Test Engineering
Resume:
RESUME
Mr. Maske Mahadev Sambhaji.
*****.*******@*****.***
Mob No- +919*********
PROFESSIONAL SYNOPSIS:
B.E. -MECHANICAL -
ASNT PT level-2
ASNT RT level-2
WELDING INSPECTOR(AWS RECOMONDED)
Lean Problem Solving from IITD.
SAP, Tally.
Experience: (Total Exp: 6 yrs as QAC Engineer)
1) Working in Ross Process Equipment’s (India) Pvt. Ltd. as an QC Executive From Jan 2017 to till date:
COMPANY PROFILE:
100% owned by Charles Ross & Son Company, NY, USA.
ISO 9001-2015, OSHAS, ISO14001 certified company.
Worldwide Leading Company in Design, Manufacturing, Exporting of Pharmaceutical, Food, Cosmetic Equipment & machines, Processing Equipment’s, Heat Exchangers.
Manufacturing of pressure Vessel, Heat Exchanges, Dryers .Pharma Equipment’s, Jacketed Equipment’s, Rotary Dryers, and Rotating Machineries.
Leading company in Oil, Gas, Petroleum, Refinery, Bravery, and Beverage Projects, Adhesive, paint, Pharma etc.
Working in SS, CS & EXOTIC Materials.
Leading Manufacturers of Process equipment for Beverage and Wineries, SS fabricated heavy jobs, Uni Tanks, Storage Vessels, Tanks, Agitators, Columns, Silo, Nuclear vessels, Vacuum casting chambers,,PRESSURE VESSELS, HEAT EXCHANGERS, in Pune, India
Static & Rotary Equipment Manufacturing Company.
ROLES & RESPONSIBILITIES:
Conduct Third Party inspection like TUV, BVI, EIL, LOYDS, IQUEST, NPCIL, BARC etc.
Prepare WPS, PQR, WPQ, QAP, and Welding Documentations as per Section IX & ITS Approvals from respective client/TPI.
NDT Inspection, RT Film Interpretation, Preparing NDT Reports as per codes.
NDT, Destructive Testing, PMI Testing, Demeter, Lab Testing.
Responsible for Raw material inspection, bought out material, NDT Testing, destructive testing as per ASME Codes like section II, V, VIII, and IX & ISO STD.
Management Representative (MR) for ISO 9001:2015 Audit.
Familiar with Destructive & Non Destructive testing of Raw materials as per ASME/API/DIN STD.
Qualify the Welders, Different Welding procedure, like GTAW, SMAW, GMAW, and SAW.
On Load & No Load Test of vessels with P&ID, FAT Protocol & ISO STD.
Conducting Inspection, Testing, FAT, Documentation with TPI/Clients.
Testing of Heat Exchangers, Pressure vessel, Storage Tanks, Steel Structures.
Inspection of job as per ASME std. like Section II, V, VIII, IX ETC.
Responsible for getting approval for dispatch of Equipment/Machine. From Client against compliance report.
Manage the Testing (PMI, RT, UT, Physical testing), Reports, and Collection of TC of bought & raw material as per std. codes.
Inspection of Mixers, Agitators, Motors, Gear Box, Anchor, Cowl, Homogenizer, Bearing housing, shaft, Lantern, Hydraulic column, Stator, Rotor & Alignment, Clamps.
QAP Preparation for Machines.
Dimensions, Hydro test, Pneumatic Test, Vacuum Test of vessel.
Familiar with cGMP, Engineering Good Practice, GLP, 21 CFR.
QMS documentation, 5S, PDCA, FMEA (Failure Mode & Effects Analysis), PARETO CHARTS, Scatter Diagrams, Root Cause Analysis, KAIZEN,7 QC Tools.
Vendor Development, Vendor Assessment, Manage RT & its documentation.
Control of outgoing quality of components, Rejection Control.
Suppliers audit for compliance
Conduct Internal ISO/OHSAS Audits.
CAPA for issues reported from the vendors, 8D, Customer complaints, DAN, Risk Register, NC Register, Instruments & Gauge history Chart, Master list of Measuring & test Equipment.
Preparation and updating of SOPs/ Work instructions for testing and inspection.
Training to technicians w.r.t QC requirements.
Coordinating with design for engineering changes and updating the records
2) Worked in BECTOCHEM CONSULTANTS & ENGINEERING PVT. LTD., PUNE (Jan 2015 TO Dec. 2016 )
COMPANY PROFILE:
Worldwide Leading Company in Design, Manufacturing, Exporting of Pharmaceutical, Food, Cosmetic Equipment & machines, Processing Equipment’s,
Design & Manufacturing of Pharmaceutical, Liquid & Ointment, API, Food & Cosmetic Equipment & machinery.
Static & Rotary Equipment Manufacturing Company.
