Welder
Resume:
** ****** ** *********,, *************, ***** 906-***-**** or 906-***-**** *********@*****.***
Robert Jones
Wordester, Massachusetts, 01606
*********@*****.***
WORK EXPERIENCE
MARINETTE MARINE CORP. / SHIP BUILDERS, Marinette, Ship fitter, Feb 2011 – Feb 2014
Weld components in flat, vertical, or overhead positions.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
Gouge metals, using the air-arc gouging process. HIGH VIEW FAB., Greenbay,
Welder/Fitter, Apr 2009 – Jan 2011
Design and construct templates and fixtures, using hand tools.
Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches.
Preheat workpieces to make them malleable, using hand torches or furnaces.
Mark reference points onto floors or face blocks and transpose them to workpieces, using measuring devices, squares, chalk, and soapstone.
Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
Tack-weld fitted parts together.
Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components. BUYCYRUS INTERNATIONAL, Millwaukee,
Welder, May 2007 – Jan 2011
Operate safety equipment and use safe work habits.
Weld components in flat, vertical, or overhead positions.
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
Fill holes, and increase the size of metal parts.
Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
Signal crane operators to move large workpieces.
Gouge metals, using the air-arc gouging process.
Preheat workpieces prior to welding or bending, using torches or heating furnaces.
Set up and use ladders and scaffolding as necessary to complete work. 11 Inwood Rd Wordester,, Massachusetts, 01606 906-***-**** or 906-***-**** *********@*****.*** WASHBURN AND DOUGHTY /SHIP BUILDERS, Booth Bay Harbor, Structural Welder, Jul 2004 – Dec 2010
Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
Tack-weld fitted parts together.
Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
Smooth workpiece edges and fix taps, tubes, and valves. TAMPA BAY SHIP. / SHIP BUILDERS, Tampa,
Structural Welder, Apr 2003 – Jun 2003
Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members.
Pull, push, or pry structural steel members into approximate positions for bolting into place. PALATINE WELDING, Palatine,
Fitter\Welder, Feb 2000 – May 2003
Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
Tack-weld fitted parts together.
Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
Move parts into position, manually or with hoists or cranes.
Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
Straighten warped or bent parts, using sledges, hand torches, straightening presses.
Lift or move materials and finished products, using large cranes.
Heat-treat parts, using acetylene torches.
MOLDING AUTOMATION CONCEPTS, Caroll Stream,
Welder/Fitters Helper, Feb 1998 – Feb 2000
Operate safety equipment and use safe work habits.
Weld components in flat, vertical, or overhead positions.
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded.
11 Inwood Rd Wordester,, Massachusetts, 01606 906-***-**** or 906-***-**** *********@*****.***
Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
Detect faulty operation of equipment or defective materials and notify supervisors.
Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
INTERNATIONAL STEEL, Orlando,
Welder, Dec 1997 – Feb 2000
Operate safety equipment and use safe work habits.
Weld components in flat, vertical, or overhead positions.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
ADDISON STEEL, Orlando,
Welder, Aug 1997 – Dec 1997
Operate safety equipment and use safe work habits.
Weld components in flat, vertical, or overhead positions.
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded.
Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
Gouge metals, using the air-arc gouging process. FOOT STEEL, Orlando,
Welder, Sep 1995 – Aug 1997
Operate safety equipment and use safe work habits.
Weld components in flat, vertical, or overhead positions.
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
STEEDMAN STEEL, Orlando,
Welder\Machine Operator\Fitters Helper, Oct 1993 – Jan 1997
Inspect or measure finished workpieces to determine conformance to specifications, using measuring instruments such as gauges or micrometers.
Observe machine operations to detect any problems; make necessary adjustments to correct problems.
Measure workpieces and lay out work, using precision measuring devices.
Operate safety equipment and use safe work habits.
Weld components in flat, vertical, or overhead positions. 11 Inwood Rd Wordester,, Massachusetts, 01606 906-***-**** or 906-***-**** *********@*****.***
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
EDUCATION
Gateway High, Kissimmee
High School Diploma, Aug 1990
Basic Studies
Mid Florida Tech, Orlando
Aug 1990-Dec 1992
Smaw-Gtaw-Gmaw-Oawc-Oaw-plazma cutting
SMAW- 6012,6011,6013,7018,7024,and some cast iron repair electrods.GTAW- aluminum,stainless steel,mild carbon steel.GMAW-hard wire spray arc, fluxcore inter shield and outer shield stainless wire hard surf wire, spool gun aluminumn. ADDITIONAL SKILLS
Good math skills.I am a good self starter.I am good with working with others.I can operate shears, iron workers, drill press, break press,and most common shop tools.
Contact this candidate