Plant Engineer
Resume:
PERSONAL INFORMATION
YOGANATHAN SITHAMBARAM
NRIC No. : 780***-**-****
Date Of Birth : 14th August 1978
Married Status : Engaged
Address : No.142, Lorong Tujuh,
Kampung Pandan, 55100
Kuala Lumpur. Malaysia
Contact No. : +601*-***-****
E-mail : **************@*****.***
Health : Excellent
Current
Remuneration :
MYR 5200.00
Expected Salary : MYR 6500.00
My objective is to leverage my experience while continuing to be challenged with an organization that will utilize my management, supervision & administrative skills to benefit mutual growth and success. I have 20 years of experience working in (concrete plant production, raw material testing & quality control), (metal fabrication & welding works), (cold asphalt premix production, technical development in design, grading & bitumen emulsion) that represent a unique combination of disciplines both technically focused and customer orientated. I have the drive and determination to consistently achieve success as a leader in all of the organizations that I have worked with in the pass. EMPLOYMENT DETAILS
TERRA PAVE MANUFACTURING (M) SDN.BHD.
( Formerly known as Carboncor Manufacturing (M)
Sdn.Bhd )
Dec 2015 to current
Designated as Plant Manager with responsibility for developing plant processes that will maximize stewardship, safety, quality and productivity. Representing as a Senior Level in the management of plant operation. Duties carried out are:-
Managing the maintenance & safety of all plant buildings, equipment and staff.
Making decisions about equipment use, maintenance, modification and procurement.
Ensuring that all Safety Standards are implemented.
Estimating future personnel needs.
Reporting day to day activity at the plant to the senior management level.
Analyzing inventory levels to ensure on-time shipments.
Organizing the delivery of raw materials.
Monitoring the quality and standards of products produced by the plant.
Promoting teamwork and productivity between the plants employees. Page 2 of 7
Taking corrective and preventative actions once a safety breach has been identified.
Ensuring that safety and environmental regulations are being met at all times.
Interacting with outside third parties and contractors in support of plant objectives.
Implementing safety programs to minimize personal injury and property loss.
Developing & creating new mix design for new products
Assigning duties to individual employees.
Carrying out in house audits.
Providing leadership, coordination and coaching to the plant and operational team
Delivering a high standard of supervision in a very busy working environment.
Formulating and driving the operational strategy within a business.
Able to quickly identify root cause issues.
Having a sense of urgency across off areas of responsibility. BINTULU READYMIX CONCRETE SDN. BHD.
(KIEN LIM REALITY SDN.BHD GROUP OF COMPANIES)
MAR 2015 to DEC 2015
Designated as Plant Supervisor for 2 plants. Duties carried out are:
Supervised various production shift schedules.
Hand-picked and trained personnel/staffs to handle supervisory and administrative duties.
Handled staffs/ personnel evaluation and reviewed of performances.
Supervised and maintained quality control plant procedures.
Participating at a senior level in the management of plant operations.
Making decisions about equipment use, maintenance, modification and procurement.
Benchmarking best practices and driving the use of such methods across responsible operations.
Carrying out regular health and safety inspections.
Monitoring the quality and standards of products produced by the plant.
Providing coordination and coaching to the plant and operational team.
Delivering a high standard of supervision in a very busy working environment.
During course of service was promoted as Assistant Manager. WSSF STEEL FABRICATION SDN. BHD 2009 to 2012
Designated as a Welder (TIG, MIG & SMAW). Duties carried out in job are:
Welding and fabrication job on all materials.
To assist the workshop supervisor and engineer on any other job such as measurement, diameter of material, cutting, bending and fabrications.
LAFARGE CONCRETE (MALAYSIA) SDN BHD 2005 to 2009
Last designated was as Plant QA/QC. Duties carried out in job are:
To ensure all quality system management is with the requirements of MS ISO Standard.
To schedule field technician and pick-up drivers daily for job site. Page 3 of 7
To inspect visually all concrete supply living the plant as per required.
To collect raw material sample daily such as: Cement, Fine Sand, Aggregates & Admixture
To check all field tech. Reports, raw material test result & customer test cube result and up date for monthly audit.
To ensure daily control cube is batch for plant performance strength analysis.
To attend for any site quality problems immediately.
To communicate all time with customer, RE & Consultant for any amendments on quality or supply.
To attend on any site failure on structure to witness and suggest other future test can be done base on the failure.
To conduct trial mix for new customer.
To assist the concrete engineer & plant manager in other related duties as instructed. WANDALYN STAINLESS STEEL FABRACATION SDN BHD DEC 2003 to DEC 2004 Designated as a Welder (MIG, TIG & Stick). Duties carried out in job are:
To do welding work on stainless steel material and other fabrications such as. a. House fencing, gate and interior fabrication design. b. Kitchen equipment such as grill stand, tables and other item. c. Car body kit such as kangaroo bar and other item.
To assist the workshop supervisor and engineer on any other job such as measurement, diameter of material, cutting, bending and fabrications.
CMC DIRAVANA (MALAYSIA) SDN BHD
(PENCHALA LINK, TUNNEL PROJECT)
DEC 2002 to SEP 2003
Designated as a QA/QC Inspector. Duties carried out in the job are:
Ensuring that the Contract Works abides within the Project Specification and in accordance with the Manufacturer Standards.
Ensure that the Quality Assurance of works implemented had the approved checklist and Inspection Report (IR) following the Quality System Management. Also, as per Approved Inspection and Test Plan, ensure that the Material Laboratory Test and assessment was implemented.
