Engineer Mechanical
Resume:
Resume
Deekae Barido Tammy (AWS CWI certified) registered member of
(COREN)
# * ***** **** ******, *** Rumoukwurushi layout pipeline Port Harcourt Tel: 080*-***-****, 080*-****-*** Email: *******@*****.*** Profile
A Mechanical Engineer with AutoCAD design experience, very familiar with API.STD.510, 570 and other international code like API 1104.Undergone some Industrial Safety professional training level 3. Highly exposed to Tank Farm Construction, supervised the fabrication and construction of Oando tank farm in FOT Onne.
Good in choice of welding electrodes/ filler wires .Experienced in visual inspection VT, UTM, MPI, PT and radiographic inspection (RI), good in Internal audit. Good in visual inspection and technical report writing, worked with standards and codes for best performance and best practices.
Good in thermograghic shooting and temperature trending. (ASME ptc-19.3) Sound in writing work procedure and welding procedure specification (wps) in compliance with (ASME SECTION IX) and (ASME B 31.3)/(ANSI Z49.1) safety in welding and cutting and allied processes.
Ability to take initiatives, improve processes and meet time-sensitive deadlines. Proficient in MS-Word, MS-Excel, MS-PowerPoint, AutoCAD and internet surfing, Fluent in both spoken and written English.
Experiences
A certified AutoCAD/ Designer engineer with over 2 years practical experience with
(DBN)
Had a level three (3) in HSE, (NISP level 3 certified) HEMP etc.
Certified in PT, UT, RI and MPI, trained on workshop advance fabrication.
A team player, excellent communication skills, good public relation and a happy young man.
Currently working as the senior plant Inspection Engineer with Notore chemical Industry Limited.
Experienced statutory inspection Engineer/Lifting Equipment.
Certified internal auditor by IRCA CERT. NO. 1618143 (in view)
Member American welding society.
Member Nigeria society of engineers.
Member Coren
AWS CWI certified.
Trained and certified in FLIR E60.
2
Trained and certified in SDT 270. (Ultra sound solution for traps/Echanger leak detections).
Educational Background/ Certification
PGD Business Administration NOUN Port Harcourt (2013) PGD in Production Engineering: University of Science. & Tech. Nkpolu Port Harcourt
(2005)
B.Eng. in Mechanical Engineering: University of Port Harcourt (2001)
GCE/SC: St. Aquinas Sec. Sch. Eleele and Com. Sec. School. (1994)
Kono Secondary School Kono (2002)
Job Experience and Workload
1 Company: National fertilizer company (NAFCON), Onne. Position Held: Industrial attachee
Duration: October 1997 - January 1998
Responsibilities: Plant maintenance and servicing of valves in ammonia plants.
Hydro-jetting and hydro testing of the exchanger.
Repairs and servicing of Compressors and pumps.
Other technical operations during turnaround
maintenance TAM.
2 Company: B J Services
Position Held: Industrial attachee (Stimulation Engineer Trainee) Duration: August 1999 – January2000
Responsibilities: Well Analysis and stimulation.
Analysis of excessive Water Production and application of chemical for H2O shut up.
Calculation of the chemical recipes and Volume.
Pig launching and receiving trap and pigs tracking.
Desanding Operation on Soku/Bukuma Creek Pipeline
Tubular/Casing Operations
Involve in the preparation of Job tender for Pecten Cameroon and was responsible for tender delivery.
3 Company: Ascot Oil and Gas (now Ascot Fabrication & Construction) Position Held: Assistance Supervisor
Duration: April 2002 - December 2003
Responsibilities: Supervision of Construction of EPC Tank Farm owned by Ocean and Oil Nigeria Ltd
Supervised the laying of (1.4km) pipe from Tank Farm to the Federal Lighter Terminal.(FLT)
Supervision of Tank erection.
Managing Community Affairs, Health, Environment & Security Issues.
3
Keeps electronic copies of tools box talk.
Inspection of weld for defects and prepared repairs procedures.
Preparation for Quality control plan
4 Company: Saint Jude College Ugbengun, Edo state. Position Held: Teacher (NYSC)
Duration: Sept. 2003 - Sept. 2004
Responsibilities: Teaching physics/mathematics
Curricular Development & Carrier Counseling
Organizing School sports.
