Project Design

AZHAR OMRAN

RESUME

PERSONAL DETAIL

Designation : SNR PIPING DESIGNER

Name : AZHAR BIN OMRAN

Address : No. 22 Jalan Prima,

Taman Puchong Prima,

***** *******,

Selangor.

Birth. : 27 January 1974

Marital Status : Married

Nationality : Malaysian

Telephone No : +601*-***-****

Email Address : *******@*****.*** (Personal e-mail)

******@*****.*** (Personal e-mail)

EDUCATIONAL and QUALIFICATIONS:

Tertiary Level : 2006 2009 Universiti Teknologi Malaysia

Executive Diploma in Plant Technology,

Piping & Plant Layout Design

: 1995 1996 Institut Kemahiran Mara, Kuala Lumpur

Advanced Mechanical Engineering (Oil & Gas)

: 1992 1994 Institut Kemahiran Mara, Johor Bahru

Certificate Mechanical Engineering.

ADDENDUM

- Certificate of Auto-Cad Level I & II from Universiti Teknologi Malaysia

- AVEVA Laser Model Interface

COMPUTER SKILL

1) PDMS & Multi Discipline Support (MDS)

2) Well versed in Auto-Cad.

SUMMARY OF EXPERIENCE

More than 22 years experience in Oil and Gas Industry. Involved in Mechanical Piping Design, 3D

Modeling and Drafting for Offshore, Onshore and Petrochemical Industry. Able to work in PDMS, Auto-

CAD or manually drafting. Scope of work includes preparation of piping general arrangement drawings,

piping layout, pipe support details, pipe support location, MTO.

1

AZHAR OMRAN

RESUME

PRESENT EXPERIENCE

April 2017 to current : Shapoorji Pallonji Oil & Gas Ltd.

Designation : SNR. PIPING DESIGNER

Project Involved:-

April 2017 Present : KAKINADA FPSO FEED study

Oil and Natural Gas Corporation Ltd.(ONGC)

Task completed including:

- Prepared and arrangement equipment layout and escape route.

- To perform piping design for 6 and above up to 30.

- Prepared Bulk MTO for 6 and for carbon steel and 4 and above for stainless steel

- Area lead for Booster Export Gas Compressor

- Attend project review meetings, vendor meetings, engineering meetings, as required.

Feb 2017 to April 2017 : Ranhill Worley Parsons.

Designation : SNR. PDMS DESIGNER

Project Involved:-

Feb 2017 April 2017 : BUL HANNIE field FEED study

Qatar Petroluem.

Task completed including:

Bul Hanine field 4legged platform

- Prepared and arrangement equipment layout and escape route.

- To perform PDMS Model LP Production manifold.

- To perform PDMS Model Gas Lift manifold.

- To perform piping design for 6 and above up to 26 line.

- Interface with other departments to obtain input for Discipline designs and drawings.

- Interface with all disciplines to develop clash free designs.

- Attend project review meetings, vendor meetings, engineering meetings, as required.

Jun 2016 to Dec 2016 : Bumi Armada Bhd.

Designation : SNR. PIPING DESIGNER

Project Involved:-

Jun 2016 Oct 2016 : ARMADA KRAKEN FPSO, Angola project. FEED Study

Oct 2016 Dec 2016 FPSO ARMADA TGT1 start up gas import FEED Study

Task completed including:

- Prepared and arrangement equipment layout and escape route .

- To perform vendor drawing checking and mark-up and update in PDMS model.

- Realize with structure dept. regarding the additional extended platform reqd, special pipe support and etc.

- To perform piping design for process line, utilities lines, drain line and etc. in PDMS model.

- Interface with all disciplines to develop clash free designs.

- Interface with other departments to obtain input for Discipline designs and drawings.

- Attend project review meetings, vendor meetings, engineering meetings, as required.

2

AZHAR OMRAN

RESUME

Mac 2015 to Dec 2015 : Blackstone Process Solution (BPS) Sdn. Bhd.

Designation : LEAD DESIGNER

Project Involved:-

Mac 2015 Dec 2015 : Ghana OCTP Offshore FPSO

ENI Ghana Exploration and Production.

Lead piping designer for two module, Utility Module and Chemical Injection Module.