To witness on workability test, temperature & cube sampling for all concrete loads at site.
Site Inspection of shotcrete job after blasting & sampling of panel box for core test & witnessing rock bolting on tunnel surface.
To witness & inspect all concreting jobs on handling, placing and compacting at site correctly.
To witness all laboratory tests on admixtures, raw materials, and cube & core samples. a. Admixtures ph limits & density test.
b. Sieve analysis for fine & coarse aggregate.
c. Organic impurities, clay & silt contain test.
d. Compressive strength test for cube & core samples.
Implement Mock-up works and check the quality of work (WIR) as well progress reports, Implement Non-Conformance Report
(NCR) AND Site Observation Reports to site.
To identify the effects of restrain, hairline cracks, plastic settlement cracks by using Spoon test.
To witness on any other structure failure test.
To monitor all cube result, preparing standard division & strength development graph.
To assist the Resident Eng. & Material Eng. On any other site inspection or test witness. (Closure of NCR and SON by actual remedial works and photos)
To witness on any other structure failure test.
Page 4 of 7
BJ SERVICES (TUAS AVENUE SINGAPORE) SEP 2001 to SEP 2002 Designated as a Blanding Plant Operator. Duties carried out in the job are:
Operating the Blanding plant mixer to bland admixtures such as accelerators, water-reducers (plasticizers) for cementing jobs for oil and gas industries.
To make sure every bland of admixtures is as per design by the chemical engineer.
To collect sample for laboratory as per request by lab technicians.
To label every batch of chemical after the bland is completed. BUILDCON CONCRETE SDN BHD
(A Group of YTL CEMENT)
FEB 1997 to AUG 2001
Last designated was as an Assistant QC Supervisor. Started as a Concrete Technician and worked all the way as Batcher, QC Technician and the final Asst. QC Supervisor. Duties carried out in the course of the job are:
To schedule QC Technician daily for job site and plant, ensuring that adequate technicians are available.
To monitor the number of cube mould and cube sample.
To direct pick-up drivers to site and plants as required for the collection and delivery of cube sample/moulds for job site.
To check all field samplings and plant documentation and submit copies to laboratory.
To ensure all raw materials sample are provided to the laboratory as required by procedures.
To ensure that that cube sample for plant performance monitoring are taken and followed up.
To attend to site problems immediately.
To communicate with site personal, customers and representative as required.
To carry out slump checks and take corrective action as required.
To prepare and monitor all overtime claims of QC Technicians.
To assist the Concrete Engineer in any other duties as instructed.
Have also worked/ assigned in few major project of the company such as. a. Berjaya Star City Project, Jalan Imbi.
b. KLIA Airport.
c. KWSP Building, Jalan Tun Razak.
d. Putrajaya Projects.
e. LBS Projects, Serdang.
Page 5 of 7
EDUCATION & QULIFICATION
Federal Training Institute Victoria,
Melbourne, Australia Twinning
program with TATI University
Collage Kemaman
Terengganu.
Year 2013 to 2014
Certificate II in Engineering
MEM20105
Course details
Apply principle of occupational
health & safety in the working
environment
Plan to undertake a routine task
and complete activity
Apply quality system and quality
procedure
Work with others in a
manufacturing engineering or
related environment
Perform sheet & plate assembly
Perform routine oxy acetylene
welding
Perform manual heating &
thermal cutting
Perform routine manual metal arc
welding
Use workshop machine for basic
operation
Interpret technical drawing
Undertake manual handling
Perform engineering
measurement, computation
Use hand tools
Use power tools / hand health
operation
TWI (The Welding Institute of
United Kingdom)
CIDB (Construction Industry
Development Board), Malaysia
Year 2012
Completed 3G Welding course in
SMAW (Shielded Metal Arc
Welding)
HEALTH AND SAFETY COURSE
(GREENCARD)
Sekolah Menengah Dato Lokman,
Kuala Lumpur
Year 1995
SPM
Page 6 of 7
EXPERTISE & OTHER KNOWLEDGE
Batching Plant system Eagle Revision, Alcon, MHW.
Microsoft Office & Windows
Internet, Email & Multimedia
Welding 3G, Hand tools, Lathe machine, Milling machine
Interpreted Technical Drawings
Engineering computation
Safety and Quality measurement
Measuring & measurement tools
Concrete Material Testing
Asphalt Testing
LANGUAGE
Spoken : English, Bahasa Malaysia & Tamil
Written : English & Bahasa Malaysia
PERSONAL ATTRIBUTES
Hardworking
Willing to work under pressure
Independent
Friendly and co-operative
Dynamic team player
Fast learner
Energetic
Self-motivated
Honest and trustworthy
Conscientious
Page 7 of 7
REFEREES :
Name : Mr. Mohanthas Narayanasamy
Position : Business Development Head
Organization : Terra Pave Manufacturing (M) Sdn.Bhd Contact No. : 012 – 305 3740
Name : Mr. Dirk Quinten
Position : Group CEO
Organization : Gryphon Energy & Terra Pave Technologies Contact No. : 019 - 352 7530
Name : Mr. Mark McDonald
Position : Vice President
Organization : Carboncor Manufacturing (M) Sdn. Bhd. Contact No. : 017 – 288 5730
Name : Mr. Mr. Hanson Ling
Position : Managing Director
Organization : Bintulu Readymix Concrete Sdn. Bhd
Contact No. : 019 – 814 0150
Contact this candidate