CURRICULUM VITAE

JAYSON P. NATIVIDAD POSITION DESIRED; QA/QC MANAGER, QA/QC ENGINEER,

MATERIAL QUALITY MANAGER

WELDING ENGINEER, QA/QC INSPECTOR STRUCTURAL, MECHANICAL WELDING, PIPING, CIVIL

SHIFT ENGINEER/ PRODUCTION SUPERVISOR/ STRUCTURAL / WELDING SUPERVISOR

MAINTENANCE SUPERVISOR EXCHAINGER SUPERVISOR, WELDING INSTRUCTOR

Address: Purok 3 Puting Buhangin, Orion, Bataan Mobile No.+63-092******** / 091********

Email Add. ac4cc9@r.postjobfree.com

CAREER OBJECTIVE:

To obtain a position that will enable me to utilize my knowledge, skills and work experience to make a positive strategic and operational impact and succeed in a progressive team-oriented organization,A position as an active employee involving responsibility and work with others as a team member to achieve advancement and growth for the company.

PERSONAL INFORMATION:

Date of Birth : DEC. 13,1975

Place of birth : ORION, BATAAN.

Age : 40

Nationality : PILIPINO

Height : 5’ 9’’

Weight : 180 LBS

Civil status : MARRIED

Degree : BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING.

EDUCATIONAL ATTAINMENT:

TERTIARY LEVEL: BATAAN HEROES MEMORIAL COLLEGE.

COURSE: BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING.

DATE GRADUATED: MARCH 30, 2000.

SECONDARY LEVEL: THOMAS DEL ROSARIO ACADEMY

FOURTH YEAR HIGH SCHOOL.

DATE GRADUATED: MARCH 25, 1993.

PRIMARY LEVEL; DAAN PARE ELEMENTARY SCHOOL.

GRADE 1 TO SIX.

DATE GRADUATED : MARCH 26, 1989.

SEMINAR AND TRAINING ATTAINMENT:

TRAINING CENTER: DAELIM PHILIPPINES INCORPORATION (TWI, BSEN, CSWIP,WIS 5)

COURSE: WELDING INSPECTION COURSE,

DATE COMPLETED : JULY 29, 2013.

TRAINING CENTER: PHILIPPINE WELDING SOCIETY, INC.

COURSE: WELDING INSPECTION COURSE,

DATE COMPLETED: FEBRUARY 18, 2012.

TRAINING CENTER: RLB CAREER DEVELOPMENT AND TECHNOLOGICAL CENTER.

COURSE: HYDRO ELECTRIC POWER PLANT,

DATE COMPLETED: FEBRUARY 14-18, 2012.

TRAINING CENTER: PHILIPPINE SOCIETY MECHANICAL ENGINEERS.

WESTERN REGION - SAUDI ARABIA JEDDAH CHAPTER.

DATE COMPLETED: SEPTEMBER 8, 2006.

TRAINING CENTER: CTJV – RGX PROJECT, STATE OF QATAR.

COURSE: HAZARD IDENTIFICATION TRAINING

DATE COMPLETED: JUNE 25, 2008.

MERIT AWARD

HELD IN: PETRON BATAAN REFINERY RMP-2 PROJECT

AWARD: CERTIFICATE OF APPRECIATION

FOR SUCCESFUL AND REMARKABLE HANDLING AND SUPERVISORY OF (WQT) OF ALL WELDERS.

WELDERS QUALIFICATION TEST.

STARTING THE PROJECT UP TO PROJECT COMPLETION

AWARDING DATE: JUNE 16, 2014

TRAINING CENTER: MOHAMAMAD AL-MOJIL GROUP.

AL-WASIA, KINGDOM OF SAUDI ARABIA.

HELD IN: STABILIZER OFFICE CONFERENCE ROOM.

AWARD: CERTIFICATE OF MERIT.

REPRESENTED: TOP 3 OUT OF 13ROLL OF HONOUR.

BRIGHTEST AND BEST WORKFORCE.

DATE: MAY 31, 2004.

TRAINING CENTER: MOHAMAMAD AL-MOJIL GROUP.

DAMMAM, KINGDOM OF SAUDI ARABIA.

