Engineer Electrical

Curriculum Vitae

ABDULLAH MOHAMMED

Electrical & Electronic Engineer

Mobile : +966*********

Email : ************@*****.***

Career Objective:

To secure a promising position that offers both a challenge and growth while being resourceful, innovative and flexible. Looking forward to work in an environment which provides an innovative ambience and challenging opportunity, where my skills and work experience are utilized entirely in benefiting the organization and permitting me to expand my professional knowledge.

Academic & Technical Qualification:

B. Tech. in Electronics and Communication Engineering from JNTU (2011-2015)

Post-Graduation Diploma in Industrial Automation from Pertecnica Engineering (2016)

Intermediate Education From Shadan Junior College (2009-2011)

Higher Education from St. Maaz High School, (2009)

Certification and Training:

Successfully completed 6 months of training as “CERTIFIED AUTOMATION ENGINEER” from

Pertecnica Engineering (Hyderabad) and worked on following modules.

PLC: Siemens, GE Fanuc, Delta, Omron, Mitsubishi, Schneider

VFD: ABB (ACS 550), Siemens (Micro-master 440)

SCADA: Siemen Wincc, Wonder-ware (InTouch)

ATTENDED THE WORKSHOP ON KEIL COMPILER HANDS ON TRAINING.

DCS: GE, Honey Well

Profile Snapshot:

Well qualified individual in a wide variety of professional discipline and an expert at organizing challenging situation with 2 years of experience in Installation and commissioning and Site engineering.

I am technically competent individual in Industrial automation, VFD, PLC, DCS, SCADA, HMI, Electrical designing familiar with Ladder Logic. Pre-comm. & supervise the commissioning.

Professional Experience (1)

Company : INITEC Energia

Project : Duba Green Integrated Solar Combine Cycle Power Plant

Client : Saudi Electricity Company

Position held : Electrical & Instrumentation Engineer

Duration : September 2017 to February 2018

Functional Area : Pre- Commissioning / Commissioning

Roles and Responsibilities:

Responsible for Instruments field calibration and bench calibration Loop check, function checking task. Preparing daily documentation of the work progress.

Involved in pre commissioning activities like loop check and troubleshooting of the instruments, Logic Function checking etc.

Reviews the Loop Folders submitted by the subcontractor and ensure that it contains all the relevant documents.

Coordinating with the Operations and Safety department to solve the problems during construction and Loop checking.

Co coordinating with Operation to fix the problem in field instruments and DCS.

Troubleshooting if any problem in field instrument and its loop.

Monitoring daily Instruments installation and testing activities and verifying that it complies with the project specification.

Preparing daily documentation of the work progress.

Shall accompany the client representative to carryout routine inspection and release hold points by signing and obtaining the client representative approval signature on the various Quality and Test record as proof of inspection confirming to specification.

Coordinating with site Engineers and supervisors for arrangement of materials required in the site.

Responsible to see that the assigned job is timely completed as per the project schedule.

Inspection the process tubing and check that the tubing is done as per the hook up diagram and confirms to the project specification.

Carryout the surveillance inspections of wiring termination and checking that all the tags are as per the termination schedule.

Responsible for the complete installation of instruments, instrument tubing etc.

Involved in punch list clearing before handling over to the loop checking team.

Attended daily and weekly progress meetings and carried out coordination with the area superintendents.

Monitor execution of work at the sites and responsibility Involved in various site activities.

Reviewing of vendor documents, ILD's, data sheets, P&ID, connection list (termination schedules) and red lining the changes to be done as built

Undergoing the continuity and insulation resistance test of signal and power cables.

Monitor the underground installations and inspection of the burial depth and spacing requirements to adjacent installations and inspection prior to backfilling.

Carry out effective implementation of work schedule to clear punch list.

