Power Plant Engineer
Resume:
JOEL ESPINA BISCO
Blk. * Lot ** Phase II Monte Claro Homes Subd.
P.Laygo St. Sabang Lipa City Batangas
********@*****.***/*******@*****.**
KNOWLEDGE, SKILLS AND ABILITIES:
Effective interpersonal and organizational skills
With computer knowledge in MS Office (Word, Excel, Power point), AutoCAD, Internet.
Able to do documentation.
Able to understand and implement technical procedures.
Very much interested to work in technical environment.
Able to work professionally with all levels of client organizations staff.
Self-directed, able to prioritize and effectively handle multiple service requests at a time under high pressure and challenging situations.
Work Experience:
DESCO (Integrated Solutions for the Energy Sector) SERVICE ENGINEER
February 2014 - Present
DUTIES AND RESPONSIBILITIES:
Assist on the costing, quoting, preparation of bidding proposal and documentation.
Assist Project manager on the implementation of project.
Responsible for the maintenance and repair of Jenbacher Gas Engines.
Responsible on the mechanical, electrical and instrumentations installation during project implementation.
Use hand tools and small power tools to conduct general maintenance of GE Jenbacher Gas Engines
Troubleshoot complicated mechanical, hydraulic, and electrical problems on gas engines and control systems
Help in all areas of site operations as directed by the manager with minimal supervision
Perform all mechanical, hydraulic, and electrical component maintenance, repair or replacement of parts to correct malfunctions
Work effectively as part of a team of technicians or independently. Work Experience:
DESCO (Integrated Solutions for the Energy Sector) PROJECT COORDINATOR
Project – INSTALLATION OF 2.5 MVA TRANSFORMER
CBK Hydro Power Plant Kalayaan, Laguna
November 20, 2017 – December 30, 2017
Job Duties and Task
Prepare safety work permit.
Assist Electrical Supervisor on the implementation of activity and documentation
Assist electrician, fitter on the lifting, dismantling and installation of the transformer.
Monitor the delivery of material supply for mechanical and electrical consumables.
Prepare daily report, weekly report and progress report.
Preparation and reviewing of drawing for mechanical and electrical installation.
Coordinate the client for the other concern & issues.
Coordinated with various engineering disciplines for completion of work.
Assist sub-contractor on the installation of bus duct system, testing and termination of primary cables.
Monitoring of transformer and LVSG for temperature, current and voltage.
Assisting in pre-commissioning and commissioning of 2.5 MVA transformer. Work Experience:
DESCO (Integrated Solutions for the Energy Sector) PROJECT COORDINATOR
Project – Installation of GE CONTROGEN HX Automatic Voltage Regulator (AVR) CBK Hydro Power Plant Caliraya, Laguna
October 2, 2017 – November 17, 2017
Job Duties and Task
Prepare safety work permit.
Assist Supervisor on the implementation of activity and documentation
Assist electrician, fitter on the lifting, dismantling and installation of the AVR.
Prepare daily report, weekly report and progress report.
Reviewing of electrical wiring diagram and mechanical installation.
Coordinate the client for the other concern & issues.
Coordinated with various engineering disciplines for completion of work.
Loop checking of cables, phase rotation and insulation resistance test.
Assist the commissioning engineer in pre-commissioning and commissioning of AVR. Work Experience:
DESCO (Integrated Solutions for the Energy Sector) PROJECT COORDINATOR
Project – Installation of GE CONTROGEN HX Automatic Voltage Regulator (AVR) CBK Hydro Power Plant Kalayaan, Laguna
July 6, 2017 – August 2, 2017
Job Duties and Task
Prepare safety work permit.
Assist Supervisor on the implementation of activity and documentation
Assist electrician, fitter on the lifting, dismantling and installation of the AVR.
Prepare daily report, weekly report and progress report.
Reviewing of electrical wiring diagram and mechanical installation.
Coordinate the client for the other concern & issues.
Coordinated with various engineering disciplines for completion of work.
Loop checking of cables, phase rotation and insulation resistance test.