AWARD: CERTIFECATE OF COMMENDATION

AS SAFE WORKER OF THE MONTH HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : DEPARTMENT HEAD (QA/QC)

Company Name : SDC (SUBIC DRYDOCK COMPANY. INC)

Inclusive Date : OCTOBER 11, 2014 UP TO PRESENT

Country of Engagement : GLOBAL SITE, SBMA, SUBIC

Project : US NAVY SEAL SHIPS, US NAVY WAR SHIPS, CARGO SHIPS, CARRIER SHIPS,

OIL AND GAS SHIPS, RO-RO SHIPS, TUG BOATS, PHILIPPINE NAVY SHIPS, PHILIPPINE COAST GUARD SHIPS, BULK SHIPS, FLOATING DOCKS and MORE.

DUTIES AND RESPOSIBILITIES:

Roll Out Meeting.

Presentation of new ideas and procedure.

Attending meeting to all POEM, Docking Conference and inspection reports in every project.

Presentation for Quarter back Dept. meeting.

Presentation and hosting for every assessment activities.

Random audit for Department Quality check every Quarter of the year.

Documentation at Plant inspection to all accredited suppliers and contractors.

Testing Inspection and acceptance for all motors / materials on contractor shop prior to delivery.

Serve as liaison to Customer teams to develop systems solutions (requirements, user testing, etc.) to support logistics programs, including direct fulfillment. Partners with key cross-functional partners to solicit customer and associate feedback to identify program improvement opportunities for implementation.

Develop a new Forms, Standards, Manual, Process Flow and Memo’s as per ABS, NAVSEA, ASME, IACS.

Analyze and evaluates design concepts and integration support requirements to determine if concepts satisfy support requirements. Implements, monitors and adjusts solutions to ensure the integration of support considerations as needed. Analyses technology and distribution network trends and implements changes in department as appropriate.

Conduct regular meeting with Commercial (Sales / Marketing) & Product (BU/LOB) teams to gather and analyze all available information to create the best possible forecast (historical sales, phase in/phase out, cannibalization, causal factor, market trends, seasonality, promotions, special events inventory levels, price changes, lead-time etc

Proactively facilitating, re-engineering, best practices & consensus between functional experts (Demand Planning, Supply Planning, Sales & Marketing, Logistics and Finance)

Participate actively in projects teams, working on initiatives to improve forecast accuracy

Complete relevant reports (weekly & monthly) as and when directed.

Documentation and recording updating drawings base on plan details, checking updated details as per procedure.

Monitoring and recording of productions per group and per areas.

Direct, monitor and ensure compliance with company Quality Management System and written procedure. Base on (ITP, MS, WPS & QA/QC POLICY).

Ensure that materials delivered for the job are in accordance with purchased document and are free from any damage and non-conformities.

Checking updated isometric drawing and updated revision with their as built.

Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Inspection on Removal and Restoration/Recondition of exchanger, pumps, turbine, motors, reactors, and more.

Inspection on Pipeline and vessels if isolated before bolts opening for flange and also exchanger head and for other vessels.

Inspection on Removal and dismantling of old piping lines and installation of new line as per modification and rehabilitation details.

Responsible for the preparation /issuance of test form for welding procedure specification ( WPS )and welding performance qualification test (WPQT)

Witness and certify the in-house Welding Performance Quality Test.

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Develop and formulate programs in the preparation of policies/guidelines/work instruction to a specific related works.

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Coordinates the collection, evaluation, and dissemination of performance data relative to specified quality improvements programs.

Perform quality control to ensure adherence to contract specification and industry standards.

Conduct quality audits to determine effectiveness, training needs and opportunities for improvement the system.

Responsible to the Quality Assurance Manager/Quality Assurance Representative for the preparation of quality assurance/quality control policies, procedures/guidelines and actual application/implementation through monitoring/checking/actual surveillance.

On board on ships with Port Engineer and Crew ship/Owner as per sea trial.

Location of sea trials: Subic to Palawan, Laos, Vietnam, Japan, Guam, Marianas Island, G. Canal, Australia and Other Country.

HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : MATERIAL QUALITY ENGINEER (QAD)

Company Name : MWCI (MANILA WATER COMPANY INC)

Inclusive Date : SEPTEMBER 11, 2015 UP TO SEPTEMBER 20, 2016

Country of Engagement : MANILA, PHILIPPINES

Project : SEWER NETWORK PROJECT, WATER TREATMENT FACILITY PROJECT, UNDERGROUND PIPE & ABOVE GROUND PIPES INSTALLATION PROJECT.

