Engineer Project
Resume:
Professional Resume
Name: CECILIO ALVAREZ ASILO
Position: CSR / Construction Engineer / Lead Structural / Civil Engineer / Project Engineer
Function : Project Management
Design & Engineering
Construction
Fabrication
Total Years Experience: 30
Contact No: +63-916******* & +63-995******* (Philippines)
Nationality: Filipino Born: November 22 1963
Qualifications: Bachelor of Science in Civil Engineering (Licensed Civil Engineer 0043407)
Member – Philippine Institute of Civil Engineer
Skills and Other : STAAD PRO, Excel, Word, Power Point etc.
Training : Basic Offshore Safety Induction and Emergency Training (BOSIET) which includes
Basic offshore Safety, Sea Survival and Helicopter Underwater Escape Training (HUET)
Including EBS, Basic Fire Fighting, First Aid CPR /EAR ( OPITO, till 21 November 2016)
Permit To Work Authorization which includes Cold Work Permit, Hot Work Permit,
Isolation Permit & Confined Space Entry Permit by KJO (Kuwait Gulf Oil Company &
Aramco Gulf Operations Company) valid till March 3, 2017.
Saudi Driving Licence No: 226******* valid till December 2018
Languages: English, Malay, Filipino (all fluent)
EXPERIENCE SUMMARY
More than 30 years extensive and continuous experience in multidisciplinary works for both onshore and offshore projects and had worked for clients/operators, consultants, EPCC contractors and Fabricators. Experienced in the field of project management, engineering, design, fabrication, construction, pre-commissioning, installation, commissioning and start up. Responsibilities have included project management and supervision of various construction projects, engineering works ranging from drafting, design, planning, scheduling, supervision, technical evaluations and cost estimates of various marine, oil and gas structural frameworks for overseas and local projects. Developing detailed work scopes, procedures and schedules. Design calculations for weighing, lifting and loadout procedures for offshore structures like Substructures/Jackets, Central Processing Platforms, Compression Modules, Topsides, Living Quarters, modules for FPSO/FSO both Greenfield and Brownfield, etc and onshore projects, Refineries and Petrochemical Plants, Power Plants or Cogeneration, Warehouses, Paper Mills, Rubber factories, Fabrication Shops. Modular Construction like Pre-Assembled Racks (PAR’s), Pre-Assembled Modules (PAM’s), Pre-Assembled Units (PAU’s), Local Equipment Rooms (LER’s), Local Control Rooms LCR’s), Substation and HVAC Modules for oil and LNG plants. Familiar with Exxon Mobil, Total, Shell. British Petroleum, Chevron, Petronas Carigali, Hess, Japan Vietnam Petroleum Company, OMV, Daewoo Exploration and Production, Saudi Aramco, AISC, API, ABS, ISO, DNV, BS, Lloyds, ACI, IBC and other standards. Knowledge of NDE principles as well as protective coating.
JUNE 2015 – MAY 2016
AMEC FOSTER WHEELER / ZADCO (JOINT VENTURE OF ADNOC & EXXON MOBIL)
STRUCTURAL SUPERINTENDENT / SUPERVISOR
Project Management Team ZADCO UZ750 Island Surface Facilities Project EPC2 ( SSL Yard at Musaffah Abu Dhabi and Lamprell Yard, Port Khalid Sharjah United Arab Emirates)
1. Project Management Team supervising EPCC contractor for the US$5.5 Billion Island Surface Facilities
(EPC-2) Project for ZADCO UZ750 United Arab Emirates Packages.
2. Manage/coordinate all structural and piping aspects on site.
3. Provided company information and data as required by EPCC contractors.
4. Reviewed, checked and authorized all fabrication/construction documents, procedures and
drawings and ensured adequacy and compliance to standards and specification issued thereto.
5. Provided technical advice on designs, construction or program modifications and structural repairs.
6. Monitor and inspect project sites to check progress and ensure conformance to specifications and 6
safety standards.
7. Ensured all structural engineering issue, Technical Queries (TQ) or Site Queries are timely
resolved, properly monitored and documented.
