Curriculum Vitae

Name :

Mohammad Hameed Ali

Present Position:

Senior Drainage/Civil/Micro-tunnel Inspector

Nationality :

Indian

Training :

Education :

MAIL ID :

Mobile No :

HSE Implementation, Internal Auditing & Introduction to ISO Standards

DIPLOMA IN CIVIL ENGINEERING

ac4zqa@r.postjobfree.com

ac4zqa@r.postjobfree.com

66932262,55166135

TOTAL :

EXPERIENCE

14 YEARS. (10 YEARS IN QATAR WORKING WITH ASHGHAL AND KAHRAMAA PROJECTS)

Profile

I have acquired an extensive experience in the Construction Supervision and through active participation in the Construction of various prestigious projects in the QATAR, & INDIA. Proven competency sincerity and hardworking qualities well organized and analytical. Site base design on work.

I have been involved in the Construction of Infra-Structure Projects (Micro-Tunneling, Installation of all types of underground utilities, Concrete water reservoir& roads).water works and other connected utility services. In the position of a Civil Engineer with contracting and consulting firms in INDIA and G.C.C countries, I have worked at various level like site engineer, inspector, and capable of handling Following responsibility.

Selected Experience

COWI A/S Overseas, Qatar (2015 – Present)

Senior Civil Inspector

Client : Public Works Authority Ashghal – Qatar

Contractor : Abdullah Nass Group Company Qatar (GEC)

Project : PS 16N Pumping Station) Cp 654

Project Brief: Construction of New pumping station PS16N Pre-treatment by Macerators housed in a 6m shaft 22.5m deep to invert and Submersible pump pumping station 23m deep to invert and 7m with 3 No.Pump sets (2 duty, 1 standby) - 2 pumps running rated to deliver 770 l/s against42m head, with connected valve chamber. Associated 11kV/415V sub-station, MCC building and 1,360kVA stand-by Generator.

MICRO TUNNELING PIPELINE

979m of 800mm nominal bore

139m of 1,000mm nominal bore

3,835m of 1,200mm nominal bore

2,426m of 1,600mm nominal bore

209m of 2,000mm nominal bore

Inspection Shaft - 20 Nr with invert depth range of 6.5m to 20.5m,

Maintenance Shaft - 35 Nr with invert depth range of 6.0m to 22.0m,

Caisson Chambers for future connections- 3 Nr with invert depth range of 7.5mTo 12.5m

Area Sewerage

1,224m of 200mm with invert depth range of 1.5m to 3.0m

960m of 300mm with invert depth range of 1.5m to 6.0m

1,741 m of 400mm with invert depth range of 2.0m to 7.0m

586m of 500mm with invert depth range of 4.5m to 5.5m

661 m of 600mm with invert depth range of 5.0m to 8.0m.

Shallow manholes - 1 6 Nr with invert depth range of 1.5m to 4.25m.

Deep manholes -13 Nr with invert depth range of 4.5m to 6.0m.

Very Deep manholes -11 Nr with invert depth range of 6.0m to 10.0m

House Connections - Type A -152 Nr, House Connections - Type D - 45 Nr

Rising Mains

2,070m of 900mm HDPE pipe with depth invert range of 1.5m to 6.5m

Wash-out Chambers - 3 Nr with invert depth range of 4.0m to 6.5m

Air Valve Chamber - 3 Nr with invert depth range of 4.5m to 5.0m (2 Nr to be

Constructed to existing rising main)

Duties and Responsibilities:

• Responsible in inspection of RFI's and implementing stringent quality control of

Completed works from setting out, Excavation, pipe laying fitting installation,

Backfilling, Pipe testing, construction of valve chamber, construction Works for from

Structural excavation, formwork reinforcement,

Concreting, testing of poured concrete, masonry and finishing works.

• Direct the site supervision related to micro-tunnelling, Sewerage, drainage and

Associated works including the Pipes, manholes, chambers.

• Direct, assist and monitor the performance of the construction team working on the

Supervision of the construction of the micro-tunnelling and associated drainage

Works including the site, and the surveyors.

