Sign in

Engineer Chemical Engineering

Houston, TX, 77007
March 21, 2018

Contact this candidate



(M.S. Chemical Engineering, Texas A&M)

*** ****** **, *******, ** 77007

Tel: 361-***-****, Email:


Experienced and talented professional Process Engineer / Chemical Engineer / Scientist, seeking to contribute significantly to a dynamic organization’s goals.


Possess 7+ years Process Engineering Experience:

oOil & Gas Processing Plants, Refining, Water, Polymers, Biotechnology and R&D

oChemical industry, Academia, LNG, Offshore Production Facilities

oPharmaceuticals Production Plants, Operations & Engineering

Possess 10+ years Business / Accounting Experience

Familiar with Oil and Gas Industry, ExxonMobil and BP work Standards, Practices, and Safety Systems


Chemical Plants, Pipelines, Gas Plants, Refineries & Upstream Oil & Gas Production

Federal Energy Regulatory Commission (FERC) Process

FPSO Topsides, Fermentation Plants & Biotechnology

Software Competencies: HYSYS, PRO/II & Design II, HTRI, MS Visio, Microsoft Office Suite

Front End Engineering Design (FEED): Materials/Energy Balance, PFD and P&ID

Design and Sizing Equipment: Heat Exchangers, Pumps, Tanks, Separators, etc.

Pressure Relief System Device Analysis, PSM, PHA, ASME & API standards, cGMP FDA, MCA

Knowledge of LNG/FLNGs, GTL

Received Commendation for saving BHP Billiton $5.0M as part of Jacobs’ Value+ Engineering work

Received Client Commendation for engineering work on award winning SABIC Project


Chemical Engineer August 2016 – August 2017

Federal Energy Regulatory Commission (FERC), 888 First Street NE, Washington DC 20426

Alaska LNG - Prefilling and CP Stages work with submittal organization, PSFG gap analysis

Cameron LNG - CP Stage work: Construction and Operation Inspections, NTPs, Pre-Inspection Letters, Construction Reports, FOIA Requests, Design Spill Review, Safety Reviews (PRV Review, Safety Philosophy Review)

Other Projects: Gulf LNG, Texas LNG, Annova LNG, Port Arthur LNG, Transco LNG, total Peaking Services

Other Project Work - MOUs, NTPs, ERP Reviews, Guidance Document Reviews, Client and EPC Reviews, BFD/PFD Presentation, Semi-Annual Reports

Process Engineer November 2014 – February 2016

S&B Infrastructure, 3535 Sage Road, Houston, TX 77056

Valero Pipeline Corpus Christi Project – Steady State and Dynamic Modelling – Stoner Pipe Simulator (SPS)

US Government Strategic Petroleum Reserve – Pipeline Modelling to prevent cavitation and erosion – HYSYS Modelling

Regency & Grand Mesa Pipeline Project –Station Hydraulic Modeling - pipe velocities, sizing, specifications, P&IDs, PFDs, - HYSYS and SPS Modelling

Other – gas pipeline, PSVs, Water Treatment Systems: Waste Water, Storm Water, Drainage

P&ID, PFD, MSD, Heat & Material Balances, Interface Tables, Equipment Lists, Hydraulics: Line Sizing, Pump Sizing, Sump Sizing

Process Engineer February 2013 – March 2014

Fluor, 1 Fluor Daniel Drive, Sugar Land, TX 77479

SASOL Lake Charles Chemicals Project, Louisiana – Utilities & Offsite

Water Treatment Systems: Waste Water, Storm Water, Drainage

P&ID, PFD, MSD, Heat & Material Balances, Interface Tables, Equipment Lists

Hydraulics: Line Sizing, Pump Sizing, Sump Sizing, HYSYS, PALS Simulations, Heat Exchanger Sizing

MBR/MBBR Studies & Vendor Bid Tabs, Scheduling, Cost Estimation, RFQ

Plant Design / Planning / Optimization, Client Reviews

Feed & Detailed Engineering, In-house and Client Design Review Meetings

Process Engineer May 2011 – December 2012

Jacobs Engineering, 5995 Rogerdale Road, Houston, TX 77072

ExxonMobil King Ranch Gas Project, SABIC – PBR, BP Texas City, BHP Billiton Eagle Hawk Gas Plants

Jacobs’ Value+ Engineering ($5.0 M Savings)

Equipment Data Sheets (pumps, heat exchangers, tanks, filters etc.)