Task completed including:

a. Design Review 30%, 60% and 90% at Singapore client office.

b. Piping design:-

- updating PDMS model per revised P&ID, vendor data, review comment etc

- Component request to PDMS admin

- provide markup on equipment GA drawing whenever necessary

c. Pipe support

- To check pipe support span via isometric and PDMS Model and ensuring clash free.

- To ensure all stress requirements and needs were strictly followed and meet the strength requirements

- Liaise with structure engineer to endorse the huge support design; especially those more than 1 metric ton.

d. Isometric issuance. IDC and IFC.

e. Prepared equipment layout and escape route.

Nov 2006 to Dec 2014 : SBM OFFSHORE

Designation : LEAD DESIGNER (Gr. 9)

Project Involved:-

Mac 2013 Dec 2015 : BC10 RIS & BC10 LQ (Brown filed)

Initially assigned to the project for pipe support scope only. Then eventually took greater scope and

responsibility into Lead Piping Designer.

Task completed including:

a. Progress reporting

b. Piping design:-

- updating PDMS model per revised P&ID, vendor data, review comment etc

- Component request to PDMS admin

- provide markup on equipment GA drawing whenever necessary

c. Pipe support - PDMS modeling, detailing and cadding.

d. Isometric issuance

Dec 2012 Feb 2013 - SIAKAP NORTH PETAI DEVELOPMENT

- Lead Designer in overall piping design activities for Module 23 & Module 07.

Mainly updating the PDMS model and isometric issuance.

- Fully in charge for Module 07 when Lead Designer has demob to other project

Mac 2011 Nov 2012 - FPSO XIKOMBA, ENI ANGOLA SPA (Detail design)

- Marine designer Piping Upper Deck

- Pipe modeling Tank Heating, COW & Non hazardous and hazardous drain at upper deck area.

- Prepare demolition pipe work scope for construction in PDMS model.

- Checking pipe clashes against Scopus and existing module

- Liase with other discipline e.g Structural & Marine (if there any issue concern).

3

AZHAR OMRAN

RESUME

- Assigned to site to solve the non-completed pipe support issue for upperdeck area. Worked closedly with

the Piping Superitendant and Lead Designer in completing the pipe support issues one by one. Proudly, all

the pipe support issues was successfully cleared in less than two month.

Dec 2009 Dec 2010 - ASENG FPSO, NOBLE ENERGY (Detail design)

- Lead Piping Designer and Firewater System and Internal Turret with 27 risers.

- Assisted Lead Designer for Design Review PDMS with client & Monaco office.

- Responsible and model for Mechanical Swiel Stack and piping interface.

- Prepared Piping GA, support location plan and help lead piping designer to set the 2D draft setting/cutting

as per project procedure in order to meeting with project requirement.

- Design Review PDMS model 30%, 60% and 90% with client and Monaco office.

- Interface and coordinate information from Safety Engineer for Firewater System.

- Responsible for routing Firewater system at Fixed part and Rotating part.

- Prepared pipe support design and detailing using MDS.

- Produced Isometric drawing, check print and done the back check.

- Produced data consistency and clash report.

- Update comment and incorporate P&ID.

- Incorporate stress line from stress engineer for firewater system.

- Clear design review comment and DCF.

- Project review by using review reality for internal project meeting (if there any conern from other party).

- Reliase with other discipline e.g Structural, instrument & electrical (if there any issue concern).

April 2009 Nov 2009 - ENCANA - DEEP PANUKE PROJECT (Detail design)

- Prepared FW (deluge) system this project.

- Responsible PDMS model

- Discuss with safety engineer.

- Clear Design Review Comment.

Feb 2009 April 2009 - SUNRISE TURRET WOODSIDE (Feed)

- Lead Designer for PDMS model.

- Prepared plot plan General Arrangement dwg.

- Attending internal meeting

Nov 2008 Feb 2009 - BENITA FPSO - NOBLE ENERGY BENITA EQU (Feed)

- Responsible for design of turret and module in PDMS Model

- Provide 2 option for this project:-

i) Spread moored with diluent and without diluent

ii) Turret

- Prepared plot plan General Arrangement dwg.

Aug 2008 Nov 2008 - RUBY EXTERNAL TURRET MISC (Detail design)

- Assisted Lead Designer for 90% Design Review meeting.

- Routed all pipe Fixed Part and Rotating Part of turret.

