NELVYN C. GAYRAMON, RME

Sitio **, Malapag, Carmen, North Cotabato

Contact No: 099********

Email Address: ac4akm@r.postjobfree.com

PROFESSION and EDUCATIONAL ATTAINMENT

Registered Mechanical Engineer (PRC No. 0080503)

Bachelor of Science in Mechanical Engineering

University of Southern Mindanao, Kidapawan City Campus (2007- 2012)

PROFILE

To take up the responsibilities of a Mechanical Engineer, where make effective use of my mechanical knowledge in a highly and efficient manner. A hardworking and optimistic, passionate to acquire more skills and experiences and noted for good leadership skill. Good leveraged to communicate, connect and work with others, God-fearing, well principled and flexible under pressure with strong sense of ethics.

PROFESSIONAL STRENGTHS

Possess excellent decision - making and time management skills

Ability to solve complex problems by using scientific rules and methods

Excellent knowledge of mathematical concepts with good command over verbal and written communications

Ability to work under pressure and handle multiple tasks

WORK EXPERIENCE

MJ Villanueva Construction Inc. (Km 8 Parenas Compound, Buhangin, Davao City)

Motorpool Department

Motorpool Head (Management Trainee) (December 21, 2017 – Present)

Plans, schedules and supervises the operation, repair and maintenance of vehicles and motorized equipment assigned to the motor pool for the transportation of parts, crude oil, materials needed and any demand from the respective sites.

Responsible for implementation of company's policy with respect to employee's performance, discipline and other personnel and administrative matters.

Monitors use of motor pool vehicles, ensures inspections at required intervals, plans and supervises schedules, and schedules repair and maintenance of vehicles and equipment.

Managed all vehicles and heavy equipment’s to maintain in a good condition.

Coordination with the Site Managers/Engineers regarding the scheduling of vehicles, equipment’s, drivers and operators for the use and assign in the sites.

Coordination with the Chief-mechanic and mechanics regarding the condition of every vehicles and heavy equipment’s.

Inspect preventive maintenance schedule for all vehicles and ensures that vehicles are inspected and undergo maintenance as required.

Responsible for monitoring fuel consumption for each vehicle, comparing to mileage and usage records and investigate any irregularity.

Coordination with our local technician or suppliers for the repair and maintenance which cannot be performed in-house especially in high end vehicles and equipment’s and of every part that we needed in scheduling a repair and maintenance.

Conduct toolbox meeting for daily activities for the coordination, scheduling of the drivers, operators, mechanics and staffs.

Coordination of renewal of LTO registration and Insurance (CTPL) of vehicles through our office staff.

Responsible for inventory control of all vehicles, automobile and special equipment parts.

Received and signed all papers and documents regarding the motor pool protocol and procedures.

Managed and supervised the motor pool area to ensure the cleanliness and maintain a safety environment.

Busco Sugar Milling Company Inc. (Busco, Butong, Quezon, Bukidnon)

Materials and Reliability Engineering Department

Staff Engineer (December 13, 2015 – July 16, 2016)

Responsible in predictive maintenance, conduct/perform periodic Condition Base Monitoring (CBM), Data Collection and vibration monitoring either by individual or by group using CBM instrument-Entek IRD Mechanalysis Model DataPac 1500 and Pruftechnik VibXpert II to all equipments running about 300 up to 8,000 rpm around the entire factory area as per daily schedule of activities. The areas covered for routes are the following: Process, Mills, Boilers, EMSO (Spray pond, Factory pump house, fans/WWT Blowers and Refinery Department).

Report generation of the equipments using our Condition Base Monitoring program/computer software EMONITOR ODYSSEY DELUXE/PRUFTECHNIK VIBXPERT II program which we concluded that has a problem in vibration, mechanical looseness, bearing condition, etc. that can affect in the plant operation.

Perform dynamic balancing both shop and in-place (using the instrument Entek IRD Model DataPac 1500 and Pruftechnik VibXpert II) of equipments such as fans, centrifugal basket, centrifugal pumps, or any rotating equipment that has unbalanced problem during operation.

Perform thermograph or thermal reading (infrared camera Flir T200) both mechanical and electrical such as electrical panels, circuit breakers, contactors, electrical lineage, piping’s, insulators, etc.

Perform Laser shaft alignment (Easy Laser E420) intended for coupling to coupling or shaft to shaft machine train equipment such as steam turbine to gearboxes, electrical motor to pumps, and electrical motor to fans or any machine train equipment’s (horizontal and vertical alignment).

Conduct ocular inspection of all rotating equipments/machine such as centrifugal basket, couplings, fans, blowers, belt drive etc. (Nova Stroboscope BBX).

Ultrasonic testing or NDT (GE USM35) for thickness gauging, crack testing and using Dye Penetrant of those equipment’s or materials that involve in the operation.