Assist the commissioning engineer in pre-commissioning and commissioning of AVR. Work Experience:
DESCO (Integrated Solutions for the Energy Sector) PROJECT COORDINATOR
Project – B-3404 VIBRATION MONITORING SYSTEM UPGRADE (BN3300 TO BN3500 MIGRATION) Petron Bataan Refinery
March 20, 2017 – May 22, 2017
Role:
Prepare schedule, coordinate and monitor the assigned engineering projects.
Interact daily with the clients to interpret their needs and requirements and represent them in the field.
Attends the Weekly Progress Meetings (Internal as well as with Client).
Monitors work in progress and prepares weekly report of the status of each assignment.
Coordinates materials and assists in the logistics, its shipment and receipt at construction site.
Perform overall quality control of the work (schedule, plans, personnel’s performance) and report regularly on project status.
Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
Review engineering deliverables and initiate appropriate corrective actions.
Preparation and reviewing of drawing for mechanical installation.
Coordinated with construction team for the other concern & issues.
Coordinated with various engineering disciplines for completion of work.
Prepare of reports and documentation.
Supervise the electrician and fitter on the installation of Bently Nevada 3500 System 1, Vibration Instrument and accessories, cable pulling of Fiber Optic and electrical/instrument cables.
DESCO (Integrated Solutions for the Energy Sector) SERVICE ENGINEER
Project – Construction of ASEAGAS 8.8 MW Bio-Mass Power Plant
(Installation of J420 & J320 Jenbacher Gas Engines) Lian, Batangas
October 2015 to October 2016
Role:
Prepare schedule, coordinate and monitor the assigned engineering projects.
Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
Interact daily with the clients to interpret their needs and requirements and represent them in the field.
Assists in preparation and implementation of Project Execution Plan (PEP).
Attends the Weekly Progress Meetings (Internal as well as with Client) and assist in preparation of Minutes Of Meetings.
Monitors work in progress and prepares weekly report of the status of each assignment.
Ensuring all procedures and calculations are submitted to the client for review and approval.
Coordinates materials and assists in the logistics, its shipment and receipt at construction site.
Perform overall quality control of the work (schedule, plans, personnel’s performance) and report regularly on project status.
Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
Review engineering deliverables and initiate appropriate corrective actions.
Preparation and reviewing of drawing for mechanical installation like cooling pipe line, gas pipe line and exhaust pipe line.
Coordinated with construction team for the other concern & issues.
Coordinated with various engineering disciplines for completion of work.
Prepare of reports and documentation.
Supervise on the installation of Jenbacher gas engine, cooling pipe line, gas pipe line exhaust pipe line, radiators, instrument, Junction Box, control panel, conduit and cable pulling.
SAFETY OFFICER
Inspects the site to ensure it is a hazard-free environment.
Verifies that all tools and equipment are adequate and safe for use.
Promotes safe practices at the job site.
Enforces safety guidelines.
Conducts investigations of all accidents and near-misses.
Reports to concerned authorities as requested or mandated by regulations.
Conducts job hazard analyses.
Establishes safety standards and policies as needed.
Watches out for the safety of all workers and works to protect them from entering hazardous situations.
Responds to employees’ safety concerns.
Perform toolbox meeting before start of work.
DESCO (Integrated Solutions for the Energy Sector) SITE MECHANICAL ENGINEER
Project - 1x15 MW Circulating Fluidized Beds SMC Coal Fired Power Plant Semirara Island, Caluya Antique
February 1, 2014 up to September 2015
Role:
Preparation & Reviewing of drawings/documents like P&ID’s, Instrument list, Cable tray layout, Junction box wiring diagram, Cable schedule, Hook up.
Preparation & reviewing of drawings for fabrication of base support of control panel, JB, DCS and PLC cabinet.
Review and clarify JB Cable Schedule, Field wire termination details to main contractors.
Design & Review of JB schedule, Cable schedule, Instrument loop drawing, Interconnection wiring drawings.
Evaluated instrumentation designs on a regular basis.
Performed design reviews and participated in team meetings.
Determined instruments and their specifications for instrument and control systems
Coordinated with construction team for the other concern & issues.
