Resume

Sign in

Mechanical Inspection Engineer

Location:
Karachi, Sindh, Pakistan
Posted:
June 12, 2018

Contact this candidate

Saeed Ahmad Bashir

(API-***,***,***)

Experience Summery

Email: ac5uu7@r.postjobfree.com, SKY ID : saeedbashir63 Phone: +971-*********, +92-300*******,+974-******** Mechanical Engineering Graduate, Integrity / Inspection professional with more than 30 + years of total experience in On- stream inspection of Static Equipment’s, RBI (Risk Base Inspection), SPM (Single point Moring) offshore, Quality Control, Shut down, Plant Turnaround Coordinator, Vender/Third party Material inspection, Steel Structure Welding & NDT with Multinationals organizations in Petrochemical and Oil & Gas Industry.

Also work as shipbuilding Engineer and construct small( pontoon,boats) and large marine vessel up to 20,000 ton.

Lead the team/participates in inspection of plant stationary equipment, including pressure vessels, columns, drums, heat exchangers, boilers, coolers, tanks, valves and piping systems. Reviewing the inspection reports with all findings, abnormalities and recommendations. Implements computerized inspection management program through Meridium

Inspection and supervising of new construction/installation of process piping, pressure vessels, Tanks, Column, Boiler and various platform structures.

Reviewing Quality Control Plan, Inspection & Test Plan, Welding Procedure, Nondestructive / destructive testing, Construction/Method Statements and maintaining Inspection & Test Plans, Quality Systems, Non- Conformance work variation systems, anomalies and punch-list.

Performing quality and compliance audits and inspections of the effectiveness, development and implementation of procedures as appropriate of new construction, repair and existing.

Familiar with relevant codes are ASME II, ASME VIII, ASME IX, ASME V, ASME B31.1, ASME B31.3, ASME B16.5, API 650, API 577, API 576 and related to in-service codes are API 510, API 570, API 571, API 580, API 579, API 653and others API recommended practices

API- 570 PIPING Inspector certificate # 64892

API- 510 Pressure Vessel Inspector certificate # 66184

API- 653 Above Ground Storage Tank Inspector Certificate # 70864

ASNT Level II in UT, RT, MT, PT.

Key Competencies

Project management skills - ability to proactively plan and co-ordinate key activities.

Strong leadership skills showing good judgment and organization skills.

Technical & commercial confidence and credibility - Demonstrates good technical and commercial understanding.

Strong analytical and problem-solving skills to handle challenges professionally & efficiently.

Excellent communication and interpersonal skills to perform well under pressure demonstrated by consistently meeting deadlines.

Influencing - Presents engaging arguments to lead and motivate others to achieve excellent results.

Is highly resilient, works with pace, focus and optimism to overcome obstacles & deliver Technical/commercial solutions. Ability to work to under pressure.

Good influencing and management skills - ability to convince the team of best practice and how to work with key clients.

Self-motivated with ability to plan and prioritized own workload in line with personal and team objectives/targets.

Demonstrable credibility with customers / accounts and internal stakeholders.

IT literate - Experience and Proficiency over engineering software's like Meridium and SAP and user of Excel, Word, Access and Power Point.

Professional Profile

Licensed Professional Engineer (Pakistan Engineering council)

Licensed Profession Engineer with Saudi Engineering council

Successfully completed the course of Corrosion in Refinery conducted by NACE.

Successfully completed training in Advance Project Management from center of continuing Engineering Education, N.E.D. University Karachi

Successfully completed Training in Integrated Management System

Successfully attended the internal Auditing (QMS) ISO 9001/2000, ISO 14001:2004 & OHSAS 18001:1999 courses from M/s. SGS in 2001.

Successfully completed eleven months training in Japan under Japan International Agency group training program in the field of Ship Building, Repair & Maintenance in the year 1995 organized by Overseas Ship Building Cooperation Agency.

