T: 415-***-**** E:ac4kmx@r.postjobfree.com

SEAN PHELAN

OBJECTIVE

Position as Telecommunications Transport Network Engineer

SUMMARY OF QUALIFICATIONS

I have 20 years work experience in Telecommunications.

I started my career as an Outside Plant Technician (Lineman), where I first began to learn about the physical design and construction of Telecommunications network facilities. I then worked as an Installation and Repair Technician, where I learned about delivery of service to end users, both residential and commercial. But I have spent the majority of my career in Telecommunications working as a Transport Technician and Engineer, working with core Telecommunications transport network facilities, hardware, software and related network elements. I have worked with transport network elements connecting core network devices such as class 5 voice switches, VOIP softswitches, Cisco, Juniper and Arista provider edge routers and to end user voice and data terminal devices, the PSTN and carrier ISPs. Some of these include Tellabs Titan 5500 and Force 10 (formerly Turin) Traverse series 600/1600/2000 DACS, Tellabs 532, AFC, Fujitsu 1500/2400/4800, Cerent 454, Cisco 1454 SONET-ADM, Tellabs/Cablespan 2300 and Adtran Total Access 230-5000 series TDMs, Infinera ATN/DTN/DTN-X ILS and Infinera, Ciena, BTI and JDSU DWDM sytems, and Hatteras MEOC equipment. I have worked with various transmission signaling means, from fiber-optic, paired-copper and coaxial cable to wireless RF transmission, and associated phases and components, including ADC, Corning, Panduit and Telect DSX1/DSX3 panels and FPPs, SC/LC/MPO/FC/ST fiber patch panels. I have worked with various test equipment devices, communications analyzers, Agilent spectrum analyzers, OPMs, OTDRs, EXFO, Digital Lightwave and Acterna BERT testers, TTC T-BERD 224/310/950 and Sunrise Telecom Sunset T1/T3/T10/XDSL model TDM testers, all physically on-site and some by means of remote access. I have also worked with DC power (in addition to AC power), cabling, terminating, maintaining and powering both inputs to and outputs from BDFBs, BDFPs and FAPs. In working with power I have used WE 188A (Ray Gun) high voltage tester, volt-ohm meters, multi-meters and clamp meters. In working in enclosed, inadequately ventilated areas I have worked with multi-gas meters (canary), and CO/O level meters and am trained in purging enclosed areas for work purposes. I have experience with monitoring, maintaining and reporting on Liebert air handling systems as well as other air handling and HVAC systems. I have experience working with IP networking, routers and switches, and TCP/IP protocols and configurations. I have worked with and performed maintenance on production network servers. As Lead Transport Technician and later Transport Engineer, I was responsible for writing MOPs, discussing the procedure with the technicians under my supervision, scheduling the maintenance windows and the technicians for the appropriate times when the service-affecting or potential interrupt work was to be performed, and then supervising and participating in hot-cuts, migrations, hardware/software upgrades and other maintenance window projects onsite with all personnel during scheduled TOPs. I also was responsible, post installation, for the planning, design and provisioning of services and the testing, prior to, of all levels of facilities and circuits: (DS0/DS1(T1)/DS3(T3)/VT1/STS1/STS3/STS3C/OC3/OC12/OC48/OC192/OC768/DWDM: 10GB/40GB/80GB/100GB). During outage situations I have troubleshot these various levels of facility transmission and associated equipment and systems.

Engineering, test and turn-up, programming, provisioning, design of MOPs, migration, integration, operation, maintenance, software/hardware upgrade/replacement during off-hour maintenance windows, troubleshooting, isolation and resolution of trouble source(s). Knowledge of and experience with design, engineering, site surveying, facilities inspection, ordering, construction, power/AC/DC/BDFBs, equipment installation, site infrastructure, Points of Presence/Meet Me Rooms/Cross-Connects, Ingress/Egress/Longhaul/Shorthaul/Backhaul/TTP (To The Premise) Circuits/Facilities/Transmission means.

