering data, battery limit

condition, etc.

Checking and correcting of PFD, P&ID, BFD

Calculation Sheets for pumps, heat exchangers, blowers, pressure safety

valves, etc.

Participation in HAZOP study meeting with AXENS company as licensor of

GHDS and KHGDS

Khuzestan refinery project, in basic design phase.( work on water system)

Preparing of process documents such as process design criteria, process

description, equipment list, equipment process data sheet …

Preparing of the relevant PFDs and P&IDs

The EPC Project of utility & offsite in the Hormoz oil refinery plant with

300000 BPD includes 60 storage tanks (Feeds, intermediates & products),

two flare systems, interconnecting and associated utility

To generate for Basic design documents consist PID, PFD and Process Data

sheets (OIEC part).

A member of consortium process team

2005- 2007 Petro Niroo Energy(PNE)ConsultingEngineers Co.

As Process Engineer:

KHARG OLEFIN COMPLEX Kharg Utility & Offsite Plant project, in

basic phase

This project consist of below units:

1- Sea water intake and outfall unit

2- Desalination unit

3- Demineralization water unit

4- Steam generation unit

5- Closed cooling water unit

6- Potable and plant water unit

7- Fire water system

8- Air separation unit

9- Instrument and plant air unit

10- Fuel gas system

Duties and responsibility in up units are:

Preparing of Design Basis and Criteria for each unit separately

Preparing of Process Description for each unit separately

Equipment sizing and calculating such as expansion drum, ION exchange,

compressors, centrifugal and reciprocating pumps, heat exchangers …

Preparing of the relevant PFDs and P&IDs

Preparing of heat and material balance table

Preparing of equipment data sheets

Preparing of cause and effect diagram

Preparing of equipment list

Preparing of utility summary tables

Preparing of effluent summary tables

Participation in meetings

Strategic crude oil storage tank project in detail phase

Preparing of process documents such as process design criteria, process

description, equipment list, equipment process data sheet …

Preparing of the relevant PFDs and P&IDs

Preparing of line list

Preparing of process instruments data sheets

Technical Bid Analysis for equipments

Reference:

Mr Masoud Ezzati

Senior Piping Engineer at AKER SOLUTIONS CO.

E-mail: ************@*****.***

Tel (Office): +47 55222607

Tel (Mobile): +47 90776311

Mr Mahmmod Mirzazadeh

Engineering manager of Petro Saze Iranian

E-mail: ************@*****.***

Tel (Office): +98(21) 26409070-4

Tel (Mobile): +98-912-*******

Contact this candidate