CURRICULUM VITAE

NUR AWANIS BINTI ROSLAN

*

Three (3) years experiences in Oil & Gas field for drawing flows as per engineering requirement in order to produce the construction drawing. I’m also was done my (On Job Training) under Kolej Kemahiran Tinggi Mara about six (6) month at local oil and gas fabrication company, Malaysia Marine and Heavy Engineering Sdn. Bhd. My experiences for training is under Architectural job scope as drafter for architectural offshore projects specific for Living Quarters to checking detail design, AFC, IFC and as-Built drawing (as per site redline markup). Experience includes drafting of structural detail design and shop drawing for fabrication work and Design Department, Shipbuilding & Conversion Division as drafter hull outfitting included FDDE (Feed Detail Design Engineering). Completely familiar with various commercial computer software’s such as Windows 7, Window XP,Autocad 2013, Microsoft Word, Excel and Internet Explorer. To develop my career in an established company and to contribute my knowledge and experiences to the company. UPSR 2000-2005 : Sek.Keb. Bandar Baru, Batang Kali,Selangor PMR 2006-2008 : Sek.Men.Keb. Bandar Baru, Batang Kali,Selangor SPM 2009-2010 : Sek.Men.Keb. Bandar Baru, Batang Kali,Selangor Diploma 2011-2013 : Kolej Kemahiran Tinggi Mara, Lubok Jong, Pasir Mas Name : Nur Awanis Binti Roslan

Position : Draughtsman (Structural/ Architectural Section) Department : Engineering Offshore Business Unit

Date Of Birth : 22 December 1993

Age : 24

Nationality : Malaysia

Marital Status : Single

Language : English/Malay

IC/Passport No. : 931***-**-****

Phone (Mobile) : +601*-*******

Email : ac4ydl@r.postjobfree.com

No.21 Jalan Meranti 3A/6,

Seksyen 3 Bandar Utama,

44300 Batang Kali,

Selangor Darul Ehsan.

PERMANENT ADDRESS

CONTACT

PERSONNEL PARTICULARS

SUMMARY OF EXPERIENCE

OBJECTIVE

ACADEMIC/TECHNICAL QUALIFICATIONS

CURRICULUM VITAE

CURRICULUM VITAE

NUR AWANIS BINTI ROSLAN

2

COMPANY DURATION POSITION

MALAYSIA MARINE & HEAVY ENGINEERING SDN BHD

Engineering Department (Engineering Department)

Pasir Gudang, Johor, Malaysia

June 2014 – Dec 2015 Draughtsman

MALAYSIA MARINE & HEAVY ENGINEERING SDN BHD

Engineering Department ( Engineering Department )

Pasir Gudang, Johor, Malaysia

Jan 2015 – Dec 2015 Draughtsman

MALAYSIA MARINE & HEAVY ENGINEERING SDN BHD

Engineering Department (Shipbuilding & Conversion) Pasir Gudang, Johor, Malaysia

Jan 2015 – Present Draughtsman/Designer

Draughtsman Architectural

- Check Client Drawings (AFC) from consultant for any discrepancy from Client Specifications.

- Check all IFC Drawings (Issue For Construction) from sub-contractor.

- Check all shop drawings from vendor for architectural equipment conduct by mentor.

- Prepared MTO (Material Take-off) for architectural equipment.

- Update MDR (Master Drawing Register) for quantity of monthly AFC and IFC revision.

- Prepared STQ (Site Technical Query), respond STQ from Contractor and update STQ Register.

- Prepared Bidding – Learning from mentor

- Update RLM (Redline Mark-up) from CMT (Construction Management Team).

- Filling – Soft copy to keep proper back up drawing for AUTOCAD.

- Prepare Transmittal of Project for ingoing and outgoing document or drawing received or issued.

- Site visit to familiar with equipment and material for architectural in LQ (Living Quarters).

- Perform Final Documentation and As-Built Drawings Draughtsman Structural

- Prepare shop drawing as per client drawing and monitoring filling system drawing list status.

- Responsible to update the latest revision of drawing as per daily issuing in drawing register

- Monitoring weekly and monthly progress against planning package

- Responsible to keep drawing in correct filling system for easy to access.

- To prepare MTO (Material Take-Off) – to identify the equipment/material to be used for the project.

- To prepare cutting plan for plate material

- Responsible to control MDR (Master Drawing Register) and check drawings/transmittal number for final documentation.

- To prepare NDE (Non Destructive Examination) drawing as per shop drawing.

- Prepare as-built drawing as per shop and NDE drawing latest revision.

- Update drawings as per redline mark-up from construction team.

- Site visit to familiarize structural & connections.

- Liaise with Project Engineers, Designers and PMT Technicians due to site technical progress and fabrication drawings. Designer Structural

- To prepare production drawing for outfitting items and Seating drawing

- To update amendments and changes in drawing

- To prepare as fitted/ as built drawings.

- To ensure drawings of all vessel are properly kept.

- Liaise with other department to solve clashing problem and IDC (Inter Discipline Check). DUTIES AND RESPONSIBILITIES

JOB/WORKING EXPERIENCES

CURRICULUM VITAE

NUR AWANIS BINTI ROSLAN

3

Project SK 316 Topside

Client : Petronas Carigali Sdn.Bhd

Duration : June 2014 – Dec 2015

Position : Draughtsman Architectural ( Practical Training ) Description : - Received AFC drawing and download drawing from TMJV server.

- Issued IFA (Issued for Approval ) and IFC (Issued for Construction) drawing.

