Welding Safety
Resume:
JOHN JOSEPH M. SALAZAR
WELDER – GTAW/SMAW
MECHATRONICS SERVICING
INSTRUMENTATION AND CONTROL SERVICING
Roman Super highway, Tenejero, Balanga City, Bataan
Philippines – 2100
# Contact No. +63-094*-***-****
# E-mail Address: **********@*****.***
CAREER OBJECTIVE
To become part of an established and respected company that will enable to utilized my skills. As a worker, provide above quality rate of work that the company expects, always open and willing to adapt to all types of job when needed by the situation. Promote camaraderie amongst my peers and to always observe safety at work.
WORKING EXPERIENCE
Company : New San Jose Builders, Inc.
5th Avenue, 23rd St., Bonifacio Global City, Taguig, Metro Manila
(Fort Victoria Project) Nov. 03, 2012 to May 11, 2013
DUTIES AND RESPONSIBILITIES:
Pre-cast installation
Welding of plate 1F, 2F, 3F & 4F position (SMAW)
Welding of plate 1G, 2G, 3G & 4G position (SMAW)
Type of weld is fillet and butt weld
Perform and implement the work safely prior, during and after
Repair weld
Company : SB Construction and Water Treatment Corp.
Central Balanga City, Bataan May 30, 2013 to July 02, 2013
DUTIES AND RESPONSIBILITIES:
Mechanical activities
Welding support of anchor bolt in civic works
Apply and observe safety in working environment
Perform and implement the work safely prior, during and after
Company : D&Y Allied Philippines, Inc.
Brgy. Peas, Limay Bataan October 16, 2013 to March 08, 2014
DUTIES AND RESPONSIBILITIES:
Installing and welding pipe support (SMAW)
Able to follow isometric drawing
Checking the tools and materials before and after work
Cleaning the working area before and after work
Observe safety 360 degrees before starting the work
Observing and following warning sign in every area
Repair weld
Company : DAEAH PHIL. INC.
Bo. Luz Limay Bataan Mar. 09, 2014 to Oct. 05, 2014
DUTIES AND RESPONSIBILITIES:
Welding butt joint 1G, 2G, 5G, 6G (GTAW)
Able to follow isometric drawing
Checking the tools and materials before and after work
Cleaning the working area before and after work
Observe safety 360 degrees before starting the work
Observing and following warning sign in every area
Repair weld
Company : Cathay Industrial Co. (GN POWER MARIVELEZ COAL PLANT)
Alasasin, Marivelez, Bataan January 04, 2015 to March. 29, 2015
DUTIES AND RESPONSIBILITIES:
Welding butt joint 1G, 2G,3G, 4G (SMAW)
Set-up Oxy-Acetylene Gas Cutting/Welding
Cut metal mat’l using Oxy-Acetylene Gas Cutting
Able to follow instructions from superior
Checking the tools and materials before and after work
Cleaning the working area before and after work
Pull out and replace roller pulley of conveyor
Observing and following warning sign in every area
Cutting, Bending, & Heating of Bronze Plate for Generator coil connector
Heating of Bronze Plate using Oxy-Acetylene (Double Burner Torch)
Repair weld
Company : EVER PACIFIC (SUN POWER PROJ.)
Technopark, Binan, Laguna June 10, 2015 to Sept. 10, 2015
DUTIES AND RESPONSIBILITIES:
Fabricating PIPE RACKS and CABLE RACKS
Install and erection of H-beam
Set-up Oxy-Acetylene Gas Cutting/Welding
Cut metal mat’l using Oxy-Acetylene Gas Cutting and Plasma Cutting
Welding butt joint 1G, 2G,3G, 4G (SMAW)
Able to follow instructions from superior
Checking the tools and materials before and after work
Cleaning the working area before and after work
Observing and following warning sign in every area
Repair weld
Knowledge of being “FIRE WATCH”
Knowledge of being “FLAG MAN”
Company : INDUSTRIAL CONTROL CORPORATION
928 Mega Plaza Bldg. Ortigas, Pasig City Oct. 04, 2016 to July. 08, 2017
DUTIES AND RESPONSIBILITIES:
Welding butt joint 1G, 2G, 5G, 6G (GTAW) LPG and Chilled Water Pipe Line
Hydro and Pneumatic Testing
Fabricating and Installation of Pipe Support
Installation of Fan Coil Unit in Designated Location
Able to follow isometric drawing
Checking the tools and materials before and after work
Cleaning the working area before and after work
Observe safety 360 degrees before starting the work
Observing and following warning sign in every area
Repair weld
Company : ISOMETRIC ENTERPRIZES CO.