8. Monitored and ensured that all structural works performed by contractor and subcontractor complied
With Company specifications and standards
9. Ensured that the project is being done Incident Injury Free (IIF) or with Zero LTI.
10. Coordinated with other discipline engineers and site inspection team and ensure fabrication and
construction works are in line with applicable quality and technical standards, contractual
agreements and company instruction.
11. Oversaw the preparation and execution of the work and to ensure that the work is done as per
approved drawing and specification issued thereto.
12. Reviewed and approved calculations done by the fabricator and sub-contractors (i.e. temporary
supports, foundations, roads, buildings, pipe supports, lifting, weighing, loadout, etc.
13. Advised Fabrication Team Leader of problems that may delay the completion of project.
14. Act as client site representative on the absence of Lead Fabrication Manager.
15. Attended weekly progress meeting, safety meeting and Project Management Safety Walkabout..
NOV 2014 - MAY 2015
TECHNIP SA - GLOBAL CONSTRUCTION HUB
SENIOR CONSTRUCTION STRUCTURAL ENGINEER / COMPANY REPRESENTATIVE
(Al Khafji Technip Site Office and Offshore - Khafji Kingdom of Saudi Arabia)
Projects and Clients:
EPCC for Khafji Ratawi Related Offshore Projects, (KCROP) IWJ- 6 and IWJ-7 Wellhead Jackets, Control and Living Quarters (CLP), Project Distribution Platforms PDP-4 & PDP-5, LQP & OCP Refurbishments and other onshore related projects as requested for Hout and Khafji projects for Al-Khafji Joint Operations (KJO), a joint venture between Aramco Gulf Operating Company (AGOC) and Kuwait Gulf Oil Company (KGOC).
Duties and responsibilities:
As Offshore Structural Construction / Project engineer, responsible to all structural and architectural works to be undertaken. Prepared and reviewed all documents i.e. drawings, designs, modifications, technical and site queries for clients approval. Raise purchase requisitions for all materials and equipment required to complete the offshore works. Managed and supervised subcontractors on their work. Prepared daily and weekly reports. Ensured that all works performed complies to Client’s specification and standards. Responsible to safety with respect to discipline aspects of the job.
JUL 2013 - JUNE 2014
SAPETRO (SOUTH ATLANTIC PETROLEUM LTD. BENIN SA) / ILF ENGINEERS
LEAD OFFSHORE STRUCTURAL ENGINEER / SENIOR CIVIL ENGINEER
Project Management Team ( SAPETRO Towers Victoria Island Lagos Nigeria & Cotonou Benin )
1. Project Management Team supervising EPCI contractor for Conductor Supported Platform (CSP)
Onshore Processing Facilities, Pipelines, Risers and other components for SEME Field
Redevelopment Project for Offshore Benin.
2. Manage/coordinate all civil & structural aspects, Reviewed and approved contractors project
execution plan, Basis of Design, Scope of Work, Specifications, Progress Reports, drawings,
designs and other structural deliverables.
3. Provided company information and data as required by EPCI contractors.
4. Reviewed, checked and authorized all fabrication/construction documents, procedures and
drawings and ensured adequacy and compliance to standards and specification issued thereto.
5. Provided technical advice on designs, construction or program modifications and structural repairs.
6. Monitor testing of soils and materials to determine the adequacy and strength of foundations,
concrete, asphalt or steel.
7. Managed and supervised surveying for layout of installations and established bench mark, grades
and elevations for guides to construction.
8. Monitor and inspect project sites to check progress and ensure conformance to specifications and
safety standards.
9. Ensured all civil /structural engineering issue, Technical Queries (TQ) or Site Queries are timely
resolved, properly monitored and documented.
10. Monitored and ensured that all civil and structural works performed by contractor complied to
Company specifications and standards
11. Ensured that the project is being done Incident Injury Free (IIF) or with Zero LTI.
12. Coordinated with other discipline engineers and site inspection team and ensure fabrication and
construction works are in line with applicable quality and technical standards, contractual
agreements and company instruction.
13. Engaged in planning, scheduling, technical evaluations, estimating quantities for project feasibility.
14. Oversaw the preparation and execution of the work and to ensure that the work is done as per
approved drawing and specification issued thereto.