Successfully completed the Training in Incident Investigation and Root Cause Analysis from SGS in 2004. Education

B.S.C Engineering in Mechanical - 1985

University of Engineering and Technology (UET) Lahore Professional Work History

1. QA/QC Manager January-To- April 2017

Emdad Services L.L.C, Abu Dhabi

Key Responsibilities

Implement the QA/QC management system at site.

Coordinate with quality inspections with all the site sub-contractors and vendors, Coordinate all nondestructive testing on site.

Coordinate with the customers representative on all quality matters.

Coordinate all receipt inspections and manufacturer site.

Distribute relevant QA/QC documentation to site subcontractors.

Verify that the quality related site activities are in accordance with the applicable codes and standards.

Participate in the site internal and external site audits.

Coordinate all the quality site inspections through the site QC inspectors.

Ensure all quality control documentation is compiled and competed for as-built hand over through the QC engineer.

Control all nonconformance reports and undertake remedial action.

Compete site quality control instructions and action remedial responses.

Review the customers specification and undertake relevant training to the site QC inspector.

Monitor the implementation of the approved site QC Plan.

Complete and coordinate the approval of the sites QC technical submittals to the customer.

Coordinate with the site construction manager on all quality issues, Coordinate and chair the QA/QC site weekly meetings with the projects subcontractor’s QC personnel.

Elaborating inspection and test programs.

Ensure the safety is adhered to at site.

Assure all technical documents relative to site quality control are status

Evaluates the qualifications of inspection personnel.

Supports the Welding & Non-Destructive Test-NDT qualification activities. 2. Sr. Inspection Engineer - December 2014- Dec 2016 Jubail Petrochemical United Company SABIC, Saudi Arabia Working as Staff Engineer Responsible for managing the performance of inspection to ensure providing technical support and services for Stationary Equipment to assure compliance with approved specifications and develop recommendations accordingly. Moreover, to develop young Saudi inspectors through specialized JQP program. 3. Shutdowns

Emdad Engineering-UAE Work as QA/QC Manager

Umm-Nar Refinery Refinery-UAE – Feb10- 05 March 2017 a) Jubail united Petrochemical Company –SABIC Shutdown as Staff Engineer (Sr. Inspection Engineer)

EG 1& 2 - April 10- May 10, 2016

LAO unit - March 10- 25,2015

b) Qatar gas Operating Company As inspection engineer

LNG Train # 1,2, 3 - April 05- 30, 2010

LNG Terminal 1,2,3 - April 05- 30, 2010

c) Descon Engineering – UAE - Work as QA/QC Manager /Coordinator

Umm-Nar Refinery Refinery-UAE - November 10- 05 December 2008

Rawis Fertile plant – UAE - April 10- 25,2009.

d) Pak-Arab Refinery –Pakistan - Worked as Shutdown coordinator

Refinery shut down – Pakistan - February 05- 05 March 2007

Refinery Shut down –Pakistan - March 15- April 15, 2002 4. Project Engineer

Prepare, schedule, coordinate and monitor the assigned engineering projects

Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications

Interact daily with the clients to interpret their needs and requirements and represent them in the field

Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status

Assign responsibilities and mentor project team

Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.

Review engineering deliverables and initiate appropriate corrective action 5. Inspection Engineer - August 2009 to Nov 2014

Qatar Gas Operating Company - Qatar

Key Responsibilities

Inspection of RAS LAFFAN Assets consisting of Terminal /berths, stationary equipment, including pressure vessels, columns, drums, heat exchangers, boilers, coolers, tanks, valves and piping systems.

To supervise all on -stream and shutdown inspection activities for stationary equipment, pressure relieving devices and corrosion monitoring

Implementing the inspection plan of Static equipment’s

Calculating the criticality of Pressure Safety Valves and preparing the calibration plan of Pressure Safety Valves.

Reviewing the inspection reports with all findings, abnormalities and recommendations. Implements computerized inspection management program through Meridium

Meet the targets set by RBI program and ensure smooth completion of the inspections schedule as per the annual inspection programs

Identifying areas of special concern and deterioration (e.g. Dead legs, injection points, buried Piping, corrosion under insulation) preparation of inspection plan and follow up their resolution to improve Plant integrity.

