Electrical Engineer Engineering

+

Resume

Italo (Mike) Parise, P. Eng. BSEE, B.A.Sc.

Metro Detroit (Clinton Township, MI 48035)

Cell 586-***-****

Email ***********@*********.***

Email ***********@*****.***

POSITION: Electrical Engineer

PROFILE: Over forty years experience in Electrical Engineering Power Distribution MV/LV Designs, Specifications, Field Engineering, Start-up and Commissioning of Industrial Facilities and Utilities.

Manufacturing Automotive Facilities-Paint Shops, Body Shops, Finish &Final Assembly, Powertrain Engine & Transmission Plants, Testing Labs-Wind Tunnels, Dyno Testing Cells; Electrical, I&C and Communication Networks for Process Equipment Integration, Automotive Office Complexes and related Facilities.

Electrical Power Distribution MV/LV systems, Instrumentation & Controls and Communication Networks for Petrochemicals, Oil Refineries Facilities, Oil & Gas Pipelines Pumping & Compressor Stations, Power Plants-Fossils and Nuclear Heavy Water Plants, Chemical Plants, Minerals Refining, Grain / Corn Milling Ethanol Refining Plants, Water-Wastewater Treatment Plants (WWTP).

RESIDENCY: United States Resident Alien (Green Card) since 1984 to present and Canadian Citizen.

EDUCATION:

UNIVERSITY: BSEE, B.A.Sc. (Honors) 1973, Electrical Engineering, University of Windsor, Windsor, ON, Canada.

Majors: Power, Controls and Communication Systems.

LICENSE / MEMBERSHIP: PEO - Professional Engineers of Ontario 1975 / 2018.

ISA – Sr. Instrument Society of America 1976 / 1999.

Technical Responsibilities and duties performed as applicable on projects:

Knowledge of codes and standards - NEC, NESC, IEEE, NFPA, NETA, NECA.

Knowledge of electrical power system studies for short circuit, protection device coordination, arc flash analysis, load flow, motor starting, etc.

Develop of power system schemes.

Develop of MV/LV substation design applications.

Develop of MV/LV single line diagrams for

Switchgear and Motor Control Centers.

Develop of electrical equipment specifications and data sheets.

Develop engineering and construction scope of work.

Develop scope of facilities and services for project proposals.

Develop engineering and design estimates for project proposals.

Develop area classification limits.

Perform and check electrical calculations.

Perform reviews and QA & QC for design documents.

Perform field verification, as-builds existing design conditions, and walk-down the field / site.

Perform electrical equipment start-up and commissioning.

Coordinate electrical design requirements with other disciplines.

Review, apply, and modify customer design standards to suit project requirement.

ISA – Instrument of America Electrical Standards

Typical Project Documents Preparation:

Meet with client to define design scope of work

Field site investigations

Design man hours estimate per drawing and tasks

Preliminary engineering construction estimate

Drawing list and legend

Equipment load list and panel schedules

Electrical One Line Diagrams

Power distribution system calculations

Site plans for power and lighting

Power distribution plan drawings and details

Power and control schematic drawings

Lighting calculations, plan and detail drawings

Lighting fixtures legend and schedules

Special systems plans and detail drawings of Fire Alarm, Security and IT

Extract instrumentation and control information from Process PID

I&C details, loops, index and drawings

Equipment wiring interconnections and bill of materials

Specifications

Construction design packages

Issue addendums and bulleting as required

Final engineering construction estimate

Review construction bid documents

RFI’s during bidding and construction phase

Field site visits during construction

Field startup assistance during construction

Manage design man hours

Manage CAD technicians and designers assigned on project

EMPLOYMENT and EXPERIENCE

2003 to 2018 Staff Contract, Self-Employed with Parteck, Inc. and IMP Electrical Engineering.

Position: Consultant, Electrical Engineer.

Duties: Provide Engineering and Technical services to companies in Canada and U.S.A.

Clients (Partial list)

Parteck, Inc.

