Sign in

Sheet Metal Engineer

Gurugram, Haryana, India
February 23, 2018

Contact this candidate




*, ******* *** *** ****, Balitikuri, Kalitala

Howrah – 711113, West Bengal, India

Near SNC Yamaha Motors (Two Wheeler Showroom) Mobile: +919********* II Email ID:

Career Objective

To meet the organization challenge by contributing knowledge for creativity and continuous improvement which learn from experience.

Present Career

Consultation for Concept and Cad designing of Casting, sheet metal and plastic Part / Product using CATIA V5 and CREO.

Career Summary

I am having twenty years experience in the field of vehicle body designing out of total 34 years experience. Major working areas as given below:

Supervising of Cad Centre, Drawing Office and Prototype Build.

Conceptual design of new component with required environment using CATIA V5 & PROE / CREO.

CAD Modeling and detailing of various types of sheet metal, plastic & alloy casting components and assembly for environment and fitment analysis using CATIA V5 & PROE / CREO.

CAD Drafting with GD&T for manufacturing using CATIA V5, PROE / CREO & AUTOCAD.

Bench marking and Reverse Engineering for input of design.

Strong math and geometry; strong understanding of technical language, designing of components (sheet metal & plastic) with layout, tooling constraints and draft.

Continuous improvement for easy manufacturing process and customer satisfaction.

Design data release through ECR and ECN.

Preservation of design data and documents with required format.

Performs other duties and serves as a backup for other staff and department as needed.

Worked Areas: (Automotive)

Designing of BIW (Interiors & Exteriors), Sheet metal, Plastic, Alloy Cast & Forging components, Vehicle Styling using Catia V5 Rel20; two Wheeler Body (sheet metal and Plastic) using PROE 2001, Reverse Engineering of two wheeler with FeroArm ; Class A surfacing of interior and exterior of Car and Truck using ICEM-Surf 4.1.

Worked Areas: (Others)

Designing of Industrial Fans, Ventilation and Air Pollution Control Systems, various type of material handling unit, pumps and valves.

Software Skill

Catia V5 - Proficient (working since 2009)

CREO 3 & 4 - Proeficient (working since 2016)

ICEM surf-4.1 - Familiar (worked from 2007 to 2010)

UG-NX5 - Familiar (worked from 2009 to 2010)

Catia V4 - Familiar (worked from 2007 to 2008)

Pro E-2001 - Familiar (worked from 1996 to 2006)

AutoCAD 2010 -Familiar (worked from2011to till date) and beginning with AutoCAD 14 at 1995 MS Office, Paint & PP - Familiar

Training Summary

Have undergone training in the field of engineering, product development and management at LML, EDAG, REVA and HM.

Experience (20 years in automobile + 12 years others = 32+ years total)

Vegazva Engineering Pvt. Ltd., Gurgaon & others, Kolkata - From Aug'14 - till date

Senior Designer / Consultant

Hindustan Motors Limited, Kolkata, India - From Jan’11- Jul’14

(Pioneer of car industry in India)

Dy. Manager – R&D

EDAG Engineering and designing India Pvt. Ltd. -From Jan’07 – Dec’10 (Pioneer of MNC automobile service industry in India)

Project Coordinator – Product development

LML Limited, Kanpur - India - From Jan’03 – Dec’06

(Pioneer of aesthetically good looking two wheeler industry in India)

Senior Engineer – R&D (Body)

Reva Electric Car Co Pvt Ltd, Bangalore – India - From Dec’00- Dec’02

(Pioneer of electric car industry in India)

Senior Engineer – R &D

LML Limited, Kanpur – India - From Jul’94 – Nov’00

(Pioneer of aesthetically good looking two wheeler industry in India)

Sr. Draftsman – R&D (Body group)

Calcutta Fan Works Ltd – Kolkata – India - From Feb’82 – Jun’94

(Pioneer of industrial fan in India)

Design Engineer - R & D

Common responsibilities for all organization

Essential Job Duties: Work with moderately complex and project coordination skills. Typically execute independent problem solving and decision making with broad guidance provided on overall project objectives and with specific guidance on program complexities. Decisions focus on prioritization, process and issues and usually involve moderate risk to the organization as results may have a long-lasting impact. Primarily involves intermediate to experienced level work.