Kalayaan, Quezon City July 13, 2017 to Oct. 03, 2017
DUTIES AND RESPONSIBILITIES:
Welding butt joint 1F, 2F, 3F and 4F (SMAW) Inertia block for Cooling Pump Machine
Able to follow isometric drawing
Installation of Chilled Water Supply and Return Pipe Line
Checking the tools and materials before and after work
Cleaning the working area before and after work
Observe safety 360 degrees before starting the work
Observing and following warning sign in every area
Repair weld
PERSONAL INFORMATION
oDrivers License : C02 – 08 – 001459 Restrictions : 12
oSSS : 02 - 3488866 - 1
oPhil - Health : 01 - 051788067 - 7
oPag - Ibig : 1211 - 0185 - 8913
oTin Number : 708 – 889 – 946 - 000
oDate of Birth : December 02, 1989
oPlace of Birth : Las Piñas City, Manila
oHeight : 5’4”
oWeight : 48 kls.
oGender : Male
oCivil Status : Single
oCitizenship : Filipino
oReligion : Roman Catholic
oFather’s name : Virgilio T. Salazar
oMother’s name : Thelma M. Salazar
oTheir address : Roman Superhighway Tenejero, Balanga City
oLanguage Spoken & Written : Tagalog and English
oPerson to be contact in case of emergency : Thelma M. Salazar (094********)
EDUCATIONAL BACKGROUND
Elementary ; Tenejero Elementary School
Manahan St. Tenejero, Balanga City March 27, 2002
Secondary : Bataan National High School
Roman Superhighway, Balanga City March 28, 2009
Tertiary : Bataan Peninsula State University (Main)
Capitol Drive San Jose, Balanga City April 10, 2012
Course : Three-Years in Diploma in Engineering Technology
Major : Welding and Fabrication
Vocational Certificate
National Certificate II in Shielded Metal Arc Welding (SMAW)
Certificate No. 120***********
National Certificate II in Gas Tungsten Arc Welding (GTAW)
Certificate No. 130***********
National Certificate II in Mechatronics Servicing NC II
Certificate No.
National Certificate II in Instrumentation And Control Servicing NC II
Certificate No.
ON-THE-JOB TRAINING
Company : LN DIAZ STEEL FABRICATOR & CONTRACTOR
Phase 3 Bagong Silang, Balanga City April 18, 2011 to May 31, 2011
DUTIES AND RESPONSIBILITIES:
Welding and fabricating of gate, grills, trusses, fence, rails, etc. (SMAW)
Installation/Service
Apply and observe safety in working environment
Preparation and checking of tools before use
Company : Toyota Autoparts Philippines Inc.
Pulong Sta. Cruz, Sta. Rosa, Laguna November 10, 2011 up to May 9, 2012
DUTIES AND RESPONSIBILITIES:
Apply point and call
Implement kaizen and hiyari hatto
Apply 5’s activity before and after work
Logistics partsman using TOE CAR and TAYLOR DUNN
Deliver parts of transmission
Production support
Apply and observe safety in working environment
CHARACTER REFERENCES
Mr. Arnel Catorce
Piping Leadman (Indusrial Controls Corporation)
Okada Manila
0928 - 720 - 6209
Mrs. Andrea S. Sundiam
Welding Instructor at (BPSU) Main Campus
San Jose, Capitol Drive, Balanga City, Bataan
0921 - 415 - 7299
Mr. Israel Marquina
Piping Foreman (Industrial Controls Corporation)
Okada Manila
0949 – 598 - 2759
I hereby certify that the above information is true and correct to the best of my knowledge and belief.
JOHN JOSEPH M. SALAZAR
Applicant
Contact this candidate