Busco Sugar Milling Company Inc. (Busco, Butong, Quezon, Bukidnon)

Mills Department

Mill Tender (May 20, 2015 – December 12, 2015)

During off-season works, responsible in repair and maintenance of mill rollers for extraction of cane juice and check-up and repair all necessary problem or defect during milling season.

Responsible to assemble the mill rollers in required given settings. To make sure that the actual setting acquired to make good the result in extraction of the cane juices.

During milling season, I am responsible of maintaining the good operation of the mill equipments such as Six(6) sets of mill rollers including the maceration pumps for the cane juices.

Monitor and check-up the temperature of the mill roller bearings, head and tail shaft bearings of elevators and its lubrication line.

Monitor and interpret the Control System (CS) alarm indication of equipment malfunction and coordinate with Shift Supervisor and Control Panel Operator for alarm rectification.

Monitor and check-up the pressure of the journal bearing for top roll mill rollers.

Monitor the parameters of extraction of last mill rollers set for final product which the cane juices for processing and cane baggase to feed for Boilers.

Busco Sugar Milling Company Inc. (Busco, Butong, Quezon, Bukidnon)

Mills Department

Turbine Tender (October 2014 – May 19, 2015)

During milling season, responsible in one(1) unit of 3400 KW steam turbine and six(6) units of 900 KW steam turbine, to drive the mill rollers, cane cutters and cane shredder using the reduction gearboxes.

Responsible for start-up and shutdown of steam turbines, auxiliaries including synchronization of equipments when time in operation such as the valves (drainage valve, steam trap, exhaust and main line valve).

Conduct four times per eight hours checklist monitoring in equipments such as the pressure (main steam, exhaust, chest, auxiliary pump, primary and secondary gearbox oil pressure) and temperature of bearings of Steam Turbines and Reduction Gearboxes, and for cane cutters.

Conduct weekly shutdown for preventive maintenance and repair of the equipments, which noticed in operation time that there is need to be repair or condition.

Trouble shooting of steam turbines and gear boxes in off-season work. Parts of Steam Turbine and gear boxes for check-up, repair and condition.

Assist the implementation of plant policies, SOP’s, Safety procedures, Good housekeeping and energy conversation guidelines.

Busco Sugar Milling Company Inc. (Busco, Butong, Quezon, Bukidnon)

Mechanical Maintenance Department

Turbine and Gearboxes Maintenance (January 2014 – October 2014)

Responsible in operation to repair any related mechanical equipments such as steam turbines, gear boxes, pumps, conveyors, centrifugal machines, compressors, fans and blowers, cranes and hydraulic cylinders during milling season.

Conduct daily monitoring checklist in production equipments, oil level, sealing’s, and bearing condition.

Conduct preventive maintenance of the equipment, to prevent breakdown of equipments and company downtime.

Conduct weekly shutdown works for repair and maintenance of the equipments.

Conduct an oral and actual repair for familiarization and mastery of equipments for effective and good maintenance mechanic.

During Off-season works, responsible in major priorities which was the Steam Turbine and Gearboxes. Trouble shooting, repair and condition of the unit, check-up the bearing, seals, lubrication line, oil pumps, etc.

Busco Sugar Milling Company Inc. (Busco, Butong, Quezon, Bukidnon)

Trainee (May 2013 – January 2014)

Assigned to all departments and trained for their respective works and functions in operation (Boilers, Shift Maintenance Department (SMS), Mills Department, Raw Process, Refinery Process, Property and motor pool, Sugar Molasses and Warehouse.)

Assigned to recognize the equipments installed facilities and their individual functions.

Mastery of process flow diagram both Raw and Refined Sugar and their equipments, parameters in operations.

New City Commercial Cooperative – Head Quarters

(NCCC-HQ) Group of Companies

Trainee (OJT)

Davao City, Philippines

April- May 2011

Assigned the tasks of reading and interpreting blueprints, computer generated reports, technical drawings and schematics

Handled the tasks of diagnosing faulty operation, make necessary recommendations to the maintenance crew

Performed the tasks operating and maintaining smooth functioning of machines and equipment

TECHNICAL SKILLS

Possess in Windows, PowerPoint, Word, and Excel

Possess skills in 2D and 3D Auto CAD, Google Sketch Up Pro and Hand Sketching

Basic Electronics, Basic Electrical Engineering, Welding, Oxy-Acce and plasma Cutting, Machine Shop Practice

AFFILIATIONS

Philippine Society of Mechanical Engineers (Bukidnon Chapter),Member

Junior Philippine Society of Mechanical Engineers (Mt. APO Chapter),Member

Mechanical Engineering Student Society (MESS)

Christian Brotherhood International (CBI)

PERSONAL INFORMATION

Date of Birth: December 28, 1989

Place of Birth: Malapag, Carmen, North Cotabato

Permanent Address: Sitio 29, Malapag, Carmen, North Cotabato

Gender: Male

Age: 28

Height: 5’4”

Marital Status: Single

Religion: Iglesia Ni Cristo

Employment Status: Full Time

Contact this candidate