15. Reviewed and approved calculations done by the fabricator and sub-contractors (i.e. temporary
supports, foundations, roads, buildings, pipe supports, lifting, weighing, loadout, etc)..
16. Advised Engineering Manager/Project Manager of any required acceleration plan in order to
maintain project schedule.
17. Represent Company at Contractor’s Daily, Weekly and Monthly Meetings as well as other relevant
Safety and quality meetings and Project Management Meetings.
18. Kept Management well advised of the progress, performances, milestones, initiatives, issues and
completion dates for planning inputs.
SEPT 2011-MAR 2013
DAEWOO INTERNATIONAL CORP. (MYANMAR E&P) / COENS ENERGY
CONSTRUCTION ENGINEER / SUPERINTENDENT / SR. STRUCTURAL ARCHITECTURAL ENGR.
Project Management Team (HHI Offshore Division Ulsan South Korea)
1. Project Management Team supervising EPCC contractor for 30,000MT SHP Topsides
(Central Processing Platform) including 3,800MT SHP 215 -Man Living Quarters, Flare Boom and
Oil Gas Terminal (OGT) as part of the USD4.7Billion Phase 1 of the SHWE Gas Development Project.
2. Assigned in EPCC office and fabrication yard to manage/coordinate all aspects of the project.
3. Acted as Company Site Representative.
4. Reviewed and approved contractors project execution plans to ensure they reflect correct scope,
Schedule & logic and identify areas of concern.
5. Promoted and Steward Site Safety and HSE Performance and champion on-site safety awareness
and ensured Project is Incident Injury Free (IIF) or Zero LTI.
6. Implemented approved procedures and processes to ensure Contractor to comply with contractual
and specification requirements.
7. Reviewed, checked and authorized all fabrication documents, procedures and drawings and
ensured adequacy and compliance to standards and specification issued thereto.
8. Ensured all engineering and quality issues, Technical Queries (TQ) or Site Queries, Non
Conformance Reports (NCR’s) are timely resolved, properly monitored and documented.
9. Developed good working relationship with Contractor’s Yard Management Team and resolved
Issues and ensured fabrication scope was completed safely and to correct quality and schedule.
10. Monitored and ensured that all structural, architectural, piping, HVAC, E & I and other outfitting works
performed by contractors complied to Company specifications and standards.
11. Reviewed Contractors plans for the execution of yard fabrication, mechanical completions,
Pre-commissioning and commissioning activities and provide input where required for completion and
delivery.
12. Attended weekly Safety walkabout and provided observations and comments.
13. Managed the fabrication/construction yard team on their assigned works and ensured that Project
was constructed as per design requirements, quality standards in compliance with Company
standards, philosophies and specifications.
14. Reviewed all Variations, Change Notices and raised deviation and change request if required.
15.Applied best practices and lessons learnt in administering the execution of the work within the
fabrication yards.
16. Coordinated and Managed Interfaces with contractors and other project functional groups like
engineering, commissioning, installation, Logistics and Operations.
17. Engaged in planning, scheduling and technical evaluation.
18. Oversaw the preparation and execution of the work and to ensure that the work is done as per
approved drawing and specification issued thereto.
19. Reviewed, commented and approved calculations done by the fabricator and sub-contractors
(i.e. temporary supports, lifting, weighing, loadout, etc).
20. Coordinated with loadout contractor and Marine Warranty Surveyor. Reviewed and approved
procedures for loadout and other onshore and offshore activities.
21. Assigned offshore Myanmar as Construction Superintendent to monitor contractor and
for technical support during offshore installation and hook up of Jacket and Topside.
22. Ensured that records and final handover documentation for As-built are properly planned, compiled
and completed.
23. Advised Project Manager of any required acceleration plan in order to maintain project schedule.
DEC 2010–SEPT 2011
THAI NIPPON STEEL ENGINEERING AND CONSTRUCTION CORP. LTD.
HOOK UP ENGINEER (STRUCTURAL AND ARCHITECTURAL) Bangpakong, Thailand
Projects and Clients:
EPCC for Yetagun C Phase 4 Booster Compression Platforms consisting of Substructure (Jacket), Module Support Frame (MSF) and 3 Compression Modules (M1, M2 and M3) and Hook up and modification works with existing Yetagun A and Yetagun B for Petronas Carigali Myanmar (Hongkong) Ltd. (PCML).