DUTIES AND RESPOSIBILITIES:

Presentation of new ideas and procedure.

Attending meeting to all materials audit, and inspection reports in every project.

Presentation for Quarter back Dept. meeting.

Presentation and hosting for every assessment activities.

Random audit for subs Quality check every Quarter of the month.

Documentation at Plan inspection to all accredited suppliers.

Testing Inspection and acceptance for all materials prior to delivery.

Perform analysis of the NR product supply network to develop the tactical and strategic logistics network solutions to maintain product availability within target days of inventory at the warehouse and optimize the transportation.

Serve as liaison to Customer teams to develop systems solutions (requirements, user testing, etc.) to support logistics programs, including direct fulfilment. Partners with key cross-functional partners to solicit customer and associate feedback to identify program improvement opportunities for implementation.

Develop strategic warehouse network solutions to achieve efficient warehouse operations and stable product supply.

Develop new logistics capabilities aligning with the business requirements of the company.

Develop and execute warehouse and transportation business process and systems solutions to manage product supply availability and order fulfillment.

Perform mapping analysis on the warehouse business process and system current and future capability requirements. Provide recommendations for process and systems improvement to improve efficiency, data availability and quality, order/transfer turnaround time. Analyze, recommend and develop systems and tools to efficiently manage the logistics related activities.

Determine feasibility of designing new facilities or modifying existing facilities, based on factors such as cost, available space, schedule, technical requirements, or ergonomics.

Analyze and evaluates design concepts and integration support requirements to determine if concepts satisfy support requirements. Implements, monitors and adjusts solutions to ensure the integration of support considerations as needed. Analyses technology and distribution network trends and implements changes in department as appropriate.

Manage the execution of strategic logistics initiatives designed to maximize efficiency of order fulfilment, reduce implementation time of new business, meet client SLA’s, minimize costs to serve clients and provide agile and responsive distribution of Specialist team to service accounts.

Animate the monthly collaborative sales forecast process agreed upon consensus plan for a selected product portfolio for a country / zone and to ensure the forecast accuracy targets are achieved.

Conduct regular meeting with Commercial (Sales / Marketing) & Product (BU/LOB) teams to gather and analyze all available information to create the best possible forecast (historical sales, phase in/phase out, cannibalization, causal factor, market trends, seasonality, promotions, special events inventory levels, price changes, lead-time etc

Make recommended adjustments to forecast and inventory targets (input: forecast accuracy, forecast value–add, unhealthy stock level,) based on changes in demand and market trends.

Proactively facilitating, re-engineering, best practices & consensus between functional experts (Demand Planning, Supply Planning, Sales & Marketing, Logistics and Finance)

Participate actively in projects teams, working on initiatives to improve forecast accuracy

Complete relevant reports (weekly & monthly) as and when directed.

Documentation and recording updating drawings base on plan details, checking updated details as per procedure.

Monitoring and recording of productions per group and per areas.

Direct, monitor and ensure compliance with company Quality Management System and written procedure. Base on (ITP, MS, WPS).

Ensure that materials delivered for the job are in accordance with purchased document and are free from any damage and non-conformities.

Checking updated isometric drawing and updated revision with their as built.

Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Inspection upon Removal and Restoration of exchanger, pumps, turbine, motors, reactors, and more.

Inspection upon Pipeline and vessels if isolated before bolts opening for flange and also exchanger head and for other vessels.

Inspection upon Removal and dismantling of old piping lines and installation of new line as per modification and rehabilitation details.

Responsible for the preparation /issuance of test form for welding procedure specification ( WPS )and welding performance qualification test (WPQT)

Witness and certify the in-house Welding Performance Quality Test.

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Develop and formulate programs in the preparation of policies/guidelines/work instruction to a specific related works.

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Coordinates the collection, evaluation, and dissemination of performance data relative to specified quality improvements programs.

Perform quality control to ensure adherence to contract specification and industry standards.

Conduct quality audits to determine effectiveness, training needs and opportunities for improvement the system.