- Update MDR (Master Drawing Register) for quantity AFC & IFC revision and inform to Project engineer.

- Update MTO (Material Take Off) within two week upon AFC received.

- Update Transmittal Number to DCC ( Document Control Center)

- Issued procedure and NDE drawings to DCC ( Document Control Center).

- Prepare as-built drawing from CMT ( Construction Management Team) Project Malikai EPC TLP

Client : Sarawak Shell Berhad (SSPC)

Duration : Jan 2015 – Dec 2015

Position : Draughtsman Architectural

Description : - Issued IFC drawing

- Issued IFA (Issued for Approval ) and IFC (Issued for Construction) drawing.

- Update MDR (Master Drawing Register) for quantity AFC & IFC revision and inform to Project engineer.

- Update MTO (Material Take Off) within two week upon AFC received.

- Update Transmittal Number to DCC ( Document Control Center)

- Issued procedure and NDE drawings to DCC ( Document Control Center).

- Prepare as-built drawing from CMT ( Construction Management Team)

- Prepare STQ (Site Techical Query) and respond STQ from contractor.

-Update STQ Register - Learning from mentor

- Prepare IPCO (Identification Of Potential Change Order Form)and issuance. - Learning from mentor

- Prepare bidding MTO – Learning from mentor

- Update Redline Markup from (CMT) construction Management Team

- Update MDR and update RLM to project engineer.

- Site Visit

Project BsDP – BESAR Development Project

Client : Petronas Carigali

Duration : Jan 2015 – Dec 2015

Position : Draughtsman Architectural

Description : - Received AFC drawing and download drawing from server and issued IFC drawing

- Prepare WCR (Weight Control Report) and update MTO (Material Take Off). Project F12JT-A

Client : Petronas Carigali

Duration : Jan 2016 – Dec 2016

Position : Draughtsman Structural

Description : - Prepare shop drawing as per client drawing

- Filling – Soft copy to keep proper back up drawing for AUTOCAD

- To monitor, maintain and develop good documentation control as a means ensuring the effective Implementation of quality system.

- Preparing Cutting Plan

- To prepare MTO (Material Take-Off) – to identify the equipment/material to be used for the project

- To prepare NDE (Non Destructive Examination) drawing as per shop drawing.

- Responsible to prepare the back up file weekly.

- Prepare as-built drawing as per shop and NDE drawing latest revision.

- Site visit to familiarize structural & connections PROJECT INVOLVED

CURRICULUM VITAE

NUR AWANIS BINTI ROSLAN

4

Project FSO Benchamas 2

Client : MISC Offshore Floating Terminals (L) Limited. Duration : Jan 2017 – Dec 2017

Position : Draughtsman/Designer Structural

Description : - Prepare shop drawing from vendor data

- To prepare MTO (Material Take-Off) – to identify the equipment/material to be used for the project

- To update amendments and changes in drawing.

- Liase with Project Engineers, Designers and PMT Technicians due to site technical progress and fabrication drawings.

- Site visit to familiarize structural & connections.

- Revised drawing and MTO based on client comment.

- Prepare production drawing for outfitting items and Seating drawing for mechanical & electrical equip.

- To carry out other functions as assigned by technical executive according to workload of section.

- Site visit to familiarize structural & connections

- Revised drawing based on IDC (Inter Discipline Check) Seconded for Project Sofec (PFLNG2 External Turret Mooring System) & Sepat A-Topside and Substructure Duration : 1 month

Position : Draughtsman/Designer Structural

Description : - Preparing Cutting Plan (Sepat)

- Revised seafastening drawing based on latest revision (Sofec)

- Prepare IFC jacket drawing for boatlanding fixed caged ladder and handrail (Sepat)

- Prepare IFC jacket drawing for buoyancy tanks (Sepat)

- Prepare IFC for turret support block bottom plate (Sofec)

- Prepared NDE drawing as per shop drawing (Sepat)

- Prepared stiffener details based on AFC drawing from client (Sofec)

- Revise drawing and MTO based on latest revision (Sofec & Sepat) Course Microsoft Word & Excel

NIOSH - Authorized Entrant And Standby Person For Confined Space (2017) Safety Induction Course (June 2014)

QHSE Safety Briefing (April 2015)

Project Safety Induction

Design Software : Autocad 2007 – 2016 (Drafting Program) Sketch Up (3D Model and Animations),

Adobe Photoshop CS4 (Graphic and Presentation)

Window Applications (Software Utility)

Microsoft Outlook (Email Software).

Word Processor : Microsoft Excel

Microsoft Office

Microsoft Power Point

RELEVANT COURSEWORKS / TRAININGS

COMPUTER LITERACY/PROGRAM

CURRICULUM VITAE

NUR AWANIS BINTI ROSLAN

5

Name : Johar Bin Dros

Telephone : 012-*******

Position : Designer – Structural

Company : Malaysia Marine Heavy Engineering Sdn. Bhd Relationship : Mentor @ Supervisor

Name : En. Azeli Bin Samsuri

Telephone : 012-*******

Position : Senior Technical Engineer - Structural/Architectural Company : Malaysia Marine and Heavy Engineering Sdn.Bhd Relationship : Mentor @ Supervisor

Name : Patar Rudy Tohom

Telephone : 017-*******

Position : Executive Engineer - Structural/Architectural Company : Malaysia Marine and Heavy Engineering Sdn.Bhd Relationship : Mentor @ Supervisor

REFERENCES

Contact this candidate