Plant Integrity and Reliability to optimize inspection frequencies, maintenance Cost and Plant Availability.

Responsible to give Special attention to the loading arms of the Terminal and Cryogenic Service tanks Inspection.

Provides technical support to Fields & Terminal staff.

Responsible of inspection of Common sulfur plant which is critical for Ras Laffan Industrial city

Preparing and implementing inspection procedure for stationery equipment.

To comply with company QHSE policy

6.Manager QA/QC – Nov.2008 to July 2009

Descon Engineering Abu Dhabi UAE

Key Responsibilities

Preparation of Quality Control Plan, Inspection & Test Plan, Welding Procedure, Nondestructive / destructive testing, Construction procedures and maintaining Inspection & Test Plans, Quality Systems, Non-Conformance work variation systems, anomalies and punch-list.

Responsible for managing the performance of inspection to ensure providing technical support and services for Static Equipment’s & Piping works to assure compliance with approved specifications and develop recommendations Accordingly.

Reviewing the inspection reports with all findings, abnormalities and recommendations. 7 Inspection Engineer - Nov. 1999 to Nov. 2008

Pak-Arab Refinery Ltd (PARCO) - Pakistan

Key Responsibilities

Carrying out comprehensive inspection program covering Stationary plant equipment & other associate facilities.

To supervise all on-stream and shutdown inspection activities for stationary equipment, pressure relieving devices, corrosion monitoring and investigation of failures.

Prepared and implemented inspection procedure for stationery equipment

To compile data to implementing and updating the Risk Based Inspection (RBI) methodology to enhance Plants Integrity and Reliability to optimize inspection frequencies, maintenance cost and Plants availability.

Reviewing the NDT reports of equipment’s and piping.

Monitor the testing frequencies of safety relief valves and witness relief pressure setting.

Miscellaneous jobs, like control over the asset, guidance and training of personnel for improving the quality of workmanship, enforcement of safety rules, proper documentation of the jobs, and any other assignment given by the management from time to time.

Comply company QHSE policy.

8. Sr. QA/QC Engineer/Shipbuilding Engineer July 1987 to November 1999 Karachi Shipyard & Engineering Works –Pakistan

Key Responsibilities

Construction of 20,000 tons bulk carrier for china shipping from keel lying to launching.

Construction of floating dock, oil carriers and other marine vessel for Pakistan navy.

For Gwadar port, construction fleet consist of pontoon and boats.

To supervise and control over quality aspect of all running orders in KSEW

To co-ordinate with production shops, sales & marketing department, planning section and design offices regarding improvement of quality of work & client's recommendation.

Inspection of pressure vessels, boilers and other process industries equipment fabricated in KSEW.

To arrange inspection from client representative or third party (American Bureau of Shipping, SGS, Lloyds etc.) to certify them and to obtain their approval/acceptance for quality of material and products.

To conduct the Non-Destructive Testing as per client/product requirement. Personal Information

Sex

Nationality

Male

Pakistan

Date of birth June 16, 1963

Driving license Saudi Arab

Marital Status Married

COVERING LETTER

To,

Guildhall Recruitment Agency,

Subject: Project Engineer (VN 18)

With reference to your job title Project Engineer, CV is attached for the subject post having shipbuilding experience worked eleven years (11 years) in Karachi Shipyard & Engineering works 1987-1999 and fulfilling the requirement of the post.

- bachelor’s Degree in engineering (Mechanical)

- More than 5 years of experience for marine works

- Constructed pontoon, boats, bulk carriers up to 20,000 ton

- Having one-year shipbuilding repairing & Maintenance training from Japan

- And join immediately

Regards,

SAEED AHMAD BASHIR

Cell +974-********

Skype saeedbashir63

E-mail ac5uu7@r.postjobfree.com



Contact this candidate