Responsible to the Quality Assurance Manager/Quality Assurance Representative for the preparation of quality assurance/quality control policies, procedures/guidelines and actual application/implementation through monitoring/checking/actual surveillance.

HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : QA/QC ENGINEER

(Modules, Piping, Welding, Structural, Mechanical)

Company Name : BECHTEL INTERNATIONAL INC.

Inclusive Date : JULY 14, 2014 UP TO OCTOBER 11, 2015

Country of Engagement : SEAFORD VICTORIA, AUSTRALIA

Project : SEAFORD VICTORIA PHASE 4 & 5 OIL AND GAS PROJECT

(OFFSHORE)

Project : SEAFORD VICTORIA PHASE 2 & 3 SHUT DOWN OIL AND GAS

PROJECT (OFFSHORE)

DUTIES AND RESPOSIBILITIES:

Documentation and recording updating drawings base on plan details, checking updated details using C.I.M.S format as per procedure.

Monitoring and recording of productions per group and per areas.

Direct, monitor and ensure compliance with company Quality Management System and written procedure. Base on (ITP, MS, WPS).

Ensure that materials delivered for the job are in accordance with purchased document and are free from any damage and non-conformities.

Checking updated isometric drawing and updated revision with their as built.

Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

( for shutdown Inspection )Removal and Restoration of exchanger, pumps, turbine, motors, reactors, and more.

( for shutdown Inspection )Pipeline and vessels if isolated before bolts opening for flange and also exchanger head and for other vessels.

( for shutdown Inspection )Removal and dismantling of old piping lines and installation of new line as per modification and rehabilitation details.

Responsible for the preparation /issuance of test form for welding procedure specification ( WPS )and welding performance qualification test (WPQT)

Witness and certify the in-house Welding Performance Quality Test.

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Develop and formulate programs in the preparation of policies/guidelines/work instruction to a specific related works.

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Coordinates the collection, evaluation, and dissemination of performance data relative to specified quality improvements programs.

Perform quality control to ensure adherence to contract specification and industry standards.

Conduct quality audits to determine effectiveness, training needs and opportunities for improvement the system.

Responsible to the Quality Assurance Manager/Quality Assurance Representative for the preparation of quality assurance/quality control policies, procedures/guidelines and actual application/implementation through monitoring/checking/actual surveillance.

HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : QA/QC WELDING AND PIPING INSPECTOR

Company Name : YUHANTECH PHILIPPINES INCORPORATED.

Inclusive Date : OCTOBER 23, 2012 UP TO JUNE 13, 2014.

Country of Engagement : PETRON BATAAN REFINERY. Limay, Bataan, Philippines 2103.

Project : PETRON REFINERY MASTER PLAN 2 (RMP-2) PROJECT.

DUTIES AND RESPOSIBILITIES:

Documentation and recording updating drawings base on plan details, checking updated details using C.I.M.S format as per procedure.

Monitoring and recording of productions per group and per areas.

Direct, monitor and ensure compliance with company Quality Management System and written procedure. Base on (ITP, MS, WPS).

Ensure that materials delivered for the job are in accordance with purchased document and are free from any damage and non-conformities.

Checking updated isometric drawing, blue prints and updated revision with their as built.

Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Responsible for the preparation /issuance of test form for welding procedure specification ( WPS )and welding performance qualification test (WPQT)

Witness and certify the in-house Welding Performance Quality Test.

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Develop and formulate programs in the preparation of policies/guidelines/work instruction to a specific related works.

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Coordinates the collection, evaluation, and dissemination of performance data relative to specified quality improvements programs.

Perform quality control to ensure adherence to contract specification and industry standards.

Conduct quality audits to determine effectiveness, training needs and opportunities for improvement the system.

Responsible to the Quality Assurance Manager/Quality Assurance Representative for the preparation of quality assurance/quality control policies, procedures/guidelines and actual application/implementation through monitoring/checking/actual surveillance.

HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : QA/QC WELDING INSPECTOR

Company Name : NEPC

Inclusive Date : SEPTEMBER 27, 2011 UP TO OCTOBER 20, 2012.

Country of Engagement : BRGY. CAMAYA, ALAS-ASIN, MARIVELES, BATAAN, PHILIPPINES, 2103.

