Project Quality
Resume:
PATRICK PETER YUSUF, AWS/CWI
Address: No. **D Ugwolawo Rd. Tel: (+234)806-***-*-***
Ajaka, Igalamela/Odolu
Kogi State. E-mail:**************@*****.***
CAREER SUMMARY
I am an enthusiastic quality assurance/quality control engineer with cumulative experience of over 7years in the Oil & Gas/Construction industry in the areas of mats production, general concrete production, inspection and supervision of various MPI, UTI, RFI and LPI on all the standard yard frames, metal slings, hooks, shackle’s, forklift forks etc use for production in submar west Africa ltd, i have supervised various welding fabrication of steel works and formworks in submar west Africa ltd, V. good in receiving & inspection of material and experience in site layout for stacking of materials, V. Good in preparation of job final as-built dossiers, V. good in report writing and review. I have also worked with client (Qualitex consultant) to subscribe submar west Africa ltd for ISO 9001:2015 & ISO 14001:2015, I am also a trained and certified FIRST AIDER. I am keen to apply my skills and expertise I have acquired with a dynamic and innovative organization, thereby making a positive contribution. PERSONAL DATA:
Sex: Male
Date of Birth 29th July 1983
State of origin: Kogi
Local government area: Igalamela/ Odolu
Nationality: Nigerian
Marital Status: Married
Religion: Christianity
INSTITUTION ATTENDED WITH DATES:
Federal polytechnic Idah, Kogi State - 2003 – 2008
Government technical college, Ajaokuta (Kogi State) - 1997 – 2002
ASCL Staff primary School, Ajaokuta (Kogi State) - 1992 – 1997 QUALIFICATION OBTAINED WITH DATES:
Certificate of national youth service (NYSC) - 2010
Higher National diploma, building technology (Upper credit) - 2008
National diploma, building Technology (Upper credit) - 2005
National examination council (NECO) - 2002
West African examination council (Private WAEC ) - 2006
First school leaving certificate (FSLC) - 1997
PROFESSIONAL CERTIFICATIONS OBTAINED WITH DATES
FIRST AIDER In Work Places - 2018
EMS ISO 14001:2015 Internal Auditing - 2016
QMS ISO 9001:2015 Internal Auditing - 2016
Quality Management Documentation - 2016
ASNT NDT Level II (PT, MT, UT & RFI) - 2016
AWS/CWI (15114461) - 2015
Understanding Cost of Quality and TQM Tools 676-***-****) - 2014
Fundamentals of Health and Safety in the Workplace 702-***-****)- 2014
Diploma in Project Management 276-***-****) - 2014
Diploma in Quality Management 685-***-****) - 2014
QMS Lead Auditor - 2012
WORKING EXPERIENCE:
SUBMAR West Africa ltd. Km 14 Warri - Sapele Rd, Effurun Warri, Emval Group POSITION HELD: QMS 9001:2015 ISO Coordinator 2017- Till Date RESPONSIBILITY: My responsibility includes but not limited to the following,
• To ensure that the quality management system of Submar West Africa Limited conforms to the requirements of ISO 9001:2015 Standard;
• To ensure that the processes within the scope of the company’s quality management system are delivering their intended outputs;
• To ensure that reports on the performance of the quality management system and on opportunities for improvement are presented to the top management for review as a basis for improvement of the quality management system;
• To ensure the promotion of customer focus throughout Submar West Africa Limited;
• To ensure that the integrity of the quality management system is maintained when changes to the quality management system are planned and implemented;
• To Liaise with external parties on matters relating to the quality management system including the Consultants handling the project;
• To coordinate QMS audit functions such as audit planning, execution, reporting and follow up;
• Coordinate QMS training, implementation and process improvements activities. POSITION HELD: ESM 14001:2015 ISO Coordinator 2017- Till Date RESPONSIBILITY: My responsibility includes but not limited to the following,
• To ensure that the environmental management system of Submar West Africa Limited conforms to the requirements of ISO 14001:2015 Standard;
• To ensure that reports on the performance of the environmental management system, including environmental performance are presented to the top management for review as a basis for improvement of the environmental management system;
• To ensure that the integrity of the environmental management system is maintained when changes to the environmental management system are planned and implemented;
• To Liaise with external parties on matters relating to the environmental management system including the Consultants handling the project;
• To coordinate EMS audit functions such as audit planning, execution, reporting and follow up
• Coordinate EMS training, implementation and process improvement activities. POSITION HELD: Welding Inspector 2015- Till Date
RESPONSIBILITY: My responsibility includes but not limited to the following,
• Supervision of all welding job in the Submar premises.