FES, Inc, Detroit, MI (Automotive Facilities - Power Distribution MV/LV)

Chrysler Jeep Paint Shop, Toledo, Ohio (2004) 2 - Primer Oven and 4 – Base Clear Coat Paint booth lines. 4- 2.5 MVA, 13.8 KV/480V Unit Substations.

Parteck, Inc.

AMG, Inc., Dayton, OH (Chemical, Ethanol Refinery Facilities – E, I&C)

Tate & Lyle Corn Milling / Ethanol Plant, Fort Dodge, IA (2006/2009).

2-27/36/45/ MVA, 230 KV/13.8 KV Transformer, Outdoor Master Substation, 13.8 KV M-T-M 2000A, Outdoor Non-Walk-In Main SWGR, 10-1200A Feeders, 6-3.75 MVA, 4.16 KV SE & 10-2.5 MVA, 480V SE Unit Substations.

Parteck, Inc.

BEI Associates, Detroit, MI (Automotive Facilities – Power Distribution MV/LV)

Chrysler Assembly Plant Body Shop, Windsor, Ontario (2005). 4 - 3.0 MVA, 13.8 KV/480V Welder Unit Substations, 2 - 2.5 MVA, 13.8 KV/ 480V Facility Unit Substations.

Parteck, Inc.

Orbital Engineering, Pittsburgh, PA (Steel Facilities – Power Distribution MV/LV)

US Steel Plants upgrade in Detroit, MI and Hammond, IN (2010 & 2012) Upgrade of 13.8 KV, 4.16 KV and 480V power distribution for FEL Pickle- Line projects, and plant upgrade projects.

Staff Contract.

Adecco, Midland, MI (Chemical Facilities – Power Distribution MV/LV)

Dow Corning HSC Midland, MI (2010). Start-up of 13.8 KV, 4.16 KV and 480V Unit Substations, MCC’s, Power Panels, and UPS’s.

IMP Electrical Engineering.

Consulting Engineering Toronto, ON (2012) for Toronto TTC, 5-subway stations expansion. Bid, review and analysis of switchgear for 5 - 27.6 KV two utility source substations, 4 – 3000 KVA, 27.6 /4.16 KV double-ended substations, 7-2000 KVA, 4.16 KV/600V double-ended unit substation, 12-2000 KVA 27.6KV/600V traction power transformers and 12-1500 KW, 600VDC rectifiers, and 12-12000A, 600VDC switchgear.

Staff Contract.

2012 - 2013 FCX / Jacobs Engineering, Denver, CO and Tucson, AZ through Associated Staffing, Inc. (ASI) Atlanta, GA. Provide Consulting Electrical Engineering services for large mining and mineral complex expansion at Morenci, AZ for Freeport-McMoRan, Inc. in design and project engineering for electrical power distribution, control & instrumentation; and Jacobs Engineering, Houston, TX through Bergaila Associates, Inc. Houston, TX in design of power distribution for oil refinery BP upgrade of Power Distribution Centers PDC’s.

Staff Contract.

2013 to 2014, Applied Power & Controls, Inc., Detroit, MI (11/13-10/2014)

Electrical Engineer on staff.

Municipal roadways and street lighting designs, power distribution for industrial facilities and Utilities.

IMP Electrical Engineering.

Applied Power & Controls, Inc. Detroit, MI (11/2014 – 4/2015)

Electrical Engineer Consultant.

IMP Electrical Engineering

Sigma Associates, Inc., Detroit, MI (5/2015 – 6/2017)

Electrical Consulting Engineer in power distribution, instrumentation & controls for industrial facilities, water and wastewater treatment plants.

IMP Electrical Engineering, Owner, Metro Detroit, MI (7/2017-present)

Electrical Consulting Engineer in power distribution, instrumentation & control systems and Marketing Services in USA and Canada.

Others 1973 to 2003

Parteck, Inc.

1999 - 2003 Roncelli Construction, Sterling Heights, MI. (10/99 - 9/2003)

Position: Electrical Project Manager & Engineer.

Parteck, Inc.

1997 - 1999 BEI Associates, Inc., Detroit, MI. (12/1997 - 3/1999)

Position: Sr. Electrical Engineer.