Duties and responsibilities:
As a member of Hook Up and Commissioning Team, reviewed all works to be done offshore, prepared
All procedures, manpower, tools, equipment and consumables that are required to complete the hook up
works. Supervised other members of the team including subcontractors in the line of work. Deputized as
construction superintendent in his absence. Ensured that all works are completed safely, with quality and
to PCML’s standards and specifications.
OCT 2008–NOV 2010
PENSPEN INTERNATIONAL LTD. UK / AL- KHAFJI JOINT OPERATIONS
SENIOR OFFSHORE STRUCTURAL ENGINEER / CIVIL ENGINEER
Project Management Team ( KJO Al-Khafji Kingdom of Saudi Arabia)
Projects and Clients:
Project Management Services for Khafji Ratawi Related Offshore Projects, (KCROP) IWJ- 6 and IWJ-7 Wellhead Jackets, Control and Living Quarters (CLP) and other onshore related projects as requested for Hout and Khafji projects for Al-Khafji Joint Operations (KJO), a joint venture between Aramco Gulf Operating Company (AGOC) and Kuwait Gulf Oil Company (KGOC).
Duties and responsibilities:
As Senior Structural Engineer and member of Project Management Team representing the Client KJO, responsible to all structural and civil aspects undertaken by FEED and EPCC contractor. Reviewed and approved contractors Basis of Design, Scope of Work, Specifications, Technical Queries, drawings, designs and other structural deliverables. Provided company information and data as required by consultants and contractors. Performed Technical Bid Evaluations of EPCC contractors. Ensured that all works performed by contractor complied to Company specifications and standards.
JUL2006– APRIL 2008
CARIGALI HESS OPERATING COMPANY THRU GERMANISHER LLOYDS MALAYSIA
SENIOR STRUCTURAL ENGINEER
Project Management Team ( CUEL Bangkok & Laem Chabang Yard Thailand)
Projects and Clients:
CKR Riser Module 3, BMA, SYA and BLA Jackets for the USD700 Million Phase 2 Project of Carigali Hess Operating Company Sdn Bhd to be installed in Cakerawala Gas Field Development on Malaysian Thailand Joint Block Area A-18 for Malaysia Thailand Joint Authority
Duties and responsibilities:
Project Management Team responsible to all structural, architectural and protective coating aspects undertaken by EPCC contractor. Acted as Company Site Representative (CSR). Reviewed and approved contractors drawings, designs, lifting, weighing, loadout and installation procedures, WPS, Technical Queries, (TQ’s and SQ’s) and other structural and architectural deliverables. Performed technical bid evaluations (TBE). Ensured that all works performed by contractor complied to company specifications. Organised and attended project and construction meetings. Liaised with other discipline and operations on problems and proposed practical and technically sound solutions. Checked interfaces between other components of the structures on different fabrication yards. Responsible to safety on all structural and architectural aspects of the projects.
JUL 2005 - JUL 2006
PT TECHNIP INDONESIA BALIKPAPAN BRANCH
LEAD STRUCTURAL / CIVIL ENGINEER (Balikpapan Indonesia)
Duties and responsibilities:
Supervised the civil / structural section on engineering deliverables for Conceptual, Basic, Front End Engineering (FEED) or Detailed Engineering for onshore and offshore projects (Brownfield and Greenfield ) for oil companies such as Total and Chevron (Formerly Unocal). Prepared bid documents including Basis of Designs, Scope of Works, specifications, drawings and miscellaneous designs i.e foundation analysis for all equipments and calculations required to complete the project. Attended inter-disciplinary meetings. Performed site surveys and coordinated with different disciplines on components of projects. Responsible on safety on structural matters. Liaised with project, clients, contractors on discrepancies on drawings and analysis.