●Engineering: concept, design, planning, acquisition, implementation and deployment

●Technician: pre-fielding, installation, test, turn-up, operation, maintenance and upgrade

●Supervisor: communication, training, assessment, delegation and duty assignment

●Under pressure and duress, conceive and enact immediate short term solutions

●Plan, refine and deploy long term strategies for proficient current and future needs

CAREER ACCOMPLISHMENTS

●Service Delivery installations, build-out, adds, moves, changes, augments, decommissioning and migrations to and within the Google network infrastructure.

●Field Auditing of existing Google network infrastructure hardware and facilities.

●Reconciling of database and engineering documentation discrepancies with existing as-built network infrastructure against as-built in field.

●Support of Google NetDeploy, OEO and CORP groups in installation, turn-up, operation and maintenance of their hardware and systems within the Google network infrastructure.

●Collaboration with, and providing of service to various groups, departments and individuals within Google for a variety of services from high priority install and interrupt work to receiving, inventory, staging and installation of new Google network elements, systems and equipment.

●REINFORCEMENT of cable labeling to Field Operations personnel for communication between (each 2) physical points in field and most immediate and verifiable point within network operations.

●To work with proven, competent and familiar field personnel, to achieve goal of field and engineering concurrence between Engineering and Documentation and Field Operations personnel.

●In collaboration with IP department, design, test and turn-up of Telekenex national Ethernet Over SONET protected ring.

●Design, build-out, test and turn-up and deployment into production of Telekenex national SONET fiber optic broadband network.

●Design, build-out, test and turn-up and deployment into production of Telekenex California DWDM and SONET fiber optic broadband networks.

●Engineering of and maintenance performance of massive Telekenex core network TDM facilities migration from TDM DACS to SONET-ADM DACS system on active production network (concentrated high density to high density versatility to accommodate network expansion into larger geographic area).

●In collaboration with Voice Switch Translations department, migration of Telekenex class 4 trunking (to PSTN) and end-user facilities from class 5 soft switch to higher density and functionality class 5 soft switch on active production network.

●Engineering of and maintenance performance of massive RCN/Astound core network TDM facilities migration from SONET-ADM to TDM DACS system on active production network (versatility to higher density to accommodate growth in concentrated area).

●Build-out, test and turn-up and deployment into production of RCN/Astound Northern California SONET fiber optic broadband hybrid fiber-coax network.

●Build-out of Pacific Bell/AT&T Northern California outside plant network.

PROFESSIONAL WORK EXPERIENCE

10/2016 to present

Astreya at Google, Inc.

Network Deployment Engineer

Core Job Duties

Provide corporate office network engineering and implementation

Engineer and implement office pre-build work in support of regional build rooms.

Coordinate with hardware team for engineering and implementation of office pre-build work in the regional build rooms

Configure network hardware

Deploy network hardware in offices

Turn up network hardware in office

Update all documentation pertaining to office deployments, upgrades and decommissions

Update all monitoring tools pertaining to office deployments, upgrades and decommissions

Provide ongoing technical support and problem resolution for office deployments, upgrades, decommissions and general office network problems

Coordinate with the infrastructure team in all aspects of network equipment installation, power, cooling and cabling

Coordinate with the VC team in all aspects of equipment installation, testing and problem resolution

Coordinate with team in all aspects of equipment installation, service testing and problem resolution

Coordinate with team in all aspects of network equipment installation, support and problem resolution for network equipment that enables voice services

Participate in the office environment team weekly meetings

Participate in regular office deployment meetings.

Participate in regular staff meetings

Improve documentation and implementation process

Provide weekly progress updates to the office project manager and the office environment owner

Provide onsite assistance when necessary

Support various teams in developing network standards

Support various teams in developing network projects close out procedures

Attend weekly project manager meetings and provide update

03/2015 to 10/2016

Astreya at Google, Inc.