• Dimension control.
• Fit up checks
• Pre Qualification Inspection
• Monitor all NDT (UT, PT, MT, LPT, etc) on all Submar deployment frames, wire slings, hooks and shackles, etc for lifting operation.
• Visual inspection of welds carried out on the aforementioned frames.
• Supervision of all calibrations carried out on Submar premises. POSITION HELD: Document Control Officer 2013- Till Date RESPONSIBILITY: My responsibility includes but not limited to the following,
• Develop, review and maintain document control processes for the efficient management and recording of quality documentation.
• Maintain proper organization and storage of documents and information.
• Provide full admin support to the team.
• Coordination and implementation of all activities relatives to the collation and issuance of a “Final As-Built” documentation dossier to clients after production.
• Review of Inspection reports and related Non conformance reports. POSITION HELD: QA/QC Engineer 2011- Till Date
RESPONSIBILITY: My responsibility includes but not limited to the following,
• Prepare, monitor and administer the QA/QC Plan, manufacturing procedures, ITP, work method statements, material traceability procedures, load-out plan, etc and ensuring incorporated materials on construction projects are in compliance with the plans and specifications.
• Assure that the work is performed as required by the contract and meets or exceeds the required qualities.
• Assured the acceptable quality of materials, processes, and workmanship in the project work.
• Follow up the concrete work and inform/invites the client representative on site to witness all, concrete placement, slump test and cubes preparation for the compressive test and also prepare a crushing schedule for the project and sign off all compressive test results.
• Maintain standards of safety and comply with Company’s Health, Safety and Environment Management System requirements.
• Internal auditing, Assessment/ Consultant, Visual Report Writing, Safety Compliance, Process and Standards Improvement, Inspection and Delivery Monitoring, Site Visit and Supervision, Materials Procurement, etc.
• Coordinate the document controls of technical submittals, drawings, etc with the Project Team and to ensure that the QA/QC validation has been done, to ensure their issue, amendments and recall of controlled documents.
• Coordinate all inspection, monitor the required tests and record inspections and tests made par the Contract Plan and Contract Specifications.
• Liaise with the Client's representatives for the conduct of day-to-day quality related project activities.
• Coordinate with the Project Manager regarding work performance and hold authority to stop work in any area where discrepancies remain uncorrected and cancel the stop work order upon satisfactory correction of noted deficiencies.
• Ensure that Non-Conformance Report (NCR) is raised once the activities deviated from the Contract Specifications.
• Coordinate with the project staff to compile and maintain pertinent records of inspection and testing until end of the contract and all pertinent records for retention on completion of the project.
• Attend Monthly Project Review Meetings (PRM) and alert the project team of any potential problems.
POSITION HELD: Production Engineer -2014- 2015
RESPONSIBILITY: My responsibility includes but not limited to the following,
• Planning and preparation of work schedules
• Visit project sites and give evaluation reports.
• Supervise production of concrete mats, grout bags and fabrication of steel formworks.
• Co-ordinate all contract staffs and general load stacking and load out activities.
• Coordination of Visual Inspection, reporting of production activities, planning of work force, equipment, tools demanded and ensuring appropriate calibration of all quality equipments.
• Work with logistics to integrate quality standards as part of the service level agreement for core suppliers and where appropriate, asses supplier return products with failure analysis.