- Arranged all I-Tube at chaintable with structural dept.

- Responsible in Pipe support design and detail as well as structural pipe support drawings.

- Produced isometric drawing, against data consistency & clash check.

- Handled Site Technical Query from yard

4

AZHAR OMRAN

RESUME

July 2007 Aug 2008 - MOPUSTOR TALISMAN ENERGY YME NORWAY (Detail Design)

- Responsible in process piping and utility piping as per P&ID

- Modeled equipment as per vendor input

- Pipe support design.

- Produced isometric drawing & pipe support.

- Produced Data Consistency & Clash Check.

- Re-Model and checking equipment as per vendor drawing follow project instructions.

- Piping design (vessel trim ) based on P&ID

- Produced isometric drawing and done for back check.

- Produced data consistency and clash report.

- Pipe support modeling and modification as per instruction by piping lead as well as pipe support location

plan.

- Re-Model and checking equipment as per vendor drawing follow project instructions and after 60% 90%

design review. (Area M21W, M22W and M23W)

- Reliase with others discipline e.g structural, instrument and electrical (if there any issue concern).

Nov 2006 July 2007 - SU TU VANG EXTERNAL TURRET TANKER PACIFIC OFFSHORE PTE

LTD. (Detail Design)

- Lead Piping Designer

- Model all pipe, equipment, pipe support, structural member at fixed part and rotating part of turret.

- Piping design as per P&ID and project instructions. (Fixed Part and Rotating Part)

- Produced isometric drawing, support design and detail.

- Reliase with other discipline e.g structure, instrument and electrical.

- Set the 2D draft and setting/cutting as per project procedure in order to meeting with project requirement.

- Project review by using review reality for internal project meeting (if there any concern from other party)

PREVIOUS EXPERIENCE

May 2003 to Nov 2006 : TECHNIP GEOPRODUCTION (M) SDN. BHD.

Designation : PDMS/PIPING DESIGNER

Project Involved

Sept 2005 Nov 2006 : Petronas Carigali.

Turkenistan Block 1 Development Project.

Nov 2003 to Sept 2005 : Sarawak Shell Berhad

Design Services For E11P-B Platform & Pipelines.

May 2003 to Nov 2003 : Total Fina ELF

Maharaja Lela New Compression Module.

Responsibility

- Piping Design & 3D modeling using PDMS

- Prepared Equipment Layout, Piping GA demolition dwg, Tie-In dwg, Isometric dwg, New Existing

dwg, and 2D draft using PDMS and Auto-Cad

- Responsible for all piping drawing and drafting

- Site visit to platform.

5

AZHAR OMRAN

RESUME

PREVIOUS EXPERIENCE

Nov 1999 to May 2003 : SUMATEC CORPORATION BHD.

Designation : PIPING DESIGNER.

Field : Petro-chemical Contractor.

Project Involved

May 2002 to Dec 2002 : Esso Exploration & Production Inc. Pump Station #2

TCHAD CAMEROON Pipeline Project.

June 2001 to April 2002 : PPD Facility & West Extension Cryovac, Gebeng Kuantan

Sept 2000 to June 2001 : Petronas Propane Dehdrogenation Plant (PDH), Gebeng Kuantan

Jan 2000 to Sept 2000 : Petronas Ammonia Syngas Plant, Kerteh Terengganu.

Nov 1999 to Jan 2000 : Kerteh Polyvinyl Chloride (KPVC), Kerteh Terengganu

Responsibility

- Sketch, drawn and update isometric for small bore depend from G.A, P&ID drawing and site visit

- Prepared steam trap drawing.

- Prepared the support joints marking.

- Prepared the material take-off.

- Prepared As-built Drawing.

- Prepared summary pipe support for small bore piping.

- Indicating spool number, joint number, shop welding and field welding symbol on the isometric drawing.

- Revised drawing. (P&ID, G.A. and ISOMETRIC)

- Revised isometric drawing following from F.T.R (Field Trouble Report) and S.I. (Site Instruction)

- Revised isometric drawing following from site modification.

- Update drawing base on line checking comment to be clear the package.

- Prepared the hydro test package for piping system.

- Prepared hydro test package for line checking (Punch List).

- Review the hydro test package for piping system.

- Line checking and calculate total Dia-inch.