Project : GN POWER2X300 MW MARIVELES, COAL POWER

STATION PROJECT

DUTIES AND RESPOSIBILITIES:

Ensure that materials delivered for the job are in accordance with purchased document and are free from any damage and non-conformities.

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Direct, monitor and ensure compliance with company Quality Management System and written procedure. Base on (ITP, MS, WPS).

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Checking updated isometric drawing and updated revision with their as built.

Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Arranging and preparation of WQT I.D’ for all qualified, checking and updating of rejection rate ratio.

Responsible for the preparation /issuance of test form for welding procedure specification ( WPS )and welding performance qualification test (WPQT)

Witness and certify the in-house Welding Performance Quality Test.

Preparation of request for inspection (RFI), arranging and processing of initial joints (1st production join for new welders).

Radiographic test (R.T) must be done for all selected joints including test coupon of (WQT).

Perform quality control to ensure adherence to contract specification and industry standards.

Conduct quality audits to determine effectiveness, training needs and opportunities for improvement the system.

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Responsible to the Quality Assurance Manager/Quality Assurance Representative for the preparation of quality assurance/quality control policies, procedures/guidelines and actual application/implementation through monitoring/checking/actual surveillance.

HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : QA/QC WELDING & PIPING ENGINEER

Company Name : (CTJV) CONSOLIDATED CONTRACTORS TEYSEER JV Ltd.

Inclusive Date : APRIL 29, 2008 UP TO FEBUARY 26, 2011.

Country of Engagement : RAS LAFFAN, INDUSTRIAL CITY, STATE OF QATAR.

Project : RAS LAFFAN GAS (RLX) LIQUIFIED NATURAL GAS LINE

PROJECT

DUTIES AND RESPOSIBILITIES:

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Develop and formulate programs in the preparation of policies/guidelines/work instruction to a specific related works.

Ensure that materials delivered for the job are in accordance with purchased document and are free from any damage and non-conformities.

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Checking updated isometric drawing and updated revision with their as built.

Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Responsible for the preparation /issuance of test form for welding procedure specification ( WPS )and welding performance qualification test (WPQT

Witness and certify the in-house Welding Performance Quality Test.

Radiographic test (R.T) must be done for all selected joints including test coupon of (WQT).

Preparation of request for inspection (RFI), arranging and processing of initial joints (1st production join for new welders).

Arranging and preparation of WQT I.D’ for all qualified, checking and updating of rejection rate ratio.

Perform quality control to ensure adherence to contract specification and industry standards.

Conduct quality audits to determine effectiveness, training needs and opportunities for improvement the system.

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Responsible to the Quality Assurance Manager/Quality Assurance Representative for the preparation of quality assurance/quality control policies, procedures/guidelines and actual application/implementation through monitoring/checking/actual surveillance.

( for shutdown Inspection )Removal and Restoration of exchanger, pumps, turbine, motors, reactors, chimney, flair and more.

( for shutdown Inspection )Pipeline and vessels if isolated before bolts opening for flange and also exchanger head and for other vessels.

( for shutdown Inspection )Removal and dismantling of old piping lines and installation of new line as per modification and rehabilitation details.

( for shutdown Inspection ) Modification of pipe for underground, above ground installation and tie in.

HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : QA/QC ENGINEER

Company Name : (CTJV) CONSOLIDATED CONTRACTORS TEYSEER JV Ltd.

Inclusive Date : OCT.16, 2007 UP TO JULY 20, 2008.

Country of Engagement : RAS LAFFAN, INDUSTRIAL CITY STATE OF QATAR.

Project : QATAR GAS (RG-2) TRAIN 4,5,6,7 LIQUIFIED NATURAL GAS

LINE PROJECT

DUTIES AND RESPOSIBILITIES:

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Develop and formulate programs in the preparation of policies/guidelines/work instruction to a specific related works.

Ensure that materials delivered for the job are in accordance with purchased document and are free from any damage and non-conformities.

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Checking updated isometric drawing and updated revision with their as built.Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Responsible for the preparation /issuance of test form for welding procedure specification (WPS) and welding performance qualification test (WPQT).

Witness and certify the in-house Welding Performance Quality Test.

Radiographic test (R.T) must be done for all selected joints including test coupon of (WQT).