POSITION HELD: Permit to Work Coordinator -2014- 2015 RESPONSIBILITY: My responsibility includes but not limited to the following,
• Report to the Yard manager,
• Ensures strict implementation of PW rules at work locations,
• Coordinates and participates in work permit coordination meetings,
• Audits the permit to work procedure and ensure compliance on daily basis,
• Providing a quality check on the completion of permits and certificates and ensuring all the necessary signatures have been obtained and informing the IA, PA and AA of any potential conflicts,
• Operating the permit office to reflect the current status of all permitted work and isolations. This includes maintaining the permit coordination display board,
• Taking a lead role in ensuring the SIMOPs is not compromised by the issue of conflicting permits,
• Coaching and mentoring of staff when necessary,
• Ensuring that PTW updates/changes are effectively communicated to all relevant personnel,
• Takes part and contributes meaningfully during PTW review meetings,
• Ensure a PTW racking system is in place. Keeps track of valid work permits and ensures closure of work permits on completion of work. Ensures expired work permits are closed, cancelled or renewed as the case maybe.
• Forward all audit reports to Yard manager and records to be maintained. POSITION HELD: Concrete laboratory attendant and Supervisor -2011- 2013 RESPONSIBILITY: My responsibility includes but not limited to the following,
• Provide concrete mix designs and recommendations for clients.
• Train and supervise concrete laboratory workers in the application and the use of admixtures in concrete production.
• Keep regular contact with familiar clients.
• Personally responsible for the follow-up of activities and projects that has been awarded to ensure customer satisfaction.
• Keep appropriate records and necessary reports, -including the updating of concrete trial mix database.
• Also responsible for the whereabouts of all laboratory equipments belonging to submar’s concrete lab.
POSITION HELD: Bobcat Operator and Supervisor -2011- 2013 RESPONSIBILITY: My responsibility includes but not limited to the following,
• Use the machine in loading of the aggregate hopper.
• Use the machine to pile up sand and aggregate in their respective areas.
• Make note of and report on any such complaints and respond in a courteous and respectful manner.
• Operate the bobcat in a safe and efficient way according to all relevant legislation, policies and procedures.
• Perform daily safety and maintenance checks.
• Clean the equipment as scheduled and required.
• Ensure it is safely and securely stored.
• Participate in routine maintenance and pre-mob.
• Perform daily safety and maintenance checks.
POSITION HELD: Batching plant Operator and Supervisor -2011- 2012 RESPONSIBILITY: My responsibility includes but not limited to the following,
• Oversee all plant operations; coordinate and monitor daily work load throughout the plant; monitor plant cleanliness.
• Oversee all maintenance and mobilizing of the mobile concrete batch plant.
• Ensure that all products meet 98% total quality requirements; take samples and as necessary; ensure all equipment is working properly; complete all required reports timely and accurately; inform proper personnel of any quality problems that need resolving.
• Ensure all vehicles and equipment continually remains in safe and efficient operating condition; monitor all preventative and regular maintenance on vehicles and equipment. Maintain adequate levels of all suppliers and products.
• Maintain accurate and current reports as required.
• Ensure that all company safety regulations and policies are followed at all times.
• Ensure that equipments are calibrated and record kept.
• Ensure that all company environmental regulations and policies are followed. PROJECT PARTICIPATED AND COMPLETED:
• Production of High Density Concrete Mattress for FENOG NIG LTD. (EESP-ESCRAVOS EXPORTING SYSTEM PROJECT - 2017)
• Production of High Density Concrete Mattress for DELTATEK OFFSHORE ENGR. (EESP- ESCRAVOS EXPORTING SYSTEM PROJECT - 2017)
• Production of Cement Sand/Grout bags for MUDA SCHOOL NIG LTD. (EESP-ESCRAVOS EXPORTING SYSTEM PROJECT - 2017)
• Production of Cement Sand/Grout bags for DELATTRE BEZONS NIG. LTD. (ESSO #1133- ESSO-EXPLORATION & PRODUCTION NIG. (OFFSHORE EAST) LTD - 2016)
• Production of flexible articulated concrete mattress for DEMABOD NIGERIA LTD. (IDAMA SHORELINE PROTECTION WORKS -2016)
• Fabrication of steel molds and Production of Cement Sand/Grout bags for DELATTRE BEZONS NIG. LTD. (ESSO #1133-ESSO-EXPLORATION & PRODUCTION NIG. (OFFSHORE EAST) LTD - 2016)
• Production of flexible articulated concrete mattress for TOTAL, (DEEP WATER DISTRICT ENGINEERING, and CONSTRUCTION PROJECT- 2015).