- Key-in all weld number base on Quality Control Report (Q.C.)

- Discussion with supplier for material

- Responsible for the drafting and preparation drawing.

- Prepared Hand Over Documents to client.

- Responsible for co-ordination of shop drawing with sub-contractor.

- Prepare of necessary documents drawing for project requirements.

PREVIOUS EXPERIENCE

May 1999 to Nov 1999 : M.W. KELLOGG BROWN & ROOT LTD SINGAPORE (KBR)

Designation : SNR PIPING DRAFTSMAN. (Contract)

Field : Petro Chemical & Power Industry.

Project Involved : Exxon Esso Chemical Singapore LTD.

Responsibility

- Preparing and checking isometric revision / spool.

- Key in transmittal, MTO spool number for designed areas.

- Sketch isometric for small bore and drawn isometric for GA drawing and P&ID.

- Indicating spool number, added joint number, shop welding and field welding symbols on isometric

drawing.

- Checking and reporting the spool drawing for error.

- Revised and update shop drawing and master drawing.

6

AZHAR OMRAN

RESUME

PREVIOUS EXPERIENCE

Feb 1999 to May 1999 : EQUATOR ENGINEERING SDN. BHD.

Designation : SENIOR PIPING DRAFTSMAN. (Contract)

Field : Petro Chemical contractor.

Project Involved : Ployplastic Asia Pasific Sdn. Bhd.

Responsibility

- Preparing and checking pipe support, structural and pipe rack MTO.

- Preparing isometric spool list, structural list and pipe support list for the designed areas.

- Sketch isometric for small bore and drawn isometric from G.A drawing and P&ID drawing.

- Indicating spool number, joint number, shop welding and field welding symbols on the isometric drawing.

- Checking and reporting the piping welded dia-in at site compared to the isometric drawing.

- Revised and update shop drawing.

PREVIOUS EXPERIENCE

June 1996 to Feb1999 : WAWASAN FABRICATION SDN. BHD.

Designation : PIPING DRAFTSMAN.

Field : Oil & Gas fabricator

Project Involved : KLIA-Cogeneration / district cooling plan

: Esso Refinery, Port Dickson.

Responsibility

- Preparing isometric spool list, structural list and pipe support list for the designed areas.

- Indicating spool number, joint number, shop welding and field welding symbols on the isometric drawing.

- Sketch isometric for small bore and drawn isometric from G.A drawing and P&ID drawing

- Draft and design different areas of plan including pump house, pipe rack and plant expansion.

- Responsible for the drafting and preparation drawing.

- Revise and confirm As-Built drawing.

- Responsible for co-ordination of shop drawing with sub-contractor.

- Preparation of necessary documents drawing for project requirements.

- Prepare drawing list & submittal according form client reference.

- As a cad controller for project to produce and control document & drawing.

PREVIOUS EXPERIENCE

Des 1993 to July 1995 : SIME SEMBAWANG ENGINEERING SDN. BHD.

Designation : CAD PIPING DRAFTSMAN

Field : Oil & Gas Contractor.

Project Involved : Dulang C (Petronas)

: Guntong D Platform (EMPI)

: Jernih A Platform (EPMI)

: M3-PQ-A Integrated Deck (Sarawak Shell Bhd)

: M3-PQ-A Living Quartes. (Sarawak Shell Bhd)

: M1PQ-A Living Quartes. (Sarawak Shell Bhd)

7

AZHAR OMRAN

RESUME

Responsibility

- Sketch isometric for small bore and drawn isometric from G.A drawing and P&ID drawing.

- Preparing and checking pipe support, structural and MTO.

- Preparing isometric spool list, structural list and pipe support list for the designed areas.

- Indicating spool number, joint number, shop welding and field welding symbols on the iso dwg

- Checking and reporting the piping welded dia-in at site compared to the isometric drawing

- Responsible for the drafting and preparation drawing.

- Revised and update shop drawing.

- Prepare drawing list & submittal according form client reference.

REFEREE

Relatives : Ir Mohd. Azwira Bin Mohd Azmi

MMHE Engineering Manager

Tel No. : +601*-***-****

Relatives : Hj Abdul Rahman Bin Matali

Piping Designer coordinator, SBM Offshore.

Tel No. : +601*-***-****

8

Contact this candidate