NOV 2003 - JUL 2005
HL ENGINEERING SDN BHD / RAMUNIA FABRICATORS SDN BHD
LEAD STRUCTURAL ENGINEER / SENIOR STRUCTURAL ENGINEER (Malaysia)
Projects and Clients:
1. 10,000 MT Self- Installing Maari Platform (consisting of base, support structure, process deck,
accommodation, helideck and crane with 2,025 square meters of available deck space) for OMV
New Zealand Ltd. to be installed offshore 80km from Taranaki, New Zealand at 102meters deep.
2. Guntong ‘F’ and Irong Barat ‘C’ Platforms for ExxonMobil Exploration and Production Malaysia, Inc.
3. E11V-B Jacket and Vent Tower for Sarawak Shell Berhad
4. BAJT-H Jacket and Topside for Petronas Carigali Sdn. Bhd
5. SFK-A Compression Platform for Sabah Shell Petroleum Company Ltd (SSPC)
6. Guntong ‘E’ 8 Legged Jacket, Tripod and Bridge Support Frame (BSF) for EMEPMI
Duties and Responsibilities:
Lead of Structural Section, Reviewed and performed design calculations and engineering analysis for foundation, temporary supports, heavy lift, weighing, loadout and ballasting, checked and prepared material takeoffs, bid documents for other projects and miscellaneous work required to complete the project. Performed technical bid evaluations of vendors including weighing and loadout contractors. Conducted site visits to verify barge stability and ensured that contractors can perform. Attended all site and factory acceptance test for all structural and architectural items. Coordinated the interfaces between different yards on components of projects. Responsible on safety on structural matters. Liaised with project, clients, vendors/contractors on discrepancies on drawings and analysis.
MAR 2002 – AUG 2003
J RAY MCDERMOTT FAR EAST, INC (VUNGTAU, VIETNAM)
PROJECT ENGINEER/DEPUTY CONSTRUCTION MANAGER
Projects and Clients:
Wellhead platform WHP-S1 Deck, Central Production Complex Bridges NBR1, NBR2 and NULQ Living Quarters of Japan Vietnam Petroleum Company, Ltd (JVPC ) for the US$500 Million Rang Dong Full Field Development Projects located in the South China Sea 134 km Southeast of Vung Tau, Vietnam.
Duties and Responsibilities:
Reported to Construction Manager and authorized to coordinate all fabrication and construction aspects of the project and to interface with other project disciplines such as Engineering, Procurement and Offshore. Acted as Construction Manager in his absence. Ensured that personnel assigned to the project and all support departments provide the services necessary for the execution of the project. Coordinated and reviewed the activities of the various departments contribution to the execution of the work that includes review of all input and changes to the Project plan during construction. Reviewed all specifications, drawings, instructions, designs and other documents from client, consultants and other and distributed to the proper personnel Implemented revisions to the Scope of Work from client and ensured that all associated contractual procedures are followed and that revisions to the plan, milestone dates and contract prices are made in an expeditious manner and relevant personnel informed. Coordinated the Site Query Procedure and liaised with other personnel involved in the project. Oversaw the preparation of material take offs and authorised the procurement of materials and services required in the further execution of the work and ensured that final material reconciliation were carried out. Submitted and reviewed with the clients all reports as per contractual requirements. Ensured that any quality and safety problem raised are actioned by relevant parties.
JUN 2000 – MAR 2002
PENANG SHIPBUILDING AND CONSTRUCTION SDN BHD
LEAD STRUCTURAL ENGINEER (Jerejak Island Penang Malaysia)
Projects and Clients:
CKR Riser Jacket, Module Support Frame (MSF), Compression Modules M1 and M2 for the US$500 Million Integrated Complex of Carigali-Triton Operating Company Sdn. Bhd.(CTOC) to be installed in Cakerawala Gas Field Development on Malaysian Thailand Joint Block Area A-18 for Malaysia Thailand Joint Authority.
Duties and Responsibilities:
Undertook and performed design analysis and calculations. Oversaw the preparation of fabrication drawings. Review the structural aspects of the job, including geotechnical issues associated with component support and movement inside the yard. Check all shop drawings and procedures to ensure a successful load out, tie down and transportation of the project. Ensure all major structural dimensional interfaces are reviewed and coordinated between various fabrication yards, contractors and subcontractors for all major fabricated items. Responsibilities also included barge stability. Performed audit on all lifting gears as well as lifting equipment and ensured that all are worthy to be used. Reviewed interface with authorized surveyors. Coordinated with clients, contractors on discrepancy on the drawings. Responsible for safety matters related to structural items.