Parteck, Inc.

1996 - 1997 Morrison-Knudson / Washington Group, Troy, MI. (4/1996 - 7/1997)

Position: Sr. Electrical Engineer On-Site General Motors Powertrain, Romulus, MI.

Parteck, Inc.

1995 - 1996 CMG Controls, Toronto, ON, Canada and Detroit, MI (9/1995 -3/1996)

Position: Sr. Electrical Engineer / Consultant.

Parteck, Inc.

1994 - 1995 PW Associates / CKGP, Beverly Hills, MI. (4/94 - 7/95)

Position: Electrical Engineer, On-Site, GM Truck & Bus, Paint Shop, Pontiac, MI.

Parteck, Inc.

1991 - 1993 Doshi Associates, Inc., Troy, MI. (6/91 - 11/93)

Position: Sr. Electrical Engineer / Consultant.

Parteck, Inc.

1990 - 1991 CMG Controls Toronto, Ontario, Canada, and Detroit, MI (6/90 - 5/91)

Position: Sr. Electrical Engineer / Consultant.

Staff Contract.

1989 - 1990 Ghafari Associates, Inc., Dearborn, MI. (11/89 - 5/90)

Position: Sr. Electrical Engineer – Staff.

Parteck, Inc.

1988 - 1989 CMG Controls Toronto, Ontario, Canada and Detroit, MI (5/88 - 11/89)

Position: Sr. Electrical Engineer / Consultant.

Staff Contract.

1986 - 1988 Ellis, Naeyeart & Genheimer Assoc. (ENGA), Troy, MI. (7/86 – 4/88)

Position: Sr. Electrical Engineer Group Leader on Staff.

Staff Contract.

1985 - 1986: Albert Khan Associates, Inc., Detroit, MI. (4/85 - 4/86)

Position: Sr. Electrical Engineer on Staff.

IMP Electrical Engineering

1973 - 1985 I.M.P. Electrical Engineering, Ltd., Sarnia, ON, Canada. (09/73 - 3/85)

Position: President, Owner and Electrical Engineer

Duties: Engineering design services in electrical power distribution, control and instrumentation systems for oil refineries and petrochemicals plants.

Major Clients: Dow Chemicals, Esso Chemicals, Fiberglas Canada, Imperial Oil, Monsanto, Sun Oil, Sun / Shell Canadian Pipeline, Union Carbide / FW, etc.

Specifics: Primary electrical design for 34.5 KV, 27.6 KV, 13.8 KV, 4.16 KV and 2.3 KV distribution systems. Secondary electrical design for 575V, 480V, 480/277V and 208/120V distribution systems. Motor Control Centers, outdoor starter racks, grounding systems, cable tray systems, and underground ducts and manholes systems. Plant-wide lighting.

Process piping and vessels heat tracing systems. Electrical Power Distribution for Control Building Facilities & Administration Offices. Instrumentation and Control for upgrading gasoline blending systems, tank farms, fuel bulk loading terminals, crude, pretreater, reformer and catalytic cracker units utilizing conventional electronic instrumentation, PLC and DCS control systems.

Provided field engineering for designed projects, estimating, bill of materials, punch-list deficiency reports, inspection and troubleshooting of proprietary systems.

Others: Responsible for Engineering, business development, marketing, sales, administration and supervision of 50 (peak) employees on payroll comprised of engineers, technicians, drafters and clerical personnel.

Staff Contract.

1973 Coordinated Design Associates, Windsor, ON & Detroit, MI (05/73-10/73)

Position: Electrical Engineer, Protection & Control Dept., Detroit Edison (DTE),

South East MI Electrical Distribution Substation Design.

REFERENCES:

Michael Macklin. PE, President, APC, Inc. Detroit, MI 313-***-****

Scott Feller, PE, VP Engineering, AMG. Inc. Dayton, OH 937-***-****

Keith Howard, BSEE, I&C Eng. FCA, Inc., Auburn Hills, MI 313-***-****

Rafid Merem, PE, Head E&I, Brown and Caldwell, Inc. Troy, MI 248-***-****

Contact this candidate