• Responsible for reviewing all, Inspection requests for related to the micro-tunnelling

And associated drainage / Sewage works.

• Coordinate with contractor for resolution of related issues;

• Instructions on construction matters regarding tunnelling and associated drainage

Works, utilities diversions and Installations, traffic diversions, and other related

Works.

• Generally supervise, review, monitor and report on progress of the micro-tunnelling

And associated works.

• Liaise with all parties for site safety.

• Attained and regular site meetings about issues related to micro-tunnelling and

Associated work and related Activities.

• Act positively, and participate in all health and safety issues at site, as required by

The Assistant Resident Engineer, and the Project Safety Representative.

• Ensure accuracy and completeness of records.

• Ensure safety goals are achieved on the project and oversee implementation of

Safety procedures on the project.

• Provide all necessary on-site direction and issue site instructions with respect to

Micro-tunnelling and associated Works, utilities and other related activities.

• Prepare progress reports as applicable.

• Ensure prompt exchange of correspondence and reports of performance of work.

• Comply with safety, health and risk management requirements.

COWI A/S Overseas, Qatar (2011 – 2015)

Senior Civil Inspector

Client : Public Works Authority Ashghal – Qatar

Contractor : Qatar Building Company

Project : Doha & Rayan Sewerage (Ain Khalid Area Sewerage) CP 626/2

Project Brief: Construction of Trunk Sewer Line in Ain Khalid Area, Total Length of

VC Pipe Laying is 154 Km and 25km Micro Tunnelling and 3709 Nos. of Manholes,

6412Nos. of House Connections and 1 No. of Pumping Station PS 44A.

Duties and Responsibilities:

Inspection of the excavation, dewatering, blinding, water proofing

Responsible for reviewing all, Inspection requests for related to the micro-tunneling and associated drainage / sewage works.

Coordinate his direct activities with the other discipline ARE’s to maintain consistency and integrity in the overall construction.

Comply with safety, health and risk management requirements.

Ensure accuracy and completeness of records.

Ensure correctness and completeness of ‘as-built’ drawings in the area of discipline.

Ensure safety goals are achieved on the project and oversee implementation of safety procedures on the project.

Inspection of FDT for Backfilling and Sub base

Prepare progress reports as applicable.

Inspection of Asphalt Laying

Act positively, and participate in all health and safety issues at site, as required by the Assistant Resident Engineer, and the Project Safety Representative.

ECG Engineering Consultant Group SA, Qatar (2010 - 2011)

Civil Inspector

2010 – 2011

Client: Qatar General Electricity and Water Department (KAHRAMAA) – Qatar

Contractor: SINOHYDRO Contracting Company

Project: Head Works Construction at West Bay Area, Umm Salal and Al Khor

Water Station.

Project Brief: Construction of reservoir of capacity 6 million gallon each in Al Khor and Umm Salal and 1 no. of Pump Station at Al Khor. 1200 and 1600 mm dia. Pipe lying about 15 Km in Al Khor and West Bay and Construction of Air valve and Washout chambers. FOC duct and FOC manhole chambers.

Duties and Responsibilities:

Inspection for inlet& outlet chambers, drain & overflow chambers.

Inspection of the excavation of trench, dewatering, bedding, laying, sand surround, backfilling and wrapping (double & single) of DI pipe of diameter 1200 & 1600 mm diameter and different type of chambers, thrust block, heat shrinkable sleeve, holiday test, bends, fittings, dismantling joints etc.

Monitors, review, comments and reports on progress payments, quality control and safety.

Inspection of the excavation, dewatering, blinding, water proofing, screed, construction & contraction joint, base slab, column, external & baffle walls, roof slabs, foam concrete etc.

Logs and monitors all contractors submittals (correspondence and shop drawings) to assure timely response, and process change and field orders for review by the resident engineer.

Prepares necessary draft correspondence for final approval by the resident engineer.

Assist as applicable, with pre-constructions activities for contracts relative to his site and provides input for all change orders and claims analysis.

Holds daily meeting with the contractor’s representative.