1. Creates data and drawings as they are needed for the Product Engineering group.

2. Processes requests for specifications & other documents in respective area and responds to internal inquiries of general, technical, or specialized nature.

3. Transfers files to and from engineers, other designers, customers, and suppliers, manages CAD libraries and provides support to all departments within the organization.

4. Participates in continuous improvement processes, researches and recommends new products and/or processes, supplies input of ideas and/or direction of new projects having significant impact on the department.

5. Performs other duties and project work as necessary, serves as a backup for other staff as needed.

Responsibilities at Vegazva and Others

CAD Modeling and Detailing of components for various type of pump, valve, material handling unit and machine for civil construction.

Responsibilities at Hindustan Motors Limited

Vehicle integration (from conceptualization to release for production) for a vehicle variant based on existing car platform.

BIW, Exteriors, Interiors and Engine components design using CATIA V5 and PROE.

ECR, ECN, DFMEA, DVP&R, PPAP, BOM preparation and release for prototyping and series production.

Supervising of Prototype and CAD Centre.

Dimension management, tolerances, GD&T, 3D and 2D.

Projects executed

Design and Development of new Product Model Veer & Club7.

Gauge reduction of Ambassador Skin panels.

Design and development of four meter car with Ambassador Platform.

BIW and Plastic parts upgrade for BSIV engine in Ambassador Car.

Design and development of New Wiper design in Ambassador Car.

Design and development of DEMIST design in Ambassador Car.

Checking BIW 3D modeling as per drawing of Ambassador Car for CAE purpose.

Design and development of Low cost Cabin of LIGHT Commercial Vehicle.

Design and development of Ambassador RH drive to Ambassador LH drive car.

Prototype of Demist system, new Wiper system and new model Veer & Club7.

Responsibilities at EDAG Engineering and designing India Pvt. Ltd.

Checking of Class-A Surfacing with ICEM-Surf (4.4) for Truck of Nord Benz & AMW, Car of SAIC Motors & Mini Truck of GMC

Checking of 3D modeling and 2D drawing using CATIA V5, PROE & UG NX5 of various car components and assembly of GM.

Dimension management, tolerances and GD&T.

Worked in China and Brazil on behalf of EDAG.

responsibilities at LML Ltd.

Checking of 3D modeling and 2D drawing of component and assembly of various two wheelers (NV & Supremo scooter and Energy FX, Adreno, Freedom, Graptor & CD100 motor cycle) using PROE.

Dimension management, tolerances and GD&T.

Supervising for prototype

Reverse engineering with FEROARM and Renishaw.

Component and assembled drawing with drafting machine.

ECR, ECN, DFMEA preparation and release for prototyping and series production.

Worked onsite at Piaggio, Italy on behalf of LML, India for a period of 6 months.

Responsibilities at Reva Electric Car Co Pvt. Ltd.

3D modeling and 2D drawing of components & assembly of base model of REVA using PROE.

Supervising for CAD and prototype.

ECR, ECN, DFMEA, DVP&R, PPAP preparation and release for prototyping and series production.

Attending customer complain for solving.

Coordinating with other departments.

Feeding for vendor development.

Responsibilities at Calcutta Fan Works Ltd.

Designing with Drafting Machine, Erection & Commissioning of Fan (Air Circulator, Man Cooler, Axial Flow, Bifurcated, Roof Extractor, and Humidifier) and Air Pollution Control & Ventilation System as per customer specification.

BOM preparation and release for prototyping and series production.

Erection and Commissioning.

Education and Knowledge

Diploma in Mechanical Draftsmanship - 1981

From Central Training Institute (now Advance Training Institute) – Howrah – West Bengal – India.

Graduation (B-Com) – 1979

From Nara Singha Dutta College (under University of Calcutta) – Howrah – W.B. - India

Higher Secondary Examination - 1976

From Sri Ram Krishna Shikhshalaya (under WBSE) – Howrah – W.B. – India

Personal Details

Name : Dipak Koley

Father’s Name : Ajit Koley

Permanent address : No. 6, Library 1st Bye Lane, Baltikuri Kalitala, Howrah –711113, West

Bengal, India

Communication address : - Do -

Passport No. : K0505533, Valid until 13.06.2022.

Date of birth : 18.08.1959

Hobbies : Writing, sketching, playing Football and Cricket


I hereby declare that all the details furnished above are true to the best of my knowledge and belief.

Dipak Koley - Date:

Contact this candidate