Safety Manager

Brandon Ross Lock *** Barkwood Dr. * Brookeland, TX 75931 * 325-***-**** * *************@*****.***

SUMMARY OF STRENGTHS

• Over 15 years of experience in the safety and hazmat fields

• Train, coach and mentor employees and provide all resources necessary to work safely

• Develop and write SOP’s for specific job functions

• Current with all local, state, and federal regulations (OSHA, EPA and TCEQ)

• Observe and practice all governmental safety regulations, project requirements and company safety policies

• Develop and implement rules and procedures to ensure the continuous improvement of Safety Programs

• Inspect and audit local and sister plants to ensure Safety Programs are being implemented and followed

• Highly knowledgeable in Workman’s Comp rules and regulations

• Lead and Conduct Incident Investigations and recommends corrective action for all accidents

• Compile data accurately to be able to analyze and identify trends to develop or correct safety protocols

• Excellent oral and written communication skills, with the ability to work with others to resolve issues

• Result-oriented, highly motivated and ability to meet deadlines

• Operate forklift and crane, along with training the operators

• In-depth knowledge of handling and storing hazardous materials

• Proficient with SDS sheets

• Competent with systems such as Microsoft Word, Excel, PowerPoint and Internet

CERTIFICATIONS AND TRAINING

• TEEX: Introduction to Accident Investigation (OSHA 7505)

• TEEX: Electrical Standards (OSHA 3095)

• Fall Protection Competent Person Training

• Hazardous Waste Operations and Emergency Response (HAZWOPER) Training as per 29 CFR 1910.120

• Function Specific and Safety Training for MDI under DOT regulations (49 CFR 172.700-172.704)

• Foundations for Building Leaders (FBL) Training

• Drug Test Training

• Kone Crane Training Institute: Crane Operator & Rigging Train-The-Trainer

• Powered Industrial Truck Lift (Forklift) Trainer

• Fire Extinguisher Trainer

• Resource Conservation Recovery Act (RCRA) Training

• Lean Sig Sigma – Green Belt - 40 hours

• CPR/First Aid/AED/Blood borne Pathogens Certified

• Industrial/Hazardous Waste Management

• Spill Prevention and Response/Storm water Pollution Prevention

• AMMO-62 Technical Transportation of Hazardous Materials Course

• Hazardous Waste Generator Certification with The National Environmental Trainers

• Porta count and Respirator Certification Training- 15 years

• Commercial driver’s license (CDL)- 20 years

• Hazmat endorsement- 4 years

• Tank vehicle endorsement- 20 years

• Operation of fork lift- 20 years

• Operation of tug- 12 years

EXPERIENCE

2016-Present Louisiana-Pacific (OSB Manufacturer)

Safety Manager

o Provide basic/ general consultations and services to plant leadership regarding Safety, Industrial Health, and Fire Prevention concerns, operations, and compliance issues. o Perform EHS and Fire Assessments Audits in other LP sister plants. Brandon Lock’s Resume- Page 2

o Communicate goals and objectives of Safety Management System. o Coordinate activities of Site Central EH&S Committee. o Implement and write Safety, Industrial Health, and Fire Prevention policies and procedures. o Review and analyze the effectiveness of current programs; recommend improvements to policies and procedures. o Research and create program recommendations for assigned area of safety, industrial health, and fire prevention. o Develop, coordinate, and facilitate education and training on Safety, Industrial Health, and Fire Prevention issues in the plant.

o Monitor Safety record keeping and compliance; conduct periodic inspections. o Manage Fire Prevention Plans and Contractor Safety processes. o Directly manage site 24/7 employee health screening and wellness efforts. o Coordinate and facilitate incident investigation and reporting process. o Coordinate hazard identification, elimination and reduction process. o Coordinate employee industrial health monitoring and testing. o Develop and manage site safety and industrial health budget. o Manage individuals assigned to site Fire Prevention crew. o Perform all duties in accordance with safety rules and regulations. o Weekly safety talks with specific topics to employees. o Weekly conference safety calls with other LP plants. 2012- 2015 Hirschfeld Industries (Steel Fabricator) Safety Director (TX: 2012-2014, NC: 2014-2015)