Preparation of request for inspection (RFI), arranging and processing of initial joints (1st production join for new welders

Arranging and preparation of WQT I.D’ for all qualified, checking and updating of rejection rate ratio.

Perform quality control to ensure adherence to contract specification and industry standards.

Conduct quality audits to determine effectiveness, training needs and opportunities for improvement the system.

Assist the Production Superintendent to ensure that all works is carried out in accordance with approved work instruction.

Responsible to the Quality Assurance Manager/Quality Assurance Representative for the preparation of quality assurance/quality control policies, procedures/guidelines and actual application/implementation through monitoring/checking/actual surveillance.

HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : QA/QC INSPECTOR

Company Name : HYUNDAI HEAVY INDUSTRIES CO. LTD.

INDUSTRIAL PLANT & ENGINEERING DIVISION.

Inclusive Date : DECEMBER 11, 2005 UP TO AUGOST 5, 2007.

Country of Engagement : RIYADH, KINGDOM OF SAUDI ARABIA.

Project : DHURMA PP 11 PROJECT.

DUTIES AND RESPOSIBILITIES:

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Ensure that materials delivered for the job are in accordance with purchased document and are free from any damage and non-conformities.

Checking updated isometric drawing and updated revision with their as built. Marking& making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Responsible for the preparation /issuance of test form for welding procedure specification ( WPS )and welding performance qualification test (WPQT

Conduct quality audits to determine effectiveness, training needs and opportunities for improvement the system.

Arranging and preparation of WQT I.D’ for all qualified, checking and updating of rejection rate ratio.

Perform quality control to ensure adherence to contract specification and industry standards

HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : QC INSPECTOR

Company Name : MOHAMMAD AL-MOJIL GROUP.

CONSTRUCTION ONSHORE DIVISION.

Inclusive Date : FEBUARY 01, 2004 UP TO SEPTEMBER 11, 2005.

Country of Engagement : RIYADH, KINGDOM OF SAUDI ARABIA.

Project : PHASE V1 REACTOR STRETCH SHUTDOWN FOR KEMYA MAJOR

PROJECT IN JUBAIL

DUTIES AND RESPOSIBILITIES:

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Ensure that materials delivered for the job are in accordance with purchased document and are free from any damage and non-conformities.

Checking updated isometric drawing and updated revision with their as built. Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Marking & making a comment work for new points, additional joints & making a detail on new line for isometric drawing as built.

Responsible for the preparation /issuance of test form for welding procedure specification ( WPS )and welding performance qualification test (WPQT

Conduct quality audits to determine effectiveness, training needs and opportunities for improvement the system.

Arranging and preparation of WQT I.D’ for all qualified, checking and updating of rejection rate ratio.

Perform quality control to ensure adherence to contract specification and industry standards.

( for shutdown Inspection ) Modification of pipe for underground, above ground installation and tie in.

( for shutdown Inspection )Removal and Restoration of exchanger, pumps, turbine, motors, reactors, chimney, flair and more.

( for shutdown Inspection )Pipeline and vessels if isolated before bolts opening for flange and also for exchanger head and for other vessels.

( for shutdown Inspection )Removal and dismantling of old piping lines and installation of new line as per modification and rehabilitation of line.

HIGHLIGHTS OF WORK EXPERIENCE:

Position Held : QC INSPECTOR

Company Name : MOHAMMAD AL-MOJIL GROUP.

CONSTRUCTION ONSHORE DIVISION.

Inclusive Date : MAY 15, 2002 UP TOFEBUARY 01, 2004

Country of Engagement : DAMMAM, KINGDOM OF SAUDI ARABIA.

Project : CONBINED CYCLE POWER PLANT.

DUTIES AND RESPOSIBILITIES:

( for shutdown Inspection )Removal and Restoration of exchanger, pumps, turbine, motors, reactors, chimney, flair and more.

( for shutdown Inspection )Pipeline and vessels if isolated before bolts opening for flange and also for exchanger head and for other vessels.

( for shutdown Inspection )Removal and dismantling of old piping lines and installation of new line as per modification and rehabilitation of line.

( for shutdown Inspection ) Modification of pipe for underground, above ground installation and tie in.

Conduct inspection and acceptance of all purchased materials and consumables, production work activities.

Ensure that

Contact this candidate