Telecom Metro Field Engineer

Observe, maintain and operate within Google POP sites regarding space, power and safety.

As an operator within these facilities I pursue the goals of safe operation and delivery of power to the cage for all Google personnel. It is my responsibility to maintain awareness, keep notes, and report if the Google personnel who will work in the cages I am assigned to will require alterations in regards to space, power and safety standards. Maintain sites that in the event of any visit to a site I am responsible for, that it acceptable to be visited and entered. Audit, record, identify and correct discrepancies between Engineering documentation and established records and the existing infrastructure in the field, and to reconcile the field data that SFO MFS verifies, and ensure that all field infrastructure labeling clearly reflects the existing infrastructure in a way that is universally comprehensible.

Responsibilities: - Maintain the highest quality standards in all assigned data center locations and remote points of presence (POP). - Perform physical installation, repair, maintenance, and testing activities as directed with meticulous attention to driving and maintaining the highest quality standards in the telecommunications industry. - Perform card adds or replacements, software upgrades, and associated testing. - Provide site survey support for OSP and ISP projects, as well as large space & power and/or equipment deployments. - Perform site audits and reconcile data discrepancies in coordination with Network Surveillance and other groups as necessary. - Recommend improvements to processes that may impact the quality of our network assets or improve overall efficiencies for any related process or system. - Manage local construction vendors working on behalf of the company to ensure compliance with installation, repair, maintenance MOPs and standards, as well as quality and cleanliness. - Meet/coordinate with Local Exchange Carrier (LEC) and other technicians to facilitate timely installation, repair, and maintenance activities as necessary. - Perform site surveys in support of network builds, augments, or decommissions. - Assist in coordinating site access, equipment staging, and asks

07/2014 to 09/2014

T-Mobile

Transport Engineer

Generate Router Method of Procedure documentation for Implementation. Responsible for design & utilization for the physical network transport facilities for switched access to support RIP activities. Allocation of circuit facilities assignment (CFA) for various bandwidths and updating of the transport database (NRM) for type 2A, 2B, 2C, 800, type 1, LD and any other auxiliary trunks. Issue and coordinate work orders and assist switch operations and provisioning for clarification as needed. Create Engineering design packages for project related activities. Provide daily/weekly updates and reports. Updating of various databases on project activities related to RIP.

10/2009 to 03/2015

DVV Telecom

Transport Engineer/Technician

Design (CLR/DLR creation, reading and analysis), engineering, installation, wiring, powering, turn-up, operation, monitoring and maintenance of telecommunication hardware and facilities at network core locations, as well as peripheral locations (hubsites, data centers, co-locations, fiber nodes and telco central and end offices). Engineering, installation, test (acceptance), turn-up, operation and maintenance of telecommunications network transmission, switch, IP and remote access hardware, equipment and facilities.

07/2010 to 10/2010

Telekenex

Transport Technician/Engineer

In collaboration with IP department, augmentation of Telekenex national Ethernet Over SONET protected ring. Design, build-out, test and turn-up and deployment into production of Telekenex national SONET fiber optic broadband network. Design, build-out, test and turn-up and deployment into production of Telekenex California DWDM and SONET fiber optic broadband networks. Engineering of and maintenance performance of massive Telekenex core network TDM facilities migration from TDM DACS to SONET-ADM DACS/EOS/VOIP system on active production network (concentrated high density to high density versatility to accommodate network expansion into larger geographic area). In collaboration with Voice Switch Translations department, migration of Telekenex class 4 trunking (to PSTN) and end-user facilities from class 5 soft switch to higher density and functionality class 5 soft switch on active production network.