4
6 Company:
Notore chemical Industries Onne
Technical services, General engineering.
5 Company: Delattre Bezon Nigeria Limited
Position Held: CAD Engineer in proximity Department. Duration: 6 th August 2007---Feb.2008
Responsibilities:
Preparation of the Isometric drawing and ensure fabrication is done to scale.
Modification AMD 125 a water injection hook-up well owns by EPNL a short spool of about 2M with a flow meter (vortex) preparation of the WELD MAP FOR AS BUILT DRAWINGS.
Modification of the Isometric drawings of IBEWA 15/16 Project a 1” methanol line and 6” and 8” gas lines supervised by Engr. Omotayo Obagbemi.
I prepared the instrument loop diagrams the support drawings and the P&IDs Diagram and the bill of material using COUVEY AND TROUVEY Engineering designed hand book.
Involved in the structural designed and reconstruction of a sea water filter at Anenam supervised by Engr. Malaty.
Preparation of BEME
Prepared the TECH.PROPOSAL of FSO unity mooring hawser retrieval system (winch) installation with REF: NG5397/C&P/ 07.
Prepared the TECH.PROPOSAL of ODD 13 GAS PRODUCER WELL HOOK UP piping work (Total fina elf.)
5
Position Held: Plant –inspector,{Snr. Inspection engr (team lead} Duration: 6 th Feb. 2008 till date.
Responsibilities:
Carried out inspection on cryogenic tanks,
BOILERS, HP Vessel, pumps. Stack, hood and other
statutory equipment and issued reports.
Carried out inspection on overhead gray sling and issued report.
Witness relief valve pop test and online valve setting.
Monitored, calculate and analyzed monthly corrosion coupon results on the cooling water system.
Ability to carry out positive material identification
(PMI) on purchased materials.
Ability to supervise lining of equipment like ACID TANKS and others.
Monitored temperature on the reformer catalyst tubes
(thermograghic shooting) and analyzed results
Team member to expert on exchangers eddy current test (cleaning).
Ability to write DEHYDROGENATION PROCEDURE
(PWHT) and STRESS RELIEVING) Welded materials
Carried out daily routine plant inspection and issued field report when necessary.
Issued report on subsidence and supervised repairs when necessary.
Ability to prepare welding procedures and as API 1104.
Inspection of sand blasted /mechanical
Cleaned surfaces as per SA 21/2 etc. and approved
Where necessary. Using ECO-METER film thickness
measurement.
6
Ability to carry out shut down and online inspections. Ability to inspect stamicarbon equipment like the HP vessels e.g. Urea reactor, scrubbers, hydrolyzer etc.
Very conversant with the inspection of on line
equipment inspection e.g. Condensate polisher.
Very conversant with the application of GM08 Gauss meter for magnetic flux reading and demagnetizing
in case of high magticflux,
General plant inspection.
OPERATE ON Principle of ALARP and ISO 9001 2008 QMS.
(Work with ECM GROUP)
Degree Research/project.
Pigging Operation in industrial Pipe-lines: A Case Study of Soku and Bukuma creek Pipeline - a Project in partial fulfillment for the award of Bachelor of Engineering degree, (B.Eng.) 2000.( very experienced in re-boiler /boiler inspection). Personal Data:
Sex: Male
Date of Birth: 10th May.1975
Home Town: Baen Town
Local Govt. Area: Khana
State Of Origin: Rivers- State
Marital Status: Married
Religion: Christianity
Postal address: No. 9B Wuche Close Rumoukwurushi Port – Harcourt OR Notore Chemical Industries Onne. (Former Nafcon complex.) 7
Hobbies:
Learning.
Referees:
1. Jeff Needam Deekae
Ammonia manager.
Notore chemical Industries
Production Department
Ammonia plant
2 Engr. Omotayo Obagbemi.
Delattre Bezon Nigeria Limited
Proximity Department.
Plot 170 Trans - Amadi
080*-***-****, 080*-***-**** 2
3, Magnus Alobari
Head General engineering unit
Technical services Department
Notore Chemical Industries plc.
Onne, complex.
Signature/ Date: TAMMY_
Contact this candidate