Electrical Engineering
Resume:
Curriculum Vitae Calvin Hartmann.
PERSONAL INFORMATION
First Name Calvin
Surname Hartmann
Identity Number 620**********
Date of Birth 05 March 1962
Marital Status Married
Contact Number 082-****-***
Nationality South African
Home Language (1st) English (2nd)Afrikaans.
Language Fluency Read- Good Lees- Goed
Write-Good Skryf-Goed Talk- Good Praat- Goed
Criminal Offences None
Driver’s License Code 08 EB
Religion Baptist
EDUCATIONAL QUALIFICATIONS
High School George Campbell Technical High, Durban.
January 1976-March 1980
Standard Nine
Subjects English (1st Lang,) Afrikaans (2nd Lang), Science, Technical Drawing, Electronics work
Tertiary Education
College Russel Road Technical Collage (Port Elizabeth)
Courses NTC3,
Subjects Electrical Trade Theory. Maths, Engineering Science, Electronics.
NTC4
Subjects Electronics, Industrial Electronics, Digital Electronics.
NTC5.
Subjects Electrotechnics, Industrial Electronics, Maths.
Wireman's Licence (Installation Rules) 10-April-1990
Higher Tertiary Education
Course National Diploma Electrical Engineering.
Institution Vaal University of Technology)
Subjects Communication, Communication Programming, Electronics 1,2&3, Digital Systems 1,2&3. Electrical Engineering 1&2, Mathamatics1&2, Physics1, Projects 1, Electronic Applications 3, Design Projects 3, Electronic Communications 2, Electronic Measurements 3 & Metrology, Management 2, Industrial Electronics 2, Power Electronics 3.
EMPLOYMENT HISTORY
Self Employed March (March 2014 – till present)
I have sub contracted at several companies, as listed below
Smith’s Manufacturing Pine town Contact person Ken Jennings 082*******
Conducting COC; s on all the machinery in the plant to certify for correct wiring.
Harcourt’s Body corporate Richards Bay
Contact person Kim Ahton Cell 081*******
Maintenance and new installations on their managed complexes.
Scribante Africa Mining Richards Bay
Contact person Mario Bucarrio 083*******
Maintenance and new installations on their office buildings, workshops and COCs when necessary.
St Francis Catholic Church Richards Bay
Contact person Mario Bucarrio 083*******
Maintenance and new installations on their church buildings and house.
54 Dollar drive Industrial building Richards Bay
Contact person Robert (builder) 061*******
Building was totally destroyed by fire, I rewired and issued COC for building from the ground up.
Attorney Monica Van Niekerk Richards Bay
Contact person Mrs Van Niekerk 035-*******
Contact person Heliana 063*******
Conduct COC’s on all houses as required by sale agreement.
ACDC express Richards Bay
Contact person Charles White 071******* 087*******
Carry out work as per quote from clients.
Work Force employment agency Richards Bay
Contact person Ilse 035*******
Carry out COC, s and repairs on all 3800-volt distribution boards at Tata Steel for recommissioning of factory.
MDC real estate Richards Bay
Contact person Manie De Klerk 082*******
Contact person Launa 079*******
General repairs to rented out houses and complexes.
Company Mondi Paper (Richards Bay)
(01-December -2007)
Section Automation Department.
Duties.
To carry out the tasks of fault finding and repairs, and replacement of faulty equipment where necessary, through the plant.
Siemens S7 PLC diagnostic for fault finding purposes and carry out repairs.ABB AC and DC drive fault finding and maintenance as well as repairs. Electrostatic precipitator repairs.(Geecom, Epic and FLSmidth). ABB Rectifier fault finding and repairs. ABB insum board fault finding and repairs. Siemens drives fault finding and repairs. Siemens Simocode motor starters commissioning as well as fault finding and repairs. Eaton soft starter commissioning. Eaton UPS system checks. The repairs were carried out by OEM.
ABB PLC (AC80 & 800M fault finding and repairs.
Reason for leaving. Resigned 19-March-2014
Started my own Business.
Company Sasol Synfuels( Secunda)
(01-August-1988)
Section Gas Production.
Duties.
Electrician
General electrical duties as required by the gasification plant.
Worked on 525 switch gear.
Worked on 525 motor starters from 5Kw to 110 Kw.
Limited work on 11 KV & 6.6Kv switch gear.
Fault finding on conveyer systems.
Fault finding on relay logic systems.
PLC programming and instillations. (Texas Instruments)
Section Electrical Test Department.
Duties.
Senior Electrician/Specialist Electrician
Maintenance and fault finding on CNC (computer numeric control) drilling machines, Lathes, Horizontal Boring Machines, Vertical Boring Machines, Milling machines, Grinding machines. instillation and calibration of Heidenhain measuring equipment. repairs to Siemens Simoreg drives, and controls. focused on the industrial welding machine repairs.