o Understood, administered and enforced OSHA, EPA, TCEQ (Texas), NC-DEQ (North Carolina) and other federal, state and local standards, as well as company safety policies for the purpose of establishing a safe work environment in 7 Texas and 4 East Coast plant locations. o Worked directly with managers and supervisors to improve the employee safety performance. o Implemented, scheduled and conducted mid-quarter safety meetings which included walking through shops with supervisors and managers to look for potential safety hazards. o Implemented, scheduled and conducted quarterly safety meetings with the CEO, vice presidents, managers, and supervisors to discuss safety trends of the company and each facility. o Developed and wrote safety programs and safety SOPs. o Evaluated and identified safety issues for each facility and recommended solutions. o Conducted classroom training on specific topics such as confined space, forklift, and crane training. o Conducted new hire safety orientations and assisted in completing required HR paperwork. o Sent topics for weekly toolbox meetings that focused on relevant issues regarding onsite jobs or injury/illness. o Served as the point of contact for all scheduled and unscheduled governmental (OSHA) inspections. o Accompanied inspectors and documented their activity, participated in opening and closing conferences, and ensured prompt correction of all noted discrepancies. o Handled all workers compensation claims as well as the transportation of injured employees to a physician’s office or hospital for proper care.

o Reviewed and approved invoices and medical claims. o Understood/learned the operation of equipment, including safety equipment, in order to educate/train the field staff on proper use and operation.

o Conducted safety orientations with outside visitors so they understood our safety policies and wore the appropriate PPE while in our facility.

o Performed air and noise sampling to make sure compliance with all regulations. o Audited supervisors and managers to ensure they were performing all required safety training. o Handled all OSHA 300 Logs for all sites as well as cost per man hour reports. o Trained over 800 employees in safety training topics between the Texas and East Coast Plants. o Handled all storm water and hazardous waste collections and profiles. o Coordinated random drug screens (Texas) and hearing tests. Brandon Lock’s Resume- Page 3

1999-2012 Dyncorp International / Computer Science Corporation (Governmental Aerospace Technology) Safety/Hazmat Inspector, 2007-2012

o Maintained control of all hazardous materials and ensured compliance with all local, state, and federal regulations. o Presented topic specific hazmat classes in Monday morning meetings throughout the year, as well as annually presented a class and recertified all spill response team members. o Performed weekly inspections on spill kits to ensure proper inventory, as well as inspections on fire extinguishers, smoke detectors and eyewash stations, along with maintaining database control on these items. o Stored and inspected all hazmat products for expiration dates, as well as maintained a database for all hazmat products on site.

o Delegated some Hazmat related duties to the Hazmat assistant. o Member of the safety committee, FOD (Foreign Object Debris) Safety Officer, as well as the coordinator of the Spill Response and Blood Borne Pathogen Teams.

o Completed weekly and monthly safety audits for hazmat and performed daily inspections of daily use cabinets. o Inspected, stored, and monitored all ingoing/outgoing hazardous waste. o Certified all shipments of hazmat and hazardous waste and ensured proper packaging. o Maintained up-to-date MSDS sheets and made sure all daily use lockers had proper MSDS sheets as well. o Provided mechanics with technical data on hazmat products and was responsible for ordering all hazmat products for induction, EBII, and facility support.

o Assisted in control fueling of GSE equipment and fueling/defueling of aircraft. Safety/Supply Tech, 2002-2007

o Lead the safety program and ensured compliance with all federal, state and local regulations as well as controlling all hazmat products.

o Ensured all government equipment was properly accounted for as property book manager. o Ordered items for different programs to include induction, EBII, and facility support. o Ordered items to replenish kit shortages for the EBII program as well as having control of all kits and paper work that were designated to different aircraft.

o Helped maintain paperwork on all shipments going out as well as all shipments coming in. o Knowledge of various forms to include 1148, 1348, 2062 and other DD forms. o Assisted in training many supply helpers to facilitate a promotion to Supply Tech. Warehouseman, 1999-2002

o Ordered and maintained control of all bench stock and shop stock items and ordered parts for various aircraft applications such as CH-47, UH-1, UH-60, OH-58, and MWO’s. o Helped maintain tool room and control inventory of Hazmat as well as build arc 220 shipments. o Transported and picked-up engines from Bell Helicopter and assisted with shipments of all aircraft when needed. o Transported and picked-up supplies and parts from Fort Hood in Killeen, TX. 1998-1999 RPS/FedEx Ground

Delivery Driver

o Delivered packages to residents and businesses around the San Angelo area. o Used a scanning computer to keep inventory of all packages delivered. o Other duties included loading and unloading trucks and covering other routes. 1997-1998 Haliburton Energy Services

Frac Crew Member

o Traveled to various sites transporting expensive technical computer based systems. o Operated the computers on board to pump and control certain chemicals running through oil well pipe lines. o Maintained the storage and transportation of many various Hazmat chemicals.

REFERENCES

• Available upon request.

Contact this candidate