Professional Experience (2)

Company : Middle East Task Company LLC (K.S.A)

Project : Centralized Control System for water pumping stations (Najran, K.S.A)

Client : Ministry of Water and Electricity (Saudi Arabia)

Position held : PLC/ SCADA Engineer

Duration : April 2016 to August 2017

Functional Area : Installation / Commissioning/ Programming

Roles and Responsibilities:

Responsible for engineering, programming, installation and recording data in regards to electrical/electromechanical information on the water pump stations

Develop electrical design (Power & Control circuit), Schematics and drawings in AutoCAD

Design and develop software applications i.e., SCADA/HMI based on given requirements and specifications.

Installation of field measuring instruments i.e., Flow meter, Level meter, Pressure Transmitters, Actuators and its connectivity with the controlling device.

Responsible for Control Panel wiring, Cable Termination, Installations of Electrical Components like Circuit Breakers, Fuse, Relays, Contactors, Overloads, Soft Starters, Star/Delta starters

To make necessary corrections in P&ID according to the new installations

Troubleshoot issues with existing installed systems

Develop electrical bill of materials

Provide weekly reports and documentation summarizing work completed. Develops functional requirements, devising project plans.

Working on preparing documents for approval of required instruments at pump station.

Ensure standards are maintained in a highly regulated, process driven environment.

Power up electrical systems and configure hardware per application specifications

Check quality of assemblers and technicians work and respond to inquiries during assembly

Provide timely and detailed status updates to the Project manager

Effectively co-ordinate with the Client, Consultant to achieve the better work results

Professional Experience (3)

Company : Teksea Consortia Pvt. Ltd.

Designation : Electrical / Automation Engineer

Duration : May 2015 to March 2016 [1 Years]

Functional area : General Engineering Services

Roles and Responsibilities:

Visit the proposed site for survey on project requirements and demonstrating it to senior engineer and fellow engineers.

Review & Interpretation of Water Balance Drawing, Equipment Selection & Sizing for DM-plant capacity 3000 meter cube/ hour (BOP- Balance Of Plant)

Worked on 1200 ton/hour coal handling plant job includes design calculation, design review specification

Fully involvement in proper follow-up and coordination in site engineering, Installation & commissioning works.

Installation and programming of Programmable Logic Controllers. (Allan Bradley, Siemens, GE Fanuc)

Analyzing the problems and fault findings in Industrial Control Equipment.

Operate computer assisted design and programming software to perform engineering tasks.

Installation and configuration of Variable Frequency Drives (ABB, Siemens)

Worked on open type SCADA (Wincc)

Hands on experience in motors, sensors, valves, switchgears and various instruments used as input and output for the controllers.

Verify and comment on all the engineering documents submitted and insure that they comply with all technical requirements.

Planning and executing with client, project team member to complete the given project at right schedule.

Perform responsibilities of providing technical support and guidance to junior engineers.

Preparing and obtaining approval for all technical documents.

Ensure that every job completed in field got covered inspected through required standards.

Material quality control inspection, receiving as per standards & specifications.

Computer Skills:

Hands on experience in computer aided software.

Operating Systems : Windows XP, Windows Vista, Windows7 & Windows 8, MAC OS.

Microsoft Office : Word, Excel, Access, Power Point, outlook, Visio etc.

Technical Skills:

PLC,SCADA, Wireless Communication, AutoCAD, MATLAB, Signal System, Logic Design, HMI, DCS,SLD (Single Line Diagram), P&ID,Embedded Programming, Microcontroller

Strengths:

Significant strengths in team building to achieve productivity

Performance quality and cost objectives with project management

Smart and Hard Worker

Able to handle multiple tasks at a given point of time

Excellent Verbal and written communication skills

Strongly believe in teamwork, and hard working

Ability to take up the responsibilities with good planning and communication.

Personal Details:

Father’s Name: Mr. Mohammed Muneer Uddin Iqvath

Gender: Male

Nationality: Indian

Marital Status: Single

Iqama: Transferable

Languages: English, Hindi, Urdu, Arabic

Address: Riyadh, Saudi Arabia.

Declaration:

I hereby declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above mentioned particulars.

DATE:

PLACE: (ABDULLAH)

Contact this candidate