03/2004 to 09/2009

Telekenex

Lead Transport Technician/Engineer

Supervision of the Transport Department responsible for equipment and circuit design, installation, wiring, powering, turn-up, operation, monitoring and maintenance of telecommunication hardware and facilities at network core location (data center), as well as peripheral locations. In collaboration with IP department, design, test and turn-up of Telekenex national 2.5 GB Ethernet Over SONET protected ring. Design, build-out, test and turn-up and deployment into production of Telekenex national SONET fiber optic broadband network. Design, build-out, test and turn-up and deployment into production of Telekenex California DWDM and SONET fiber optic broadband networks. Engineering of and maintenance performance of massive Telekenex core network TDM facilities migration from TDM DACS to SONET-ADM DACS/EOS/VOIP system on active production network (concentrated high density to high density versatility to accommodate network expansion into larger geographic area). In collaboration with Voice Switch Translations department, migration of Telekenex class 4 trunking (to PSTN) and end-user facilities from class 5 soft switch to higher density and functionality class 5 soft switch on active production network.

06/2002 to 03/2004

AVMI

Multimedia Installation/Service Technician

Installation, wiring, powering, turn-up and maintenance of multimedia hardware and facilities at commercial and residential locations.

07/2000 to 09/2001

RCN/Astound

Transport/SwitchroomTechnician

Installation, wiring, powering, turn-up, operation, monitoring and maintenance of telecommunication hardware and facilities at network core location (switchroom), as well as peripheral locations (hubsites, data centers, co-locations, fiber nodes and telco central and end offices). Engineering of and maintenance performance of massive RCN/Astound core network TDM facilities migration from SONET-ADM to TDM DACS system on active production network (versatility to higher density to accommodate growth in concentrated area). Build-out, test and turn-up and deployment into production of RCN/Astound Northern California SONET fiber optic broadband hybrid fiber-coax network.

11/1999 to 07/2000

RCN/Astound

Installation and Repair Technician

Installation and repair of cable television, telephone and internet service hardware and facilities at residential and commercial locations.

04/1997 to 09/1998

Pacific Bell/SBC/AT&T

Outside Plant Technician

Installation, placement and removal of telecommunication network facilities and hardware (outside plant) including poles, strand, cable, related hardware, and other equipment associated with telecommunication network construction. Build-out of Pacific

Bell/AT&T Northern California outside plant network.

EDUCATION

04/1997 – current

Various Telecommunication Industry Carriers/Vendors

Various Telecommunication Standards, Procedural and Operations Training/Certifications

09/1990 to 12/1993

California State University, Long Beach

Business Administration/English

09/1986 to 05/1990

Sacred Heart Cathedral High School, San Francisco, CA.

High School Diploma

SKILLS

●Extensive use of desktop and laptop computers.

●Extensive use of PC software including MS Windows, MS Office, Lotus Notes.

●Extensive use of Mac software and applications.

●Extensive use with Google Docs.

●Extensive experience with and familiarity with Telecommunications network facilities including outside plant, aerial and underground hubs/nodes, Data Centers, Central and End Offices, Meet Me Rooms, Co-locations and Hubsites, including their separate and related infrastructures, standards and procedures, and how to read, edit and create documentation and perform work involving interconnections between various entities.

●Training and work experience with Bell, telco and Telcordia standards and practices in telecommunications OSP and ISP environments.

●Extensive experience working in Data Center, MMRs, Co-locations, Central and End Offices design and best operational practices involving the installation, monitoring, maintenance, upkeep, upgrade, repair, migration, cutover and decommissioning of equipment, power and transmission facilities equipment and cabling, hot and cold aisle separation and airflow, cold aisle containment.

●Extensive use of and experience with, including installation, powering, configuration, system provisioning, circuit and services provisioning, maintenance, upgrade, repair, migration and decommissioning and migrating (cutover) of various Telecommunications Transport systems and equipment, including Infinera, Ciena, BTI, JDSU, ADVA, Tellabs, Fujitsu, Cerent, Cisco, NorTel, Turin, Force 10, AFC, AdTran, Hatteras, BT Electronics, and other Asynchronous, SONET, SDH and DWDM ADMs (Add/Drop Multiplexers), TDMs (Time Division Multilplexers) and Telecom Transport Equipment.