I was sent to Switzerland to ARC Machines. my task was to Program, Calibrated, Test 2 fully automated machines that Sasol had purchased, to the value of R2.1 Million.
Promoted to Electronic/Electrical Technician.
Section Electronic Workshop.
Duties.
Electronic/Electrical Technician.
Repairs down to component level were carried out to all the plant electronic modules and cards, Mamp sources, Fluke meters, Gas Detectors and the calibration there off as well as analogue and digital measuring modules, used for defend applications, e.g. sound, voltage light, Mamp, vibration, ETC.
Section Electrical Test Department.
Duties.
Electronic/Electrical Technician.
Received official training, Level1&2 at an accredited training centre for Thermography in order to carryout Infra Red scanning.
My daily task was to scan the electrical buckets in the sub stations in the plant for any normalities and then compile a report and send it to the relevant owner, so he could arrange for running repairs.
Reason for leaving. 30-November-2007
Better Job Offer.
Company South African Railways & Harbours.
(02-January-1981)
Course Electricians Apprenticeship
Qualified as an Electrician on the 17-September-1985.
Deployed, in the area from Noupoort, Craddock, Grahamstown and Port Elizabeth.
Port Elizabeth Harbour
Duties.
Rewiring of harbour cranes, rewiring of railway houses, and buildings.
Fault finding on conveyer belt systems, in the ore berth.
General electrical repairs as required in the harbour.
25 Kilo Volt traction line maintenance.
New instillations for signalling systems through the area.
11 Kilovolt transmission line jointing and rerouting.
Carry out repairs to passenger coach charging systems and battery maintenance.
Limited refrigeration plant experience.
Reason for leaving. 30th-July-1988
Over staffed and we were required to take on other duties with lower salary grade. Jobs offered, were shunters, firemen, truck drivers, Cargo checkers, ETC. I acquired my code 14 licence and was a truck driver for a short while till I resigned.
Training Courses attended. (through my Career)
Quality Improvement Process 01-December-1988 Sasol
Classified Equipment 4-December-1989 Sasol
Texas Instruments Programming 17/21-July-1989 Alpret LTA Autecon
T I Hardware/software configuration 30-04/4-May-1990 Alpret LTA Autecon
T I Control vision nit configuration 23/27-July-1990 Alpret LTA Autecon
Heidenhain linear and rotary encoder, 05/07-September-1990 Digital Readout Services
T I Peer link configuration & programming 6/8-August-1990 Alpret LTA Autecon
PAT safe load systems 20-September-1995 PAT South Africa
Mobile Crane pick up and carry 15/19-May-1995 Sasol
Automatic Welding System Supervision 26/30-June 2000 ArcMachines Switzerland
Work Permit Code 13-January-2000 Sasol
Fluke Metcal 16/17-October-2003 Spescom
Thermography level1 16/20-May-2005 H Rohloff, Randburg
Thermography competence 7-July-2005 Infrared Training Center Europe & Asia
Hot work & Cold work Permit Authorisation 13-June-2006 Sasol
Thermography level2 19/23-April-2007 H Rohloff, Randburg
Thermography competence 19/23-April-2007 Infrared Training Center Europe & Asia
SAP Navigation 21-April-2009 Mondi
Siemens Simatic Maintenance Serv1 4/8-Febuary-2008 Siemens Pinetown
Siemens Simatic Maintenance Serv 2 Siemens Pinetown
SemiConductor workshop 22-August-2008 Title page Traders, R/Bay.
Electrostatic Precipitator training 14/15-October-2008 Geecom.
Siemens WinCC Flexible 22/24-June-2010 Siemens
Pinetown
Wonderware Intouch 1Fundamentals 23/27-August-2010 Wonderware.
ACS 800-Multidrive Opper & Maint November- 2010 ABB South Africa
Profibus Trouble shooting & Maint 19-April-2011 Cube Pinetown
Certified Profibus 19-April-2011 Cube Installer.
Effective Human Intervention 28/30-march-2011 Mondi.
Siemens S7 Programming course 1 Siemens Pinetown
Siemens S7 Programming course 2 25/29-March 2013 Siemens Pinetown
Siemens Micromaster 440 10/11-June-2013 Siemens Pinetown
Business Practise
I am at the moment running my own business from home, and managing my expenses as well as income for the business.
I have also managed the Secunda Baptist church funds, including all collections, paying of services and paying the pastor. I volunteered for this position as we lost our financial chap.
I have been in a supervisory position in Sasol for a while, till I was replaced by a BEE candidate.
References
Sbonelo Xulu Mondi Electrical Technician 083*******
Andrew Saville Mondi Senior Electrical Technician/Acting Supervisor 082*******
Kenny Pearson Sasol Supervisor 082*******
C Hartmann
Contact this candidate