Prepare the weekly progress report and assist the resident engineer in preparing the monthly progress reports.

Reviews and approves the as built drawings for the final approval by the resident engineer.

Witness and supervises commissioning and start- up activities.

Studies and gives comments on the contractors’ claims.

ECG Engineering Consultant Group SA, Qatar (2008 - 2010)

Civil Inspector

2008 – 2010

Client : Qatar General Electricity and Water Department

Contractor : HBK Contracting Company

Project : Ras Laffan “C” Water Transmission Pipe Line

Project Brief: The Potable water transmission Pipe Line (83Kms) of 1600 mm

Diameter from Ras Laffan to Duhail including Washout and Air valve Chambers and

FOC duct and FOC manhole.

Duties and Responsibilities:

Complete site inspections, Checking and approval on various activities of work at site.

Inspection of water works with all aspects like excavation, laying, wrapping of DI pipe, chambers, thrust block etc. connected with water supply.

Inspection of the excavation of trench, dewatering, bedding, laying, sand surround, backfilling and wrapping (double & single) of DI pipe of diameter 1600 mm diameter.

Inspection of the air valve chamber, washout chamber, interconnection chambers, thrust block, heat shrinkable sleeve, bends, fittings, dismantling joints etc. and pouring of concrete.

Inspection of compaction test, cube strength test, holiday test, the pressure test, swabbing test, flushing & scouring of mains sterilization etc.

Inspection of micro tunneling work (for road crossing).

Over seeing quality control and safety matters on the site.

Checking drawings to ensure smooth installation process and preparation of daily, weekly and monthly progress report.

Inspection of the hydraulic swabbing test, flushing and scouring of mains, sterilization, pressure test, grouting of existing abundant pipe.

Raghava Engineering Consultants Company Hyderabad, India (2006 – 2008)

Civil Inspector

Client : Government Municipality Nalgonda

Project : Urban Development Works

Duties and Responsibilities:

Scheduling the project completion within the duration without any delay.

Checking drawings received at site over logistics capacities.

Supervision Inspection of work at site as per drawing and specification.

Inspection of water works with all aspects like excavation, laying, wrapping of DI pipe, chambers, thrust block connected with water supply.

Inspection of the hydraulic swabbing test, flushing and scouring of mains, sterilization, pressure test, grouting of existing abundant pipe.

Inspection of the soak away, soak away trenches ditches and cross drain works.

Inspection of the excavation of trench, dewatering and sand bedding. DI pipe laying for water supply.

Inspection of the hydraulic swabbing test, flushing and scouring of mains, sterilization and pressure test.

Inspection of the various ducts crossing like HV/EHV, S.L, ITS, irrigation, OHS and ITS loop.

Maintain efficient contract administration, coordination with client and contractor in various levels, controlling and monitoring.

Review of shop drawings and material submittals

Issuing site instruction & nonconformance report to the contractor.

To ensure the QA / QC policy for quality of work in execution.

ECCI & MRKR Constructions, India (2003 – 2006)

Site Engineer

Client : Government Irrigation Department A.P. India

Project : Alienate Madhav Reddy PROJECT

Duties and Responsibilities:

Supervision and operation independently of civil work as per drawing & specification.

Handling the labors and keeping a record of all the materials issued and thereby handling the stores effectively.

Supervising various activities going on the site including cost factor in control by keeping an eye on material wastage.

Monitoring cost and reducing wastage and take action where this deviate from agreed tolerances.

Maintain records of materials tests performed and executed works.

Review and record day to day maintenance team activities.

Marking the alignment on site for execution and mark the foundation plan for culverts and bridges.

And also responsible for the concrete work.

Supervise, monitor and execute the preventive maintenance programme.

Employment History

2011 – Present

COWI A/S Overseas, Qatar

2008 – 2011

ENGINEERING CONSULTANT GROUPS S/A, QATAR

2006 – 2008

RAGHAVA CONSULTANTS COMPANY HYDERABAD, INDIA.

2003 – 2006 ECCI & MRKR CONSTRUCTIONS CO. HYDERABAD, INDIA.

Contact this candidate