Resume

Sign in

Engineer Machine

Location:
Santa Rosa, CALABARZON, Philippines
Posted:
June 13, 2018

Contact this candidate

CIRTEK ADVANCE TECHNOLOGY SOLUTIONS INCORPORATED

Product and Test (RF) Lead Engineer

Wireless Antenna (LTE) Assembly and Test

Provide Failure analysis report for ATE such as Voltage Standing Wave Ratio (VSWR), Passive Inter-modulation (PIM) and Quick Scan (QS) using Vector Network Analyzer (VNA).

Identify the technical problems and resolve them.

Provide/ formulate evaluation to derive continuous improvement.

Revised and Improved Process Flow and work instruction.

Analyze measured data to enhance performance through yield and failure monitoring using Statistical Process’ Control (SPC) and provide necessary Corrective and Preventive measures.

Consolidate test report and provide feedback to Manger and development team.

Evaluates new methodologies, software, materials and process or equipment prior mass production. Develop ATE algorithms, software, and hardware to enhance cycle time and data analysis.

Performs New Projects Introduction set-up, qualification and up to mass production stage.

Release Daily and Weekly Accomplishment Report and performs other task that may assigned by the manager.

Computer Skills

C / C++ Application and LabView user

GUI program User

Microsoft Word, Power Point, Excel and Pivot Table and Adobe Photo shop

JMP Application / Mini Tab and Synergy

SAP user

Analytical

DOE (Design of Experiment)

FMEA (Failure Mode and Effect Analysis)

7 QC Tools

DMAIC (Define Measure Analyze Improve and Control)

CPK (Process Capability)

SPC (Statistical Process Control)

Root Cause Analysis

8D methodology

Miscellaneous and Machines

Kaelus PIM Analyzer and Vector Network Analyzer

Expert on Pick and Place Die Bonding Machine

Expert n Tape and Reel Machine

Expert on Solder Mounting machine

Expert on Wire Bonding Machine

Expert on Laser Marking Machine

Expert using Spectrum Analyzer, High Performance Scope like NH3 Profile measuring tool, quick vision, DAGE and Vertex, Oscilloscope, OIS motion tester and Auto Focus Testing machine.

Knowledge on Die Dispensing Machine

Knowledge on Resonance and Frequency Tester

User of CNC Machine

Knowledge on Singulation Process

EHS (Environmental Health and Safety)

Leader in Chemical Management

(Reduced IPA consumption by 60% and Epoxy by 20%).Member of Environmental Health and Safety Group

Successfully designed/developed tester, incorporate manual scanning to tester for an auto scanning.

-Improve UPH of Camera Module testing from 70 ~ 85 pieces per hour.

Successfully developed ATE file consolidation and data gathering.

-Easily tabulate data for fast analysis of failure.

Successfully designed/developed pick and place nozzle cleaning/purging.

-Improve yield by 2%, contamination on die/chip decreased.

Reduced ATE probe/pin consumption by conducting operator training.

-Decreased consumption by 5%

Provide a proto type jig for manual application of epoxy/glue or manual encapsulation.

TDK Philippines Corporation

Test Engineer 3

(Camera Module Actuator/ Voice/Video Coil Motor and Magnetic Heads)

Manage /Supervise Test Engineering Team

Supervise tester qualification using Gage Repeatability and Reproducibility (GRR) and Correlation.

Analyze ATE performance through yield and failure monitoring using Statistical Process Control (SPC) rule and provide necessary Corrective and Preventive measures.

Develop ATE algorithms, software, and hardware to enhance cycle time and data analysis capabilities.

Performs New Projects/Product Introduction set-up and qualification.

Evaluates new methodologies of materials, process and ATE.

Monitors machine uptime, utilization, consumable parts/consumption and control.

Provide either direct or functional supervision or training to other Engineer, Technician and operators.

Trains engineers, technicians and operators on machine qualification through quality data check and analysis as well as hands-on training of newly hired operators and develop training materials and it samples.

Coordinates with and gives feedback to suppliers, vendors, customers and design persons-in charge regarding design or machine failures and proposals

Released Daily and Weekly Accomplishment Report.

Performs other task that may be assigned by the manager.

Fujitsu Computer Corporation of the Philippines

Process and Development Technician

(Wafer Fabrication and Magnetic Head Assembly)

Tabulate data from HPGL Gram load, Dage thru Wire full, Peel and Shear Strength as daily machine qualification.

Initiate analysis and provide CA/PA to improve wire bonding and die attached yield.

Resolve issues relating to line stoppages or lot put on hold. Verify defective products/units and disposition them accordingly.

Communicate for equipment spares and auxiliary materials to responsible team.

Initiate process simplification, equipment modification, tools and improvised fixture to improve productivity, efficiency, quality and cost.

Perform evaluation for new model, technology and new project up to mass production period.

Performs other task that may be assigned by the superior.

Manuel S. Enverga University Foundation

Bachelor of Science in Industrial Engineering

Date Graduated: June 2013

University of Perpetual Help Binan Laguna

Bachelor of Science in Industrial Engineering

1996~1997

Camera Module New Project Benchmarking

Conducted in Xiamen China

Date: May 01-05, 2016

Optical Image Stabilization Technology Transfer Training

Conducted in TDK Yangmei Taiwan

Date: June 01-13, 2015

iHS Technology and Process Qualification Training

Slider Dynamic Testing Pick and Place Machine

Conducted in SAE DonnguanGuandong China

April 26 ~ May 15, 2010

DOE Training by SEIPI

Conducted by: Mr. Peter Awayan

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: April 2017

Fire Fighting Volunteer

Conducted by: Calamba Fire Brigade Team (Walfredo Velasco)

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: May 11 - May 15, 2015

Job Hazard Analysis by SAFETY HOUSE INC.

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: October 10, 2014

HIRADC by SAFETY HOUSE INC.

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: October 03, 2014

Root Cause Analysis by Arnold David

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: August 28 to September 02, 2011

ISO 9001-14001 and OHSAS 18001 Seminar

Place: 119 East Science Ave. SEPZ Laguna Techopark, Binan Laguna. Phils.

Date: November 05~06, 2008



Contact this candidate