Coordinated with various engineering disciplines for completion of work.
Prepare of reports and documentation.
Preparing of work schedule for the manpower’s.
Supervise in installation of instrument, junction box, control panel, local panel, cable trays, conduit and cable pulling.
Performed toolbox meeting before start of work.
Al Bateel Interiors Design
Maintenance Team Leader (General Maintenance and Facilities Department) Doha Qatar
March 10, 2011 to July 25, 2013
Role:
Troubleshoots and repairs mechanical and electrical/electronic equipment.
Plans and performs work requiring a thorough knowledge of mechanical theories and principles, properties of various materials, and principles of operation.
Installs, starts up and shuts down of machine equipment on the line in accordance with company safety procedures.
Advises operators and line mechanics of operation procedures and requirements for working safely with electrical/electronic and mechanical equipment and components.
Informs appropriate management and line mechanics of potential electrical mechanical problems and inherent dangers involved.
Maintains company-required performance and maintenance records for identified equipment.
Performs preventive maintenance functions as directed and routine machine checks for absorber, silo, AHU, FCU, chiller, CNC machine, destroyer machine for wood, thicknesser, circular saw, rip saw, surface planning machine, pressing machine, sanding machine, spindle moulder machine, dowelhole-drilling machine, edge bander machine.
Assists maintenance personnel with technical troubleshooting.
Assist the operator safely to operate motorized equipment.
Coordinate multiple tasks in a fast-paced environment.
Participate in a teamwork atmosphere and contribute to various continuous improvement projects and processes.
Follow work instructions, procedures and policies.
Maintain a clean, organized and safe work environment; responsible for proper waste disposal.
Communicate effectively with others using both oral and written communication skills.
Performs other duties as required
MONDE M.Y SAN CORPORATION
Cainta Rizal
Wrapping Maintenance Assistant Supervisor and Calibration July 27, 2009 –March 7, 2011
Role:
Perform general and preventative maintenance on wrapping machine, packaging machine troubleshoot and conduct repairs of other machines in used.
Record maintenance actions on work orders.
Perform general mechanical works, electrical system, repairs and construction tasks, as necessary.
Responsible for machine that performs one or more packaging functions like wrapping machine, taping machine, metal detector, kanie band sealer and foot sealer.
Assist outside contractors in the performance of maintenance tasks.
Assist in developing and implementing a comprehensive preventive maintenance log system for maintenance equipment division.
Prioritize the daily workload to effectively address issues involving the plant facility and maintenance.
Assist with safety areas assuring all maintenance team members utilize appropriate personal protective equipment.
Calibrate pressure gauge, digital weighing scale, calliper digital and manual, infrared thermometer, and probe thermometer.
Assist in preparing working schedule of maintenance personnel.
Perform other duties as directed.
MIESCOR BUILDERZ INC. (subsidiary of MERALCO) Quezon City, Philippines Internship – Estimating Division
Role:
Assist in other basic calculations, drawing and other requirements.
Assist in documentation and analysis of findings.
Responsible for performing other tasks under the direction of senior engineer.
Done various duties associated to technical and other related engineering works. Training / Education:
Safety Officer Training (BOSH) – PEME Consultancy, Inc. – Edsa Shangri-la Mall February 28- March 3, 2017
FTB – Field Tech Basic Training – GE Jenbacher Gas Engine – Cebu, Philippines January 26, 2016
FTA – Advanced Field Tech Training – GE Jenbacher Gas Engine – Cebu, Philippines May 25, 2016
Field Service Engineer Mechanical Level 1 – GE Jenbacher Gas Engine – Cebu, Philippines December 12, 2016
Safety Officer Training – The International Welding Safety Foundation – Lipa City Batangas, Philippines November 2013
Auto CAD 2009, MICROCAD Technologies Co. Inc., Manila, Philippines June 2 – 15, 2009
Bachelor Degree in Mechanical Engineering, Technological Institute of the Philippines (TIP, Manila) June 2003 to October 2008
Personal Information:
Civil Status – Married
Birth date – August 15, 1986
Religion – Roman Catholic
Nationality - Filipino
Contact this candidate