JAN 1999 - JUN 2000
AZDAMAN SDN BHD / OIL LINE ENGINEERING AND ASSOCIATES SDN BHD
PROJECT ENGINEER / PROJECT COORDINATOR / SENIOR STRUCTURAL/ CIVIL ENGINEER (Kuala Lumpur and Selangor Malaysia)
Projects and Clients:
1. Kertih Aromatics Projects (KR-2) for Petronas National Berhad and Aromatics Malaysia Sdn. Bhd.
by Toyo Engineering Corporation of Japan.
2. Malaysia Olefins Projects for Optimal Olefins(Malaysia) Sdn Bhd by Linde AG and Samsung
Engineering Co Ltd.
3. Matriculation Buildings for the Ministry of Education by Perwaja Steel International.
4. CAP 2 Project for Flyxsis(Malaysia) Sdn. Bhd. by Stone and Webster Ltd. and MMC Engineering.
5. Angsi A and Angsi B for Petronas Carigali Sdn Bhd (PCSB).
6. Larut A for Esso Production Malaysia Inc (EPMI).
Duties and Responsibilities:
Oversaw the company’s various projects in the production of fabrication shop drawings in Malaysia and the Philippines and performs structural designs and consultation services for clients such as Namfatt Fabricators, Desa Nikmat, Tenaga Nazar, Wong Heng and Oil Line Integrated Philippines.
MAY 1998 - DEC 1998
SIME SEMBAWANG ENGINEERING SDN BHD
SENIOR STRUCTURAL ENGINEER (Pasir Gudang Johor Malaysia)
Projects and Clients:
Resak Development Field - Modules M4, M5, M6, Module Support Frames (MSF), Living Quarter and Telecom Tower for Petronas Carigali Sdn. Bhd.
Duties and Responsibilities:
Lead Structural Engineer in charge of preparation of drawings and design analysis necessary to complete the project. Prepared all calculations for temporary supports, weighing, lifting and loadout calculations for all the structural components. Performed technical bid evaluations of vendors including weighing and loadout contractors. Liaised with project team and client as well as contractors on any problems and provide quick technical solutions.
JAN 1997 - JAN 1998
PROTEK ENGINEERING SDN BHD / MALAYSIAN NEWSPRINT INDUSTRIES SDN. BHD
PROJECT ENGINEER ( CIVIL/STRUCTURAL)
Project Management Team ( Mentakab Pahang Malaysia)
Project and Clients:
RM3.2 Billion (USD1.2Billion) 250,000 MT Annual Capacity Newsprint Papermill in Mentakab Pahang, Malaysia
Duties and Responsibilities:
Project Management Team member supervising an engineering, procurement, construction and commissioning (EPCC) job. Responsibilities included developing detailed work scopes, procedures and schedules, prepare proposals and bid documents, tender bid evaluation of contractors, supervision, inspection and technical assistance provision to both vendors and contractors. Initiated weekly coordination meeting. Monitoring quality control, progress, ensured contractor’s works with plans specifications and project schedules, resolved technical queries and problems during construction, checking and approving contractors’ claims and variation orders. Coordinate engineering activities in a multidisciplinary projects and ensure timely delivery of information and deliverables.
AUG 1996 - JAN 1997
PROTEK ENGINEERING SDN BHD
SENIOR STRUCTURAL / CIVIL ENGINEER (Kerteh Terenganu Malaysia)
Projects and Clients:
