Paulo Cyrus G. Abaring

Company Address: PermanentAddress:

BRC Industrial (Saudia)Limited Dagat Ki Davao,Valencia City, Industrial Area, Phase-1,Jeddah, Kingdom Of Saudi Arabia Bukidnon,Philippines 8709 P.O.Box 5489

E-mail:ac4m8h@r.postjobfree.com

Cell number: +966-*********

Objectives:

To obtain a position as an Instrumentation/Electrical/ Electronic technician in a large-sized or medium- sized manufacturing or processing company, maintaining, installing, calibrating, troubleshooting, and repairing electrical, electronics,

pneumatic and hydraulic equipments either local and international firm. Education:

College:

Technological University Of The Philippines-Visayas Electronics Technology Talisay City, Negros Occidental Specialization: Industrial and Communication Electronics

Years Completed: 1988-1991

High School:

Central Mindanao University High School Years Completed: 1983-1987 Maramag,Bukidnon,

Elementary School:

Busco Elementary School Years Completed: 1977-1983 Butong, Quezon, Bukidnon

Experience:

BRC Industrial (Saudia) Limited, Jeddah, Kingdom of Saudi Arabia- Electronic Technician (2014-Present)

Maintenance and troubleshooting of overhead cranes (Demag, Abus, Street and Stahl) with conventional electrical and electronic controls.

Maintenance and troubleshooting controls of Rebar epoxy coating line using Ajaxtocco induction heaters, Blastec blasting facility, Gemma epoxy coatings and inverter driven (Emerson Control Techniques) conveying system.

Maintenance and troubleshooting PLC (Siemens S7) and logic controls of deformed wire draw facilities using AC and DC motors for its bull blocks and spoolers also use Inverters(ABB) and Converters(Impiante)for motor controls.

Maintenance and troubleshooting of wiremesh (EVG Austria made)machines with electrical conventional controls and PLC(Siemens S5,Omron) controls used for the sequence, Hydraulic starters and pneumatic valve controls.

Maintenance and troubleshooting of epoxy wiremesh coating facility which involve of pre heating, powder coating station and curing station using automatic burner station with single loop temperature controllers(Electrons).

Maintenance and troubleshooting of cut and bending machine such as Schnell Barwiser controlled by Unicon PLC and EVG Polybend controlled by Beckhoff Canbus PLC and Lenze inverter drives.

Maintenance and troubleshooting of EVG straight cutting machine controlled by Beckhoff PLC and Lenze and SEW inverters drives.

Maintenance and troubleshooting of Massacut straight cutting machine controlled by Allen Bradley PLC and EVG Polycut straight cutting machine controlled by EVG PLC controller.

Maintenace and troubleshooting of American made KRB shear lines and KRB power bender controlled by a PC based PLC and Mitsubishi Inverter Drives.

Maintenance and troubleshooting of Canadian Wire Galvanizing line which was a Zinc bath controlled by Uni op and Siemens Micromaster Drives for its 24 take up lines.

Maintenance and troubleshooting of various PVC coating line for G.I. wires used for chainlinks fencing using extruders and induction heaters controlled by single loop controllers.

Maintenance and troubleshooting of Gabion, Chain links and Barbed wire machines controlled by PLC and Conventional Controls.

Busco Sugar Milling Company,Incorparated Busco, Butong,Quezon Bukidnon,Philippines - Instrumentation Technician II:(1991-2014)

Maintenance and installation electronics equipments like electronic differential transmitters such as Yokogawa EJA and EJX series, Yamatake- Honeywell, Siemens Sitrans Series, flow transmitters like (Yokogawa, ABB and Yamatake), brix transmitters such as Fletcher- Smith and K-patents, pressure transmitters(Yokogawaand Siemens), absolute transmitters, radar level transmitters(Vega), magnetic level transmitters(Endress &Hausser), capacitive level transmitters(Endress&Hausser, oxygen analyzers likeYokogawa EXA series, single loop controllers(Abb, Siemens Siparts and programmable logic controllers(Siemens S7,Hitachi,Allen Bradley and Telemicanique) used in process control automation of sugar manufacturing plant including Boilers and Power House.

Installation and maintenance of all pneumatic differential transmitters (Yokogawa and Yamatake_Honeywell) used on steam generation plant to supply all mill steam turbines and turbo generators.