• Production of flexible articulated concrete mattress for GLADTRICO Nig ltd. (FORCADOS- YOKRI INTEGRATED PROJECT- FLARES DOWN OFFSHORE WORKS -2015)
• Production of Additional flexible articulated concrete mattress for GLOBESTAR (OFON II PROJECT- 2014).
• Production of flexible articulated concrete mattress for WAV, (AFREN OKORO OKWOK PROJECT- 2014).
• Production of flexible articulated concrete mattress for Delta Afrik Engr. (USARI-IDOHO PIPELINE PROJECT- 2013)
• Production of flexible articulated concrete mattress for GLOBESTAR (OFON II PROJECT- 2013).
• Production of flexible articulated concrete mattress for OIS Group of Engr. ( -2013)
• Production of flexible articulated concrete mattress for AML Group of Engr. ( - 2013)
• Production of flexible articulated concrete mattress for Craig Groups of Engr. ( - 2013)
• Production of flexible articulated concrete mattress for OPI International Nig ltd.
(FORCADOS- YOKRI INTEGRATED PROJECT- FLARES DOWN OFFSHORE WORKS -2012)
• Production of flexible articulated concrete mattress for Niger Dock (STABILIZATION OF SNAKE HIGHLAND PROJECT - 2012).
• Production of flexible articulated concrete mattress for Globestar/Subsea7. (SATELLIT FIELD DEVELOPMENT PROJECT PHASE I – (MPN) -2011)
• Production of flexible articulated concrete mattress for kAZTECH/Addax. (- 2011)
Comprehensive sec. school, Umuekwune, Imo State (NYSC) -2009 POSITION HELD: Class Room Teacher
RESPONSIBILITIES: Teaches, Mathematics, Introductory Technology, Physics, etc.
Ministry of works and housing Igalamela/Odolu (INDUSTRIAL TRAINING)
- 2004
POSITION HELD: Building Construction/ Land Surveying Supervisor OTHER EXPERIENCES -Development of market structure Demarcation of land (using cadastral survey)
Design of site plan and C of O’s
Building supervision
RESPONSIBILITIES: Use of Auto-card for all design works, issuance of C of O’s, Building of bacons, supervision of building projects, etc.
PROJECT PARTICIPATED AND COMPLETED:
• Structural analysis and design of an office complex for school of environmental studies, federal polytechnic Idah, KogiState (2007).
• Design and supervision of a three bedroom flat at Ajaka in Kogi state (2005)
• Design and supervision of a five bedroom flat at Obagwu in Kogi State (2005). POST OF RESPONSIBILITY HELD:
- ISEC Chairman, National Association of Building Students Federal Polytechnic Idah, Kogistate
AFFILIATION / MEMBERSHIP
- American Welding Society 709934
- Member, National Association of Building students F.P.I. Kogi State.
- Member, National Association of Catholic students F.P.I. Kogi State. PERSONAL PROFILE:
• Ability to work under pressure with little or no supervision
• Ability to learn and adapt fast to challenging situation and task
• Effective initiative quality
• High optimistic and target oriented.
• Excellent interpersonal skill
• Highly focused, inspiring, good learning speed and motivated.
• Positive strong team playing potentials and networking ability.
• Very high strength of character, integrity, enthusiasm and transparent honesty. KEY SKILLS
• Good practical and theoretical knowledge of QHSES standards: ISO 9001, ISO 14001.
• Good knowledge of Quality management systems.
• Good knowledge of the English language both written and spoken.
• Capable to motivate and manage people.
• Good social and communication skills.
• Service oriented attitude.
• Meeting Targets
• Excellent team builder
• Excellent handling of tools.
• Capability of achieving consistency and high level of accuracy.
• Excellent management of challenging situations.
• Proficiency in Microsoft and office suits, primavera, AutoCAD, power point, and general computer knowledge.
• Willing to relocate
HOBBIES: Reading, public speech, working on computers, travelling REFEREES: Mr. LARENCE OSUBOR,
Admin Manager
Submar West Africa ltd
Delta State,
(+234) 081********
(+234) 080********
OLUGBENGA OGUNYEMI,
MD/CEO,
Rhapsody Integrated Resources Nig. Ltd,
Lagos State,
(+234) 080********
(+234) 080********
Contact this candidate