Collaboration with RML, New Zealand, Loedige, Germany.
Manufacturer of Heavy machinery, RCVD, Mixers, Blenders.
ISO 9001:2008, ISO 1400:2004COMPANY
ROLES & RESPONSIBILITIES
P&ID, Isometric Plan, Piping Layout, Instruments, Assembly.
Review of URS, PO, and Offer specification.
Inspection of Mixers, Agitators, Motors, Gear Box, Anchor, Cowl, Homogenizer, Bearing housing, shaft, Lantern, Hydraulic column, Stator, Rotor & Alignment.
On Load & No Load Test of vessels with P&ID.
Responsible for All measuring instruments, Documentation, Calibration.
Shaft Run out, Limits, Fit Tolerance, Surface Finish.
Machining & Bought out items inspection with standards.
PREPARE WPS, PQR, WPQ, QAP, Welding Documentations,
Prepare Heat charts, Weld Maps, GRN, Rejection Note,
Factory Acceptance Test (FAT), OQ, DQ, IL, CL, IQ. & its Documentations.
Dimensions, Hydro test, Pneumatic Test, Vacuum Test of vessel.
Familiar with cGMP, Engineering Good Practice.
Vendor Development, Vendor Assessment, Manage RT at vendor.
Co-coordinator in ISO Audits.
Familiar with various tools/3 D/ why-why analysis / Fishbone/CAPA.
Drive Root Cause Analysis on quality issues and implement Corrective / Preventive Actions working with cross functional team
Familiar with quality requirements across commodities including castings, forgings, fabrication, electrical, electronics and composites.
Manage QMS certification and regulatory compliance audits and NC closure actions.
Support on time qualification of products, ensure skill development of team including NDT trainings/certification.
3) Worked in SAPRKON ENGINEERS.(GROUP OF FABTECH PROJECTS & ENGINEERS LTD.) PUNE ( FROM 2011 TO Dec 2015).
COMPANY PROFILE
ASME “U” STAMP, R STAMP, ISO 9001:2008 Certified Company.
Leading company in Oil, Gas, Petroleum, Refinery, Bravery, and Beverage Projects.
EPC Project Based, Static Equipment’s manufacturing company.
Working in SS, CS & EXOTIC Materials.
Approved organization for design & fabrication of different types of process equipments such as Pressure Vessels, Heat Exchangers, and Heavy Fabrication Equipment etc.
Leading Manufacturers of Process equipment for Beverage and Wineries, SS fabricated heavy jobs, Uni Tanks, Storage Vessels, Tanks, Agitators, Columns, Silo, Nuclear vessels, Vacuum casting chambers,,PRESSURE VESSELS, HEAT EXCHANGERS, in Pune, India
FOOD & PHARMA EQUIPMENT
ROLES & RESPONSIBILITIES:
Raw material inspection, rejection, GRN, its Documentation.
Inspection of bought out Materials, Test Certificates.
Welder qualification, having Knowledge of Standard ASME Sec IX: B31.1 & B31.3, AWS D 1.1, AWS B 2.1 / 2.1M, AWS D 14.3 / 14.3 M, AWS C1.5:2015
AWS QC1:2007
Manage to Third party like TUV NORD,TUV RHEINLAND,PUNJ LYOD,BVI, Quest, BARC ; NPCIL etc.
Inspection of welding, WPS, PQR, WPQ, QAP, QCP, SQP
Familiar with ASME CODES like SECTION II, VIII, IX, V.
Familiar with API, IBR, TEMA, ANSI, ASME,
NDT Inspection, RT Film Interpretation, Preparing NDT Reports.
NDT, Destructive Testing, PMI Testing, Demeter, Lab Testing.
Oil Penetration Test, Vacuum Leak Test. Helium Leak Test,
Inspection of Steel Structures, Assembly, Visual Inspection, Stage Inspection.
Hydro testing, pneumatic testing, Pickling Passivation, Painting, Polishing, Buffing.
Inspection of Dish End, Shell, Fit up, Orientation, Elevation, Nozzles, Flanges
Pre-Welding Inspections, Welding equipment review, welding Materials,
during welding process should be responsible for - Monitor, Post welding review, repair & correction.
Weld Map, Weld Joint Efficiency, RT Offer, RT Film Interpretation.
Educational Qualification:
Degree
Institute
University
Percentage
B.E. MECHANICAL
BMIT, Solapur
Solapur university
60
12 th
KBP Mahavidyalay,Pandharapur
Pune Board
57
SSC
SNV, Sonake
Pune Board
63
Personal profile:
Marital status: Married.
Nationality : Indian.
Languages Known: English, Marathi, and Hindi.
Declaration:
I hereby declare that the above- mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above- mentioned particulars.
Date:
Place: Pune Mr. Maske. M .S.
Contact this candidate