Maintenance, installation and repair if necessary all electronics transducers such as (KTB, Pyromation and Endress & Hausser) resistance temperature detectors, thermocouples(Pyromation, KTB, Endress and Hausser), load cells (Avery), infrared temperature sensors(Endress and Haussers), magnetic sensors, inductive proximity sensors and compact stalling sensors used particularly on various application such as an early warning devices to prevent further damage of the equipments used on the entire sugar manufacturing plant.

Installation and maintenance of all frequency inverters(Toshiba, Teco, Danfoss, Siemens Simovert, ABB,Siemens Micromaster and Allen Bradley) and converters(Reliance Electric) for all ac motors and dc motors respectively used in the entire plant.

Repair and maintenance of all pneumatic equipment such as air piloted directional valves and pneumatic cylinders(Festo,Wabco,Asco and SMC).

Maintenance of compressed air dehumidifiers and driers(Domnick Hunter And Ingersol Rand).

Maintenance and installation of all monitoring cameras, video multiplexers and monitors.

Perform fabrication and installations of transmitters detecting lines, conduit pipes, and cable trays.

Perform calibration of electronic differential transmitters and pneumatic transmitters and make a calibration record of all the transmitters and put a calibration stickers on Boiler,raw and refined sugar manufacturing.

Perform calibration and maintenance of various laboratory equipments such as electronic spectrophotometers, refractometers, precision scales, colorimeter, ph,conductivity,distelling aparatusses and other electronics apparatuses use in sugar analysis.

Knows how to interpret Electrical drawings, Electronic schematic diagram and PLC ladder diagrams.

Can analyze Pneumatic drawings, Hydraulic drawings,Electronic,Logic, Electrical and PID Schematic Diagrams.

Can calibrate and repair if possible various types of Gauges : Bourdon Tube C type, Diaphragm Type, Capsule gauges, And bellows element.

Perform shutdown maintenance of various types of control valves such as diaphragm actuated valves, rotary actuated valves, modulated linear dampers and motorized modulating rotary valves used in different areas of the plant, this actuators came in different brands such as Yamatake-Honeywell, Keystone, Masonellan, Fisher, Ebro Armaturen, Kyb, Amri, Jamesbury, Nakakita,Foxborro and Azbil.

Can calibrate and repair all types of eletro-pneumatic and pneumatic valve positioners used in rotary and linear applications in various brands such as Azbil, Keystone, Dresser-Masonellan, SMC, Appex,Yamatake,YTC and others.

Additional:

Busco Cable TV Network –Technical Head (2000-2010)

Oversee all the operation of Busco Cable Television owned by the community both outside plant and head end facilities.

Gained experience on troubleshooting of outside plant equipment and head end such as decoder box, signal combiners, trunk amplifiers, optical fiber transmitters and receivers, taps and signal distributors.

Trough this experience able to pass cable installer and cable technician exam from Philippine Cable Television Association.

Trainings:

Tel-a-Train Inc.(Asia) Solid State Motor Controls Seminar-July21,1994- hands on training on Solid state motor control circuits assembly and troubleshooting. Siemens S7 PLC Basic Training Course-February 28 to July 31,2004-48 hrs- Course covers Siemens PLC basic programming and hands on.

Instrumentation Basics – March 17 to April 15, 2009 – the course covers the topics on Calibration and Accuracy, Signals, Pressure, Temperature, Level, and Flow measurements. Hydraulics - April 23 to 30,2009- course covers the topics on Hydraulic Drives, Hydraulic Motors, Controls and Applications.

AC/DC Drives-April 16 to 22,2009- 10 hours topic on DC Converters, DC Motors, AC Drives/ Frequency Inverters and Ac Motors.

References:

Engr. Marifi P. Tadena

Department Head

Instrumentation Department

Busco Sugar Milling Company, Incorporated

Engr. Salvador M. Bañas

Factory Manager

Busco Sugar Milling Company, Incorporated

Engr. Feliciano C. Perater

Human Resource Head

Busco Sugar Milling Company, Incorporated

Heide B. Sancho

Chairwoman

Busco Cable TV Network

Busco Sugar Milling Company, Incorporated

Contact this candidate