●Experience with IP equipment, routers, servers, Ethernet switches, UPS systems including, Cisco, Juniper, Dell, Netgear, and other manufacturers and with CLI/terminal interface, Windows platform and Linux based routers, servers and Ethernet switches.

●Experience with IP scripting language and host and end user router and switch configurations.

●Experience with IPv6.

●Experience with Lucent 5ESS and associated OSS (UNIX).

●Experience with Santera and Taqua softswitches and associated OSSs.

●Experience with EXFO (FOT-600), FIS OPMs and light sources and EXFO and AFL VFLs.

●Experience with Lightel and EXFO fiber scopes.

●Experience with T-Berd 310 carrier analyzer and DS0/DS1 intrusive testing and passive (non-intrusive) monitoring through observation and analysis of equipment performance monitoring data.

●Experience with Sunrise Telecom Sunset T3 carrier analyzer and T3/T1/E3/E1 intrusive testing and passive (non-intrusive) monitoring through observation and analysis of equipment performance monitoring data.

●Experience with Digital Lightwave NIC Plus OC-192 Test Set and OC192/OC48/OC12/OC3 intrusive testing and passive (non-intrusive) monitoring through observation and analysis of equipment performance monitoring data.

●BERT testing experience on 10GB and 100GB ETH fiber optical circuits.

●Experience with EXFO FTB series OTDRs.

●Experience with both creating and following detailed MOPs to establish exact method of procedure for nature of work being performed.

●Project Management.

●Order Provisioning.

●Experience using and updating Telecommunications equipment and facilities inventory database software including Chipmunk, Netcracker, Granite, Xng, IPControl, TIRKS, HOMER, Oasis and CRM.

●Use of Telecom software including ProComm Plus, Hyperterminal, TEADS, CRM, Oasis, Access Service Request (ASR), Omnia, Granite, various One Ticketing Systems (OTSs/AOT), various Integrated Work Order Systems (WOSs/IWOSs), various billing systems (Omnia/CRM/Bill Trac Pro), various vendor software (Traverse, Flexr, etc.).

●Use of heat mapping software.

●Engineering, including Network Design, Circuit Design and Equipment Design.

●Ability to observe systems, collect data and complete necessary paperwork and reports.

●Ability to read, edit and create blueprints, electronic diagrams and schematics.

●Extensive experience and familiarity with power meters, volt ohmmeters other test and diagnostic equipment.

●Extensive experience with remote access testing, NOCC testing, on-site testing and Centralized Testing Support (CTS).

●Ability to analyze trouble and symptoms, isolate and identify trouble source(s) and enact immediate resolutions and provide post-diagnostic reports and recommendations for network improvement and failure prevention working alone or with other technicians, engineers or other technical teams.

●Experience with supervision, scheduling, delegation of work and inspection of scope of work, quality assurance of internal technicians, contractor, customer or client team members and third party work and workers that impact a network either directly or peripherally.

●Ability to work with and operate various hand tools, power tools and machinery.

●Ability to install and work with various hardware, equipment and cables.

●Ability to distinguish colors.

●Ability to work individually and in teams in stressful and demanding work environments.

●Ability to remain calm during high-pressure outage situations and when interacting with customers, vendors and various internal departments.

●Solid understanding of safety procedures and Personal Protection Equipment (PPE).

●Ability to study and absorb new technology and its applications in the marketplace.

●In depth knowledge of Telephony and various Transmission theory and practice, including ATM, TDM, HDSL, Ethernet, Sonet, SDH, CWDM, DWDM, RF, Wireless IEEE 802.11.

●Knowledge of Electrical theory and experience with various AC and DC power systems.

●Experience with air handling and HVAC systems and equipment.

●Strong organizational, communication and technical skills.

Contact this candidate