P&ID, PFD, Heat & Material Balances, Hydraulics, line sizing

HYSYS Simulations, HTRI, Mathcad

Project Costing (Scheduling, Cost Estimation, RFQ), Plant Cost Analysis

Jacobs HYDRA (Hydraulics Program), JE Pump (Pump Calculations), Flare KO Drum/Header

New PSV sizing from basics, scenario analysis & relief load calculations, Phase 2 Relief System Analysis – Mitigation Work - Select and Execute Stages

Process Engineer / Process Safety Consultant (Contract / Project Work October 2008 – April 2011

Bayer Technology Services, 8406 Farm Rd, Baytown, TX 77523

Lloyd’s Register, 10575 Katy Freeway, Suite 350, Houston, TX 77024

Siemens Energy Inc., 4615 Southwest Freeway, Suite 900, Houston, TX 77027

Plant Experience, P&ID, PFD generation, Equipment Sizing, Pump Calculations

Overpressure Pressure Analysis for BP Texas City Refinery – Resid Hydro Treater (RHU), Alky-3, Ultra Cracker etc. and Bayer institute, WV

Relief System in depth analysis (following API RP-520, 521, 2000, ASME VIII Div.1 etc.) using software HYSYS and VMG Sim

System Identification, PFD generation, Contingency / Scenario Analysis, and Relief Load Analysis, Sizing Relief Valves, Process Safety Management (PSM) & Process Hazard Analysis (PHA)

Contingency analysis, sizing and specification of PSVs, PSV inlet & outlet piping hydraulics calculations.

Training & Supervising Junior Process Engineers / Represented Siemens at OTC 2009

Process Engineer April 2008 – October 2008

Oil and Gas Solutions, 10255 Richmond Ave, Suite 450, Houston, TX 77042

Developed P&IDs, PFDs and UFDs for Offshore production facilities (FLNGs, FPSOs, etc.)

Performed Hydraulics calculations to determine line sizes for process & utility lines & pump hydraulics.

Determined process design conditions (Design Pressure & Temperature) for new and replacement equipment, world’s first FLNG, Sized Pumps, Vessels (2-phase & 3-phase Separators, Towers), Heat Exchangers, Rated & Designed Air Coolers and Shell & Tube Exchangers using HTRI

Performed Heat & Material Balances calculations for oil & gas processing plants, pipe sizing, simulations

Research Assistant October 2006 – December 2007

Texas A & M University – Kingsville, 700 University Blvd, Kingsville, TX 78363

Statistical Thermodynamics and Computer Simulations of Molecular Dynamics of gas hydrate formation kinetic for Methane and Ethane Hydrate - Used Computer Simulation Package ~ MOLDY

Relating Activation Energy and Kinetic Energy – Presented at A.I.Ch.E. 2007 Annual meeting

Process Chemical Engineer September 1997 – September 1998

Eli Lilly ~ Speke Operations, Liverpool, England, UK

Developed Heat & Material Balances & involved in the development & modification of PFDs & P&IDs.

Pilot and Commercial Plant Trials and Operations, Process Modeling, Improved Impeller Design

Operation and Maintenance of Fermentation Vessels


Computer Programmer (Full-Time & Part-Time)

Love INC - Corpus Christi, TX 78404 June 2003 – June 2004

State of Tennessee, Nashville, TN 37243 January 2001 – June 2001

Database design & development using MS Access and Visual Basic

Computer Networking, Equipment Installations / Software Programming, Manual Creation, User Training

Web Page Development, Beta Testing, Program Documentation / User Manual Creation / MS SQL Server

Accounting (Part-Time) Dr. M.A. Quasem ~ Stanley Health Center, Co. Durham, UK March 1983 – May 1999

Accounting / Tax / Payroll / Wages / Book Keeping / Recruitment / Database / Customer Services Work


Engineer-In-Training (EIT) Certification: – Texas Board of Professional Engineers (10/09)

Masters: Chemical Engineering – Texas A & M University Kingsville (12/07)

Masters: Industrial Biotechnology – Newcastle University, England (12/93)

Bachelors: Chemical Engineering – Newcastle University, England (6/99)

Bachelors: Biological Sciences – Heriot-Watt University, Scotland (6/92)

Associates: Computer Information Systems – Del Mar College, Corpus Christi, TX (5/05)


Mr. Shahid M. Anis

Environmental Project Manager

Office of Energy Projects

Federal Energy Regulatory Commission

Room 61-14

888 First Street, NE

Washington D.C. 20426

Tel: 202-***-****

Mr. Mark Smith P.E.

Senior Process Engineer

Formerly with Bayer Technology Services

16727 Lighthouse View Drive,

Friendswood, TX 77546

Tel: 832-***-****

Contact this candidate