1. Liquefied Bottling Plant and Firewater System for Petronas Penapisan (Terengganu) Sdn. Bhd.
2. Modification works for EPMI Onshore Slugcatcher Pit Separators.
3. Integrity checks on Guntong D, Palas A, Tapis B for EPMI's Oil Facilities Group.
4. Site Facilities and modification works for Amoco Chemical Plant (PTA in Kuantan).
5. Modification works and integrity check for Dulang A and Dulang C for Petronas Carigali.
6. Site Facilities for Petronas Penapisan (Melaka) Sdn. Bhd. (PP(M)SB).
7. Kemaman Supply Base Warehouse Extension for EPMI.
8. ULG Phase 2 Fire Fighting Upgrade for PP(T)SB
Duties and Responsibilities:
Received and reviewed the structural aspects of the job. Checked all engineering documents,and procedures to ensure the proper implementation of the job. Coordinated with other discipline engineers on the progress, clashed checks and discussed solutions. Conducted site visits for modification, verification of existing plans and provided technical assistance (calculations, drawings and other related works necessary for the job). Ensured that all works were done in accordance with standard technical specifications, design requirements and in lieu of ISO 9001.
JUL 1995 - JUL 1996
SAMSUNG HEAVY INDUSTRIES
SENIOR STRUCTURAL ENGINEER (Kuala Lumpur Malaysia)
Projects and Clients:
U$2.1 Billion 88-Floor Petronas Tower 2 Project and Skybridge for Kuala Lumpur City Centre (KLCC) known as the Tallest Twin Towers in the world.
Ampang Tower and the KLCC Suria (Retail and Commercial Centre)
Duties and Responsibilities:
Team leader in charge of checking and preparation of erection and fabrication drawings. Prepared design calculations for various connection and integrity check due to modifications and changes at site. Liaised with consultant, discussed and sought approval for all the modification and changes at site. Liaised with contractors (fabricators / erectors) regarding problems at site and provided quick technical and practical decisions required for the repairs/procedures to be done and implemented.
DEC 1994 - JUN 1995.
ZELLECO ENGINEERING SDN BHD (MRCB GROUP OF COMPANIES)
SENIOR STRUCTURAL ENGINEER ( Rawang Selangor Malaysia)
Projects and Clients:
1. 1303 MW Lumut Steam and Gas Turbine Power Plant for Asea Brown Boveri / Segari Energy
Ventures ( Independent Power Plant).
2. 760 MW Kuala Langat Steam and Gas Turbine Power Plant for ABB / Genting Sanyem Ventures.
Duties and Responsibilities:
Structural Lead Engineer in charge of undertaking dimensional calculations and preparation of fabrication and erection drawings. Responsibilities also included design calculations for various connections. Liased with contractors regarding technical problems and the necessary solutions required at site.
SEP 1993 - DEC 1994
MALAYSIA SHIPYARD AND ENGINEERING SDN BHD / OIL LINE ENGINEERING
ENGINEERING COORDINATOR (Pasir Gudang Johor Malaysia)
Projects and Clients:
2800MT.E11R - B Riser Platform Substructure and 9000 MT. MIDR-A Drilling Substructure and 7000MT piles for Malaysia Liquefied Natural Gas Dua (MLNG-2) Projects under the joint venture of Malaysia's National Oil Company, PETRONAS and Sarawak Shell Berhad (SSB) to be installed in the gas rich Central Luconia area offshore Sarawak.
Lawit 'A' Jackets, Modules, Tripod, Bridges and Living Quarters for Esso Production Malaysia Incorporation (EPMI)
Duties and Responsibilities:
Team Leader in charge of all discipline engineers for the projects. Liaised with clients on all technical aspects. Reviewed and approved all detail design (where applicable) and working / shop drawings including drawing lists required for the project execution. Checked and furnished all technical calculation details required like lifting, weighing, centre of gravity calculations. Liaised with all the discipline engineers and project team as well as the client and subcontractors regarding problems, changes and the modifications to be done. Coordinated the distribution of all drawings, equipment catalogues, operation and maintenance manuals, certificates and vendor data to relevant parties. Ensured the proper and safe keeping of all records, drawings and documents.
SEP 1991 - SEP 1993
MALAYSIA SHIPYARD AND ENGINEERING SDN BHD / OIL LINE ENGINEERING
LEAD STRUCTURAL ENGINEER (Pasir Gudang Johor Malaysia)
Projects and Clients:
1. TABU 'B' Topsides, an integrated production platform for Esso Production Malaysia Inc. (EPMI) to
be installed in EPMI Field Development 200 KM, offshore
Contact this candidate